ISight visible in USB, but no iChat, Skype or Photobooth in first user only

I just updated from 10.4.11 to 10.5.1.
I have one issue:
the iSight is visible in the list of USB devices, but not in iChat, Skype or Photobooth in first user;
a second user can use iSight in Skype, but not in iChat or Photobooth.
I suspect a problem with a residue from a former program, extension or preference.
Help welcome.

See if iChat shows video after you start up in "safe mode".
http://docs.info.apple.com/article.html?artnum=107393
After you've logged in, open iChat and select "video" > "preview" from the top menu, close iChat.
Restart in normal mode.
Open iChat, select "video" > "preview" from the top menu.
More info on "safe boot":
http://docs.info.apple.com/article.html?artnum=107392

Similar Messages

  • ISight not working with Webex, GoToMeeting or Lync...BUT works with Skype, Facetime, Photobooth (June 2013 MBA)

    Brand new MacBook Air (June 2013, 8MB RAM, 500GB SSD)
    iSight not working with Cisco Webex, Citrix GoToMeeting or Microsoft Lync (error = webcam not detected); BUT iSight works with Skype, Facetime and Photobooth.
    3 hours of phone support with Webex - no luck.
    Tried SMC and PRAM reset - no luck.
    Tried erasing disk and reinstalling OSX 10.8.4 and apps manually with latest versions - no luck.
    Apple phone support says it's not Apple's problem because Apple apps work.
    Exchanged at Apple Store for another new MacBook Air, again installed apps manually with latest version (not from time machine) - STILL NO LUCK!!!
    Is there an update Apple or Cisco, Citrix and Microsoft need to put out for the new MBAs or do I just have 2 lemons???

    You're welcome.
    1wave wrote: ... an external webcam which might be a cheaper alternative ...
    It will be interesting to see what the vendors say about using a Mac-compatible external webcam.
    If not, some netbook or other Windows® device might offer compatibility at a much lower cost than a compatible Apple notebook.
    We will watch for your update(s).  What the vendors tell you will be very helpful to others who share this or similar issues with their new MBAs.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Phone memory not visible with USB, but visible wit...

    Hi,
    I just installed the latest Ovi Suite 2.1. My phone is the Nokia E72 with the latest firmware.
    When connecting the phone via USB, i get an S60 handset icon under My Computer, if i click it i see the memory card available as drive, but no trace of the internal phone memory.
    But if i connect the phone via Bluetooth, an icon called E72-1 appears that contain both memory card and phone memory.
    How can i browse the internal phone memory with usb? It seems broken in latest version.
    All functions of Ovi Suite work fine. Please help.

    Hi,
    When connecting USB cable with your device please ensure you are selecting PC Suite mode. You can change these settings from the device side: Control Panel -> Connections -> USB.
    In case your USB driver installation has somehow failed (happens sometimes due to Win7 windows driver update feature) you should go to Windows Device Manager through Control Panel and check that under Portable Devices you can find at least two entries referring to your device (your device with "friendly" name and S60 Handset). If there is only one then please uninstall it with right click and re-plug the USB cable. The driver will be re-installed.
    Also check that under Wireless Communication Devices (in Windows Device Manager) all entries are installed properly (I have 6 of those for E72).
    After all these checking and unplugins/plugins and selecting correct USB mode you should have also your device icon in your My Computer (in addition to S60 handset icon). By clicking that you have an access to both device memory and memory card.

  • IChat, Skype & Yahoo webcam not working?

    Hello,
    A few days ago I updated my Macbook Pro as it had some small updates to run. Before the updates, my built in webcam and external Microsoft LifeCam both worked with all three applications (iChat, Skype & Yahoo). After the updates, only my built-in webcam would work. Later that day, after me playing around (with no experience) I lost all webcams, built-in and external to all three applications.
    Today, after turning my Macbook Pro on my iChat works with both webcam (don't ask how I got this to happen).
    But...
    Yahoo says "video source - none" to both webcams
    and skype says "no video camera connected"
    Can anyone please provide assistance?
    Thanks
    Ryan

    Hi,
    Welcome to the    Discussions
    First of all go to the Applications/Utilities folder.
    Open Disk Utility.
    Select the Hard Drive in the list on th left
    Select the First Aid tab
    Hit the Repair Permission Button near the bottom
    Ignore the messages about ACLs
    Then restart the computer and do a PRAM reset
    Shut down the computer.
    Restart it holding down APPLE(or ⌘ )ALT(⌥)+PR Keys until you have heard three Start Up Bongs.
    Try these two first and come back to us.
    9:17 PM Thursday; April 29, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • My MacBook Air 2nd h 2011 running Mac OS X ver 10.7.5, camera disappeared. FaceTime. Photo Booth, iChat, Skype can't find it. It isnt in System Report, in USB High-Speed tree. I've browsed discussions found no solution.Pls help me

    My MacBook Air 2nd h 2011 running Mac OS X ver 10.7.5, camera disappeared. FaceTime. Photo Booth, iChat, Skype can't find it. It isnt in System Report, in USB High-Speed tree. I've browsed discussions found no solution.Pls help me

    JLeme wrote: ... camera ... isnt in System Report, in USB High-Speed tree...
    If you have tried every relevant suggestion from How to Troubleshoot iSight but your camera is still not recognized anywhere in your System Profiler's USB Device Tree, you likely have a hardware problem.
    Properly applying the Combo version of the latest update for your Mac OS can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.  For hardware help, contact Apple or an Apple-Authorized Service Provider for service on your MacBook Air.

  • NEED HELP!! ICHAT & SKYPE video screwed. QTPRO&ImovieHD video fine!

    Unable to get help from apple support. Can't figure out how to fix video problem with isight, ichat & skype. the image is broken up into vertical lines like looking through glass. This is a recent problem. However, ichat and skype work fine with a camcorder. How can this be?
    Image is perfect on qtpro & Imovie HD as well as Quicktime Broadcaster.
    Support wanted me to reinstall 10.3.5 over 10.3.9 and to preserve settings. Recently installed isight update 1.0.3 and a few programs on apple website.

    Hello pickmynose
    Whenever a user is having as much difficulty as you are, I suggest you keep your important files backed up regularly. If you have not backed up recently, now would be a good time. Then, on to your issue.
    Unable to get help from apple support.
    Support wanted me to reinstall 10.3.5 ...
    Sounds like they are trying to help. Why have you not tried their suggestion?
    ... image is broken up into vertical lines like looking through glass ...
    ... ichat and skype work fine with a camcorder ... How can this be?
    ... Image is perfect on qtpro & Imovie HD ... Quicktime Broadcaster...
    The fact that your iSight "image is broken up into vertical lines like looking through glass" while "ichat and skype work fine with a camcorder" coupled with your assertion that "Image is perfect on qtpro & Imovie HD as well as Quicktime Broadcaster" leads me to think (as apparently do "apple support") that you have a software problem.
    If you do not want to try the suggestion offered by "apple support", consider
    applying the Mac OS X Combined Update 10.3.9. Repair permissions immediately before and after updating.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    Although you report that "Image is perfect on qtpro ...", the fact that you are post this problem
    http://discussions.apple.com/message.jspa?messageID=4153016#4153016
    about using QT Pro, have added "a few programs on apple website," and list several accessory devices in your system information leads me to wonder if you might have a Possible hardware or software conflict. Unplug, uninstall, and disconnect everything possible while you check for potential conflicts.
    I see from another of your posts that you were using FileVault. FileVault Can Affect Performance on any application that writes to disk. Turn off FileVault, at least while you are troubleshooting and until you get things working properly. I only turn FileVault on while my laptop Mac is in transit or not in my possession. I turn FileVault back off while I use it. This takes some time, but saves a lot of trouble.
    Seemingly unrelated problems in multiple applications or operations can sometimes be a symptom of a startup disk that needs more free space or some other Mac OS X Maintenance. Perform maintenance now unless you know your maintenance is up to date.
    Finally, try any relevant suggestions you have not already tried from Apple's How to Troubleshoot iSight kbase article. Sometimes strange problems occur in only one user account. Test to see whether the problem is resolved if you start a new user account.
    If you still have the problem, unless you get better suggestions here, I think you should contact your Apple-Authorized Service Provider for professional service.
    Jim
      Mac OS X (10.4.9)    G5 DP 1.8  External iSight

  • Isight firewire cam not working in iChat on Leopard.

    After installing Leopard on my Powerbook G4 867 dvi, my Isight Firewire Cam is not working anymore
    in Ichat on Leopard.
    Any solutions, it worked fine under Tiger.
    Isight firewire cam works fine wirh Skype, Amsn , Photobooth and Quicktime.

    Alright. I've done quite a bit of testing now.
    My system is (as stated below,) a 12" PowerBook G4, 867 MHz, 640 MB RAM, 40 GB hard drive, Combo drive, AirPort Extreme. It was purchased in Summer 2003, and while the OS has been reloaded, it hasn't been for a long time, and at present, the OS was an install of Jaguar that was upgraded to Panther to Tigard, finally to Leopard.
    I was experiencing the issue mentioned. In my case, I use a FireWire miniDV camcorder for video in iChat. It has worked fine in the iChat AV beta in Jaguar, and iChat AV in Panther and Tiger.
    Upon upgrading to Leopard, I get the "Slow Network" explanation for why I cannot use video (or hosting multiperson audio, or screen sharing.)
    My research shows the following:
    This occurs both on the upgraded install, and a fresh install. (To an external hard drive.)
    Using Ecamm's PowerBoost allows me to use every option that isn't barred outright by lack of hardware (video effects.) This includes both "Slow Network" issues and "Insufficient CPU" issues (essentially just multiperson video.)
    So my guess is that the "Slow Network" is indeed a "bug", and will be fixed by an update from Apple.

  • HT2090 iSight Not Working? W/Skype and PhotoBooth

    Hello All,
    My iSight camera isn't working with Skype, or PhotoBooth. I am running  Snow Leopard 10.6.8. The only time I can get the camera to work is after resetting the SMC. The camera will work for a skype session, but then the next time I go to skype, it does not work, and I have to reset the SMC all over again to make it work.
    Does anyone have any fixes?
    Thanks,
    -G

    (0)  Your problem might be a bad Skype install.
    Reinstall the latest Skype version that is compatible with your Mac OS.
    If the problem persists, consider the following:
    (1) When you tried Apple's suggestions, IF, in EVERY user account you tested, the Apple apps also exhibited the problem (i.e., start an Apple app session, quit that app, and try an Apple app again BEFORE you launch Skype,) your Mac OS software may be damaged.
    Properly applying the latest COMBO update for your Mac OS can sometimes correct software problems.  Here is how I do it:
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update, for your Mac OS,
       the current one is at: http://support.apple.com/kb/DL1400
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    If the COMBO update did not resolve your problem, reinstall Mac OS X.  Then apply the Combo Update again before testing your iSight's operation.
    If your problem continues after proper reinstall, make a current backup, and then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    (2) When you tried Apple's suggestions, IF, in EVERY user account you tested, your problem ONLY occurs after you have launched Skype, Skype's comprehensive support system should best be able to help you use their product with your system.
    Start here:  https://support.skype.com/
    You can also search or post for help with your problem in Skype's dedicated Skype Discussions for Mac.  The Skype users who post there may have already solved the same problem.
    If no other Skype help works, you can sign in and ask for email help directly from Skype's Technical Support people.
    Mac OSX 10.8.2

  • Best iChat/Skype/iPhone compatible gear?

    I'm trying to figure out what would be the best set of toys to use with with iChat that would be compatible with Skype as well. I found this site: http://www.mac-compatible-web-cam.com/ and was looking at Logitech QuickCam Pro 9000. However I make a lot of overseas skype-to-phone calls where camera is unnecessary and I'm not that convinced that the mic on it would be as effective as something closer (or a phone). Wouldn't it make sense in cases like that to get an USB (?) headset (until now i've been using macMate phone attachment) or better yet: a bluetooth headset that would work with both iChat, Skype AND the iPhone?

    "imac G4"
    This area is for iMac G5 issues.
    Try over in the iMac (Flat Panel)Forums.

  • IChat/Skype

    Can I use a USB web cam using usb1 for iChat/Skype?
    Terry.

    Yes,
    On the whole it will need Mac Drivers AND iChatUSBCam to work
    http://www.ecamm.com/mac/ichatusbcam/
    10:36 PM Monday; October 29, 2007

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • Why does my artwork disappear from my ipod?   It's all visible in itunes, but on the ipod nano it disappears.

    Why does my artwork keep disappearing from my ipod?   It's all visible in itunes, but on the ipod nano it when I copy over new albums with artwork, the artwork on the albums already on the ipod lose theirs, although they retain the artwork if viewed through itunes.
    In case it matters, I don't "sync" my "library".  I have a I have a PC and copy over directories containing albums of MP3 files by dragging them onto the ipod with itunes.  I also tried pulling over only the files and not the directories.

    OK, so I decided that maybe if I "sync" my iPod instead of just copying stuff to it at will, that maybe it would fix the problem.  I did a "restore", wiping out the contents.  I set up a "playlist", and put everything that I wanted on the iPod into the "playlist".   Then I "synced" the "playlist" onto the iPod.  Every song and album now had the proper album art.  I could live with this.   Then I added another album to the "playlist", and "synced".  The new album was now on the iPod with the correct artwork.  The albums that were already on the iPod now either had their appropriate artwork, no artwork, or the artwork from the other albums that were already on the iPod, with no rhyme or reason as to which was which.  AARGH.   I wiped it out and re-added the now-explanded "playlist" and "synced" again, and every album had the right cover.   I guess the only thing to do is completely replace the contents of the iPod any time I want to add or change anything, or forget about artwork.

  • I have iTunes 10.6.3.25 and I can't find my audiobooks that I downloaded from a library website.  The audiobook tab is visible in iTunes but none of the audiobooks are there.  They are on my iPod nano.  Please help!

    I have iTunes 10.6.3.25 and I can't find my audiobooks that I downloaded from a library website.  The audiobook tab is visible in iTunes but none of the audiobooks are there.  They are on my iPod nano.  Please help!

    When you say they are displaying in your iTunes library, are you talking about the Audiobooks section of your iTunes library and not the audiobooks section indented under the iPod in the left pane of iTunes under Devices?
    Is the iPod Shuffle configured to sync audiobooks or do you manually manage the iPod's contents?
    B-rock

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • My iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?

    my iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?

    With that behavior you need to take the iPhone to an Apple store genius bar for an out-of-warranty replacement.  In the US that is $269 for the iPhone 5.

Maybe you are looking for