Iso 6 how come this destroys your ipad wifi? how can you stay connected?

Why do you lose your connection to wifi when you down load iso 6?

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

Similar Messages

HT4061 my memory is low on my ipad and i can not stay connected to the internet. How do I fix this problem

My ipad will not stay connected to the internet. the message in the settings says low memory. How do I fix this problem?

Go to Settings > General > Usage and you will see the memory consumers. Remove some of the big stuff.

Connected to wifi but can't stay connected to internet

I currently have a curve 9300, and my service provider is Telus Mobility. I am connected to wifi and up till about 3 days ago everything was working fine, now it shows I am connected, but I can only get on internet for about 5 mins, I have to shut off all my connections then reconnect them for it to work again. Any ideas as to the problem?

OK...then, with your WiFi radio OFF (e.g., solely running on your carrier data network), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
If not, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, does the behavior still present? If not, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
If the behavior does still present in Safe Mode, then you may want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How come apps crash on ipad's when deployed through iphone configuration utility?

When installing app's to nine iPad 2's, they install, however, they crash on startup for each user. How come this happens?

I purchased the app on one of the ipads, sync'd it to itunes, and imported the app file into the IPCU and selected install with the ipad's connected to the computer that IPCU is running on.
What is best practice to deploy these app's (without having them crash) to multiple ipads (whether it be with a wire or wirelessly)?
Also, to answer your question, yes the ipads have all other functionality - safari works, settings are able to be customized, and everything else works (except for the apps installed)

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

How to get on your ipad when it is disabled

how to get on your ipad when it is disabled

FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

How come this program compiles?

class Base
     Base()
          int i = 100;
          System.out.println(i);
public class Pri extends Base
     static int i = 200;
     public static void main(String[] args)
          System.out.println(i);
          Pri p = new Pri();
i get very confused here. in the main, the value of "i" will be printed to the standard output even before the class Pri is instantiated! how come this program can compile?
your help will be very much appreciated.
eileen2

This is because your class Pri extends Base. Because you didn't specify any class Pri constructor, java automatilcally created a no-argument constructor of class Pri with a call to the superclass constructor Base(). You can validate this by adding another Base constructor with arguments and then removing the no-argument Base constructor. Pri() will not compile.

I have just purchased an ipad 2 (already have an inpad1) and after syncing through itunes it will not conncect to my home wifi connection. The first ipad connected immediately when bought. this one indicates my wifi address but states not connected.

I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!

What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc

How come the white color ipad's body is in silver color?

I just got my ipad 2 today.. I really disapppointed when i see some diffrent.. How come the white color ipad's body is in silver color? But yr webpage show the body is white?

Um.....you're not writing Apple here. This is a user to user forum. But, perhaps you should have looked at some more pictures of iPads prior to ordering one. All iPads (Black face or White face) have silver metal bodies, that wrap up the side to the glass front.

How do I set my ipad wifi to remember my password?

How do I set my ipad wifi to remember my password at home?

1. Try updating your router firmware.
2. You can also try and change the SSID and password of your router.

How to get into your ipad if you forgot your password

How to get into your ipad mini if you forgot your password

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

TS4006 when using iCloud between mac and pad, what does this mean - "your iPad will no longer back up to your computer automatically when you sync with iTunes"

when using iCloud between mac and pad, what does this mean - "your iPad will no longer back up to your computer automatically when you sync with iTunes"
DONT WORRY EVERYONE, FOUND THE ANSWER I NEEDED FROM ANOTHER POSTING - THANK YOU

Welcome to the Apple Community.
You don't need to do anything, you have chosen to back up to iCloud instead of iTunes.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

How come my Apples (Mac, Ipad and Ipod) quit syncing calendars?

How come my Apples (Mac, Ipad and Ipod) suddenly quit syncing calendars. It was working great for 5 months and now they're all mad at each other.

Are you a MobileMe subscriber and sync calendars using it? If so, did you upgrade to the new MobileMe Calendar before the deadline of May 5th?

HT4095 What happens if the genre box goes missing on the top left corner on your iPad? How do I get it back?

What happens if the genre box goes missing on the top left corner on your iPad?How do I get it back please help me.

Try quitting iTunes and restart your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You can also try a reset if quitting the app doesn't work.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Iso 6 how come this destroys your ipad wifi? how can you stay connected?

Similar Messages

Maybe you are looking for