ISO code 0 is not correct in the VAT registration number

Hello everyone!
Where can I adjust this error message so that I can make it as a Warning only? Thank you.
Message No. AR191 -- ISO code 0 is not correct in the VAT registration number

Dear Marlon
Goto
IMG>SAP Netweaver>general setting>set countries>Define Countries in mySAP Systems>select the coutry and double click on it>u will get properties tab under which ISO code is defined. Here u have to enter country name in ISO CODE and ISO code 3 char [enter the relevant 3 char as per your country.
Also check Set Country-Specific Checks--> double click on country and check the length and checking rule (ex vat reg no)
Hope your problem will be resolved
Regards
Sandeep Bhowmick
Edited by: Sandeep Bhowmick on Sep 29, 2009 12:00 PM

Similar Messages

ISO code 57 is not correct in the VAT registration number

Hi Gurus,
When we are trying to upload the customer master data, while entering the VAT No it is saying the following error:
ISO code 57 is not correct in the VAT registration number
Message no. AR191
Could some body help me out.
regards
Srikanth

Hi,
Reason can be due to,
The length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.
There are few rules defined for
1          Maximum value length, without gaps
2          Maximum value length, numerical, without gaps
3          Length to be kept to exactly, without gaps
4          Length to be kept to exactly, numerical, without
5          Maximum value length
6          Maximum value length, numerical
7          Length to be kept to exactly
8          Length to be kept to exactly, numerical
9          Check against country-specific edit format
0          Deactivate Postal Code Check for USA

ISO code LU is not correct in the VAT registration number

HI,
Can a France customer have the Luxembourgish VAT registration number. If Yes. how can i configure this?

Hi,
Reason can be due to,
The length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.
There are few rules defined for
1          Maximum value length, without gaps
2          Maximum value length, numerical, without gaps
3          Length to be kept to exactly, without gaps
4          Length to be kept to exactly, numerical, without
5          Maximum value length
6          Maximum value length, numerical
7          Length to be kept to exactly
8          Length to be kept to exactly, numerical
9          Check against country-specific edit format
0          Deactivate Postal Code Check for USA

Determining the VAT registration number

Hi All,
As per my understanding, we can control Determining the VAT registration number through Certain pre defined rules (first either Sold to Party or Bill to Party & then Ship to Party).
My requirement is to determine VAT Reg number based on Ship to Party which is not there in standard VAT determination rule.
Can some one guide me if there is any enhancement / Exit or any other config available through which I can make Determining the VAT registration number based on Ship to Party.
Regds
Amit Kumar

Hello Raghavendra,
Thanks, The issue has been resolved as per SAP note suggested by you.
Amit

The VAT registration number already exist while extending the CMR

Hi All,
We are already having a customer master record for two sales area(one for spain and another one for Netherland). Now we are extending the customer to a new sales area for the country Romania.
But while extending the customer we are getting the error message "The VAT registration number already exist".
Awiting your reply.
Thanks in advance.
Sushanta

Hi,
Just make sure that your customer basic country belong to the European Union. You need to select the OTHER Tab of the Vat Registration number . Enter Romania and its respective VAT number.
Just try this and let me know if it working or Not.
Regards
Balachandar

How to fetch the VAT registration number of the ship to party from billing

Dear SDN Team
How to fetch the VAT registration number of the ship to party from the billing document. Can you proide some information for fetching the VAT registration number of the ship to party.
Normally only the payer VAT registration number will be displayed in the Invoice. But in my case the Ship to party VAT number is displayed.
I have resolved this problem by doing the customizing setting in order to have the payer vat registration number. But for the Old Billing documents it is more than 30,000 documents where it was printed with the ship to party VAT number. So i need to identify those documents.
Can you please help to resolve this problem.
With Regards,
Jai

Hi,
To get VAT from the ship to from Billing, You have to first fetch the BILLING NUMBER from the VBRK and then goto the Document flow in VBFA to get the SALES DOCUMENT NUMBER and with sales document you will get the SHIP TO number from the VBPA with the PARVW = SH
Once you got the SHIP TO , then goto the KNA1 and get the VAT ID in the field STCEG
so the logic will be as follows
VBRK---VBELN and then
VBFA--VBELN with the document Category as C
VBPA-VBELN and get the KUNNR with PARVW =SH
Now with KUNNR ( ship to ) get the VAT ID from KNA1-STCEG
regards,
santosh

INTRASTAT Dispatch Report not Showing VAT Registration Number

Hi
we have currently set-up the intrastat report in our systems, during the testing of the scenarios we notice that for dispatch (RVEXST00) report the line item for returns does not display the VAT registration number, am not sure if anyone encounter this problem before. We would like to know is this common or could be a bug in the program. We could not find any references pertaining to this topic, hope to have some feedback.
Regards
Ken

Read the below SCN details:-
VEFU - Manual add entries for INTRASTATE declaration
Regards
Waza

VAT Registration Number & VAT code & VAT rate

Hello Gurus,
I am trying to find out,
1) How can I retrieve (either via a table lookup or function module) a list of VAT codes & VAT rates by
    Legal Entity and Country?
2) How can I retrieve (either via a table lookup or function module) the VAT Registration number by Legal
    Entity/Country/RE?
Any table or function module which can provide me the data is fine.
Please help.
Thanks in advance.

Hi Kumail,
1. List VAT Codes : use table T007A
    VAT Rates : You can use table KONP, or use function module GET_TAX_PERCENTAGE
2. VAT Registration Number is usually maintained in Tax Number 1 in Vendor Master, so you can found it in table LFA1-STCD1

VAT registration number in combination with country and company code

Hi,
Is there configuration where we can define the VAT registration number with combination of country and company code.
thanx in advance

Hi,
Thanx for the reply.bt the issue is like we have a condition type zvat where condition table have the following fields departure country and destination country,The country of our company code is GB and we maintain a record for condition type zvat i.e GB (departure country) to GB (destination country) 17.5%.While creating a contract if vat is applicable we told user to maintain country GB in both the fieds i.e tax departure country and tax destination country in billing tab at header level of the contract .It is working fine for other company where company code country is different then GB.But for this where company code country is GB.An error occurs i.e.There is no vat registration number fot this comapny code XXXX for country GB.
Now how should i go about it?

Copying vendor's VAT registration number into FI Document

How do I get the vendor's VAT registration number from the vendor's master record to copy into the FI Document when posting a vendor invoice via tcode F-43.
Now, BSEG-STCEG is always blank now on all our vendor invoices. Also, the branch account, BSEG-FILKD, is blank. All vendor invoices are manual journals via F-43.
I think I need to configure SAP so that the user must also enter the Branch Account when posting to a vendor in tcode F-43. Then, I think that SAP standard will lookup the Branch Account Vendor to copy in the VAT registration number into BSEG-STCEG.
I see that my customer invoices posted via SD are correctly being populated with the Branch Account of the Sold-To customer.
I further see that SAP standard code in MF05AI10_STCEG_PRUEFEN appears to only update BSEG-STCEG via the Branch Account (BSEG-FILKD) and not via the vendor (BSEG-LIFNR).

Hi All,
I'm facing the same problem, kindly let me know how do I get the Vendor's VAT registration number while posting invoice. As every time when I'm trying to post vendor invoice the system ask for the customer number and the Reporting country and pick up the VAT reg. no. from the customer master base and not from the vendor master base.

Wrong VAT registration number in billing document

Hi All,
We have issue of wrong VAT Registration Number determined in the billing document for the departure country SK & Destination country DE. In one case system has determined the own co, tax number in the VAT registration number and other case ship-to party's VAT registration number for same partner.
As per business wants ship to party VAT number only.it was created few days back.
Pls advaise on this.
Thanks,
naveen

Hello Naveen
For tax exempt, Intra-EU transactions, you need to specify both the VAT registration number of the company code and that of the customer. See the SAP documentation link below.
I don't have any advice on the config for the issue- why it prints co code VAT registration number once and that of SH party another time.
Please go through the following OSS note and those mentioned within for complete guidance on customizing for VAT for EU countries. There's a lot of stuff to take care of.
653544 - EU2004:New members of Europ.Union as of 01/05/2004
Help Documentation: http://help.sap.com/erp2005_ehp_04/helpdata/EN/e5/07804b4acd11d182b90000e829fbfe/frameset.htm

Wrong Vat registration number in S_ALR_87012357- Advance tax return

Hi All,
When we run the report S_ALR_87012357, the Vat registration number of the customer is appearing as wrong. It is picking up the Vat registration number of the company code, instead of the one maintained in the customer master data.
Can somebody please help me with this?
Regards,
Abhishek

The std SAP report does not have the VAT # - It looks somebody added the VAT info to the report. Please check the config under SPRO.
Additionally, I think this comes from the Plant and NOT Co Cd.

Check VAT Registration number

Hi,
Where is configured rules to checking the VAT registration number for country specific edit format (9)?
Regards,
Ionel

HI,
In transaction OY17 ,you can maintain country specific checks related
to VAT reg number.
Note 4271 for your review.
Reg
Madhu M

Replace VAT registration number when create invoice

Hi All Expert,
I want to replace the VAT registration number (VBRK-STCEG) with some useful information when create invoice.
For e.g. Sales Order number.
I've check the user exit RV60AFZC Form USEREXIT_FILL_VBRK_VBRP,
but when I instead the code there, the VAT registration number still is BLANK when create the invoice using VF01...
Please help.
Terry

Hi
As per my understanding you want to display the sales order number in VAT Registration no. field. Actually this data is coming from Customer master (t-code XD02) in genral Data's Control Tab.
Now your concern is to display the sales order no. in invoice. instead changing standard you can make it happen through copy control (T-code VTFL) with your invoice document type to Delivery document type. There is option as Reference and assignment at header level of copy control.
Change the option of displaying sales order no in any of them. as per your config there your sales order no will be display in your billing header in assignment or reference field.
Regards
Shambhu Sarkar

VAT Registration number in F.12

Do we have any way to get the VAT Registrator number in the report (S_ALR_87012357) or in any other tax reports. Kindly let me know
Regards
Madhava

Ourslef

ISO code 0 is not correct in the VAT registration number

Similar Messages

Maybe you are looking for