Isight stops responding and goes unrecognised

On my intel mac my isight camera sometimes just stops responding and fails to be recognised as a valid input source....typically this happens after a week or so of being plugged in, but it is quite random.
BUT, both my father and aunt have the same problem with different cameras on different computers.
In all cases rebooting the computer does not clear the problem. The only solution is to unplug and re-plug the camera.
I never have to unplug or re-plug my firewire disk drives so what is the problem here?

Hello Roger Price,
Unless someone comes in w/a specific Intel/Mac suggestion, I'm going to repeat myself and suggest that anyone with an external FW HD and iSight, consider not using them both at the same time.
Take a look at the other discussions in this group and be sure and see EZ Jim's Blog pages.
For whatever reason iSight does not seem play well with other FW devices.
I never have my iSight plugged in, much less in use, when backing up or using an external HD. Just too much chance that a problem will occur and I'll lose data. And I've found that living w/the problem isn't all that hard. When I'm expecting our weekend family conferance, I pull the HD and plug in the iSight. Seriously, less than 5 seconds. Not ideal but it works for me.
Respectfully,
Bill Gallagher

Similar Messages

"Display ATI Radeon Family driver stopped responding and has recovered"

For the past few days my laptop Model HP G61-409CA has been displaying broken black and white horizontal lines and black, white, and coloured random squares on my screen. When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. Unfortunetly when i click on the triangle nothing opens up.
Ive tried to download Catalyst Control Centre because when I researched many people spoke about not being able to find their control centre and that it had something to do with the displaying error on the screen. I cant seem to find the folder or the program on my computer, but when i tried to install something similar from http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages less than half way through the computer displayed a Blue screen and had to shut down. Also when i recovered my laptop the problem did not go away.
My product number : WA964UA#ABC
OS: Windows 7 for x64 based systems
Please let me know what needs to be done ive tried updating all my drivers aswell!

Hi Quesspee,
Thank you for your query, I am happy to assist you!
I grasp that a few days ago your display started showing broken black and white horizontal lines and black, white, and coloured random squares on your screen . When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. When you clicked on the triangle, nothing happened.
You tried installing the Catalyst Control Center and approximately 1/2 through, you received a blue screen and your system shut down.
You tried doing a recovery but the issue remained.
I suggest you test for hardware failures. Testing for Hardware Failures (Windows 7)
If this did not help to locate the issue, I suggest contacting HP support for further assistance. They have the ability to remotely log onto your system, to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows 8.1 Nvidia Windows Kernel Mode Driver Driver stopped responding and recovered?

I have the newst version of the 15" MBP Retina with the Haswell chip and Nvidia GT 750m. The problem I started having about 1 week ago is intermittent it seems, but involves the graphics driver when I'm in windows.
The screen goes flashes to black for about 5 seconds then recovers and the display comes back up. It just continues to do this every 10-15 seconds and the error messages displayed is "Display driver stopped responding and has recovered" below that it says Display driver Nvidia Windows Kernel Mode Driver Vers.####### stopped responding and has successfully recoverd.
What's crazy is the problem is not limited to any particular version of the driver! I used system restore and went back a few weeks just to make sure, thinking it was just a conflict with a new update somewhere. I have tried to install old versions of the 64-bit Geforce driver and it is irrelevant, the problem keeps cropping back up. I dont' know what to do, and can't even function in the Windows side hardly at all for very long.
Please help
Thanks
Robert

Hi Robert,
I dont know if this will help you, but yesterday when I logged into Win 8.1 on the same rMBP as you I got an update notice for a new driver for the NVIDIA graphics card.
This is the driver that I got the notice for. http://www.nvidia.com/download/driverResults.aspx/73780/en-us
You may want to download this and try installing it.
Good Luck

Satellite A500 - NVIDIA driver stopped responding and has recovered

Hello.
I have a TOSHIBA Satellite A500-1GP. I bought this laptop 1 mounth ago, and from 2 weeks before I start to have problem with it. The screen it goes black, like 2-3 seconds, after is appear this message " Nvidia driver stopped responding and has recovered" Is really start to stressing me. I install the laptop with all his original driver, and his original Windows 7. I didn't make any reinstall, or something else.
The updates ar UP TO DATE, and I have no ideea what he should want from my life. Like this are all the new models ? Start to make problems from the begining ? I'm waiting some answers..
Thanks..

My config:
- Toshiba Satellite A500-1GR
- Process: Intel Core i5
- RAM: 4096 Mo DDR3
- Graphic card: nVidia GeForce GT 330M
I had the same problem the graphic driver installed was the 258.96 Version. I kept it up-to-date using nVidia official web site... Afterwards, I believe I was wrong to do so.
I did as you suggested.
- I went to the [Toshiba Support Center|http://fr.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/]
- I downloaded and installed the 20/08/10 BIOS Update
- I downloaded and installed the 08/06/10 Display Driver
After that, I checked the version of the GeForce GT 330M driver, it's now 188.75.
I have no problem since I did this in the beginning of this afternoon. What a relief !
Thank for your Support!
If I encounter the issue again, I will notify it in this thread, but I hope this issue is solved and that I won't need to!

[W500 and Windows 7] ati display driver stopped responding and has recovered

Hi,
I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
In the details of the driver, the following can be seen:
Driver Date: 28/04/2009
Driver Version: 8.612.0.0
The card is recognized as a 3650.
Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
Thanks in advance,
gill

I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button.
It's really annoying.
It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

Toshiba Satellite P500 "Display Driver stopped responding and has recovered."

I have a Toshiba Satellite P500/XEO PSPGSA - 1XE08L Windows 7 Home Premium (64bit) system. I’ve received the following random message Since I bought the computer back in 2011--- “Display Driver stopped responding and has recovered.” Since I have bought the computer I have returned it to Harvey Norman where I purchased it from for them to fix the issue. They have reformatted and whiped the computer a couple times aswell as going to the toshiba website and installing the latest drivers. I also have done the same steps as Harvey Norman.
The computer has been sent back to Toshiba also, It was overheating so Toshiba has put a new CPU into the computer to fix that issue and also the hard drive had a fault sector so Toshiba installed a new hard drive. When Toshiba had the laptop they tried to fix this issue with no result.
This issue is more annoying then anything because it happens often (a few times a day) and some of the time when the driver fails and the screen stays black, the only way you can fix this is a hard shut down by holding the off button.
I have looked at all the threads and have seen a lot of people having this problem. I have tried all the ideas and people's ways to fix this issue but nothing has worked.
This problem needs to be solved and I don't want to hear that I need to reformat my computer or restore it to factory settings like tech support have told me to do because both myself and Harvey Norman has done this and IT HASN'T Fixed the issue. This issue can't be good for the computer..
I am very dissapointed, after nearly 2 years of having this laptop the problem hasn't been fixed and Toshiba has no idea how to fix this issue. This laptop cost me over 2500 dollars and I have had more problems then I would have had with a 500 dollar computer.

No reply from Toshiba yet? Great customer service.
Anyways this is a snapshot of my screen going black and then coming back with a message popping up stating that the Display Driver has stopped responding and has recovered.
As you can see the window that I am in turns fully black after the driver recovers, I have to close the window and re open it. This happens many times a day.
I also am getting the display Driver crashing and the whole screen turns black and stays black, no matter what you do the screen stays black. I hit Cntrl + Alt + Del and nothing works making me shut it down by holding the on/off key
I do a lot of business on this computer and use it for all purposes. Due to this issue, every time the screen goes black and I have to hard restart the computer I lose all my work. Due to not knowing when this will happen I am having to lose a lot of work and start all over again.
This is ridiculous and Needs to be fixed. I am a Toshiba Customer and I have spent my money for the best of your products and I am very disappointed with the outcome. There has been no help, I have had nothing but issues and the customer service and support for your company is atrocious.
In future I will no longer be buying Toshiba and I know a lot of other people who have seen this issue and had the same problems with Toshiba support that they won't be using Toshiba either.

Display driver nvlddmkm stopped responding and has successfully recovered

Display driver nvlddmkm stopped responding and has successfully recovered
I was getting this error from my new computer i had for 6 weeks. This is the second one laptop I bought that had that error from BEST BUY in FRESNO CALIFORNIA. After an amazing amount of research and looking into my machine they folks at the CLOVIS department decided it was hardware and not software. ...Now..
I went to the store in FRESNO and the nice gyt behind the counter could not help me because the policy on returns was 2 weeks. I stated it was hardware and not software. I asked for the manager and got this Chinese looking child about 18 years old come to me and said abruptly not our problem, took his bag, flung it over his shoulder and went home. I stood there wondering what am I going to do with this dead machine.
FRESNO GEEK SQUAD couldnt figure out what was wrong with it, they couldnt even hook it up to the internet so I could show them. Very annoyed I called my other branch in CLOVIS, there I was treated very nicely, they looked at it for about 2 hours trying to figure out what is wrong. they came to the conclusion that it was probably VISTA. They gave me credit against another machine.
I actually put another 500 bucks to get a better an another model machine.
I have acually spent well over 5000 dollars with Best buy in Fresno and I will not be going back for anything.
If anyone is getting that error then take it back in andd get a new machine.

So, did you send an error report and check the solutions center at the bottom of the taskbar for a sololution?
It says you need to update your driver from NVIDIA directly to overcome this issue.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Display driver nvlddmkm stopped responding and has successfully recovered.

Display driver nvlddmkm stopped responding and has successfully recovered.
If nVidia and Firefox won't play nice I'm going to have to drop Firefox.
I believe the problem actually is with nVidia, because installing GeForce 275.33 Driver and earlier WHQL drivers eliminates the problem.
But changing video cards costs money, whereas changing web browsers is free.
Hence my statement, "If nVidia and Firefox won't play nice I'm going to have to drop Firefox."
It is not fair, but it is reality.
nVidia is ignoring the issue, because it knows we can cheaply bypass their bugs by switching browsers. (With other people they've pointed fingers at power supplies, mother boards, you name it, anything to pass the buck.)
I am not interested in bypasses. I am only interested in actual fixes.
In other words no jumping through hoops with manual procedures, driver sweeper, unplugging to stop windows update, or stupid actions like deleting all my Windows Restore Checkpoints, etc. Except for deleting all my Windows Restore Checkpoints I've done all that.
That nVidia suggest this suggests to me that the bug is actually in their install or uninstall scripts. The problem with their bypass is it introduces race conditions so it does not work on my system or many other nVidia 400 and 500 series graphics cards.
I've tried all the WHQL nVidia drivers since 275.33 and they all have this problem. So does the latest beta (I seldom ever do betas any more, but I made an exception).
Do a vanilla clean install using the standard install script included with the old 275.33 nVidia drivers and the problem does not occur.
If this is not going to be fixed, if we're going to be left with just bypasses, my bypass will be to change web browsers.
+++ So, can Mozilla somehow please light a fire under nVidia's feet? +++
I really do not want to change browsers, but it is the cheapest solution by far.

There are some open bug reports on Nvidia's drivers. We can open a new bug (if you want to go that route, let me know the bug number and I will triage it), but all that Firefox can [usually] do is blacklist the driver so that HWA isn't run on that driver.
Your best bet (for now) is to disable HWA yourself and that should resolve the crashes
http://www.trishtech.com/internet/disable_hardware_acceleration_in_firefox_4.php

Y50-70 Display driver stopped responding and have been recovered

No matter CSGO or DOTA2 or running 3D Mark it will fozen and shows PDC_WATCHDOG_VIOLATION, then restart. Or if i transfer to destop when it forzens, it gonna show Display driver stopped responding and has recovered. My display driver is the newest one and even i reinstall system the same thing happened.

hi johnny93,
Welcome to the Forums.
Can you try these steps:
1. Uninstall both Intel and the Nvidia Display Driver v353.30 from the Control Panel and reboot.
2. Install the following drivers in order and observe (reboot if necessary). You can also get them from the D:\Drivers folder
1st - Intel Video Driver for Windows 8.1 (64-bit)
2nd - Nvidia Video Driver for Windows 8.1 (64-bit)
3. If the problem remains, can you check the status of the system by installing Lenovo Solutions Center or manually run a diagnostic on the GPU and post the results here:
Lenovo Solution Center (LSC)
- Sample image
Individual Diagnostic Tools (see Video Test)
Let me know how it goes.
Regards

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

Windows stops responding and closes when I try to print

I have IE 9 on a vista 64 bit. Recently I had some problems with print jobs staying in the que. I resolved that and reinstalled the printer and drivers. I have a photosmart 5514. Ever since that day I can't print off a webpage. Coupons, bank statements etc. It says windows stopped responding and closes the webpage. I have been unable to fix this. Also since that day my microsoft works wont' work. It says I have corrupted fonts!

It is a wireless connection. What happened first after a year of flawless performance was I was asked to print a statement from my banks website. I tried several times and it kept shutting down with the windows error above. I was unable to print anything from that moment on. I spent half the day finding the problem and discovered my WP network key was changed. I have no idea how trying to print from the banks site did that. I called them to report the situation since it was so strange. Even asked them if they knew what that number even was. I still had issued so I just uninstalled the printer and used my installation disc to set it up again. Now I can print off my documents, PDF or Word but my Works files come up with the message that the font cache is missing or renamed. When I searched that I found it isn't uncommon and that it is usually a corrupted printer driver. I loaded it off my CD from HP. Not sure what to do now other than try to uninstall and reinstall. Just haven't had a time with work to do that yet. Also when I try to print off an email, webpage or even a coupon it does the windows has to shut down message. This will be my last HP printer. I have problems all the time with them and have owned nothing but HP for over 20 years. Four computers and printers in the house right now. I just can't deal with que issues and buying new printers every two years because I have a home office and must have it working.

When I try to view my full att bill firefox stops responding and closes ALL pages. I have to open explorer to view it!

I am trying to view my ATT wireless bill, and when I ask to view the full version it opens another window and says receiving data from ATT. This doesn't ever change and when I hit any key on any other window in firefox then I am told that firefox has stopped responding and must close.

No release of Pages v5 can open AppleWorks, Pages '05, Pages '06, Pages '08, or RTF documents. Sometimes, it cannot open its own documents.
You will need to do one of the following:
Borrow your MacBook Pro back until you can export all your incompatible documents to MS Word (Which Pages v5 can open)
Install your iWork '08 DVD on your new Air, and then immediately apply the following Apple Updaters. Again Export to MS document formats.
Pages v3.0.3
Numbers v1.0.3
Keynote v4.0.4
Purchase iWork '09 DVD, and then immediately update with Apple iWork 9.3 updater.
Open the document(s) that Pages v5 won't permit
Save as Pages '09 v4.3 documents, or export as MS Word
Upload to Zamzar, and convert to MS Word (free for limited volume)
No sensitive documents
Email notification within 3 - 4 minutes with MS Word document download link
After you do either item 2 or 3, run Disk Utility and verify/repair application permissions on your boot drive. Open your converted documents in Pages v5.

My firefox stops responding and fades for about a half min almost every hour, OR MORE often

My firefox stops responding and fades for about a half min almost every hour, OR MORE often.
I am typing a message or information, the screen fades to about half bright. the curser freezes in place and no key responds.
The information bar at the top of the page says "firefox not responding" in about 30 seconds it restores and continues as tho nothing happens.

I might have discovered the solution without starting over with all your places and bookmarks.
Right after i installed 7.0.1 over a week ago,every 10-30 min When i would be watching videos online, it would freeze for 20-30 seconds. Firefox would say ( Not responding) both firefox and the plugin container process would be very large memory files. I tried to go back to Firefox 5.0. No avail it would still freeze.I tried to disable the plugin container . no good. I tried to adjust memory or cache or plugin settings in “about:config”.Nothing fixed it!
I finally discovered why my Firefox 7.01 was periodic hanging fix. It is something to do with some of your personal files. download this this add on and install it
https://addons.mozilla.org/en-US/firefox/addon/places-maintenance/
or you can Google "places maintenance Firefox"
After you install the add on, restart Firefox.go to "tools", then "add ons" and then click “extensions” tab ,then click' options" on the "places maintenance" entry. choose "ALL' or just "expire" and hit "execute", then wait until its done., restart Firefox. should be fine then and all my bookmarks, customizations ,settings, and history stays untouched!
After i did this my Firefox did not freeze once for over 3 days straight. Might not work for everyone. I already read that Mozilla is aware of the problem and are working on a fix it in the full version of 8( the 8 beta did not fix the problem for me) . But they said this is a good temporary fix at least,( might be permanent)
For me at least ,Firefox works fine in 7 now. perfect actually.And many people i saw on similar forums had similar problems.
Enjoy. Hope this helped

Ever since the most recent firefox update, every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it?

Every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it? When I restart firefox, then the download continues and all is well until I try to download something new (which I do quite often).

You may well find this article of interest and help in sorting out your problems: [[Installing a previous version of Firefox]] The article does contain a link for previous versions, but also points out other troubleshooting advice that may be more appropriate in some instances.
Another useful article is [[Basic Troubleshooting]]
I hope you sort out your problems either by downgrading or finding the cause of the problem.

Isight stops responding and goes unrecognised

Similar Messages

Maybe you are looking for