ISight only works when it's the ONLY firewire device?
I have connected the iSight to both the firewire 400 and firewire 800 ports. It only works when it is the only device connected to the port.
If I connect it to a hard drive, it works if and only if the hard drive is off. When I turn the drive on, the iSight ceases functioning. When I connect it to a hub, it works if and only if there are no other devices connected to the hub that are on.
Is there a trick to getting the iSight working with other devices?
Some devices are tricky for me, too. Possible hardware or software conflicts
Similar Messages
-
My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?
My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.
Welcome to Apple Discussions!
It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues. -
My space bar only works when i press the alt key, help!
My space bar only works when i press the alt key, help!
I researched on here and my space bar was set for the speech function, now resolved...this site obviously works, nice one!
-
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
My display only works when held in the landscape position outdoors?
My ipad works fine indoors, but when I take it outdoors to read, it only works in the landscape position. In the portrait position, nothing shows up at all.
Any suggestions?Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem. -
This is my second iPad 2 and I have only turned it on and the sound does not work???
thanks i did reset it but its still the same
i phoned apple store n they said it was something they werent sure about
so i have to make a 50 mile trip to get it seen to n yet it should have been
a brand new one! i think it must have been a referb that wasnt fixed
thanks for the reply -
Siri only works when I use the "raise to speak"-feature
Siri works as in the icon shows up when I press the home button and it starts "listening". But the microphone does not show any movement. So Siri "doesn't hear me". Funny though: When I just pick up the phone and talk, she understands me perfectly.
- Siri via home button does NOT pick up my voice
- Siri with "raise to speak" enabled works
- Microphone works
- no network problems (my iPad-Siri works fine)
Kinda annoying. Things I've tried:
- reboot
- turn off/on
- diable bluetooth
Hardware:
- iPhone 5, 64 GB, white (as if it matters *g*).
I am kind of clueless. Any help? Anyone? Thanks a lot.Replying to myself. Believe it or not. After I finished this post, I tried just one more time. Guess what? It works. No changes. Siri got scared of the community, I guess. Very weird.
-
My iPad 2 was left on overnight, not plugged in with the battery at 95% last I checked. This morning it was off and I was unable to turn it on. I plugged it into the charger and it seemed to start up, but the date and time had been reset to December 31st 1969 at 4pm!!! Then, I tried to reset the date and time but it would automatically keep going back to that date. When I went to unplug it, so I could sync it with iTunes, it turned off immediately! It only works when plugged into the charger and even then it turned itself off after about 2 minutes. While unplugged, I tried a hard reset (holding the home and sleep/wake button down at same time for 15 seconds, but it doesn't do anything at all. I did notice that it was pretty hot yesterday, but didn't have any problems running it at all. Any suggestions, or is this clearly a hardware problem? Thanks in advance.
When it was plugged in, it was at 95% so that's not the issue. THe battery appears charged, but the device simply doesn't want to run on it. The weird date reset makes me think it could potentially be a software issue, but I'm worried it is essentially a hardware/battery problem.
-
Built-in microphone only works when phone is connected to iPod nano cable
Hi, I got an iPhone yesterday but the microphone doesn't work properly. I have figured out that the built-in microphone will only work when I connect the dock cable from a second generation iPod nano. The cable that comes with the iPhone does not work. The supplied handsfree earbuds work correctly at all times.
The strangest part of the problem is that the iPod dock cable doesn't have to be connected to my computer!
I'll state the problem again. Let's say I make a phone call. The person on the other end cannot hear anything I say, but I can hear them. Then I plug in the dock cable from a second generation iPod nano, and the other person can then hear me. Unplug the cable and they can not hear me.
I have tried restoring the iPhone three times, turned it on and off, and inserted and removed the headphone plug many times. These actions do nothing. *The only way I can talk on my phone is if I insert the dock connector from my old iPod!*Take it back.....
-
Left USB port only works when entering BIOS
Hi all -- I have a Toshiba Satellite C855D-S5106, the LEFT USB port only works when I enter the BIOS at boot-time. If I disconnect the drive, i.e. eject it and then remove it, the port stops working. The other two ports at the right work fine. I've tested this with known good flash drives and Kensington USB trackball that work fine on four other computers, and the other two USB ports. I'm thinking its software/BIOS because hardware would fail intermittently, I could not get the port to work if there was a failing connection. As stated, this work-around succeeds EVERY time. I have not upgraded the bios. Has anyone had this problem?
If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html -
my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process: Disk Utility [371]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2013-11-05 03:29:41.247 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 9522 sec
Crashes Since Last Report: 29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report: 25
Anonymous UUID: F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x0000000100c62fbc _read_images + 312
1 libobjc.A.dylib 0x0000000100c79721 map_images_nolock + 1266
2 libobjc.A.dylib 0x0000000100c62761 map_images + 115
3 dyld 0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4 dyld 0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5 dyld 0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6 dyld 0x00007fff5fc08f7c dlopen + 490
7 libSystem.B.dylib 0x0000000100a14e40 dlopen + 61
8 com.apple.CoreFoundation 0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9 com.apple.CoreFoundation 0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation 0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation 0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation 0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport 0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport 0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility 0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility 0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit 0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit 0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit 0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit 0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit 0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit 0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit 0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit 0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit 0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation 0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation 0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE 0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE 0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE 0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox 0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit 0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit 0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit 0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit 0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility 0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility 0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x0000000100a27c0a kevent + 10
1 libSystem.B.dylib 0x0000000100a29add _dispatch_mgr_invoke + 154
2 libSystem.B.dylib 0x0000000100a297b4 _dispatch_queue_invoke + 185
3 libSystem.B.dylib 0x0000000100a292de _dispatch_worker_thread2 + 252
4 libSystem.B.dylib 0x0000000100a28c08 _pthread_wqthread + 353
5 libSystem.B.dylib 0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?
Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates.
Maybe you are looking for
-
Help! I got rid of my old PC and the hard drive was destroyed. I forgot to deauthorize it in Itunes and now I can't access a lot of the songs in my library because it says too many computers have been authorized to play the music. IS there anywy I
-
Migration Assistant Question (From 10.4.11 to 10.5.5)
I have a question regarding Migration Assistant in regards to upgrading from Tiger to Leopard. I do backups of my entire internal HDD onto an external firewire drive using SuperDuper. I do not make a bootable drive, I backup to a disk image that can
-
After upgrading to Acrobat Reader DC, the Fill & Sign toolbar is empty.
I have a PDF I need to initial daily, and I've been having trouble since upgrading to Adobe DC. When I open the Fill & Sign toolbar, there are no options on the bar. If someone signs and saves the PDF, I can then see the toolbar options when I reopen
-
Hi, I have this table REQ_DETAILS detail_id value_id parent 282 125 281 283 126 281 284 119 (null) 285 127 284 286 128 284 301 120 (null) 341 1169 321 303 130 301 322 1168 321 33
-
I'm sort of new to Adobe Javascript, but why does this resolve to the right node and give the correct value, [FormCalc] var x = xfa.sourceSet.TestDataConnection1.#command.query.select.value; xfa.host.messageBox(x); but not this: [Javascript] var x =