Isn't there any sound output on HP w2558hc??

I can't find out how to get any sound OUT (for headset) of my screen...is it just me beeing silly or isn't there plugin  pls help

Your HP W2558hc LCD Monitor DOES have integrated speakers. To get external sound working, you do have to connect
the sound cable from the back of the monitor to the sound output port on the back
of the computer tower. The speaker wire should have a light green colored, male, single pole mini RCA
plug which you would match with a light green colored female sound jack on the back of the tower.
In order to get sound through your headphones, you should locate the jack on the front of the computer
with the headphone symbol beside it and plug the headphone into it.  
"While I am an HP employee, I am not a expert on all our products.
If I offer advice, I'm not speaking for HP on how to solve an issue,
but I'll do my personal best to help you."
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Similar Messages

  • Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
    http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
    This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
    Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
    Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

  • TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

    I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

    What version of iMovie?
    What camera?

  • When phone not muted, why isn't there any audio when using facetime?

    When phone not muted, why isn't there any audio when using facetime?

    What version of iMovie?
    What camera?

  • After updating to 12.1.2.27, songs play, but without any sound output to internal iMac speakers

    So i updated to 12.1.2.27 and songs 'play', but without any sound output. Checked my audio settings and had it at Internal speakers. Checked the speakers (they work, at least for YouTube vids), restarted machine, etc and no audio output from iTunes. Any suggestions? Am I missing something?
    Thanks in advance

    Try unchecking Sound Enhancer and Sound Check in your Preferences under Playback
    Sound check may have reduced everything to a low output level inadvertently.

  • Isn't there any way

    how to find plugins and enabling vcenter converter in Vcenter 2.0
    Isn't there any way to run converter  on any physical machine and , generate the vmdk files to the  same physical machine

    Today there is 7.0.3 Update, try this, it may help your iPhone. Also, Restore is more thorough than Update, use current iTunes on computer and Restore the iPhone.

  • Isn't there any way yet to root NEO V 2.3.4 BN 4.0.2.A.0.62 ?

    isn't there any way yet to root NEO V 2.3.4 BN 4.0.2.A.0.62 ? without downgrading
    Solved!
    Go to Solution.

    I'll let you know if I see anything about rooting .62 w/o unlocking the bootloader, just consider downgrading and if you do want to downgrade just backup your current firmware it's all explain in my thread
    http://talk.sonymobile.com/thread/38251
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Why isn't there any African American emojis

    hello!?
    My name is Robert...I have been an apple user since the 1st gen iPod and I have owned nothing but iPhones since the day they came out.
    3,3s,4,4s,5c,and 5s
    im saving for for the new one but am skeptical about the 6 cause it's so new wait out the bugs.
    but honest question...why isn't there any African American emojis....everyone's always thought about it like haha ya right and blah blah blah about it but seriously there should be at least a couple for racial diversity...there's Chinese ones Hindu ones white ones but no Others...could this be solved?!

    Decisions about the encoding of new emoji or similar symbols are made by Unicode.  You can find out about the process they use at
    http://www.unicode.org/pending/proposals.html

  • [SOLVED] MPD isn't making any sound while running as its own user

    I can't make MPD produce any sound when it runs as its own user.
    - I'm running MPD from systemctl
    - If I run MPD as my own user I get sound
    - I am not using pulseaudio
    - mpv, for example, plays sound fine
    - speaker-test -c 2 -D hw:1 plays sound fine
    - journalctl -u mpd gives errors of the following type:
    Jul 26 15:08:25 alexei-desktop mpd[5951]: alsa_output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": No such file or directory
    Jul 26 15:08:25 alexei-desktop mpd[5951]: output: Failed to open audio output
    Jul 26 15:08:25 alexei-desktop mpd[5951]: player: problems opening audio device while playing "deep_medi/releases_volume_one/01-Kalawanji.flac"
    /etc/mpd.conf for sound outputs:
    audio_output {
    type "alsa"
    name "My ALSA Device"
    # device "plughw:1" # optional
    # format "44100:16:2" # optional
    # mixer_type "hardware" # optional
    # mixer_device "default" # optional
    # mixer_control "PCM" # optional
    # mixer_index "0" # optional
    My ~/.asoundrc looks like this:
    pcm.!default {
    type plug
    slave.pcm "dmixer"
    pcm.dmixer {
    type dmix
    ipc_key 1024
    slave {
    pcm "hw:0,0"
    period_time 0
    period_size 1024
    buffer_size 4096
    rate 44100
    bindings {
    0 0
    1 1
    ctl.dmixer {
    type hw
    card 0
    > groups mpd
    audio mpd
    > aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Last edited by PlasmaSheep (2014-08-02 03:45:07)

    Sure, sounds good.
    > aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    > lsmod | grep snd
    snd_hda_codec_realtek 54803 1
    snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
    snd_hda_codec_hdmi 40396 1
    snd_usb_audio 131860 2
    snd_usbmidi_lib 21428 1 snd_usb_audio
    snd_rawmidi 20278 1 snd_usbmidi_lib
    snd_hda_intel 22831 2
    snd_seq_device 5244 1 snd_rawmidi
    snd_hda_controller 22911 1 snd_hda_intel
    snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
    snd_pcm 83207 6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 19294 2 snd_pcm
    snd 61276 18 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    soundcore 5551 2 snd,snd_hda_codec
    usbcore 188381 7 snd_usb_audio,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid
    > cat /etc/modprobe.d/alsa-base.conf
    options snd slots=snd_usbaudio,snd_hda_intel
    options snd_hda_intel index=0
    options snd_hda_usbaudio index=1
    I'm not exactly sure what to put in ~/.asoundrc, however...

  • Are there any sound cards with best driver support for Arch?

    I was wondering if there are any sound cards that have the best driver support for ArchLinux? I currently own a Creative Labs X-FI Platinum Edition. The main reason I like the Platinum is that has an interface you can plug MIDI and Audio ports into. It seems to me, however, that Creative is the worst company to support Linux drivers. If anyone has any opinions, please feel free to comment. According to all my research, ALSA sound drivers are the most supportive for sound. Am I also correct in this assumption?

    yeah, creative sucks. go with m-audio. they support linux unlike creative.

  • Isn't there any support???

    This VM is horrid, and I've had a few issues that fellow users were not able to help resolve. Isn't there some tech at Sun who can help? I'm tired of being able to NOT use Java apps because of this illegible font issue. I hate being forced to use the Sun Java VM, ever since Microsoft ditched theirs. What happened to our options?

    OK, good point. That was a poor analogy I made. How
    about this: let's say there was only ONE type of
    automobile in the world, made by me, and I gave it to
    you in a malfunctional state. You would at least
    complain about the fact that there are no other
    options available, wouldn't you?You can certainly complain.
    But if you want me to fix it (your analogy) then I am going to be a lot more likely to do it if you pay me. A lot more likely.
    And that is as volunter.
    Think of it this way - do you go to your bank and insist that they help you balance your check book every month? If you paid them do you think they would be more willing? Or say you kept a billion dollars in your checking account - perhaps then?
    >
    And BTW, the creators of the Java applets are NOT the
    problem. Several applications that look just fine on
    Microsoft's VM are severely hosed in Sun's. LiveStats
    is one of these applets. WebPac (a library catalog
    system) is the other. Here are cropped screenshots:
    And BTW, the creators of the Java applets are NOT the
    problem. Have you done a lot of work with html, using complicated layouts etc and then tried to display them on different browsers? Or even diffferent browser versions?

  • Indicators cannot be viewed on the screen - isn't there any solution ?

    in p6v7 Indicators cannot be viewed !
    I've created UDF to use indicator but when that UDF is used in layout , indicators are not viewed on the screen (words coming out)
    is there any option or something like that to make it work on the screen?
    and also I'd like to get indicators on he print out .
    your support will be appriciated.
    he.

    Depends, if you've synced with this iTunes, while that passcode was enabled, you won't be prompted to enter the passcode when connecting your phone. If you have not synced, while that passcode was enabled, you will. So, if you fall in the later, there is no way to do what you want.

  • Why isn't there any music in my music app but sound is good everywhere else?

    I able to go hear sound on my iPad except when i go into my music. Is there something i have to adjust in my settings? very frustrating!

    If there are music tracks in the Music app but your can't hear them, then make sure that you haven't set the volume limit for the app at the minimum : Settings > Music > Volume Limit

  • When my phone is locked, and I get a text message, it isn't making any sounds. When the phone is in use and I get a text, it makes the alert sound.

    When I get a text while the phone is locked it doesn't make the designated alert sound, but it does if the phone is unlocked and in use.

    I think you have the 'do not disturb' function enabled. If there is a moon icon in the top right of the home screen that will be the problem. Go to settings,  do not disturb, and make sure manual slider is off. I had the same problem and took me a day to figure out.
    Good luck

  • Upgraded to Lion and now my iMac doesn't recognise any sound output devices?

    Any ideas on how to solve this? "No output devices found" is what the system preferences show under Output.

    Hi Philip..
    Preferences (.plist) may be corrupted after the upgrade ...
    Go to ~/Library/Preferences
    Move the com.apple.systempreferences.plist file from the Preferences folder to the Trash.
    Restart your Mac.

Maybe you are looking for