ISM and DISM resources for solaris 10 ???

Hi everyone!!
can anyone guide me to resources regarding Intimate Shared Memory
and Dynamic Shared memory on solaris 10
i tired searching for them on sun sites but results are mainly for older versions of solaris (solaris 8 etc)
what are advantages to the developer for using them ???
regards,
reinman

Hi.
Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
sunu45 = Sun Ultra45/Ultra25 Recommended
sftxk = Sun Fire T1000/T2000 Recommended
sfv2x5 = Sun Fire V215/245 Recommended
sfv445 = Sun Fire V445 Recommended
Mod.

Similar Messages

Link of solaris 10 and ebs r11i for solaris

hi all,
I need link of solaris 10 and oracle ebs r11i for solaris to download.
Please send me
Regards
Rizwan

I did not find any link for solaris 10 32 bit,
I also still find no link in edelivery.oracle
please send me both link for solaris 10 32 and its related EBS versionOracle Apps 11i is no longer available for download and you have to log a SR and ask Oracle Support to send you the Media Pack.
For Solaris 10, please refer to:
Oracle Solaris Downloads
http://www.oracle.com/technetwork/server-storage/solaris/downloads/index.html
Thanks,
Hussein

Websites, books, and other resources for learning to use Premiere Pro

What websites, books, tutorials, and other resources have you found useful for learning to use Premiere Pro?
I want to make sure that we have a comprehensive list of good resources for Premiere Pro. See this page for a list of high-quality After Effects resources that I put together; I want something like this for Premiere Pro.
I'll start. In no particular order, here are some resources that I've found valuable:
this forum (of course)
Premiere Pro Help documents and Help & Support pages in several languages
Community Help search for Premiere Pro
Getting started with Premiere Pro by video2brain
Premiere Pro CS5: Learn By Video by video2brain
video tutorials on Adobe TV and Video Workshop
Premiere Pro CS5 Classroom in a Book
Premiere Pro team blog
Premiere Pro team Facebook page and Twitter feed
PPBM5 (Premiere Pro CS5 benchmark) for performance information
Best of Premiere Pro by Eran Stern

> I see mention above of Lynda.com, but either missed Total Training, or perhaps they have merged?
I didn't mention Lynda.com.
And, no, Total Training and Lynda.com certainly haven't merged.
Total Training has some good Premiere Pro stuff, but it's not the first place that I'd point someone for Premiere Pro.

Smpatch and Recommended Patches for Solaris 10

Hi,
Is there any way to make smpatch only retrieve recommended patches for Solaris 10 ?
I've seen several forum posts saying to use
smpatch set patchpro.patchset=recommended
but other posters indicate that this only works for Solaris 9 (additionally, it doesn't seem to work at all currently:
Failure: Cannot connect to retrieve recommended.zip: Not Found )
As far as I'm aware, Sun's patching policy is to apply the Recommended patches, as well as any that address specific issues you are having. This seems to contrast with the behaviour of smpatch which grabs all patches..

Hi.
Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
sunu45 = Sun Ultra45/Ultra25 Recommended
sftxk = Sun Fire T1000/T2000 Recommended
sfv2x5 = Sun Fire V215/245 Recommended
sfv445 = Sun Fire V445 Recommended
Mod.

Java and Oracle support for Solaris 10?

Hi
Does anybody know when Oracle plans to support Solaris 10?
We plan to purchase a Opteron server and would like to use Oracle.
We also plan to use Sun Java AppServer Platform Edition. Any idea when that will support Solaris 10?
Am I correct in assuming that Solaris x86 will run fine on an Opteron system.
thanks in advance

Oracle support Solaris 10 x86 but I doubt it's native 64 bits. The App. server is supported just go to Sun's site. The short answer is that Oracle and the App. server should both work but not necessarily in 64 bit mode.
As for the Opteron system, you should check the HCL.

Exchange permissions for calendars and other resources for iCal viewing...

I am trying to track down how one is to set their calendar resource permissions in Exchange to successfully allow another Exchange based iCal user to "VIEW" their calendar (as a delegate). I am also trying to determine if this permission should be the same or different for other resources (rooms, etc.)
Right now
- I am able to view person's calendars that have explicitly set permission to a group/person for "Reviewer"
- I am unable to view a person's calendar who has set the "Default" user's permission to "Reviewer" (One would think that "Default" would be a greater catchall.
-I am unable to view resource (room, etc) calendars with the default permissions. Am currently investigating with our Exchange Administrators what the permissions are at default.

Yes, it is possible. Prior to v3.0, one needed to choose over-the-air vs. iTunes syncing of contacts/calendars. Then, it was still possible to have both personal and Exchange data, but the personal data had to come from MobileMe. Currently, it's possible to have an Exchange account on the iPhone and also to sync personal contacts/calendars via iTunes; multiple email accounts including an Exchange account have been possible since v2.0.
FYI, I currently have an Exchange account, and I sync my personal contacts/calendars via iTunes from my Mac.

Resources For Solaris

Hi,
I'm new to Sun Solaris world, as I know the following website is provided junk of the document or user manual for Salaris
http://docs.sun.com/app/docs/prod/solaris.10
But I don't which document or user manual that I must be start from.
So do some body can tell me which is the best document or user manual for Salaris is for newbies or beginner, please help me to list or arrange 1 by 1 of those document or user manual for Salaris from above URL. Anyway, if yours have any good website for learning Sun Solaris please kindly reply me.
Good Day, Thanks
Rg,
Frank Ong

Hi,
I'm new to Sun Solaris world, as I know the following website is provided junk of the document or user manual for Salaris
http://docs.sun.com/app/docs/prod/solaris.10
But I don't which document or user manual that I must be start from.
So do some body can tell me which is the best document or user manual for Salaris is for newbies or beginner, please help me to list or arrange 1 by 1 of those document or user manual for Salaris from above URL. Anyway, if yours have any good website for learning Sun Solaris please kindly reply me.
Good Day, Thanks
Rg,
Frank Ong

Communication and Mob. availability for Solaris Intel or MacOS X Intel?

if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?

I successfully connected an Intel Xserve to an EMC Clariion X600 array this past summer for testing purposes. Just make sure you get the UUID of the SAN from the System Admin of the SAN array. Similarly you'll have to give the SAN admin the UUID for your Fibre Channel interface. The UUID is like an Ethernet MAC address and allows you to see the SAN array over the Fibre Channel connection. We also had to get an SFP adapter for our Fibre Channel card as our SAN switch was all fiber optic connections.
Once we configured both ends of the Fibre Channel and the System Admin had allocated a 100GB slice to my UUID, I initially couldn't see the SAN. After about a day of delays and double-checking the SAN admin rebooted the SAN, I rebooted the Xserve and the 100GB slice magically showed up in Disk Utility as unformatted storage directly attached to the machine. I don't know if there's any trick to configuring the Clariion box. I know they made no adjustments or changes to get the Mac to work on the SAN side. The system admin of the SAN kept saying, "We've never done this before,... You have to install the drivers for the SAN,... what interface is the Mac using?...Who manufactures it?...Do they provide any drivers whatsoever for the Mac?...
Also our on-campus Mac re-seller directed me to alienRAID.org
http://alienraid.org/
There's some entries there on hooking Apple Fibre Channel to Clariion hardware:
http://alienraid.org/article.php?story=macosxemcsupport

Need IMAP and POP for solaris 8

Hello,
I need to install impa and pop agent for solaris 2.8 machine and can anyone please help out where I can file them or buy them ?
Thanks
-K.Kim-
[email protected]

There is a freeware IMAP daemon available on the
Solaris 8 companion software CD.
http://www.sun.com/software/solaris/freeware/index.html
-- richard

How install and configuring sudo in solaris 8

I need install sudo in a zone with solaris 8 conteiner have solaris 10 ¿can a help my?
Adolfo

We don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details.

Install and configuring SAMBA in Solaris 8.0

Hi
Can any one help tme to install and configure SAMBA on solaris 8.0
Thanks in advance

We don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details.

JASS for solaris 10

Has any one heard any thing about sun releasing JASS for solaris 10. This is a handy little tool....

Only that they will be updating and releasing JASS for Solaris 10. I don't know when.

Multimedia Cluster / software distro for Solaris 9

Hello all!
I was wondering if there is any sort multimedia cluster available for Sun OS 5.9. A software distribution having some sort of multimedia applications for video, audio and stuff.... Otherwise one gets bored sometime on dry solaris. Had heard previously about Sun MediaCentre...What about it? Is it still available from SUN?? Are there any other third party clusters available ???

There's plenty of stuff out there you can get for multimedia: xmms, xine; there are even Windows media player and Real Player for Solaris floating around...can't get them from the official sites anymore, I don't think...

How can I use the "gcc compiler and emacs editor" in Solaris 8 for Intel?

I installed Solaris 8 for Intel to my desktop computer.
After the installation, I found I couldn't use the companion software (the software CD included in the Multilinugal Media Kit for Solaris 8) - especially the emacs editor and gcc compilers.
I certainly installed the companion software to my computer. And I can identify that those softwares are
really installed to my system. In order to check out whether I installed them or not, I went to the "System Administrator" and opened the "Solaris Product Registry", in which I identified that all the files in
the companion software were succesfully installed in my computer.
However, when I open terminal or console box and tries to use those
software, the system responds that "there is no emacs or gcc."
Why I cannot use those things?
Did I install the companion software wrong?
I really don't understand why I can't use them.
For your reference, I saw the directories "/usr/bin" and "usr/ccs/bin"
too.
In /usr/bin I typed
#as
and no such command.
In /usr/ccs/bin
#as
and also no such command
was what I had as a response.
If I installed the companion software CD correctly and if they are installed somewhere in my computer,
where I can find them and how I can use those softwares?
Lastly, whenever I try to connect to my ISP via telnet mode, I see this
message.
"Try to connect ...
connected to ***.***.***.*** (IP address of my ISP)
Closed by foreign hosts."
Is there any one who knows why this happens?
Thanks for reading my question.

gcc and emacs install in /opt/sfw. You should change your path statement to include /opt/sfw/bin and should obtain the FAQ from sunfreeware.com. The FAQ answers all your questions.
I have installed gcc and gtk and am using both at this time.
[email protected]

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

ISM and DISM resources for solaris 10 ???

Similar Messages

Maybe you are looking for