ISQL*Plus startup problem
Having reviewed the recent thread on this subject but still unable to get iSQL*Plus - I need some help. Here are the details:
Environment: Windows XP, Oracle 10g PE
Started iSQL*Plus in CMD window with command: isqlplusctl start - and got message iSQL*Plus started
Now I go to IE and try the URL for iSQL*Plus I got when I installed: http://192.168.1.100:5560/isqlplus - and get the message: The page can not be displayed.
What am I doing wrong?
Any help is appreciated - as I am new to Oracle...
kavindra
Kavindra
i have installed oracle 9i release 1 on windows 2000 pro but iSQL Plus not working.
I checked on installed products and it is there and also find isqlplus.conf file.
what are the requirements of iSQL Plus and how can we chech them?
I have not find 'isqlplus.ini' where it should be?
isqlplusctl start is also not working.
how can we check http server availability?
I tried http://localhost but IIS is opening.
Tried http://localhost:7776/isqlplus - getting same message: The page can not be displayed.
Hope you can help on this issue as you solved your problem.
Similar Messages
-
MSI eclipse plus startup problem
Hi,
I have the MSI eclipse plus motherboard, but I have a strange startup problem.
Sometimes my computer fails to start up. When I try again sometimes it works fine. (without changing any hardware or software configuration)
The Eclipse plus has a small D-led2 panel that shows information about the startup phases.
When my startup fails, the panel mentions: CPU init. And the error Code is FF (this means: power on and first initialize CPU)
(This is the phase just before DDR init).
So the startup fails in a very early stage of the startup process, (before I can access my bios)
When the start up fails, I have to disconnect the power cable, reconnect and try to start again. This is a very uncomfortable situation.
I have the latest BIOS version 21/04/2009 V1.0
I tried the fail-save default options in the bios.
My processor is i7 940
RAM: OCZ DDR3 . 6 pieces of 2GB. 1600Mhz (3 dual channel kits)
Power supply: Corsair 1000Watt
I hope somebody can help me.
Thanks in advancePlease note that the memory controller was moved into the CPU with the i7 - it is no longer part of motherboard chipset (MCH). You're not the first and probably won't be the last to buy the wrong type of DDR3 memory for your i7 rig. People, before you buy; check if the memory you are handing money over for is actually suitable for your CPU. Simple really as they will state they are i7 compatible. The i7 has a recommended maximum voltage of 1.65V for the integrated memory controller, 1.9V is probably a dangerous voltage to set it to (if the BIOS even allows it). To quote the OCZ FAQ:
Quote
The memory supply voltage also powers the receivers and senders on the memory controller with a voltage plane known as VDDQ. Because the Corei7 is manufactured on a 45 nm node, the logic is sensitive to overvoltage and Intel defines the upper safe limit for the Core i7 as 1.65V.
So to answer your question:
Quote
I still have one question: What do I risk with my DDR3 memory that is standard at 1.9V
More than likely, the integrity of the i7 940 itself. You have to ask yourself, "What's cheaper to replace... the RAM or the CPU?" The answer should be simple enough to work out for the average user.
I'd be taking the RAM back if at all possible and exchange/upgrade it for an i7 compatible kit (which will be three/six stick tri-channel, not two/four sticks dual-channel) designed to operate within the 1.5V~1.65V recommended voltage range. The OCZ equivalent (comparing what you currently have) to what you want would be this range. -
Hi Guys
i am desprate to know whats going on ym system,Please help me
i am sending u the messeg i got in command prompt
C:\oracle\product\10.2.0\db_1\jdk\bin>C:\oracle\product\10.2.0\db_1\jdk\bin\java -Djava.security.properties=C:\oracle\product\10.2.0\db_1\oc4j\j2ee\home\config\jazn.security.props -jar C:\oracle\product\10.2.0\db_1\oc4j\j2ee\home\jazn.jar -adduser sys username sys
oracle.security.jazn.JAZNRuntimeException: Configuration file "config\jazn.xml" does not exist. Check your JAAS configuration settings.
at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
at oracle.security.jazn.JAZNConfig.access$100(Unknown Source)
at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
at oracle.security.jazn.util.Dbg$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jazn.util.Dbg.getJAZNProperty(Unknown Source)
at oracle.security.jazn.util.Dbg.getBoolJAZNAndSystemProperty(Unknown Source)
at oracle.security.jazn.util.Dbg.<clinit>(Unknown Source)
at oracle.security.jazn.JAZNConfig.fileExists(Unknown Source)
at oracle.security.jazn.JAZNConfig.getDefaultJAZNConfigFilePath(Unknown Source)
at oracle.security.jazn.JAZNConfig.access$000(Unknown Source)
at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
at oracle.security.jazn.tools.Admintool.refresh(Unknown Source)
at oracle.security.jazn.tools.Admintool.init(Unknown Source)
at oracle.security.jazn.tools.Admintool.main(Unknown Source)
RealmLoginModule username: scott
RealmLoginModule password:******
User does not exist in system.
and which user the system is asking for
ThanksHi,
1. Check if the scott or sys or apps user is locked by giving
SQL> select username from dba_users where account_status <> 'OPEN';
The usually occurs when the account is locked...
If your are not able to login to sql itself...set the environment and try the same..
thanks,
baskar.l -
Problems starting iSQL PLUS service on Windows XP
Dear Forum,
I installed oracle 10g for the first time on Win XP. The Installtion-Process was fine. Now I'm not able to iSQL Plus, beacause the iSQL service in the administration area does not start properly. The status always says that it is starting unfortunately with no success.
Need help!
Thanks in advance
sportmeierhi
i was wondering if and how you solved this error
i have the same problem now
thanks -
ISQL*Plus problem..
I am a newbie of Oracle, just installed Oracle in my own PC as well as iSQLPlus servies started.
I have no problem in entering http://MYIP:5560/isqlplus, I failed to login by using sys account.
It return an error 'ERROR - ORA-28009: connection to sys should be as sysdba or sysoper'
I entered:
username: sys
password: [password for sys]
Connect Identifier: eepmf (name of my DB)
I have ever tried to leave Connection Identifier empty. But the problem persist.
Did I miss the Oracle Net Connection string? (According to my study guide, but I am not sure what is it)... Could someone help me? Thank you so muchI am trying to do the following but cannot proceed in step 2...
To set up the iSQL*Plus DBA URL
1) Create users for the iSQL*Plus DBA URL - I have created a new user named 'stanley'.
2) Grant the webDba role to users. - When I tried to add the role to this user, I cannot find 'WebDBA', I just found a role named DBA but not WebDBA - are they the same or I missed some steps?
3) Restart the iSQL*Plus server after making any changes to the JAZN authentication file, jazn-data.xml. The JAZN authentication file is changed when you use the JAZN admin tool to set up users for the iSQL*Plus DBA URL. -
Hi All,'
here i am facing one problem with ISQL plus
i am connecting ISQL plus from Oracle Enterprise manager(OEM) while connecting it throws an error
"connection was refused when attempting to contact <servername>:5560"
Please help me outAfter the port you are reporting on your thread, 5560, it looks like you are using a 10g release, however it is advisable to specify both, the os and db version at the start of your thread, isqlplus has had several architectural changes throughout the different oracle versions since it first appeared at 9iR1 going through 10gR2. There have been people who are even surprised to find out it is no longer installed with 11g and unnecessarily find a hard time trying to set it up.
~ Madrid -
Some Smaller Problems concerning HTTP-Server and iSQL*PLUS
Hi!
System: WIN2K, ORA 9.0.0.1
1. Problem: With HTTP-Server launched by ORACLE at System Start
can not connect to DB via iSQL*Plus, message: ORA-12638 (german
message:"Abruf des Berechtigungsnachweis misslungen") Credential
retrieval failed. Does no longer occur when shutting down
service and relaunching Apache manually. Why?
2. HTTP Server dies instantly when accidentially sending /*
somewhere in SQL-Statement or alone via iSQL*Plus (in SQL*Plus
Window /* starts DOC-Mode without chance to end DOC-mode with #)
Can anyone help? Thank you!
TIP: Manipulating Database via iSQL*Plus on a Eudora-Browser
with IR Cellular impresses every Boss! :-)Hello CJ
1st of all: Thank you for your answer!
What privilege iSQL*Plus connection are you trying make?Tried as normal user and as sysdba. Both works well with Apache
in Console, both doesn4t work with Apache as a Service started
(even if there is a 2nd Apache started in Console window)
Can you connect as a normal user
if you specify a full DB connection string? By full connection
string I mean the "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS...)))"
etc. syntax commonly seen in tnsnames.ora. No! Error "SP2-0306 Invalid Option" occurs.
that the problem also occurs in the old GUI (non-web version)
version of SQL*Plus?Right! Typing DOC means entering (now unsupported) DOC Mode
(DOC> Prompt) return to SQL> with #. Typing /* gets you into DOC-
Mode but you can4t leave with #. (SQL*Plus userguide and
reference Part F Obsolete Commands)
In iSQL*Plus (web based version) typing /* caused apache to die
(on console!! as service as I mentioned: no connection ).
Somehow problem no longer occurs. (Miracle?)
3. Your Palm efforts sound neat! Can you share with the forum
how usable it is? Are there any configuration tricks
you found?No tricks needed, I just started a connection to a local
Provider via IR and Nokia Cellular. Connected to DB via
iSQL*Plus using Eudora-Browser, logged in as sysdba and shutdown
DB and started it again. Looked at some v$-views, killed a
session or two had a good time and impressed everyone. Decide
for yourself if this could be useful. Might be helpful for
remote troubleshooting during holidays so don4t tell your boss
about it.
(Did anyone try this on Windows CE? Like to know!)
Dominic -
Problems with report using isql*plus
Hi there,
As the title of this topic illustrates, i'm having trouble dumping relevant data from columns of different tables. Using isql*plus, I have three tables appropriatly related. A 'course' table, 'student' and 'next_of_kin' tables. I have many students enrolled on various courses but only a hanfull of courses offer the module option 'Database Systems'. I have no 'module' table but i know the three course names which provide the module option. I intend on producing a report hich lists all students enrolled on the courses which provid the module option 'Database Systems'. I have attempted the report but i keep getting a 'cartesian product' displaying all next_of_kin names instead of the appropriate. Also i am struggling to come up with the right WHERE statement to depict only the three courses which provide the module option 'Database Systems' as defined by 'courseNo' in both 'course' and 'student' tables.
Here is the most recent attempt:
--set echo off*
--set pagesize 24*
--set feedback off*
--set linesize 78*
col A format 99999999 heading 'Student No'
col B format A15 heading 'Student Name'
col C format A15 heading 'Course Name'
col D format 99999999 'Course No'
col E format A10 heading 'Next-of-Kin'
break on A skip 1 on B
TTitle 'Business Studies 1 Option BT300'
BTitle 'Prepared By : Richard Stroud / 20527796'
Select student.StudentNo "Student No",
student.fName || ' ' || student.lName "Student Name",
course.title "Course Name",
course.courseNo "Course No",
next_of_kin.fName || ' ' || next_of_kin.lName "Next-of-Kin"
From student, course, next_of_kin
where course.courseNo = '12885545'
order by studentNo
--clear columns*
--TTitle off*
--BTitle off*
--set feedback on*
--set pagesize 24*
--clear breaks*
Any help towards this toipic will be GREATLY appreciatedAccording to my little knowledge - i don't think Oracle is an AIDB. It is only RDBMS or rather you can call it Advanced RDBMS.
Now, you are thinking that since you have provided the relavant table here - so Oracle should automatically pic the single records. Since you have define every logic including the concept of primary key, foreign key in your table.
But, question is - did you apply the relationship in your join between the tables.
What does a primary key, foreign key do inside a table? Is it automatically select the unique rows from the join tables - when you didn't mention the join criterion.
If you think that - then you are wrong. My advice is - kindly go through the JOIN Concept.
Then start your coding. This is very dangerous way to start. Learn the basics at least.
So, what Senti suggested has a very much valid point.
Regards.
Satyaki De. -
ISQL*Plus script parsing problem with the + operator
Hi,
You have most likely caught this one already.
Select power(3,2) + power(3,2) from dual;
Works from the iSQL*plus window but not when loaded from a script; the + operator is getting removed.
Regards,
Rob
nullThanks for the report. The fix for this is indeed already in our 9.0 code (which will be the next release of iSQL*Plus)
- CJ -
Thanks. A new problem when connecting isql*plus to database
Thanks for everyone helping me.
I can browse the isql*plus page now. However, When I connect isql*plus to the database, I got the error displayed in the isqlplus login browser screen:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Pls help.Can you connect to it from command line SQL*Plus?
It sounds like the database is not running. You should start up the database and try again.
Alison -
Isql*plus 9.2 problem: Substitution variables
hi, i'm new to using isql*plus.
i have written the following script to setup my the structure of a database, it works but when i execute it it asks me to:
Substitution Variables
Enter values for substitution variables in the script to execute:
Variable Value
d
I cant work out why, please help.
here's the script:
--author: daniel smith
--student number: 2235592
--date: 17/02/2005
--isql plus
--Application Development and Database (AD&D)
--Assessment 3
--drop existing tables
drop table expense;
drop table sess;
drop table assignment;
drop table task;
drop table stage;
drop table project;
drop table task_type;
drop table employee;
drop table grade;
--create new tables
create table grade
grade_no number(6) primary key,
description varchar2(50),
rate_per_hour number(5,2)
create table employee
employee_no number(6) primary key,
surname varchar2(50),
first_name varchar2(50),
grade_no number(6),
foreign key (grade_no) references grade(grade_no)
create table task_type
task_type_no number(6) primary key,
description varchar2(50),
grade_no number(6),
foreign key (grade_no) references grade(grade_no)
create table project
project_no number(6) primary key,
project_code varchar2(50),
client varchar2(50),
description varchar2(50),
manager number(6),
foreign key (manager) references employee(employee_no)
create table stage
project_no number(6),
stage_no number(6),
description varchar2(50),
Start_date date,
planned_Duration number(6,1),
fees_basis varchar2(2),
primary key (project_no,stage_no),
foreign key (project_no) references project(project_no),
constraint fees_basis_ck check(fees_basis IN ('fq','vs','vn','cs','cn'))
create table task
project_no number(6),
stage_no number(6),
task_no number(6),
description varchar2(50),
estimated_hours number(6,2),
planned_start_date date,
max_duration number(6,2),
task_type_no number(6),
primary key (project_no,stage_no,task_no),
foreign key (project_no,stage_no) references stage(project_no,stage_no),
foreign key (task_type_no) references task_type(task_type_no)
create table Assignment
project_no number(6),
stage_no number(6),
task_no number(6),
employee_no number(6),
estimated_hours number(6),
primary key (project_no,stage_no,task_no,employee_no)
create Table Sess
Session_no number(6),
Session_date date,
actual_Hours number(6),
chargeable char(1),
project_no number(6),
stage_no number(6),
task_no number(6),
employee_no number(6),
primary key (Session_no),
Foreign key (project_no, stage_no, task_no, employee_no)
references Assignment(project_no, stage_no, task_no, employee_no),
constraint chargeable_sess check(chargeable IN ('y','n'))
create table expense
expense_no number(6),
description varchar2(50),
quantity number(4),
unit_cost number(4,2),
chargeable char(1),
project_no number(6),
primary key(expense_no),
foreign key(project_no) references project(project_no),
constraint chargeable_exp check(chargeable IN ('y','n'))
**********************************************************<< ..
<< --Application Development and Database (AD&D)
<< --
take the '&' off your script,
oracle thinks you want to define variable D,
and obviously you don't want that -
Isql*plus is taking too much time to stop
Hi,
today encountered one problem...isql*plus is taking hours to stop the process...
iSQL*Plus 10.2.0.3.0
Copyright (c) 2003, 2006, Oracle. All Rights Reserved.
Stopping iSQL*Plus ...
when i issue the isqlplusctl start....it shows that, process is already running...
how to encounter this problem..i have gone through the all metalink document regarding this..not helpful...
I am not able to ge the home page of isqlplus
http:<hostname.domainname:5560/isqlplus
how to resolve in this case..I wanted to restart the isqlplus process...but it is taking hours wile doing that job- To stop iSQL*Plus, enter the command:
$ORACLE_HOME/bin/isqlplusctl stop
- To verify whether iSQL*Plus process is running, use the following command:
$ ps -eaf |grep java
If you have any running processes, use kill command to terminate those processes.
- To start iSQL*Plus, enter the command:
$ORACLE_HOME/bin/isqlplusctl start
It is worth to review Note: 300547.1 - Troubleshooting Guide for iSQL*Plus issues
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=300547.1 -
Not able to start isql*plus service
hello,
My problem is that I am not able to start isql*plus service,its continuosly showng "starting.." status but doesnt start.In the event viewer there is an error of isql*plus service which says
The description for Event ID ( 11 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1056, An instance of the service is already running.
Please help me resolving this problem
The database is Oracle 10g r2 10.2.0.1.0.
ThanxEnsure that your iSQL service is running..
which OS you use? -
I am new to oracle 9i. can someone tell me real quick how to get the Oracle isql*plus login prompt from my browser--
I am on
windows 2000
oracle 9i enterprise edition (9.2.0.1)
netscape browser
I have access to sqlplus but have no idea to log into isql*plus
ThanksThanks for the response, and yes you do have a valid point. Well...looks like I have a problem running the Oracle HTTP server. Here's what is happening --
I go to Start->Programs->Oracle-Ora9->Oracle HTTP Server->Start HTTP Server powered by Apache
I am trying to start the HTTP server this way, but I get a dos window opened saying
Syntax error on line 298 of c:/ora9/apache/apache/conf/httpd.conf:
Port must be numeric
Note the errors or messages above, and press the <ESC> key to exit ....
I did go to the location above and opened the file to look : The related statements I found were -
Port 7777
Port null
Listen 7777
Listen null
Could there be anything wrong here ? Any idea as to how I get thru this problem and correct it so that I can start my HTTP server. Thanks -
Running ISQL Plus over a home network
I have a small wireless home network (3 machines), and installed Oracle 10g on one machine. ISQL works fine on this machine. However, I would like to be able to run queries from the other machines using ISQL PLUS.
Have tried, //<<machinename>>:5560/isqlplus, but this returns a message that the requested page cannot be found.
Ive pinged the database host machine from a second machine: ping <<machine name>>, and got a reply but when I pinged the port on the host machine: Ping <<machine name>>:5560, I got no reply. How do I solve communication with this port.
Any assistance appreciated.
JHPing <>:5560, I got no reply.Pinging port is not possible. Btw you can't use somthing what is using ICMP protocol (ping) for testing of TCP connection. So use the telnet command for testing of connection.
P.S: Wrong forum (section) for this type of problem.
Maybe you are looking for
-
SRM 5.0 External Catalog is not working in SRM 7.0
Hi, I am facing an issue with External Catalog. It is working fine in SRM 5.0 but not working in SRM 7.0. I added the returntarget parameter and HOOKURL but still no luck. The parameters I have entered are http://www.xxx.es/punchout/sap/ocipunchouth
-
Hello All, I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library. To be specific. I have Created a Project Document Set, Which has a Column called "Project Members" w
-
How can I get my iCloud calendars to show up in Outlook for Mac
I just bought a new Mac and downloaded MS Office 365 for Mac. How can I import my icloud calendar into Outlook? I can't find any concrete info anywhere online. Thanks!
-
I would like to know if exists a way of to call external program in windows ce. I'm using cvm J9.
-
I am trying to print out a simple, single picture as a 4x6 glossy print. I have checked all setting in LR and for printer (e.g. paper size, orientation, margins) and still get a wide white border with a shrunken version of my image scaled and center