ISO unit EA cannot be converted unambiguously to an SAP unit for E1KONP

Hi,
I am facing issue with unit of measure while posting idoc in inbound processing( BD20) it is throughing the error message is of status 51 " ISO unit EA cannot be converted unambiguously to an SAP unit for E1KONP " .
pls help to resolve the issue
Regards,
Naveen

My guess is that the conversion factors for the unit EA are missing or maintained incorrectly. They are probably in material master (MM03). Or some unnecessary field is filled in in the IDoc.
Also check if there is a long text for the message - sometimes it helps.

Similar Messages

Units of different dimensions cannot be converted

i use storage capacity planning but i have an errors when loading resource location 2400, 2500, 2300 like this :
Units of different dimensions cannot be converted
however some other resource location(1000,3800) is still OK
please tell me how to solve this errors.
thanks so much!

It usually happen when there is an unit on the resource different from the one on product master and no conversion factor for
both.
Check this in your data.
Regards,
Michel Bohn

Field UMSA1 cannot be converted in type CURR - long Text

Hi All,
I am getting the following error
Error records written to application log
Error in an arithmetic operation in record 489
Record 489:Contents 四川省长江滥曝扇备总 from field UMSA1 cannot
Record 489 :Contents 四川省长江滥曝扇备总 from field UMSA1 cannot be converted in type CURR ->lo
This happened for the customized master data Z********(customer number). Data source; 0CUSTOMER_ATTR
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
Out of 5 data packages, I could find only 3 data packages in PSA which are successful, the remaining had error and could not be found in PSA. Checked in R/3 but could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
The UMSA1 field in data source 0CUSTOMER_ATTR in BW.
Data Type: CURR, Length: 15, Decimal: 2, curr/unit: UWAER
The UMSA1 field in R/3
Data Type: CURR, Length: 15, Decimal: 2
Request your timely suggestions.
Raj

Dear Veerandra,
I have already checked in R/3 as you had mentioned. But as I said earlier, could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
3. Error Handling option.
Regards.
Raj

Cannot be converted in type DEC,CURR - longtext

Dear,
When we are loading the data to the targets, we are getting the errors in the Transfer rules like mentioned bellow
Info source 0EC_CS_1 (Transaction Data for Consolidation)
Status (tab) :
Technical : Collection in source system ended
Processing Step : Processing End
Details (tab):
Processing end : Errors occurred
Error records written to application log
Error in an arithmetic operation in record 1
Record 1 :Contents 00 0.0000000 from field PCNT1 cannot be converted in type DEC ->longtext
Info source 0CO_OM_CCA_9 (Cost Centers: Actual Costs with Delta E)
Record 39952:Contents 048624.95- 1 from field SWF cannot be converted in type CURR ->longtext
Kindly help.
Thanks & Regards,
Kiran A
Edited by: Kiran A on Mar 21, 2010 10:23 AM
Edited by: Kiran A on Mar 21, 2010 11:36 AM

Hi,
It is sure some where in transferrules the mapping wasdone wrongly , like char --char of info object but in ur case some where data element is not same for field and info object.
check throughly transfer rules correctly field level and infoobject mapping and activate.
it is some where currency and unit fields the difference is there for data elements
Thanks&Regards,
Sathish
Edited by: sathish kakumudi on Mar 21, 2010 4:01 PM

Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

*UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
*UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this...
After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
Problem: Syncing Palm Treo 755p calendar with Outlook 2007
Error Message (simplified):
HotSync session completed with messages on [date] [time]
HotSync session started on [date] [time], and completed in [0] seconds
Outlook Calendar synchronization completed with messages
Duration: [0] seconds
Outlook Calendar
The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
OLERR:14-0001
- Desktop overwrite HH Sync
Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
Open Outlook
Go to your default calendar, where your events are synced
In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
Open a ‘New Appointment’
Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
Make sure starting and ending date & time are the EXACT same
Select ‘Recurrence’ & choose your pattern
I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
Switch Calendar in hotsync back to "Synchronize"
Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
Post relates to: Treo 755p (Sprint)
Message Edited by akeaw3000 on 01-23-2009 04:11 AM
Message Edited by akeaw3000 on 01-23-2009 07:08 AM

hello,
if all of your data is on the phone you can change the sync action to handhled overwrites desktop
how to:
open palm desktop software
on the top left click on 'hotsync' and then 'custom'
on the calendar conduit
highlight it and click on 'change'
then choose 'handhled overwrites desktop'
hope this will help you
Post relates to: Palm TX

BAdI error : type of EXIT_REF1 cannot be converted to the type of EXIT_REF

Hi all,
The below was the posted earlier for BAdI. Ihave followed all the steps. And i have written the below code. Syntactically it is not showing any errors, but when i am activating i am getting error
like " The type of EXIT_REF1 cannot be converted to the type of EXIT_REF". where i am doing the mistake..??
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref. "" The type of EXIT_REF1 cannot be converted to the type of EXIT_REF"
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Thanks in advance
krupali.

Hi,
Both are of different types
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
Assiging one type another type is not allowed.
Rhea.

Receiver service ??? cannot be converted into an ALE logical system

Hi,
I am hoping for some help with an Idoc issue in XI version 3.0. The scenario is like this:
Flat file->File adapter->XI->Idoc adapter->R/3
I have configured a scenario in one system like this that works fine. But in the current system I am getting the error message "Receiver service ??? cannot be converted into an ALE logical system" from the Idoc adapter.
As it is XI 3.0, I have set the Agency and Scheme in the destination communication channel to <Service>, ALE#LS and in the destination party, I have created a alternative identifier <Service>, ALE#LS, SYSCLNT200.
I have configured an ALE logical system name in the SLD.
I have cleared the SLD cache in the integration builder.
The ALE logical system name was not in the SLD when the message first appeared, but I thought clearing the cache would fix that. I have not tried deleting the service and re creating it. That is my next step....if all else fails.
Not sure what else I haven't tried.
Can anyone offer any advice?

Thanks Sam Raju for the reply.
On your questions:
1. I checked IDX1 - port for the receiving R/3 is defined as SAPIR1_300 (port: SAPIR1 and Client: 300) and it is mapped to RFC destination of IR1300.
2. Checked RFC destination IR1300 - it is setup as R/3 connection and checked test connection and remote login and both are working fine
3. Checked IDX5 - did find one message (status is successful) corresponding to the file I am sending into R/3 and this entry is an Outbound entry.
Question: Should there be two entries here in IDX5 - one for inbound and the other for outbound?
May be I am doing something wrong here in setting up the interface mapping and endpoints. Anyway when I check the IDOCOutbound in the Soap Header, I see the following:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/exchange/MessageFormat/">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCNUM>0000000000008002</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>FLIGHT_SAVEREPLICA01</SAP:IDOCTYP>
<SAP:MESTYP>FLIGHT_SAVEREPLICA</SAP:MESTYP>
<SAP:SNDPOR>SAPBXI</SAP:SNDPOR>
<SAP:SNDPRN>PRISM</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:RCVPOR>SAPIR1</SAP:RCVPOR>
<SAP:RCVPRN>IR1CLNT300</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
</SAP:IDocOutbound>
Do you see anything wrong or missing here. SNDPOR is XI port, SNDPRN is the source partner (file) and RCV... information is all the receiving R/3.
I am suspecting that something is missing either here or in the endpoint setup.
Also, in the TechnicalRouting I have this:
- <SAP:address version="20">
<SAP:systemKey>IR1CLNT300</SAP:systemKey>
<SAP:endpointType>IDOC</SAP:endpointType>
<SAP:url>IDOC://SAPIR1?RFCDEST=IR1300&DOCREL=&VERSION=3&SAPREL=46C</SAP:url>
</SAP:address>
Any issues you see here in url?
Also, when I look on the XI server, I do not see these files deposited anywhere- so they are going somewhere (as the status in IDX5 is successful)!
Do I need to activate any queues or triggers anywhere.
Can you please offer advice and help us out.
Thanks again.
Srini
[email protected]

IDOC to abap proxy- Receiver Service Cannot be converted into ALE logical

Dear all,
I have idoc to abap proxy -
R3 to SRM scenario.
I am getting the error Receiver service cannot be converted to ale logical system.
I have check the receiver bs SRM_BS , adapter specific attributes ... im getting the logical system ( this is not the problem)
i am using receiver XI adapter
with XI 3.0 as protocol
and http destination with /sap/xi/engine?type = receiver
i can see the data in the moni of receiver SRM system but it shows a red flag
pls help

Hi kiran,
i have checked all the RFC destinations ... seems OK
problem is in SRM moni .. sender service and sender interface are not visible.
trace ::::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine/?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SR5</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCADMIN_SR5</Trace>
<Trace level="1" type="Timestamp">2008-06-01T16:27:03Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DD2FF717DAE395F186DF001560A1C7CB</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0003</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0003</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface SupplierPortalTradingPartner_CreateOrChange_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SR5</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCADMIN_SR5</Trace>
<Trace level="1" type="Timestamp">2008-06-01T16:27:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
- 
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<CX_ERROR href="#o3314" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o3314">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o3313" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
<PROGID>496</PROGID>
<CONTID>1564</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o3313">
- <CX_ROOT>
<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>496</PROGID>
<CONTID>1738</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_DYNAMIC_CHECK />
<CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
<AUTOMATIC_RETRY />
<CONTROLLER />
<NO_RETRY />
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
</CX_BBPX1_STD_MESSAGE_FAULT>
</cls:CX_BBPX1_STD_MESSAGE_FAULT>
</asx:heap>
</asx:abap>
</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
fault message says the sender is not having logical sys...but my sender sys is showing logical system in adapter specific attributes
pls help
points will be awarded

Error in Mail configuration - parameters cannot be converted.

Hello All,
I have configured the mail configuration in 4.6d as per the notes 455127, 99965.
but when i try to send the test mail i got the error
Cannot process message in node, parameters cannot be converted ...
Can any one please help me....
the trace in SCOT is as follows.
SO_OBJECT_SEND                      Recipient in queue flagged
SO_OBJECT_SEND                      Structure: SOSCO
SO_OBJECT_SEND                      Status written for this recipient
SO_OBJECT_SEND                      Structure: SOST
SO_OBJECT_SEND                      Queue updated
SO_OBJECT_SEND                      Status updated
SO_OBJECT_ID_FOR_SEND_GET           Object ID returned
SX_OBJECTS_SEND                     Document type: M. Send attribute class: 0. No. of recipients: 1
SX_OBJECTS_SEND                     Call of SX_PERFORM_RFCSEND with MAIL M RI-BEHEER
SO_CONVERTED_VERSIONS_GET           Versions returned
SX_PERFORM_RFCSEND                  Nicht unterstützte Formate: ALI OBJ OTF SCR URL
SX_OUTGOING_VERSION_BUILD           Read contents of document RAW35000000000132
SO_OBJECT_DATA_FOR_SEND_GET         Object transferred
SO_OBJECT_PREPARE_FOR_SEND          Object prepared for transmission
SX_SEND_DATA                        Structure: SXRECINFI1
SX_SEND_DATA                        Structure: SXEXTRECI1
SX_SEND_DATA                        Structure: SXPCKLSTI1
SX_SEND_DATA                        Structure: SXDOCCHGI1
SX_PERFORM_RFCSEND                  After call of function SX_OBJECT_RECEIVE Returncode: 8
SX_PERFORM_RFCSEND                  Structure: SXEXTRECI1
SX_GENERATE_NDR                     Cannot process message in node, parameters cannot be converted

Hi,
The following errors in the trace file:
After call of function SX_OBJECT_RECEIVE ReturnCode: 8
Cannot process message in node, parameters cannot be converted
So the problem is caused by incorrect IMG configuration:
The SX_OBJECT_RECEIVE Returncode: 8 error message is caused by an incorrectly entered path in the RFC IMG connection (SM59) or by not calling MLUNXSND via a script.
The problem is that the mailgw.ini file not being present in /usr/sap/<SID>/SYS/exe/run/mlunxsnd or the <system_directory>/SYS/profile directory. MLUNXSND will check these two directories for a file call exactly mailgw.ini. If MLUNXSND does not find the file the error above is displayed.
I would recommend that you create a shell script per OSS Note 99965 and set the GWCONFIG parameter to point to maligw.ini.
Michael

[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file

I am running the TemperatureSensor project from lesson 2
I can detect the BMP180
pi@raspberrypi ~/javame81ea/bin $ sudo i2cdetect -y 1
     0 1 2 3 4 5 6 7 8 9 a b c d e f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
I can retrieve the I2CDeviceConfig info
Controller Name:   null
Controller Number: 1
Address:           0x77
Address Size:      7
Clock Frequency:   3400000
My API permissions are
jdk.dio.DeviceMgmtPermission "*:*" "open"
jdk.dio.i2cbus.I2CPermission "*:*"
But when I attempt
myDevice = DeviceManager.open(config);
I get
[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file
Any suggestions?

Hi Tom,
I stepped back and removed the BMP180 entirely. The UU remained.
Googling "raspberry pi UU" yielded
https://github.com/raspberrypi/linux/issues/581
which referenced
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=31420&p=612513#p612513
which referenced
https://www.hifiberry.com/forums/topic/i2cdetect/
which reccomended blacklisting snd_soc_wm8804
Googling "what is snd_soc_wm8804" yielded
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=81750
which explained the whole matter
Anyhow the UU is gone. Only 77 is detected now. The mystery continues which I accept as an interesting challenge.
Victor

Pblm in Converting BUOM to Batch specific unit of measure

Hi Gurus
I am Facing a Problem in converting the base unit of measure to batch specific unit of measure.
I have given BUOM in KG.Batch specific unit of measure is PC.
When i do GR for the material in KG with the average wt of the material in kg in the classification view
the system is increasing my GR KG to convert the material to PCS .
I dont want KG to be increased but the PCs to be rounded off to next integer.
How can i resolve this pblm??
NB:- All the settings are done correctly
and all the notes are applicable in ECC 604
Thanks and Regards
BS

Dear
Did you assing any Rounding value and Rouding Profile in MRP1-MM01 for this item ?? Do not maintained this option in MRP1 and check wether you have Kept rouing vadule against KG in CUNI ??
Basically , if you maintain the profile then it will rounds up to the next level based on the thresold valu as configuired in your case in Rouidng Profile in OWD1 .
Also check in MM-Purcahsing -Order Optimisation -Unit of Measure of Rounding rules for purchased item .This based on the control of optimisation of qty.
Hope it helps
Regards
JH

Convert the all the quantity units into one Unit of measure that is 'CSE'.

Hi all,
I want to convert the all the quantity units into one Unit of measure that is 'CSE'.
would anybody tell me what is the FM that converts all the quantity units into one Unit.
Thanks in advance,
Mythily

Hi Mythily,
You can check the following function module - -
FCO_CONVERT_FROM_BASE_UNIT
MD_CONVERT_MATERIAL_UNIT
MS_CONVERT_UNIT_TO_TIME
RV_CONDITION_CONVERT_UNITS
VHUMISC_CONVERT_TO_ALTERN_UNIT
VHUMISC_CONVERT_TO_BASEUNIT
WALL_QUANTITY_CONVERT_UNIT
WALL_QUANTITY_CONVERT_UNIT_RND
WSTP_CONVERT_UNIT
Regards
Pinaki

"clip cannot be converted"

Getting this error message: "clip cannot be converted."
Why? Have been able to convert clips for slow-motion, reverse, etc., before.

What kind of clip?
Specifically,
1) right-click on the clip in the Event. Select Show in Finder.
2) Right-click on the clip in the finder. Select Open With...QuickTime Player
3) In QuickTime Player, click WINDOW/INSPECTOR
4) Tell us everything listed next to the word "Format:"

"Filename could not be converted because protected files cannot be converte

ok, why can't i burn an MP3 disc from the files i download from iTunes? When i try, i get the 'protected files cannot be converted' prompt. What setting do i have wrong that won't let me do this? any help? thanks.

ok, so i burned 2 songs to CD using the 'burn to audio cd' option you mention - but now i'm trying to go into the CD to pull the files out to make them into Mp3 format - except that inside of the CD are only two .cda (CD audio track) files for the two songs and each file is only 1kb. So...where are the songs? This is incredibly frustrating since I just purchased an MP3 auto stereo that I thought I could burn my iTunes songs onto (as MP3's) so I can listen to them in my car. The whole point was to put more content on a CD (using mp3). I guess not. ****, i can't even make the iTunes songs 'unprotectable' so I can convert them. I feel like I've made a big mistake with iTunes because of the litigous/proprietary BS.

File2idoc receiver service cannot be converted into ale/logical system

hi
i m working with file to idoc the file adapter is working fine bit\ut wen i checked in
sx_monitor i found the red flag and it shows the error
receiver service cannot be converted in to ale/logicalsystem

Go to the Business System / Service you have maintained for your File.
Double Click ,Business System --> Adapetr Specific Identifiers.
Here, maintain the Logical System name of the Sender System. This logical system name should be the value for which the partner profile
has been created in your SAP system in we20.
The same should also be maintained for your Receievr Business System.
Regards
Bhavesh

ISO unit EA cannot be converted unambiguously to an SAP unit for E1KONP

Similar Messages

Maybe you are looking for