ISPC control limit alignment

Hello,
I am using an iSPC chart and feeding in my own control limits. I have multiple (up to three) phases of control limit data, each with varying center lines, UCL and LCL's. I have two problems.
1) The control limits seem to be plotted before their corresponding point. By this I mean, the control limit's for a particular point are plotted in the space between that point and the previous point. I have included a link to a screen shot showing this. The point is circled in green and the control limit data for that point is also circled in green. What we would like is to have the point placed between the two tick parks, and the control limit lines centered between the ticks. Another way to look at it is the point would be centered above/below the corresponding control limit dash.
2) There appears to be no control limits on the chart for our first point, 12/31/2007. I have circled this in red.
Here is the link for the chart,
http://img59.imageshack.us/img59/3807/screenshots.jpg
Here is the link for the data,
http://img524.imageshack.us/img524/9678/screenshot2sa.jpg
Please ask any questions you may have.
Thank You for any help.

Nick,
Are you using the Auto-Calculate control limits since the posted dataset has NA set for the values which would be why they are not plotting? What is your subgroup size set to for the chart?
I know that in the next SP for v12.0, SPS 9, there is a newly added field around the centering a lines and control limit plotting. The field is a checkbox located in the General tab and is called "Center Control Limit Lines on Points" in order to resolve a similar issue.
Regards,
Sam

Similar Messages

SPC Chart - show target and one control limit

Hi,
Wondering is it possible on the iSPC chart to show a target and only one of the two control limits - i.e. show the user target and the upper control limits - hide the lower control limit. Doesn't seem to be possible via code etc. option seems to be show both or none ?
Regards,
Emmett

Mike,
Some interesting reading, but ultimately no joy in what i am trying to achieve - i maually set my scales to Max 100 Min 0, My CL to 50 and my UCL to 70 and my LCL to -50 in the hope that the LCL wont be visible , but the chart seems to default to make the user aware that an LCL exists and presents the LCL along the zero scale even though this is not in effect were it will become active. Anyone know of a way around it, is there a single control limit that when the chart value exceeds this limit an alarm will become active but not when it drops below it, all limits seem to be in pairs ?
Thanks,
Emmett

Control/Limit web access

I am curious if I can use our 10.5 Server (currently serving afp and ftp) to also control the users web surfing. Ideally down to 1 hour a day minus the approved websites we maintain.

You can't limit web browsing to a time limit using 10.5 server, but you can limit the websites that users can visit. There is the capability to create white-lists and black-lists. I'm currently in the process of working with Apple in order to import our current 'hosts' file into workgroup manager's black-list preferences. Apparently the preferences are accessed using dscl from terminal...which really is not fun to tinker with. If I find a way to import sites into the black-list and/or white-list, I will post it. If anyone needs a really good hosts file that goes in the /etc/ folder to block most **** sites/proxies/crap, let me know and I can e-mail it to them.

SSRS Report Viewer Control Parameter alignment

I am having problem aligning parameters in ssrs report viewer control ,is there any way i can control the display of the parameters in left side alignment or right side alignment. please see the below pic for more details.
I am using vs.net 2012 and sql server 2012 and calling this server report in a asp.net page using report viewer control and report viewer process mode is "Remote"
http://social.msdn.microsoft.com/Forums/getfile/514664

Hi siva9000,
In Reporting Services, we cannot customize the parameter pane like the ways you have mentioned above. We can refer to the following link, vote it is as important and hope Microsoft improve this feature in the next service pack or product release. Allow
SSRS Parameter Panel to be formatted:
https://connect.microsoft.com/SQLServer/feedback/details/545893/allow-ssrs-parameter-panel-to-be-formatted
In addition, as Olaf suggested, we can hide the parameter prompt area, then create a custom parameter prompt area in the web page to achieve the goal. Please refer to the following blog:
http://www.mssqltips.com/sqlservertip/1751/custom-control-and-setup-of-ssrs-report-parameters-from-a-web-page/
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Control horizontal alignment of table cell?

Is it possible to control the horizontal alignment of text within a table cell using some form of xsl:attribute code? I wasn't able to find any alignment attributes supported in the user guide and was hoping there was a way to manage it- the problem is that I don't know ahead of time which cells need to be left justified and which ones need to be centered.
Thanks,
Kevin

I've tried the following in the
advanced properties but with no success.
<?if:number(EMPID)>6?>
<xsl:attribute
xdofo:ctx="block" name="text-align">center
</xsl:attribute>
<?end if?>
Change the attribute to the following and the formatting works.
<?if:number(EMPID)>6?>
<xsl:attribute
xdofo:ctx="block" name="background-color">red
</xsl:attribute>
<?end if?>
I'm previewing in PDF.
If anyone has any ideas they would be greatly appreciated.
Thankyou
John.

How to Control Width / Align rightmost edge of sub regions on a page ?

Hi folks
Am Apex newbie using Oracle XE and 4.0.1 Apex to develop app on laptop before deploying to production.
I have a page with region display selector and multiple sub-regions.
Am using Theme as per the Issue Tracker packaged application.
Problem is that my subregions on page align on left hand side but the subregions widths are different ... therefore page looks a bit scrappy / unprofessional as regions look a bit like
XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Is there any way to control / make the subregions widths the same so that screen looks better.
Have spent ages moving individual fields on page to try and force sizes to match but with no luck .. so any help would be gratefully received as always.
Thanks

Hi-
I was trying to align sub-regions side-by-side, I followed what Patrick suggested to put the following in the region's sub-region template.
<div> #SUB_REGION# </div>then to be enable to put the subs side-by-side I had to put the following in the regions attributes.
width: 300px; float: left
that would align the subs side-by-side, I tried to change the template so I can use the attributes
<div#REGION_ATTRIBUTES#> #SUB_REGION# </div>but when I ran the page I can see the following in the Firebug.
<div #region_attributes#="">so no effect, am I missing something or what.
Regards,
Omar

Input Control Limit

Hi,
Is there any limit on the number of lines (entries/values) which an Input Control can display? I am having an Object which has over 2000 values but I am not able to see all the values in Input Control. It just stops at some number.
I changed the settings - 'Number of lines' but that too is not affecting the report. Universe Parameters Control settings are all unticked, so no restriction there.
Is there any setting for input control on server or CMC?
Edited by: dacoffee on Nov 2, 2011 11:09 AM

Please try the below steps i got from BOB.
Hope this helps...
To increase the limit, from the default of 1000, do the following:
[1] In the CMC, go to the Properties screen for the WebIProcessingServer server(s).
[2] Modify the "List Of Values Batch Size (entries):" setting. The default is 1000. You can specify a value between 1000 and 65535 inclusive.
[3] Restart the WebIProcessingServer server(s).
[4] Restart the "AnalyticalReporting" web application, or, restart Tomcat if you are unsure how to restart individual applications.
The change should now take effect when working with Input Controls in the InfoView WebI Viewer and WebI Java Applet.
If you need to modify the LOV limit in WebI Rich Client, work through the following steps.
[1] Open the webi_client_default_parameters.xml file in a text editor, such as notepad. The default location for the file, on windows, is as follows:
<drive>:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\config\webi_client_default_parameters.xml
[2] Modify the following parameter:
Code:
<PARAMETER NAME="WebiParamListOfValuesBatchSize" VALUE="1000" TYPE="long" ADMIN="true" />
Modify the VALUE from the default of 1000.
[3] Save the file.
[4] Restart the WebI Rich Client
http://www.forumtopics.com/busobj/viewtopic.php?p=755449
Regards,
Bilahari M

H:panelgrid help to control width, alignment of TD etc in JSF

Hi
I am new to JSF. Just started to crawl in the technology. I have html table like this,
<TABLE BORDER="2" CELLSPACING="0" CELLPADDING="0">
<TR>
<TD WIDTH="226" HEIGHT="1" CLASS="lbgcolor">
<IMG SRC="null.gif" WIDTH="226" HEIGHT="1"></TD>
</TR>
<TR>
<TD ALIGN="CENTER" WIDTH="226" HEIGHT="87" CLASS="lbgcolor">
<IMG SRC="nnnn.gif" BORDER="0">
</TD>
</TR>
</TABLE>
I like to implement the same using core JSF tags and it looks like,
<h: panelGrid border="0" cellspacing="0" cellpadding="0" columns="1"
columnClasses="lbgcolor" >
<h:graphicImage value="null.gif" width="226" height="1"></h:graphicImage>
<h: panelGroup >
<h:graphicImage value="nnnn.gif" > </h:graphicImage>
</h: panelGroup>
</h: panelGrid>
1. Is this the way to do ?
2. I am not able to set width, alignment, height to TD using JSF core tags. Can anyone suggest how to do this ?
3. How to provide hyperlink on the image ?
Advance Thanks,
Regards,
Vetri.

1. basically.
2. use css
3. nest the graphic image in a commandLink/outputLink

Customer Credit control limit options Period and Value

Hi All,
Can any body suggest or help regarding my requirement.
I know the standard credit management process which is based on the credit limit Value which will be maintained in the FD32.
But My requirement is
-->Credit limit based on the period
-->Credit limit based on the value.
-->Credit limit based on the period and value.
1.If I activate credit limit based on the period,customer order should be blocked when the customer exceeds 15 days credit limit- is there any standard option on this
2.If I activate Credit limit based on the value,customer order should be blocked when the customer exceeds credit limit value which is maintained in FD32.
3.If I activate Credit limit based on the period and value,customer order should be blocked when the customer exceeds credit limit period and value.
Is this possible in the standard credit management !
or this is possible only through workaround
Provide me the document if available
Regards,
Murali.

Hi all,
In addition to previous requirement.
We also need to take consideration under scenario also.
For example
One customer taken the goods from 1st to 15th, actually he has to pay the credit amount on or before 30th if he is not able to pay on 30th system should block the further sales orders(i.e. from next month 1st onwards).
is this option available in he standard !
Can any body help on this ASAP.
Regards,
Murali.

Cfchart upper control limit

I have a chart I'd like to add a static horizontal line to.
This is an example of the chart with a red line I added manually in Photoshop. It's the red line I want to show on the real chart.
Is this possible?
Thanks

AirPort Utility is the only way to configure your Apple base station. You would need to enable MAC address filtering and add/remove the iPod touch's MAC address as appropriate.

Control chart limit calculation not being done

Hi
I have maintained MIC, sampling procedure and Insp plan for a char and have made two lots with them. Though charts are being displayed correctly, control limit calculation is not being possible. Msg is "Control limits for track 1 could not be calculated".
What customization should be made for this?
And in QGC1/2/3, only one insp lot is there, what went wrong?

Dear Gajesh,
I tried with status 3. When i remove lot created start date, it shows me the fist lot with which we statred SPC in SAP. But If i put any specified start date, it returns no value. Does that mean with status 3 it will show the very 1st lot with which SPC usage started? Then what are the cases for status 1 and 5?
My sampling procedure setting is:
sampling type: Fixed sample
Valuation mode: SPC inspection
W/O inspection point
Sample size: 1
Chart type:115 Shewhart chart for X bar/USA
Inspection plan setting is:
SPC criterion : 020 task list char/materia
Base qty : 1KG
Thanks!

How to align fields in Webdynpro ?

Hi,
How fields can be aligned as per user need in Webdynpro? I mean, say a table has been defined and user need the table to be displayed in the center of the screen....How can we achieve this???
Completely new to Webdynpro !!!!!
Regards,
ABAPer007

Hello,
you need to define the fields in the layout..
the properies of that field layout, can control your alignment of the layout
for more info
Check these.
Align Fields or Label in Webdynpro
/message/5412013#5412013 [original link is broken]
hope it is useful to you.
Regards!

Problems With Data Alignment when spooling to a CSV file

Dear members,
I am spooling data to a csv file. My data contains 3 columns
For example :
col1 col2 col3
USD,10000033020000000000000,-1144206.34
The 2nd column is alphanumeric, it contains some rows which have only numbers and some which have numbers and alphabets.
The 3rd column contains only numbers with positive or negative values.
I am facing problem with alignment. when i open the spooled csv file then i find that the 3rd column is aligned to right .
In the 2nd column, rows which have only numbers are right justified and rows which have alpha numeric data are left justified.
I tried using the JUSTIFY function in sql plus but still it is not working for me.
Can any body give your opinion on how to control the alignment in spooled csv files.
Your responce is highly appreciated.
Here is my code :
WHENEVER SQLERROR CONTINUE
SET TIMING off
set feedback off
set heading off
set termout OFF
set pagesize 0
set linesize 200
set verify off
set trimspool ON
SET NEWPAGE NONE
col to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ALIAS CONCATENATED_SEGMENTS
col CONCATENATED_SEGMENTS justify left
col to_char(decode(glbal.currency_code,glsob.currency_code,
(begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq))) alias Total_Functional_Currency
col Total_Functional_Currency justify left
COlUMN V_INSTANCE NEW_VALUE V_inst noprint
select trim(lower(instance_name)) V_INSTANCE
from v$instance;
column clogname new_value logname
select '/d01/oracle/'|| '&&V_inst' ||'out/outbound/KEMET_BALANCE_FILE_EXTRACT' clogname from dual;
spool &&logname..csv
SELECT glsob.currency_code ||','||
to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ||','||
to_char(decode(glbal.currency_code,glsob.currency_code,
(begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)))
from gl_balances glbal , gl_code_combinations glcd , gl_sets_of_books glsob
where      period_name = '&1' /* Period Name */
and      glbal.translated_flag IS NULL
and      glbal.code_combination_id = glcd.code_combination_id
and      glbal.set_of_books_id = glsob.set_of_books_id
and      glbal.actual_flag = 'A'
and      glsob.short_name in ('KEC-BOOKS' , 'KUE' , 'KEU','KEMS', 'KEAL' , 'KEAL-TW' , 'KEAL-SZ' , 'KEAM')
and glcd.segment1 != '05'
and decode(glbal.currency_code , glsob.currency_code , (begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr) ,
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)) != 0
and glbal.template_id IS NULL
ORDER BY glcd.segment1 || glcd.segment2 || glcd.segment3 || glcd.segment4 || glcd.segment5 || glcd.segment6
spool off
SET TIMING on
set termout on
set feedback on
set heading on
set pagesize 35
set linesize 100
set echo on
set verify on
Thanks
Sandeep

i think you do not have to worry about your code when you say that the plain texts created are ok when opened on the notepad. it is on the excel that you will need some adjustments. not sure about this but you might want to read about the applying styles in the excel by going through it's help menu.

Implementing SPC/Control charts in Reporting Services/BI Solution

Hello All
I'm one of the BI specialists in our company - currently looking after our BI solution which incorporates SQL Server 2005, SSRS, SSIS, SSAS, Performance Point, Pro Clarity and various other bits and bobs etc.
What I'm aiming to do, is establish a suite of SPC/Control charts for our portal, based on the suite of cubes we already have. At the moment, I'm thinking of producing these in the SSRS environment, but I'm open to suggestions!
As a starting point, I've created the necessary charts in Excel (calculating averages, standard deviation, upper/lower control limit) etc, but now I'm looking at implementing it in our DWH.
Third party software may be an option (such as Dundas, which keeps cropping up in my crusades!) but I'd like to perhaps generate these myself - if I'm not asking too much that is!
Any advice greatly appreciated...
Cheers
Lee

Hi Lee,
Based on your descriptions, you want to implement Statistical Process Control(SPC) chart in SQL Server Reporting Services. If I have misunderstood, please do not hesitate to let me know.
By default, we only have Column, Line, Shape, Bar, Area, Range, Scatter, Polar charts in SQL Server Reporting Services. As a workaround, we can anaylze the data using SQL Server Analysis Services, and then use these chart to display the data in SQL Server Reporting Services. We can use parameters to filter data.
Third party software may be an option. However, if you want to implement these charts by yourself, we can implement a custom report item in SQL Server Reporting Services. We can start it from here: http://msdn.microsoft.com/en-us/library/ms345231.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

How to align text within an EditText?

Hello,
using this simple one as an example:
var w = new Window('dialog');
w.preferredSize = [200,100];
w.et = w.add('edittext', void 0, "Some text");
w.et.preferredSize.height = 40;
w.show();
The "Some text" is placed top-left in the EditText - is it possible to control its alignment, i.e. ['center', 'middle']?
(just to be clear, I'm not interested in the EditText position within the Window, but just the text within the EditText itself).
Thank you!
Davide Barranca
www.davidebarranca.com

Davide, use the below example with either left, center, or right. You have to have the justify line right after the line that creates the edittext box:
#target photoshop
var dlg = new Window('dialog','test')
dlg.txt = dlg.add('edittext',undefined,'this it the text');
dlg.txt.justify = 'center'
dlg.txt.size = [200,60]
dlg.show()

ISPC control limit alignment

Similar Messages

Maybe you are looking for