IsPDFFile() and CFPDF won't recognize a PDF

I have a PDF that I can open up in Adobe Acrobat Reader 8.0
without problems. However, if I use the CFPDF tag to action =
"read", I get the following error:
"Error: Invalid Document D:\temp\test.pdf specified for
source or directory. "
If I use the isPDFFile() with the same file, I get a return
of false.
The only way around this is using the <cffile
action="readBinary"... and using the <cfontent> tag.
I had this same problem on 8.0 on a version 1.2 document, but
installing 8.0.1 fixed it. This is a 1.3 document.
Here is a link to the file
test.pdf
Is this a bug in CF?

quote:
Originally posted by:
zbis12
On the counterfeit remark - please don't dig too much into
that.
This is a court document created by an attorney
using bankruptcy software and some word processor, printed it,
scanned it, ocr'd it, and submitted it to our system.
The copyright info you see in the margin is for the
bankruptcy software he uses.
Not being a lawyer I could not comment on copyrights. But I
will say that, given the number of steps involved, it certainly
seems like there is an opportunity for file corruption.
quote:
Originally posted by:
zbis12
On the personal information - This document is a matter of
public record and can be downloaded on the internet for a fee
(.08/page). You may also drive to Birmingham, AL and view it for
free in our reception area. Once you file Bankruptcy, your case
information becomes public.
I suspect you are 100% correct about it being public record.
That said, my personal approach falls in the "just because you can,
does not mean you should" category ;-) Even when I am not bound by
some sort of NDA, I try to not to disclose client related
information. IMO it is just good business sense, for both the
client and myself. Plus, it just shows some basic courtesy to all
parties involved. Something that is often in short supply these
days.
(My $0.02 for what is worth ;-)

Similar Messages

  • TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

    I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

    Same question Wish someone had replied!
    I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

  • I just downloaded IOS 6.1.2 and it won't recognize my password.  I have reset it on my Apple ID and it still says it's incorrect.

    I just downloaded IOS 6.1.2 on my iPhone 4  and it won't recognize my password.  I have reset it on my Apple ID and it still says it's incorrect.  What do I need to do?

    There are two more things to try. If the first thing you try fails, try the next.
    Two Button Reset.
    This is the least likely to result in loss of data.  Read that again, especially the phrase "least likley."
    Unplug the phone form the computer.
    Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
    When you see the logo, let both buttons go.
    If this worked, you should see an icon instructing you to connect to iTunes.  My guess is that the reset did not work.
    DFU Restore
    This will very likley result in loss of data.
    Plug the iPhone into the computer.
    Ensure that it is running the lates version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in covery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you 've never done a DFU, it may take about three attempts to get the timing right.

  • How do I get my music from Media center to my iphone. Itunes won't import the MC music library, and MC won't recognize and synch to the iphone so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    Hello and welcome to the support community
    As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5.

  • I just updated iBooks author and it won't recognize or open any of my .iba files.

    I just updated iBooks author and it won't recognize or open any of my .iba files.

    Have you tried basics from the manual?
    restart, reset, restore.

  • I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

    If your using the same cable for your wall charger as you are for your computer, than the problem is probably within the cable (if there isn't visible damage to the cable of coarse). The quockest solution would be to buy your self a new cable. There is probably nothing wrong with your wall adapter, so just the cable will do.

  • My iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    my iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    Turn it off by holding home+ power button untill the screen goes black ( as soon as it goes black, release the buttons).. This might take some practice , so dont worry if on the first try your phone reboots and goes to itunes screen again.
    Now, with your phone powered off, enter DFU mode:
    Method 1)
    Attach the phone to the pc
    Turn the phone off
    Hold power and home together for *exactly* 10 seconds
    Release power but keep holding home until the pc beeps as a USB device is recognized.
    Whilist in dfu mode, itunes will recognize the device and it will ask you if you wish to restore it. Simply click restore, and the restoring proces will begin.
    This will hopefully fix your iphone.
    Cheers

  • I change my password in my ipod about an hour but now i want to change it again and they won't recognize my old passwords. How do change my password without them asking for my old passwords? Also can i change it in iTunes?

    I changed my password in my iPod about an hour but now i want to change it again and it won't recognize my old password. How do I change my password without them asking for my old password? Also can i change my password from my iPod through iTunes?

    On the iPod did you go to Settings>Store and sign out and then sign in with the new password?

  • Rescue and Recovery won't recognize backup files.

    I have backup files on a usb drive, an ultrabay drive and the main hard drive and it won't recognize any of them. Anyone else have this problem? 
    -M 

    manusoft, welcome to the forum,
    attach the usb drive and then check it's recognised in BIOS. While you're in BIOS ensure that you optical drive is set as first boot device and place the boot disc you created in the optical drive. Save your settings and restart.
    The system will boot to the R&R on the disc and in theory you should be able to then install the image.
    Consideration; on the systems you move this image to the service partions will probably be no longer functional. I say probably as I've never done this with W7.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Ipod stuck in recovery, and iTunes won't recognize the device.

    My ipod is stuck on restore/ recovery mode, and iTunes won't recognize the device. The computer makes the beep noise saying that somethin is plugged in but itunes won't pick it up. It is iTunes 11.1.1 and i have a 5th generation Ipod touch. Any Help? Thanks (:

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar              

  • TS3540 iTunes and iPhoto won't recognize my iPhone when plugged into my mac.

    iTunes and iPhoto won't recognize my iPhone 4S, or my wife's iPhone 4 when pluged into my MAC.  I am running OSX v10.5.8, and both iPhones have the latest version of iOS.  I tried a few of the other trouble shooting tips from the community, but nothing seems to work.
    Any suggestions?  Thanks.
    -CoachJB54

    I tried that and iTunes and iPhoto still won't recognize the device.  Any other suggestions?
    Thanks.
    -CoachJB54

  • My iPhone 3s won't finish restoring and iTunes won't recognize it anymore.

    I woke up this morning and my iphone 3s was not working properly and I couldn't make or recieve calls or texts but everything else was working fine. Then I got a notification saying I had to restore it so I did, and it got all the way to the part where you reset the settings like the language and country but when it says "connect to iTunes" it stops working and iTunes won't recognize my phone anymore. It's not under warranty and I don't know if I can fix this myself or if Apple will still fix it for me. I also recently updated all my software so that shouldn't be the problem. Help!

    Hello Lehongdinh,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue of your iPhone not powering on, please follow the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

    I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
    OS X 10.10.1. 
    Safari Version 8.0 (10600.1.25.1)
    WiFi router connects with mail but not Safari

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • How do i fix my upgrade error ? iphone 4 won't turn on to reload and itunes won't recognize

    HELP! - I just tried to upgrade my iphone4 to iOS 5.1.1 and an error occured sometime thereafter. Now my phone is stuck in that initial (plug usb -----> itunes) graphic/picture thing you see when you turn your iphone on for ther very first time. I have windows vista, and to make matters worse, my itunes won't recognize my phone to finish 'the job'. ***?  PLEASE HELP SOMEONE WHO KNOWS!!

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    Device Not Recognised
    http://support.apple.com/kb/TS1538

  • My old mac and 3g won't recognize my iphone4s - and the new itunes on my pc won't recognize the 3g

    Hi, I'm having issues syncing my information from two separate computers to my new phone.
    I backed up my old iPhone 3g on my iBookG4. The G4 does not support the iPhone 4s because it's too old and I cannot update to Lion or Leopard because it's too old.
    I have a Dell that I bought in 2009 (i know i know, it was cheap and i had to get it for a class i was taking) - anywho, I have downloaded the new version of iTunes for the iPhone 4s and this version of iTunes won't recognize the 3g - I'm guessing because it is so outdated.
    So, I can't get the old computer to read the new phone or the new computer to read the old phone.
    What I attempted was home sharing with iTunes and that got all my music and apps, but contacts and calendars I can't move.
    Any suggestions??
    thanks.
    ps this mac is so old that the letter a just popped off the keyboard

    Syncing of devices running iOS4 and higher requires iTunes 9.x and higher.
    iOS 4.3 and higher requires iTunes 10.x or higher.
    Regardless, iTunes 9.x and 10.x require Windows XP Service Pack 3.
    Is your Windows system current with all Windows updates?

Maybe you are looking for

  • How do I use my iphone 6 in my 2013 BMW x5 for phone and music?

    How do I use my iphone 6 for calls and music. I want to use the auto speakers and display - hands free. MY 2013 BMW x5 has a usb port between the front seats and Bluetooth. Is it as simple as plug in, connect tp Bluetooth and use the iDrive functions

  • Human Workflow Issue in 11.1.1.6

    Hi Experts, I working on a Human Workflow Project in SOA Suite 11.1.1.6. My requirement is to pass the HTML data as content to Human Workflow Task to Notification user. Do elaborate more, the user will get email notification from Human Workflow where

  • INTEGRATION_DIRECTORY_HMI  404 problem, installation tips

    Hello, I installed NW04s with the PI option. I was going through the post installation configuration steps. When I configure the INTEGRATION_DIRECTORY_HMI RFC destination to the ABAP stack using connection type 'H' for HTTP I get a   "404   Not Found

  • Problems customizing the user template

    Hi, I'm trying to customize the user template on 2 laptops. I've done this before with no problems, but this time it doesn't appear to be working correctly. I'm using the following command cp -R /Users/TEMPLATE/* /System/Library/User\ Template/Englis

  • HT1331 Please help Windows user find disk on network...I'm stumped

    I'm running Windows Vista and Windows 7 on another PC. Neither can even connect with the AIrPort Extreme by typing 10.0.1.1 in my browser. It shows up fine with AirPort Utility, it's IP is in fact 10.0.1.1. Internet works, file sharing from PC to PC