ISO 4 will not install in my 3 year old touch
I have been trying to install ISO 4 for almost a year. The process gets stuck on "Backing up Ipod Touch". I let it go several hours and it didn't progress.
If it's an original iPod Touch, then you can't go beyond 3.1.3. If it's a 2nd generation, I wouldn't recommend 4, as the iPhone 3G had a lot of issues running it reliably, but you could try to do a restore, as opposed to an upgrade. Just remember, once you upgrade, you can't go back.
Similar Messages
-
Lion will not install on stock 1 year old mini
I got the "cannot create recovery partition " error when installing lion
It is a stock machine, no vm software or other changes.
Model Name: Mac mini
Model Identifier: Macmini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.00AD.B00
SMC Version (system): 1.35f1
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/disk0s2 155954992 51869100 103829892 34% /
devfs 107 107 0 100% /dev
map -hosts 0 0 0 100% /net
map auto_home 0 0 0 100% /home
Avraam Jack Dectisalso:
# fdisk /dev/disk0
Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 312581807] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused -
New computer w/windows 7 will not install back up disks from old computer
I have been trying to install my backup disks from my old
computer onto my new computer, which is Windows 7. It starts to
import, then after about 10 songs, it will not import any
more. I have an iPod touch, so I don't think I can use it to import the songs. Any ideas on how to solve this issue would be greatly appreciated.
Thank you!!Why don't you try to first copy the contents for the CDs to your hard drive and then just add the files to your library?
-
The software update will not install on my 3rd gen. iPod Touch
I've downloaded the software update to my computer, but when trying to install it to my iPod, it fails halfway through. I gave it about 5 hours the first time, but the progress bar didn't budge. I would reinstall the update but I don't know how to do that.
Can anyone tell me what's wrong?
(I am updated to iTunes 10)i would recommend you don't upgrade because ever since i upgraded my ipod had to be restored and now all my songs skip. i never had this problem with my 3rd gen touch until the upgrade
-
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD -
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please HelpI was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP -
iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2 -
Quicktime will not install on my PC - also stopping iTunes from working
Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
JamesSays windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
The new ACR 5.5 update will not install in Elements 7.0
Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
BenHi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush -
Java applet will not install in browser
My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG 54 KBHow are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified -
Macbook Pro SMC update 1.3 will not install
Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88 -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT
Maybe you are looking for
-
Inventory Audit Report - Zero quantity but with value
Hi All, Our client are using FIFO costing, due to some backdated transaction we get 0 Qty but the value is not 0 when running Inventory Audit Report base on posting date (system date is fine) at the month end. I understand that the system calculate t
-
Unordered list bullets and Spry Accordion widget
In all browsers except IE (surprise, surprise!), the page works fine. Otherwise the bullets in my unordered list appear at the bottom of the multiline text they are associated with. I haven't had this problem in similar pages not using the accordion
-
Since I installed 10.4.7 the number of msgs in the inbox has disappeared on the mail icon in the dock. I checked and the Helvetica font appears to be enabled. Any ideas?
-
I can't use HD4000 under Windows 7 and 8?
I installed Windows 7 in my rMBP(15 inch), but I found HD4000 was disabled under Windows 7(the same to Windows 8), only GT650M can be used. Who can help me?
-
Petition: zencast- please sort out rw / ff / time display on podca
I am enjoying the new Zencast software but I really would like Creative to sort out the rewind, fast-forward and time display for audio podcasts, in time for the final version. I believe that I am not the only one experiencing problems. On my Zen Tou