ISO Image Problem

I purchased a legit copy of XP SP2 from my university and it came as a downloaded ISO image file. I then burned the contents of this file to a cd in hopes to use bootcamp, but when i get to the point where it wants me to put in the install cd, it does not recognize my windows cd. i'm not sure what to do? anoyone else having this problem?

Using that process won't burn the ISO image correctly, all you are doing is making a copy of the ISO image, not actually burning the image itself.
Try using Applications > Utilities > Disk Utility
You should be able to get Disk Utility to correctly burn the image.
Otherwise you are going to need to get some disk burning software (or ask a friend to burn the image for you).
iFelix

Similar Messages

Problem to burn iso image with disk utility

hi,
i burnt an iso image file on a cd using disk utility.
I checked the md5 of the burn, and found it is different than the original iso file.
how do i create an EXACT iso image burn?
more details:
i downloaded file.iso from the web, inserted a blank CD, opened disk utility, chose "burn", then located the image, and confirmed.
after the disk utility announced "success", i wanted to check that the md5 of the burnt cd matches the original. so i used "dd if=/dev/disk1 of=~/file.dd" but i got a completely different file than the original file.iso...
not only that the md5 not match (which could be due to some extra 0 bytes), but i even compared the two files using xxd, and they look similar, but every now and then file.dd (=copy of the brunt CD) has a extra chunk of garbage bytes (and then the files are again the same, and then another chunk of garbage, etc.)
so how do i create a 1:1 burn of file.iso?

The problem here is that most Mac disc utilities, including the built-in Disk Utility, take a different approach when it comes to image burning. Instead of telling the program you want to burn an image, then choosing the file, you're supposed to do the reverse: You choose the file, then tell the program you want to burn it. So, to burn an ISO image to disc, here's what to do:
1.Insert a blank disc.
2.Start Disk Utility.
3.From the File menu, choose Open Disk Image and select the ISO to be burned.
4.In the list of volumes, you will now see an item representing the ISO file.
5.Select it.
6.Click the Burn button and follow the instructions.

Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
Jon

The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

Premiere Elements 11 .iso Image für Blu Ray erstellen

Hallo,
Kann man mit Premiere Elements 11 ein iso Image für blu rays erstellen?
Habe es mit dieser anleitung versucht, aber mir wirt der isoauswahlbereich nicht angezeigt (nur Ordner oder Disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Kann mir jemand sagen ob das mit Premiere Elements 11 funktioniert oder ob das erst ab Version 12 /13 funktioniert?
Danke
And now i trie it in english
Hello,
Is it possible with Premiere Elements 11 Create an iso image for blu rays?
Tried it with this manual, but my host does not appear isoauswahlbereich (only folder or disk)
Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder Blu-ray-Disc
Can anyone tell me if this works with Premiere Elements 11 or whether the only works from version 12/13 me?
Thank You

JGeneratorH
Thanks for the follow up and glad to learn that the Phantom Burner worked for you.
Thanks also for the information on the link to Phantom Burner in the blog post. I will update that link in a few moments.
Please let us know if any questions or need clarification on your Premiere Elements workflows. Glad for the opportunity to be of
assistance.
Best wishes
ATR
Add On...Just updated the Phantom Burner 2.0 link in the blog post and added this footnote.
**UPDATE January 8, 2015. The original link to the Phantom Burner 2.0 used when this blog was written is no longer working to obtain the Phantom Burner 2.0 and has been replaced this day with a link that is working to obtain the Phantom Burner 2.0 tryout download (phantomburner_setup.exe). This new link seems to be working to obtain the "Phantom Burner 2.0", but the Learn More and Purchase buttons for this choice do not work. Interestingly, the old and new links are from the same web site, just different pages of the web site. At this time, it is not known if this reflects problem with the PHANTOMbility.com web site or something else.

Bootcamp won't recognize windows 7 64 bit iso image

Hi,
I have a macbook pro 13.3 inch with retina.
Software OS X 10.9.4 (13E28)
I'm running Boot ROM Version: MBP111.0138.B07
I have windows 7 64 bit, as an iso image on my macbook pro. But for some reason when I run bootcamp I keep getting this error message.
Which doesn't make sense, because I know that I have the 64-bit version installed.
There was a forum that suggest changing one of the text files in applications > utilities > right clicking on bootcamp assistant > content > then changing the info.plist file.
It required me to add a line of text
<string>MacBookPro11,1</string>
I followed all the steps but then for some reason I was unable to start the bootcamp application, it would show an error.
Thanks

iso file is an image of an optical disc
any burner programs can burn as such to a dvd
bootcamp didn't have any problems installing from my windows 7 ultimate disc which contain both 64bit and 32bit install

Can't burn .ISO image with k3b/brasero on DVD-RW disc.

I don't understand what's going wrong here, so I hope someone can help me.
I have created an .ISO image (of a video) using DVDstyler.
(1) DVDstyler will burn it to a DVD-RW without any problems.
(2) I can burn it from the command line (growisofs etc.)
(3) I can burn it to a DVD-R from any application (DVDstyler, K3b, Brasero)
K3B and Brasero will write data to a DVD-RW any without problems
But, when I try to burn the dvd.iso to a DVD-RW disc with either k3b or Brasero, they fail with various error messages.
For example, K3B's debugging output is as follows
Devices
TSSTcorp DVD-ROM TS-H352C DE06 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
_NEC DVD_RW ND-4550A 1.09 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
K3b Version: 2.0.2
KDE Version: 4.7.3 (4.7.3)
QT Version: 4.7.4
Kernel: 3.1.2-1-ARCH
Used versions
cdrecord: 3.1a06
cdrecord
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (i686-pc-linux-gnu) Copyright (C) 1995-2011 Joerg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-4550A '
Revision : '1.09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW restricted overwrite
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1769472 = 1728 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Data does not fit on current disk.
Track 01: data 1854 MB
Total size: 1854 MB = 949353 sectors
Current Secsize: 2048
Trying to clear drive status.
WARNING: Phys disk size 65264 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 261871
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 65264 Blocks current: 65264 Blocks remaining: -884089
cdrecord command:
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=2 -sao -data -tsize=949353s -
I hope this is enough to give some clues. BTW, I have tried forcing a re-format on the disc first from within the application, which reports success. It all used to work some months ago, but since I do not do this regularly, I can't identify exactly when the problem started.
I would really appreciate some guidance.
Many thanks in advance

He already stated thet he is re-formated teh disk
@myrlin
as far as i can see, problem is with
cdrecord: Data does not fit on current disk.
try to reduce data for burning.
Aslo check that your user belongs to optical group aka "id USER"
Last edited by cybertorture (2011-11-30 18:13:28)

IPod hard drive and ISO image files

Every time I try to copy an ISO image file to the hard drive partition of my iPod, Windows tells me that the destination is full. This is not true, since my iPod has 23.5 GB of space left. Does anyone know why this might be, or have any way around it?
EDIT: This has not been a problem with ISO images smaller than 1GB, just in case this is a factor in the solving of this problem.
Custom Built (by me) Windows XP AMD Athlon 64 3200+, ASUS 128MB AGP Graphics Card

Yes, it will. But if DU says the disk is unformatted then it is also not accessible. If you have files you don't wish to lose then you will need to try recovery software:
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Bluray ISO image not readable

Hi all,
If I ask your help today it's because I face a very strange problem with my Bluray ISO disks generated with Adobe Encore CS5.
I explain the problem :
I have generated my personal video (720x1280) with Adobe Premiere Pro CS5
I have created the menu of my bluray with Adobe Encore CS5
Then, I've generated the ISO with Adobe Encore CS5.
The ISO image makes 5,80Go
The problem is, when I mount the ISO image of the Bluray disk with Daemon Tool Lite v4.41.3.0173, the disk can't be read:
With Windows Media Player: Windows Media Player can not play the DVD. Due to its special design, it is not supported by the reader.
With VLC v1.1.11: Your media entrance can be opened: VLC can not open 'dvd: / / H: \. "Check messages for more details.
With Cyberlink PowerDVD9: The disc format in the H: drive is not supported
With Cyberlink PowerDVD11: The disc format in the H: drive is not supported
With TotalMedia theater 5: This disc can not be read
I'm using Windows Seven 64 bits
However, if I burn the bluray ISO image on a real bluray disc, I can read the disc on My PC and my PS3 with:
PowerDVD9
TotalMedia theater 5
and on my PlayStation3
The bluray disc burned can't be read with VLC nor Windows Media Payer nor PowerDVD11
Please, can you help me to understand this problem ?
This are my personal life videos, so I would like to solve this problem in order to save these precious moments.
Regards,
littlesquall

Hi all,
thanks for your answers.
@John T Smith:
What's the solution ?
With http://forums.adobe.com/thread/890691?tstart=0
I haven't tried to generate a folder with Encore but only ISO files.
I will try this solution.
But if I burn the ISO image (5,80Go) with LG Burning Tool, the image is readable on my PC and PS3.
I have tried to make an ISO file from the BD-RE burned, but the new ISO file makes 23Go I don't know why...
With http://forums.adobe.com/thread/890691?tstart=0
My Bluray disc generated makes 5,80Go, so it's not a problem with a too big project.
@Ann Bens:
I've tried with Virtual Clone Drive
Now, I can read the ISO image with Cyberlink PowerDVD9 and TotalMedia theater 5.
The ISO file doesn't work with VLC, PowerDVD11, nor Windows Media Player.
It's better with Virtual Clone Drive but it's not perfect.
I would like to understand, is it a problem concerning the image generated by Encore CS5, or a problem with the soft used to mount the ISO images ?
I save all my personal videos on ISO files, so I would like to understand concretly what the problem is, to be abble to read the ISO in the future...
Thanks for helping me
littlesquall

How do I burn CDs of the Solaris 9 ISO Images

Hello All!
I have downloaded the Solaris 9 (SPARC) ISO Images, from sun.com. Now the issue is how do I use them, i.e. burn them on a CDR. First I have unzipped the images using WinZIP, and then used the ISO Buster to unpack the image files. But when I do that, I get only a few hundred kilobytes, whereas the ISO image itself are of 637 MBs.

I don't know if it is help You, because i am in a the same phase as You, but i have had similar problem, whan i used the Windows download software for TAR-s, You must use Sun Download Manager or the other certified SW or download (if it is possible) from machine, where is Solasis installed. SDM is able unzip the image into .iso file. I am afraid, that in .zip files are some sequences of data (bytes or bits) unsupported on Windows, who confuses the programs.

Burnt ISO image not recognised by Windows Vista

Can somebody please help me with my ISO problem.
I have some windows software stored as an ISO file. I've burnt the file to a DVD using Magic ISO and according to magic ISO the burn completed fine. If I then view the contents of the DVD using OS X then it looks as I'd expect, as a DVD containing windows software including the autorun file.
However whenever I boot up my virtual Windows Vista maching via Parallels desktop and then insert the disk, Vista informs me that the disk is blank and if I view the contents of the DVD using windows explorer then again the disk is Blank.
I've tried burning the ISO image 3 times, twice with Magic ISO and once with some free ISO shareware (I forget the name) each time the burn is successful and OS X recognises it but Windows thinks the DVD is blank. I've also tried the disk on a friends PC running XP and the disk appears blank there also.
This problem is driving me crazy, any help would be much appreciated.
Thanks

Good morning,
What type of disc are you trying to burn, data or movie?
If you already have an ISO you might consider using Disk Utility to make your DVD, it has rarely failed me! You can do this by going to Macintosh HD -> Applications -> Utilities -> Disk Utility, drag and drop the ISO onto a blank area of the left hand panel and then select the image and 'Burn' from the top left icon.
Hope this helps! 
David

Iso image not wanting to mount

is anyone else having problems getting a iso image to mount and burn in disc utility. I am trying to burn a linux distro. It kicks back with a error saying unable to mount

I'd try mounting a different ISO file. A file can get damaged during the download, or even during it's creation. If you have a problem with more than one file, then maybe you have a system or user problem that can be addressed.
Maybe if you provide a link to the distro someone will download it and check the file and see if it burns. Every file is different.

How to create an ISO Image file

Hi guys,
I was hired to create a system for a company and as an optional feature they would like the application to have an ISO Image maker. Meaning that the application will be able to get some files and package as an ISO so this can be burned directly to CD. Well, my problem so far is that I haven't found anything about this topic. Has anyone tried to do that? Or where can I find the specifications for the ISO image file so I can atleast try and implement it. Any help would be largely appreciated!!!! It's surprising that Sun doesn't have a class for that...unless I'm wrong and there is such a thing!!! Thanks in advance.

An ISO file consists mostly of binary data - so if it does not make sense to you then I hope that means you do understand the language that I'm talking with here =P
API in C++ for softwares like Nero and for a task like CD image creation is not surprising at all - I bet that the CDEverywhere only uses Java for creating the UI (User Interface). You can easily use the Nero API in 2 ways:
1) Use System.exec(cmd) to call some command line utilities to perform the image creation task.
2) Write some connecting codes in C++ to utilise the Nero API such that you may link those up with Java via JNI (Java Native Interface)
Last but not the least - the reason why many of us thinks that Java is not the right tool for CD creation is because the language is designed for platform-independence. But with the current hardware and software abstraction layers to access these removable storage data it would be rather challenging not implement a set of Java API that would work on most platforms.
I hope I do sound convincing here~

Is there a way to download Yosemite ISO image?

I already have 10.10.2 installed and running on my MacBook Pro (2008 4,1). However, I would like to reinstall/refresh Yosemite (--but not a 'clean' reinstall that wipes everything). Whether from the App Store or the Recovery Partition, the reinstall/refresh process never completes, even leaving computer alone for 24+ hours. Is there a way to download a Yosemite ISO image? (My disk and permissions are okay, and there are no diagnostic problems. It's just that I have installed/uninstalled so much other stuff that, at this point, I would like to refresh all system files/apps.)

You can make a bootable USB stick to install using this free program. It does all the work for you.
Bootable USB Flash Drive – Diskmaker X

ISO Image for DVD

Hi,
Kindly provide me ISO Image of windows 7 professional 64 bit OS.
So i can download this boot-able ISO image and burn DVD.
Regards,
Jatin Rathod

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to
follow it up. You can also choose to unmark the answer as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members
facing similar problems.
Thanks!
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

ISO Image Problem

Similar Messages

Maybe you are looking for