ISQL*Plus Failed ta start the service, Error:0
Hello there,
I setup Oracle 10g for window 2003. When to Configuration Assistans then show table error : Failed ta start the service, Error:0, The operation completed successfully.
In the Event Viewer i can see the following:
The description for Event ID ( 15 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1460, This operation returned because the timeout period expired.
, 4.
I set the Path variable C:\oracle\SOL\102\bin and the ORACLE_HOME to:
C:\oracle\SOL\102
But it did not solve the problem.
I installed only Windows 2003 Enterprise Server with Service Pack 2
when i use this command isqlplusctl start at command prompt the message appears:
Failed ta start the service, Error:0, The operation completed successfully.
please can you help here?
I forgot.
I installed JAVA SDK 1.4.2_09 too
But when i uninstall it the same error appears...
But i think Oracle do run with 1.4.2_09 or not?
Similar Messages
-
Tip regarding the "systemd[1]: Failed to start Journal Service" error
Just a tip regarding the well-known
systemd[1]: Failed to start Journal Service
error (which I ran into last weekend) to maybe save one or two among you a couple of hours of your time:
The error is described here https://bbs.archlinux.org/viewtopic.php?id=151012 as well as in several other threads in other language boards / in other forums etc. It is usually (as in the linked thread) 'solved' by reinstalling the system - good old Windows magic, also useful when dealing with systemd.
The Problem with this error is that you do not get into your system. Instead, systemd will print you the mentioned "Failed to start Journal Service" error message a couple of million times. There are also no logs that you could retrieve (when booting from a livesystem) and that would give you any helpful hints, since journal is systemd's logging service, old-style system logs are not kept, and the dmesg log doesn't survive the reboot with default settings.
As pointed out in the above mentioned thread, you will see a few more instructive error messages when adding 'emergency' to the kernel line in the bootloader config.
Now there may be plenty of reasons why the systemd journal service might not work. The most common and most annoying, however, appears to be this one:
In this case you will see that the problem actually lies in
systemd[1]: Cannot open /etc/machine-id: No such file or directory
Now, 'man machine-id' reveals that "the /etc/machine-id file contains the unique machine id of the local system that is set during installation. (...) The machine ID is usually generated from a random source (...)". It is obviously perfectly justified to refuse to boot the system because an absolutely insignificant random number is missing. As far as systemd is concerned anyway.
Usually, it seems, the /etc/machine-id is set by /usr/bin/systemd-machine-id-setup during installation or system upgrade. It is not documented anywhere that this is a rather important step and that you should better check if this was or was not actually done before rebooting. Obviously (but for no apparent reasons) systemd fails to run this (or to run this successfully) sometimes.
Also to be recommended: Always retain (back up) your old kernel and initramfs and edit your bootloader config appropriately to be able to boot with your old kernel again ... just to have one or two options left to get back into the system in case of running into an unpleasant surprise from the side of systemd or other packages.
The solution is, obviously, to create this file /etc/machine-id ... You probably want to do that from a livesystem (if you want to try it from the emergency shell, you would need to remount / (i.e. root) as rw and hope that systemd will not punish you for that) by just running the program that was designed for creating this file manually: /usr/bin/systemd-machine-id-setup
http://permalink.gmane.org/gmane.comp.s … devel/7528 states that it might also work with merely creating the file 'touch /etc/machine-id'. Though I didn't try that since I had enough fun with systemd for one week and didn't want to break my system again just to see if that works.Jristz wrote:
ackalker wrote:Sorry for necrobumping this.
Generating the machine-id in a consistent way is very important when working with KVM and containers, where the machine-id can be set for the VM or container. See `man systemd-machine-id-setup`.
Again, _don't_ just put some random UUID in there, especially not in the systemd package install script, this makes provisioning Arch Linux containers a PITA.
If you thing that the way that arch is handlynbg the machine-id is wrong or can be improved, then file a bug.
He already did.
Jristz wrote:Anyway, I thing if reinstalling systemd package or if systemd have a command to reinitialize the machine-id file.
Like so many of your posts, I had to read this a half dozen times before it made any sense. I think you're hinting at the utility that ackalker already pointed out in the post you're replying to. And, if you read the install scriptlet, you wouldn't need to think about whether or not reinstalling would be an option. You would know that it isn't. -
Failed to start TAF service on standby db
Hi, we have a DG configuration based Oracle RAC 10g R2 (2 nodes). After switchover to standby db and start the TAF service, I got the following errors:
PRKP-1030 : Failed to start the service appTAF.
CRS-1007: Failed after successful dependency consideration
CRS-0223: Resource 'ora.standby.appTAF.cs' has placement error.
So basically TAF service won't start. Does anyone see this error before?
Thanks in advance.The interesting part is that there is no error in the alert log.
-
Systemd logind.service reports an error: Failed to start login service
Hello,
I found this error in /var/log/errors.log and /var/log/daemon.log although my system functions normally.
It's been written there every 90 seconds!!!!:
Dec 19 23:52:59 localhost systemd[1]: Failed to start Login Service.
Dec 19 23:54:29 localhost systemd[1]: Failed to start Login Service.
Dec 19 23:55:59 localhost systemd[1]: Failed to start Login Service.
Dec 19 23:57:29 localhost systemd[1]: Failed to start Login Service.
Dec 19 23:58:59 localhost systemd[1]: Failed to start Login Service.
the process: systemd-logind.service seems to be working fine:
[xxx@archbox ~]$ sudo systemctl status systemd-logind.service
[sudo] password for xxx:
systemd-logind.service - Login Service
Loaded: loaded (/usr/lib/systemd/system/systemd-logind.service; static)
Active: activating (start) since Wed, 2012-12-19 23:49:59 CET; 49s ago
Docs: man:systemd-logind.service(8)
man:logind.conf(5)
http://www.freedesktop.org/wiki/Software/systemd/multiseat
Main PID: 11822 (systemd-logind)
CGroup: name=systemd:/system/systemd-logind.service
└─11822 /usr/lib/systemd/systemd-logind
Dec 19 23:49:59 archbox systemd[1]: Starting Login Service...
Dec 19 23:49:59 archbox systemd-logind[11822]: New seat seat0.
Dec 19 23:49:59 archbox systemd-logind[11822]: Watching system buttons on /dev/input/event6 (P...on)
Dec 19 23:49:59 archbox systemd-logind[11822]: Watching system buttons on /dev/input/event7 (V...us)
Dec 19 23:49:59 archbox systemd-logind[11822]: Watching system buttons on /dev/input/event4 (L...ch)
Dec 19 23:49:59 archbox systemd-logind[11822]: Watching system buttons on /dev/input/event5 (S...on)
Dec 19 23:49:59 archbox systemd-logind[11822]: Watching system buttons on /dev/input/event3 (T...ns)
Dec 19 23:49:59 archbox systemd-logind[11822]: New session 1 of user xxx.
Dec 19 23:49:59 archbox systemd-logind[11822]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-...ay.
and journalctl _PID=11822 returns:
Dec 19 23:38:01 archbox sudo[21335]: xxx : TTY=pts/1 ; PWD=/home/xxx ; USER=root ; COMMAND=/usr/bin/
Dec 19 23:38:01 archbox sudo[21335]: pam_unix(sudo:session): session opened for user root by xxx(uid
Dec 19 23:38:01 archbox sudo[21335]: pam_unix(sudo:session): session closed for user root
Dec 19 23:38:44 archbox sudo[22682]: xxx : TTY=pts/1 ; PWD=/home/xxx ; USER=root ; COMMAND=/usr/bin/
Dec 19 23:38:44 archbox sudo[22682]: pam_unix(sudo:session): session opened for user root by xxx(uid
Dec 19 23:38:44 archbox sudo[22682]: pam_unix(sudo:session): session closed for user root
Dec 19 23:39:10 archbox sudo[23516]: xxx : TTY=pts/1 ; PWD=/home/xxx ; USER=root ; COMMAND=/usr/bin/
Dec 19 23:39:10 archbox sudo[23516]: pam_unix(sudo:session): session opened for user root by xxx(uid
Dec 19 23:39:29 archbox systemd[1]: systemd-logind.service operation timed out. Terminating.
Dec 19 23:39:29 archbox systemd[1]: Failed to start Login Service.
Dec 19 23:39:29 archbox systemd[1]: Unit systemd-logind.service entered failed state
Dec 19 23:39:29 archbox systemd[1]: systemd-logind.service holdoff time over, scheduling restart.
Dec 19 23:39:29 archbox systemd[1]: Stopping Login Service...
Dec 19 23:39:29 archbox systemd[1]: Starting Login Service...
Dec 19 23:39:29 archbox systemd-logind[24096]: New seat seat0.
Dec 19 23:39:29 archbox systemd-logind[24096]: Watching system buttons on /dev/input/event6 (Power B
Dec 19 23:39:29 archbox systemd-logind[24096]: Watching system buttons on /dev/input/event7 (Video B
Dec 19 23:39:29 archbox systemd-logind[24096]: Watching system buttons on /dev/input/event4 (Lid Swi
Dec 19 23:39:29 archbox systemd-logind[24096]: Watching system buttons on /dev/input/event5 (Sleep B
Dec 19 23:39:29 archbox systemd-logind[24096]: Watching system buttons on /dev/input/event3 (ThinkPa
Dec 19 23:39:29 archbox systemd-logind[24096]: New session 1 of user xxx.
Dec 19 23:39:29 archbox systemd-logind[24096]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-displa
Dec 19 23:39:30 archbox sudo[23516]: pam_unix(sudo:session): session closed for user root
Dec 19 23:40:08 archbox sudo[25314]: xxx : TTY=pts/1 ; PWD=/home/xxx ; USER=root ; COMMAND=/usr/bin/
Dec 19 23:40:08 archbox sudo[25314]: pam_unix(sudo:session): session opened for user root by xxx(uid
Dec 19 23:40:09 archbox sudo[25314]: pam_unix(sudo:session): session closed for user root
Dec 19 23:40:43 archbox slim[641]: error 8: BadMatch (invalid parameter attributes) request 142 mino
Dec 19 23:40:43 archbox slim[641]: error 9: BadDrawable (invalid Pixmap or Window parameter) request
Dec 19 23:40:43 archbox slim[641]: error 4: BadPixmap (invalid Pixmap parameter) request 54 minor 0
Dec 19 23:40:56 archbox sudo[26739]: xxx : TTY=pts/0 ; PWD=/home/xxx ; USER=root ; COMMAND=/usr/bin/
Dec 19 23:40:56 archbox sudo[26739]: pam_unix(sudo:session): session opened for user root by xxx(uid
Dec 19 23:40:59 archbox systemd[1]: systemd-logind.service operation timed out. Terminating.
Dec 19 23:40:59 archbox systemd[1]: Failed to start Login Service.
Dec 19 23:40:59 archbox systemd[1]: Unit systemd-logind.service entered failed state
Dec 19 23:40:59 archbox systemd[1]: systemd-logind.service holdoff time over, scheduling restart.
Dec 19 23:40:59 archbox systemd[1]: Stopping Login Service...
Dec 19 23:40:59 archbox systemd[1]: Starting Login Service...
Dec 19 23:40:59 archbox systemd-logind[26935]: New seat seat0.
Dec 19 23:40:59 archbox systemd-logind[26935]: Watching system buttons on /dev/input/event6 (Power B
Dec 19 23:40:59 archbox systemd-logind[26935]: Watching system buttons on /dev/input/event7 (Video B
Dec 19 23:40:59 archbox systemd-logind[26935]: Watching system buttons on /dev/input/event4 (Lid Swi
Dec 19 23:40:59 archbox systemd-logind[26935]: Watching system buttons on /dev/input/event5 (Sleep B
Dec 19 23:40:59 archbox systemd-logind[26935]: Watching system buttons on /dev/input/event3 (ThinkPa
Dec 19 23:40:59 archbox systemd-logind[26935]: New session 1 of user xxx.
Dec 19 23:40:59 archbox systemd-logind[26935]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-displa
Updating system with pacman didn't solve it.
Did I miss something out while migrating to systemd, is it a problem with SLiM or user session maybe ? Do you guys have any ideas where to start ? Thanks.
Last edited by nastycino (2012-12-30 17:46:43)My /etc/systemd/logind.conf:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
HandlePowerKey=poweroff
HandleSuspendKey=suspend
HandleHibernateKey=hibernate
HandleLidSwitch=suspend
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
Is there any way of reinstalling parts of systemd like logind.service? -
Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine
I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick -
Monitoring Agent installation : Error 25362.Failed to start -2147023843 service
Hi all,
I'm facing several issues installing SCOM 2012 R2 agent on one of our servers.
I've finally installed it, but at the end of installation process, this error is shown :
Product: Microsoft Monitoring Agent -- Error 25362.Failed to start -2147023843 service
I've found nothing especially for this error from Internet
Thank you. Have a good day.
FXEHi
Here you find the instructions for tracing
http://blog.scomskills.com/scom-verbose-tracing/ or
http://www.scomgod.com/?p=640
For Fixing the Agent Installation try this (still applies to scom 2012, except certain path)
http://blogs.technet.com/b/kevinholman/archive/2009/10/01/fixing-troubled-agents.aspx or this might also help
http://www.bictt.com/blogs/bictt.php/2009/09/10/scom-agent-not-starting-after-installati
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer -
Error in Starting the service.The Service Schedule doesnot Exist.
when i install the Oracle 8i on Windows 2003 then
it installed successfully and import and export data successfully wothout any Problem
But after that when i restart the Server then
it ask for the User name and Password BUT when i entered the User Name and Password it show's that Error
"Error in Starting the service.
The Service Schedule doesnot Exist."
so please can you solve the problem ?
My mail id is [email protected]
Thanking you
Vikas gargHi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers. -
Error in starting the service Oracle CSService not found
Hi all,
i am trying to install Oracle Enterprise manager grid control,
i am getting the following error message
"error in starting the service Oracle CSService not found"
when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
then i checked in the service properties, and the path is pointing to a different directory,
now i want to change this path to the correct oracle bin directory.
any views how to cnage/update this path in the services.msc, for "Oracle CSService"
Thanks alot.Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers. -
iam new to OBIEE, while iam starting the services of Oracle BI Server, then display an error as
"Could not start the Oracle BI Server sercice on Local Computer.
Error 1064: An expception occurred in the service when handling the control request."
why this error occurs, is there any problem in installation or in any other else....Hi,
I have faced this before. When you change the NQSconfig file to add a new RPD created by you and change the INSTANCECONFIG.XML file with the services in started state you get this error. To rectify the issue please stop the BI SERVER and presentation server and JAVA host services. Then chnage the NQSCONFIG.INI file and INSTANCECONFIG.XML file. Then you start the services it will start without an error. -
Error while starting the service "oracle client cache"
hello everyone,
I keep getting an error message: while i'm starting the service "oracle
client cache "
The instruction at 0x7c911e58 referenced memory at 0x00000000. The
memory
could not be read.
please help me in rectifying this error ASAP
so that i can proceed further in my work
thanks in advanceHi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers. -
Error: Unable to start the services !!!!!!!
After restarting the Sww QA server i am getting the below error message ,I am not able to start the services
Below is the error :
<u><b>ERROR:</b></u>
The database
DRIVER=SQL
Server;SERVER=SWWSQLPRVSR1;UID=WindowsBGinfo;PWD-tricky;APP=BGInfo;WSID=FLMIRLET10373XP;DATABASE=WindowsBGinfo cannot be opened
Please ensure the database exists and is accessible
Regards,
Mag.Hi,
Following string
PWD-tricky
Should be:
PWD=tricky
Regards,
Marcin -
I fail to start the sap server with error:Operating system call recv failed
I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c 7883] -
While starting the services an error occurs.
hai,
iam new to OBIEE, while iam starting the services of Oracle BI Server, then display an error as
"Could not start the Oracle BI Server sercice on Local Computer.
Error 1064: An expception occurred in the service when handling the control request."
why this error occurs, is there any problem in installation or in any other else....
please say in detail.........
Thanks in advancethanks naresh meda and vency,
ur suggestions are helpful to me.
i checked my syntax in nqsconfig.ini. and set the path in the instanceconfig.xml. Then it is solved.
yah! i started services mannually .
thanks for ur suggestions.
Edited by: user10915889 on Mar 17, 2009 11:16 PM -
Plumtree Job Dispatcher Service is giving error when i start the service
Could not start the plumtree Job Dispatcher service service on Local Computer. The service did not return an error. THis could be an internal windows rror or an internal service error. If the problem persits, contact your system administrator... Any solution
Hi
There are many reasons fo this.
This may help
http://melick-rajee.blogspot.ae/2011/07/user-profile-synchronization-service.html
Workouts
First Check Forefront Identity Manager is Working (miisclient.exe). If this is starting most of the time their are no issues in Forefront Identity manager service and Sync Service. If so we have to check the databases for permission.
C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe
If this not working (Most of the time this is the issue).
we need to check following windows services. (Services.msc)
if miisclient.exe is not working either above service may not work. so try to start the service. if it is a login problem it will say that can not strat due to login problem.
then go to Properties
and check logOn username,password and Account.
After correcting this try to restart the profile service and synchronization in the SharePoint after restarting the IIS.
Melick Rajee http://melick-rajee.blogspot.com -
hi,
this is malli,
i got below error while installing grid software in rac.
os versin redhat 11inux 5.5
oracle 11gr2 cluster rac
thanks in advance....please do needful
Failed to start the Clusterware. Last 20 lines of the alert log follow:
2014-12-24 01:05:40.100
[client(3850)]CRS-2101:The OLR was formatted using version 3.
2014-12-24 01:05:41.923
[client(3852)]CRS-2317:Fatal error: cannot get local GPnP security keys (wallet).
2014-12-24 01:05:41.923
[client(3852)]CRS-2316:Fatal error: cannot initialize GPnP, CLSGPNP_ERR (Generic GPnP error).
2014-12-24 01:05:41.954
[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.
Have you looked in this log file to see why the OCR is inaccessible? Have you looked in the ASM instance's alert log for other clues?
Cheers,
Brian
Maybe you are looking for
-
ITunes wont connect to the itunes store.
Every time I try to connect to the itunes store it says the network connection is timed out and to make sure my network settings are correct then try again. Anyone know how to change your network settings or resolve this problem? thanks
-
Import a video player made in flash cs4 into flash builder 4
I want to import a video player made in flash cs4 into flash builder 4. Are there any pitfalls that i should be aware of?
-
Install Oracle BI 11g 11.1.1.5.0 Configuring OCM failed
Hi all, I'm installing Oracle BI 11g on Window7 32 bit. It's almost done. But I have an error at Configuration Progess / Configuring OCM failed. The message is: "Error encountered in deploying OCM instance. Exit code =1" I check the install Log: [201
-
I put a color label (In Finder, File-->color label) on a document or folder but it stays only a few hours (I think that at midnight it disappears) Why ? (remind me of Cinderella) All the other colors I made in the past stays. There's probably no conn
-
Installing Update fail for cs5 production premium
i recently installed some cs5 programs on my windows 8 laptop including photoshop, bridge, and illustrator. the problem im having is that they fail to update. Adobe Bridge CS5 4.0.5 Update There was an error downloading this update. Please quit and