ISO image for Sun Fire v60x diagnostics CD

The only thread I can find on this diagnostic CD is from 2006:
Re: ISO image for Sun Fire v65x diagnostics CD...
The link posted in the forum:
"Sun Fire(tm) V60x, V65x Diagnostic CD 4.0
This distribution offers the Diagnostic CD image (Sun Fire(tm) V60x, V65x Diagnostic CD Release 4.0) supporting Sun Fire V60z and V65z products.
http://www.sun.com/download/products.xml?id=441f6709" (The download link on the page does not work).
Does not work due to the shift from Sun to Oracle.
Can anyone point me in the right direction for the file? I've been searching for months.
Thank you.
Edited by: user13455836 on Mar 21, 2011 12:46 PM

Hello,
it should be possible to locate these files via the migrated (Sun) System Handbook.
This is a blog entry about the new location of the System Handbook (review the 3rd comment)
http://blogs.sun.com/patch/entry/goodbye_sunsolve_helloooo_mos
Maybe the user Nik (http://forums.oracle.com/forums/profile.jspa?userID=826741) can help to locate the download. He is very active on these forums and an Oracle employee.
I don't have a MOS account, otherwise I would have been able to confirm if this download is still available. I guess due to the fact that Oracle contracts are more "fine grained", it's possible that downloads only for the systems covered by your service contract are visible.
Michael

Similar Messages

ISO image for Sun Fire v65x diagnostics CD...

I'm looking for an ISO image of the Sun Fire v65x diagnostics CD referred to in section 4.10 of the manual (817-2023-11.pdf). An ISO image is posted for the Sun Fire V20z / V40z. Will this work with the v65x even though it's an Intel vs. AMD system?

Hello,
is this what you are looking for ?
Sun Fire(tm) V60x, V65x Diagnostic CD 4.0
This distribution offers the Diagnostic CD image (Sun Fire(tm) V60x, V65x Diagnostic CD Release 4.0) supporting Sun Fire V60z and V65z products.
http://www.sun.com/download/products.xml?id=441f6709
Michael

ISO Image for IPS 7.0

Hi
I Didnt find the ISO Image for the IPS 7.0,Could y plz tell me the me the full name of it?either for 4215 or 4240 Appliance
Thanks

System image file for IPS 4240: IPS-4240-K9-sys-1.1-a-7.0-2-E4.img
IPS 4215 has reached EOL as follows:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5713/ps4077/ps5367/end_of_life_notice_for_cisco_ids_4215_sensor.html
and the latest supported image on IPS 4215 is 6.0.6(E4).
Hope that helps.

300Gb SAS disk support for Sun Fire V445

Hi,
Can anyone tell me if 300Gb 10K SAS disks are compatible and supported by Oracle for Sun Fire V445's? The disks I have in mind are Sun FRU PN: 540-7869-01.
Any help will be greatly appreciated.
Thanks
Richard

Thanks for your post.
I am finding Oracle's approach to hardware very frustrating. Their ultra conservative approach seems to be motivated by a desire to driving customers to newer, more expensive systems. Can't fit you data on 16 300GB SAS drives in a x4250 that cost $20K - why you can buy a new pillar system for $121,000! Never mind one aught to be able to use 1TB drives.
And the cost of SUN's drives! I mean its not like they actually make them. No, they take Seagate drives, put them in a fancy bracket and charge 10x more!
I am really wondering how much longer I will stay with Oracle! I mean my PC can hold more data than my x4250 that cost 15x more! And Linux may soon have the ZFS capability. So why Oracle?

How to create ISO images for Solaris 10 U6 (10/08) SPARC CD 1 and DVD

The format of the bootable DVD and CD 1 of Solaris 10 U6 sparc has changed from previous Solaris 10 update's sparc media, it now seems to be more like the x86 format, can anyone provide the new/specific mkisofs command to use to recreate (modified version) a sparc bootable ISO image file of these from their "unloaded" directory paths, I'm guessing the mkisofs command is going to be similiar what's used for recreating Solaris 10 x86 DVD and CD1.

Alan,
Thanks for info, when I try this mkisofs command to recreate the Sol 10 U6 CD 1 ISO image I end up 16 KB short of the original downloaded ISO size of Sol 10 U6 CD 1, the generated ISO image when burn to CD doesn't boot, I tried using both mkisofs version that comes with Sol 10 U6 & version *2.01.01a53*, here's the test I did:
mount Sol 10 U6 CD 1 as /mnt (CD 1 burned from downloaded ISO from Sun that is *512904 KB* in size)
mkisofs -G /mnt/boot/hsfs.bootblock -B ... -l -ldots -R -N -D -V SOL_10_1008_SPARC -o test.iso /mnt
Genereated ISO image file test.iso is *512888 KB* in size and doesn't boot when burned to CD with error messages:
Can't read disk label.
Can't open disk label package
ERROR: boot-read fail
Any ideas?
--Scott

Tools and Drivers for Sun Fire x2200 M2

Does any one have an extra Tools and Drivers Disc for a Sun Fire x2200 M2? Or have the ability to give me an iso for it.
Oracle has locked down the ability to download a copy unless your under support which I highly doubt is legal considering that you can't do several things without the disc.
Please help

No one is going to jeopardize their MOS credentials by giving to for free
what they had to pay money for. They would be subjecting themselves to possibly having all their service contract privileges cancelled by Oracle.

Oracle VM Server 2.0 for Sun Fire v240?

Hi all,
I am searching and trying all day long to install Oracle VM Server on SPARC 64 Sun Fire v240.
I still can not find information is it supported or not?
I have Oracle Solaris 10 5.10 Generic_142909-17 sun4u sparc
the CPUs are UltraSPARC-IIIi (portid 0 impl 0x16 ver 0x34 clock 1503 MHz).
I installed OVM_Server_SPARC-2_0 from https://edelivery.oracle.com/
Anyway the command ldmconfig returns that This is not supported by my platform!
In the release notes of Logical Domain Manager 1.2, 1.3 and VM Server 2.0 is written the supported hardware and I can not see the v240, but I see
Supported Platforms:
Sun Fire and SPARC Enterprise T1000 Servers
Sun Fire and SPARC Enterprise T2000 Servers
Probably this sun fire is not Sun fire v240 but it is sun fire t1000?!
What do you think - is my server supported for any of these versions? Is virtualization possible?
Also I can not download version 1.3 because it's moved to oracle my support section but it was free?
Need your help and support :)
Thanks a lot.

A T1000 servers does not show V240.
uname -a on T1000 output below
bash-3.00# uname -a
SunOS xxxx 5.10 Generic_142909-17 sun4v sparc SUNW,SPARC-Enterprise-T1000
Thanks,
Sudhir

Proper serial connections for Sun Fire v250

I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.

984429 wrote:
I recently purchased a (gently) used Sun Fire v250 for use as a workstation. The machine had a graphics card installed by a previous owner, but I accidentally reset the factory defaults on the SCC (I was having a boot problem, and apparently a brain problem).
My question is, how do I connect over serial to make the default boot up options 'screen' instead of 'ttya'? I know from the oracle docs that I need a specific type of serial cable, but I'm unsure where exactly I can go about finding this. Also, once I get the cable what software (for *NIX or windows) can I use to reset the SCC?
Thanks,
John Lambert
Dychron, Inc.Search for a cisco console cable .... this is a typically a 9 pin to RJ 45 ... usually less than say $10 on at least well known auction site.
If you laptop/desktop does not have a serial get a usb to serial converter as well.
If you have a linux desk OS then it is possible to connect to a serial connection ... from solaris you would use tip .... from linux typically use 'cu' (built it) ... if I remember correctly.
Or use recent versions of PuTTY from windows. ... which can also be configured for serial.

Whats the ISO image for Boot camp assistant.

I'm trying to download windows for my MacBook Air (2013) on Boot Camp Assisstant but i don't know what an ISO image is.

iso is a carbon copy of an optical disc read more here
http://en.wikipedia.org/wiki/ISO_image
any optical disc can with one of 100000 free tools be made into an iso and the other way around

?Burning ISO images for booting on intel.

I have a couple of iso images I'm trying to burn (DVD) as bootable on my iMac. I did it once before under 10.5.8, but for can't remember what I did. Images are vmware ESXi image and a windows server 2008 image. Just used what is on OS X. Do not have any 3rd party software.
Thanks for your help

Use Disk Utility. Drag the .iso file to the sidebar, click it once, then press Burn in the toolbar.

How about putting out ISO images for various downloads

I posted this suggestion before, a year ago, I think. no change. so here it goes again:
It'd be much better to put out ISO images instead of.cpio.gz or .tar.gz file, as
many people I know had to extract the content from the archive, then generate cd images.
There are great free ('mkisofs') and commercial tools to generate iso images.
One may argue that it'd be hard for people don't have cd-rom/cd-rw. Under linux, this is not an issue. iso image can easily be mounted on a loop device and read from.

Hi Nick, I do see information on creating a slideshow with Quicktime at: http://www.apple.com/quicktime/tutorials/slideshow.html
however it appears Quicktime X removed that capability. There is no 'open image sequence' option from the File menu in Quicktime X.
If I do end up sticking with Final Cut - would you recommend any codec and/or dimension size that would result in the best quality or the most crisp image? I also need a few fade in's and out's on various parts - I don't believe I would have the control without Final Cut.
Would resizing the image files in Photoshop to 1920 pixels by 1280 before importing them into Final Cut result in crisper images? Thanks.

Windows 7 .iso image for bootcamp?

I have a mid-2012 13in macbook pro (non-retina). I need to install Windows 7 Home Premium on my computer using bootcamp. In Apple's "Boot Camp Installation and Setup Guide" it says there is an option to install Windows 7 with a .iso image instead of a dvd. I did this to get Ubuntu as well. But I would like to get the .iso image directly from Microsoft, like the apple guide says to. I don't see it anywhere on microsoft's website. Can anyone help?

an iso image is a carbon copy of an optical install disc
http://en.wikipedia.org/wiki/ISO_image
you can make any install optical disc into an iso file using tons of tons of free programs available for both windows,osx and linux
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=make%20optical%20disc%20into%20iso
an iso you make from an official ms install disc would hold the same data as an iso file make by ms from one of their install disc

Looking for the right KVM drawer and switch for SUN Fire v240 and v880

Hi,
We have Sun Fire v240, v880, and four dell servers in a Shark Rack. The LCD monitor and keyboard drawer and the KVM switch were part of the original installation from Shark Rack. The switch and the monitor stop responding from time to time so I am looking for a replacement.
I am surprised that the prices for the KVM drawer are very different from different manufactures. I was just wondering whether I really need a SUN ready certified KVM drawer. If anyone has any experiences(good or bad) with getting a new KVM, please share it with me.
If the KMV drawer is compatible with SUN systems, do I need to install any patch on the system or it's simply plug and play?
Thanks!

For most SPARC based Sun Servers you do not need a KVM switch, but merely a terminal switch which you can attach to the console port of the Sun Server. There are plenty of Terminal Servers to choose from, the most recent i bought was a Cyclade, which works very well and allows you to ssh to a console..
.7/M.

ISO Image for DVD

Hi,
Kindly provide me ISO Image of windows 7 professional 64 bit OS.
So i can download this boot-able ISO image and burn DVD.
Regards,
Jatin Rathod

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to
follow it up. You can also choose to unmark the answer as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members
facing similar problems.
Thanks!
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

DVD Writer for Sun Fire V440

I was wondering if anyone had found a DVD writer that will work with the Sun Fire V440. I would like an internal drive if possible but an external device would also be acceptable.

Hello,
the V440 uses a slimline drive like these ones in notebooks.
Sun doesn't offer a slimline DVD writer (only full-height).
You might be tempted to install a slimline DVD writer for notebooks or server, but you have to keep two things in mind:
- Installing non-Sun or unsupported components voids your warranty/service contract.
- Slimline drives have no jumpers to select master/slave or cable-select . All drives use cable-select (or reverse cable-select). This setting is determined by the firmware of the drive.
If voiding the service contract or warranty doesn't bother you, get a drive from a dealer that is able to flash a new firmware to the drive or can sell a drive with the correct non-Sun firmware (and the correct setting cable-select or reverse cable-select).
Regarding the brands or types of DVD drives used by Sun, review the Sun System Handbook.
Using an external DVD writer in an USB enclosure might be possible, but the integrated USB controller (of the V440) is only USB 1.1 (supporting dual speeds of 12 and 1.5 Mbits/sec) which is insuficient for a DVD writer.
I would recommend that you browse the messages in the solarisx86 Yahoo group.
http://tech.groups.yahoo.com/group/solarisx86/messages
In this group you can find a lot of expertise. Send a single e-mail to one or two people (pointing out that your question isn't directly related to Solaris x86). Posting a message requires joining the group and please keep in mind that your off-topic question is sent to every subscriber of the maillist.
Michael

ISO image for Sun Fire v60x diagnostics CD

Similar Messages

Maybe you are looking for