ISight not working, not found camera

I'm using macbook pro retina 2013, has just update OS X 10.9.2 (13C64), iSight not working, not found camera

lastday wrote: ... I don't know where "ScreenRecyclerDriver" come from, ...
It was created when someone installed ScreenRecycler on your system.
ScreenRecycler is a third-party add-on. ScreenRecycler  system requirements show the OS X 10.8 release version is still in beta.  It is possible that you have updated your Mac OS but not yet found a compatible version of ScreenRecycler.
ScreenRecycler is also mentioned in multiple other Apple Discussions problem topics including these:
Loose all logins with ScreenRecyclerDriver: Apple Support Communities
Safari won't open - crashes immediately: Apple Support Communities
Kernal Panic after mountain lion install: Apple Support Communities
Message was edited by: EZ Jim
Mac OSX 10.9

Similar Messages

  • My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

    My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

    Hello Sarahd200037,
    Thanks for using Apple Support Communities.
    To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
    iPhone: Microphone issues
    Take care,
    Alex H.

  • Video not working in Nokia Camera (Lumia 920, Lumi...

    Hi,
    I've just noticed that the video function of Nokia Camera is not working.
    The camera function *is* working.
    Video *does* work using the standard Camera app. (so the camera _can_ take video!)
    I've reset the camera, restarted a few times, still no joy.
    this is for v4.5.1.7 on a Lumia 920 running Lumia Black software.
    Ian

    Try uninstalling and reinstalling the Nokia camera app.

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

    I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!  I NEED HELP OR MY MONEY BACK NOW!

    There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
    If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
    tt2

  • After the updating firefox 5.0 the internet download manager not working (not compatible) can you explan why?

    After the updating fire fox 5.0 the internet download manager not working (not compatible) can you explain why?

    Add-on developers need to keep up with new versions of Firefox as they are released and update their product. Have you checked with IDM to see if they have an update for you to install? Or ask them when they are going to have an update ready for 5.0.
    Another thing you could do is to install FlashGot. <br />
    https://addons.mozilla.org/en-US/firefox/addon/flashgot/ <br />
    http://flashgot.net/ <br />
    The developer of Flashgot, Giorgio Maone, keeps his extensions compatible with versions of Firefox that are still in development - future release versions.

  • I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

    Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

    To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
    How to back up your data and set up as a new device
    If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
    iPhone - Contact Support - Apple Support

  • Z3 Compact scenes not working in manual camera mode

    Hi. That's my problem: when I use manual camera, the scn button is grey and not working, so the HDR. They worked when I bought the phone, at Christmas... No mod root etc. Please help me!
    Solved!
    Go to Solution.

    http://support.sonymobile.com/global-en/xperiaz3compact/userguide/Using-still-camera-settings/
     It has to be set on Manual mode at 8mp 
    HDR
    Use the HDR (High Dynamic Range) setting to take a photo against strong back light or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
    This setting is only available in Manual capturing mode.
    ISO
    You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
    Auto
    Sets the ISO sensitivity automatically.
    50
    Sets the ISO sensitivity to 50.
    100
    Sets the ISO sensitivity to 100.
    200
    Sets the ISO sensitivity to 200.
    400
    Sets the ISO sensitivity to 400.
    800
    Sets the ISO sensitivity to 800.
    1600
    Sets the ISO sensitivity to 1600.
    3200
    Sets the ISO sensitivity to 3200.
    This setting is only available in Manual capturing mode.
    Metering
    This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
    Centre
    Measures the centre of the image, and determines the exposure based on the brightness of the subject there.
    Spot
    Adjusts the exposure in a very small part of the image that you want to capture.
    Face
    Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
    Multi
    Divides the image into multiple regions, and measures each region to determine a well-balanced exposure.
    This setting is only available in Manual capturing mode.
    Image stabiliser
    When taking a photo, it can be difficult to hold the device steady. The stabiliser helps you by compensating for small movements of the hand.
    This setting is only available in Manual capturing mode.
    Preview
    You can choose to preview photos or videos just after you shoot them.
    Unlimited
    The preview of the photo or video appears after you shoot it.
    5 seconds
    The preview of the photo or video apears for 5 seconds after you shoot it.
    3 seconds
    The preview of the photo or video appears for 3 seconds after you shoot it.
    Edit
    The photo or video opens for editing after you shoot it.
    Off
    The photo or video is saved after you shoot it, and no preview appears.
    Face registrationYou can register faces with the Camera application so that the viewfinder automatically focuses on these faces when they appear in the viewfinder.
    Flash
    Use the flash to take photos when lighting conditions are poor or when there is a backlight. The following options are available when you tap the flash icon in the camera screen:
    Auto
    The camera automatically determines if the lighting conditions require the use of a flash.
    Fill flash
    Use this setting when the background is brighter than the subject. This removes unwanted dark shadows.
    Red-eye reduction
    Reduces the red colour of eyes when taking a photo.
    Off
    The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos.
    Torch
    A torch or camera light is turned on when you take photos.
    Scene selection
    Use the Scene selection feature to quickly set up the camera for common situations using pre-programmed scenes. The camera determines a number of settings for you to fit the selected scene, ensuring the best possible photo.
    Off
    The Scene selection feature is off and you can take photos manually.
    Soft Skin
    Take photos of faces using an enhanced beauty effect.
    Soft snap
    Use for shooting photos against a soft background.
    Anti motion blur
    Use for minimising camera shake when shooting a slightly dark scene.
    Landscape
    Use for landscape photos. The camera focuses on distant objects.
    Backlight correction HDR
    Use to improve details in high contrast shots. The built-in backlight correction analyses the image and automatically adjusts it to give you a perfectly lit shot.
    Night portrait
    Use for portrait photos taken at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
    Night scene
    Use when taking photos at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
    Hand-held twilight
    Use for taking hand-held low-light photos with reduced noise and blur.
    High sensitivity
    Use for taking photos without a flash under low light conditions. Reduces blur.
    Gourmet
    Use for shooting food arrangements in bright colour.
    Pet
    Use for taking photos of your pet. Reduces blur and red eyes.
    Beach
    Use for taking photos of seaside or lakeside scenes.
    Snow
    Use in bright environments to avoid overexposed photos.
    Party
    Use for indoor photos in poorly lit environments. This scene picks up indoor background lighting or candlelight. Due to long exposure time, the camera must be held still or placed on a stable surface.
    Sports
    Use for photos of fast-moving objects. Short exposure time minimises motion blurring.
    Document
    Use for photos of text or drawings. Gives the photo increased, sharper contrast.
    Fireworks
    Use for taking photos of fireworks in all their splendour.
    This setting is only available in Manual capturing mode.
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Ipad 3 camera shuttle is not working, ipad 3 camera shuttle is not working

    My ipad 3 camera is not working; the shuttle doesn't open - any ideas on how to resolve this problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Camera connection not working with my camera

    Camera connect not working with my Sony boggie camera

    The Bloggie will not work because it draws too much power from the USB port on the iPad.  The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory.  Works fine with my 3D Bloggie.

  • Tun miniport adapters are not working and the camera card reader is not working on a T61P.

    The Microsoft tun miniport adapters #4,2, and 3 are not working.  They display code 10 error message. Also the USB  mass storage device (camera card reader) is not working. 
    I have tried to uninstall and update the drivers to no avail.  I have used ThinkVantage Tool Box.  It only lets me know that they are not working.  It does say to reinstall them.  I have tried.  All effort has failed.
    All was find until I ran several updates via ThinkVantage.
    All suggestions would be appreciated.
    Thank you,
    Tom

    You will not lose data if you back up
    Worth doing the basic troubleshooting
    Reset
    Restore  best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
    Visit Apple store since if it isn't software probably iPhone is on it's way out

  • Tecra Z50-A-181- built in microphone not working/not found

    Hi there!
    I have recently purchased Toshiba Tecra Z50-A-181 laptop that came with Windows 7 64 bit (have 8.1, too but never installed it).
    Anyways, once I started using it, I have discovered that the built in microphone is not working or not recognized at all.
    So, what happens is that, once I plug in my headphones into the combined audio/mic jack, whoever I am talking to (on skype, let's say) stops hearing me (and my camera is turned on).
    I have tried several things mentioned in other topics, however, the problem does not go off. Moreover, there is no driver for the camera or the built in microphone, or whatever.
    In the device manager there is no additional device, not recognized and in the sound/recording options, no other microphone to use is shown.
    I will appreciate it if anybody can help.
    Thank you in advance!

    Hi, Liam.
    I have solved the issue.
    Turned out,the combo audio jack has its minuses.
    For the ones who might experience my issue, here is what I've discovered:
    The new laptop's combined audio with a microphone jack can be used as such only with a headset with a microphone or a handsfree (which also has a microphone, as we all know) due to the fact they have 3.5 mm 4 pole plug.
    If you plug in a normal headphones (ones without a microphone), your internal microphone is listening to the plug...but since there is no microphone on it, you cannot skype properly or use your internal microphone.
    So, you have 2 options:
    1. To use your handsfree earplugs or a headset with a microphone
    2. To buy an audio splitter that will divide the combo jack into 2 separate ones - for a mic and headphones and then be able to use your standard headphones and internal microphone together, when needed.
    I hope I will be helpful to someone else like me, who is also wondering why Toshiba made such a combo jack...actually, turns out it was simply to ease up the common user...obviously, not me
    If anybody has anything else to add, please do so.
    If not, thank you either way!

  • The back camera is not working but front camera is

    hi
    my back camera is not working anywhere, not on the camera app nor on any other application.
    the front camera is working still
    since that time, the light is not working neither.
    my iOs is already updated
    what should i do?
    THank you

    Hi Moudira.me,
    I understand that you are experiencing an issue with your back camera and LED light on your iPhone. Here is an article for you that will help you address this issue:
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT203040
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • New Cruzer Glide 128 Gb. Not Working/ Not Installing

    I just bought a new Cruzer Glide 128 Gb flash drive, but it's not working in my laptop. It says that it's compatible with Windows Vista, 7, 8 and Mac, my laptop is running Windows Vista Home Edition. Whenever I connect it to any on my usb ports, it make a sound that it's connected and a window pops up say that new Hardware has been found and needs to be installed. I allow it to be installed and wait. After waiting 5 minutes or more, it says that it can't install drivers and to see the Manufactors support page.  I have a Cruzer Glide 32Gb that works in all my usb ports,  so I'm wondering what's going on with 128Gb?

     it recognized the flashdrive in my car and on the computer at my work(Windows 7).
    So, the problem isn't the flash drive, it's your pc.
    my laptop and it does support exFAT.
    The only possibilities I can think of at this point are: 1. your pc's security system is preventing access to the flashdrive.  If the flashdrive has SecureAccess on it maybe your system is preventing access to it. 2. There's something wrong with your USB port.  Maybe it isn't getting enough power, possible if you have a lot of other USB devices, or the port's contacts are a bit oxidized.
    For nbr 1 check your system's firewall and AV logs to see if they show anything.  For nbr 2 try some emery paper on the port's contacts.  VERY lightly.
    Let us know what you find.

  • Mouse Not Working / Not Turned On

    Hello,
    This week I decided to up my Linux experience. I was using Ubuntu Linux before, and I decided to step-up to something a little less... handed-to-you. Enter Arch Linux, and enter problems! I've been in the IRC all day trying to get X running (apprently, I decided to install Arch Linux on the wrong day, as the new X7 package just entered the Arch Repo). Well, I got it running, and I can log into GNOME...
    ...but from there, I'm stuck.
    My mouse (A Logitech MX510) not only does not work in Gnome... it doesn't work anywhere in Arch! The laser does not turn on when I select Arch VIA GRUB... once selected, the thing turns off and stays off.
    I was suggested to use gpm; however, that did not work, and would throw up lines of error whenever I rebooted. Then, I read to install xf86-input-mouse... but I already have that!
    What am I to do! It was suggested that is was not a problem in X... to veer away from the X 7.0 malarkey that's ensueing in the forums and IRC room.
    Thanks for any help. Other than not being able to do anything, Arch Linux is great! Damn fast.

    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/unimaps
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE=
    HARDWARECLOCK="localtime"
    TIMEZONE="America/Los_Angeles"
    KEYMAP=us
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by hwdetect
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    #   - prefix a module with a ! to disable it
    MODULES=(evdev usb_storage usbhid ohci_hcd ehci_hcd uhci_hcd)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="backroom"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng !hotplug !pcmcia network netfs crond dbus hal httpd openntpd gdm alsa)
    # End of file

Maybe you are looking for