ISight not working after Snow Leopard update?

I just realized my iSight isnt working. I dont see it in System Profiler and I remeber prior to the Snow Leopard upgrade the iSight was working fine. This was three months ago, since the update i never had to use it until now. I tried resetting the SMC, I tried the command + option + p + r and still nothing.

• If you have not already done so, restart Mac and
    try again. If the iSight still does not work, continue.
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, (are you certain that you
   used the correct "reset" procedure?), yours may be a
   hardware problem that will require a professional fix.
   Unless you have a current backup, make one now.
Then consider the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
• If I understand correctly, you are now using Snow Leopard.
   If you want to try one more thing on your own before
   seeking professional help. use Disk Utility to repair permissions.
   Then download and apply the latest Combo Update
   for your OS. The latest SL Combo Update at present is here:
     http://support.apple.com/kb/DL1399
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates
can sometimes correct problems like yours.

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

To anyone with an HP printer/scanner device,
After being frustrated with my HP Photosmart C4580 not being able to scan for over an hour (scouring the forums, HP's website etc), I've come to realize my problem. Note that this has only been tested on a device that is plugged in DIRECTLY to your mac. I have not tried this over the network and do not plan to since my house is not set up for that.
Anyone who is having any issues with their device, UNINSTALL the HP software. The software is simply incompatible with SL and will mess up your devices! HP even says so on their website (see link below)!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
This is easily done by going to your applications folder > Hewlett Packard > HP Uninstaller. After using the uninstaller to uninstall HP's apps from your computer unplug your scanner from your computer and power supply. Now to make sure there are NO printers registered with your computer that could possibly mess up the fresh driver install, go to System Preferences > Print & Fax. Right click anywhere in the left pane (where any printers you have/had installed will be located) and click "Reset Printing System". This will wipe out any traces of a printer so you can start a-new.
Now, restart your computer. After it is restarted, plug your printer into the power source, then when it is fully booted up you may plug it into your USB slot. Then, go to System Preferences > Print & Fax. Click on the "+" (which will give you the interface to add your printer), select your printer (which you should note will say "USB Multifunction" instead of "USB" which is what showed up with the HP software still installed), and click "add". Your mac will do the rest (installing the drivers and such) and you should be able to print & scan as usual.
Note that you will need to scan using Preview, Image Capture, or your Printer Queue due to the changes with Snow Leopard (see the HP link above to learn how to use these). Your device should now properly show up when you use these applications to try and scan now.
-Mike S

@lakewood - there is nothing specifically in Software Update if you upgrade from Leopard to Snow Leopard. For me anyway..seems like thats the case for everyone though.
@ruger - so it won't even let you hit the '+'? For me, I had to hit the '+' to get it to install which in turn automatically downloaded the proper software/drivers for my device. if i were you, i'd see if i could get that to happen and hit '+' to install it. also - make sure you don't have any of the HP software on your computer also (use the uninstaller provided!)..that was really what did the trick for my machine. HP has come out and specifically said to not use the device manager, but that didn't quite do it for me. i had to uninstall everything that came on that CD (its all located in applications > Hewlett-Packard and, like i said, can be uninstalled easily using the provided uninstaller).
if all else fails, what i've also heard helps is just to reinstall snow leopard. that'll make sure everything is fresh. i'd delete all your printers like i outlined in my first post first THEN reinstalling it if you wish to go that route. however, it really does sound like the driver is messed up if its pausing and works fine with time capsule. idk how old the printer is, but sometimes with older models, the support blows. i apologize if none of this helps whatever the reason for your troubles may be, though.
Good luck,
-Mike S
PS: printers are always terrible to upgrade on everyone's end. consumers, operating systems, and manufacturers. it stinks that nothing can be generic and run similarly anymore =/

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

Aperture 2.1.4 update will not load after Snow Leopard update

Has any one found the fix for aperture 2.1.4 update not loading after the installation of Snow Leopard. I to am also getting the alert "aperture 2.0 or later is required to install the update". I installed my copy of aperture 2.1 using the installer with no problems so the program is in the correct location. I've seen the posts related to this problem and it does not seem a fix has been found.

Just ran into this myself. I did check to see if there was a preference to delete under ~/Library/Preferences and one is not created since 2.1 is never actually launched. 2.1 is sitting in the root of Applications and hasn't been renamed, but the 2.1.4 update just doesn't detect that it is there and just gives the alert "Aperture 2.0 or later is required to install this update."

Airporter does not work after snow leopard upgrade

I upgraded my old macbook to snow leopard, and the Time Capsule can not detect the disk drive on the Airporter. The laptop has no problem using airporter to get to the internet, and the airport utility can see the disk drive. After the install of snow leopard, I saw the time capsule, and it asked if I wanted the file recovered from the time capsule. This seemed to work perfectly, and made the upgrade painless except my time capsule does not work anymore.

I have the metadata.mds.plist but I do not have the Spotlight.plist as well. Regarding a fix, I had a similar issue with Spotlight's index when I upgraded one of my iMacs. A clean install, properly resolved the issue. I'd be curious if a reinstall of Snow Leopard would take care of the issue, as the A&I feature isn't there anymore I've yet to determine what exactly the install of SL over SL would do. My understanding is that the A&I is performed, it's just not called as such.

MPEG-2 Playback not working after Snow Leopard upgrade

Something I need all the time is MPEG2 playback in Quicktime and to ability to convert from MPEG2. in MPEG Streamclip.
What I have found out is Snow Leopard deletes the file in library/quicktime when you install.
I have followed the instructions to go back in the time machine, get the file, restore it back into the library/quicktime file
Done all that, rebooted etc....still nothing
I have also found the quicktimeMPEG2 components installer and that doesn't work either
I desperately need this to work as my business relies on it.
Any help appreciated
Cheers
Paul

What error message do you get with the dmg installer? I have just tried an MPEG2 file, after upgrading to SL, QT reported it required the meg2 component. I found the original dmg file I purchased and it installed OK and works with QT 10.
Before trying to install again it may be worth repairing permissions on you disk.

Login Keychain not working after recent Leopard update

Hi, I've been out of town for the last few weeks and upon returning, I pulled down the most recent updates. Since then, I'm being prompted to enter my keychain password every time I need to access an application. The issue is that when I type my password in, the system is telling me that the password is inaccurate and I am 100% certain that I am typing the correct password in. I ran the Keychain Access "Verify" and then "Repair" and I get the following result. What should I do next?
Repair started
Checking keychain configuration for Administrator (user ID=501)
Home directory is /Users/admin
Checked login keychain
Checked password for ~/Library/Keychains/login.keychain
Password for ~/Library/Keychains/login.keychain is not the same as login password, so keychain can't be unlocked automatically
Login password could not be synchronized with keychain ~/Library/Keychains/login.keychain (-128)
Unable to read settings for ~/Library/Keychains/login.keychain
Checked default keychain
Checked keychain search list
Checked contents of ~/Library/Keychains/login.keychain
Checked contents of ~/Library/Keychains/admin.keychain
Warning: some problems were not fixed
Repair failed
Thanks in advance!

After using Leopard for awhile, I think the "Login" keychain, is the same as your login password, and Leopard asks you over and over again for your "Login" keychain password and I kept putting in my keychain password which was wrong, I finally put in my standard login and it accepted that password. I have no idea why, but I am glad someone else had the same problem....I thought Leopard only hated me!

Aperture will not work after snow leopard instalation,

Hi,
I have avoided upgrading to Snow Leopard but my children bought me the upgrade for Christmas as they want me to use Face Time. So I did, now aperture will not open and it says contact the originators of the program. I am a pro photographer and all my current work is on Aperture and I have a wedding in two days time and so this is somewhat disturbing as all my post production in done in Aperture. Can anyone help me I have done all the software upgrades etc.....

Are your images files managed in the Aperture Library, or Referenced? Do you have an external disk drive in the configuration, and if so, is it formatted as Mac OS Extended?
If you hold down the Option key while clicking on the Aperture Icon in the Dock, do you get the dialogue that allows choosing between different Aperture Libraries, or even creating a New Library?
Ernie

TS3479 quick time not working after snow leopard install?

Made video's on my iphone and loaded them to my imac. Video did not work in iphoto. No Quick time pop up. what happened? Snow leopard install.

You need to re-install iPhoto because it's missing bits of itself:
Library not loaded...
Reason: no suitable image found.
Looking at the missing files it's possible that it's missing from the OS. But start with re-installing iPhoto, and if that fails you'll ned to re-install the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD

IPhoto movies won't work after Snow Leopard update

I recently updated to Snow Leopard an now my iPhoto movies wont' play. Any ideas?

I have contacted autodesk to update my license but this hasn't worked.
Hasn't worked how? I don't know anything about Maya, but a lot of things changed under-the-hood in Snow Leopard, meaning a lot of programs broke. Are you running the most recent version of Maya, and is that version supposed to work on SL?

LaCie DVD Burner not working since Snow Leopard update

Hi there, I'm searching the web for this one for some time now. Since I upgraded my MacBook to Snow Leopard (Currently I'm on 10.6.4) my LaCie DVD Burner doesn't work anymore.
The external DVD burner is connected trough USB to my MacBook and it was always working nicely. But since the upgrade to snow leopard the macbook doesn't even 'see' him anymore. I used to use Toast Titanium to burn my disks, but since the upgrade this tool doesn't recognize the DVD burner anymore.
Is this a known issue? In the mac info I can't see the LaCie burner.
Hope you guys can help me out on this one!
Regards,
Douwe Pieter van den Bos

I just noticed a problem with my Lacie dvd/cd superdrive also. I install any disk blank or formatted and the drive just hums and clicks and opens up the tray. I contacted Lacie and they don't even have the drive on the lists of products they sell. I wrote them an email and we cleared that up (took several days). It took me 8 days before I finally got fed up with dumb questions like "did you try another power supply?" Where am I going to get another one of those? How could the problem possibly be a power supply when the drive is recognized in Disk Utility, System Profiler etc. I can open and close the tray by pushing the tray button or open the tray from Disk Utility. They basically wanted a blank check for me to send them the drive to have it fixed.
My question is it possible I somehow affected the drive during my last upgrade? Or is it just a dirty laser? Is it worth getting a cleaning disk? Do they work even if Pioneer doesn't recommend using them? Maybe someone knows if I could at least use the chassis and get a newer better drive?
What really bothers me is that it cost well over 2 hundred when I got it and I've used it less than
8 times to burn.

Safari will not work after Snow Leopard Install

Safari does not work. It opens briefly, then closes. I get a message to "click reopen to open application again," but the same thing happens. Please advise.

Janice,
Quit Safari if it's open.
Locate this file. com.apple.safari.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Desktop.
Launch Safari. If it launches without crashing, then that .plist file is corrupted. Drag it to the Trash, empty the Trash and restart your Mac.
If Safari still crashes...
Go to ~/Library/Caches/Safari and delete all the sub-folders within that one.
Go to /Users/YourName/Library/Safari and delete Home/Library/Safari and delete any of these files you have there:
Downloads.plist
History.plist
LastSession.plist
Carolyn
Message was edited by: Carolyn Samit

Isight not working after 10.9 update

Hi,
I have gone through and read all the advice on this issue. The iSight wasn't working in mountian lion but managed to solve that problem. Updated to 10.9 now the isight doesn't work in any Mac applicaiotn or thrid party application. The camera does not show up in the system profiler.
I have tried,
Making sure all software is up to date
Resetting the SMC
Reinstalling 10.9
When I tried to reinstall 10.9 I get the message that 10.9 can not be installed on this machine.
Now I am out of options.
Any suggestions?

Bridgers872 wrote:... Updated to 10.9 now the isight doesn't work... I tried to reinstall 10.9 I get the message that 10.9 can not be installed on this machine...
Because you have already updated to 10.9, you KNOW that 10.9 can be installed on your MBA.
Shut down (do not merely use the  > Restart...) menu command. Wait about one minute before you start your MBA again. Then follow Apple's instructions to Reinstall OS X Mavericks.
Now try your camera again using the method suggested in How to Troubleshoot iSight. (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same troubleshooting method and remedies apply.)
Message was edited by: EZ Jim
Mac OSX 10.9

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

ISight not working after Snow Leopard update?

Similar Messages

Maybe you are looking for