ISR Process object - Workflow is not getting triggered -

Hi
I am facing some strange problem, in my project we are using the new HCM concept using Process Object and not the Notification type,
I have take standard scenario SBC1 - child birth, done the config and checked the form and also process its not giving any error.
But when i tried test process execution "HRASR_TEST_PROCESS", getts error message " Work Item Not Found; Workflow Not Started" and "Process Object Not Created",
when i check the log in SLG1 tcode for Object: HRASR, Subobject: POBJ. "Case 46CC2D7604BB275EE1000000995893A9 does not exist. No administration authorization in Change and Transport System", this error message only consfuse me more.
Can you help me on this, if you required i will send the screen shot of the error message
Regards
Anand KS

In most cases, this means that the 'Start Process' is not configured correctly. Take a look at the following:
1. make sure that the Wf assigned to your start process is active
2. make sure that reference numbers are configured and assigned to your process
3. assign a user to receive error messages when an error occurs
Thanks,
Derrick Banks

Similar Messages

Standard workflow is not getting triggered

Dear all,
I have activated standard worflow for QM module for notification, but after saving notification workflow item is not getting diaplayed in Inbox.
Thanx & regards,
Harish.

Hi,
1) Check that workflow triggered or not in SWEL or in the Creator's (SBWP) Outbox --> Started workflows
2) If it was triggered, the agent determination might be failed
3) Also check whether you maintained that task as a General Task.
Regards,
Surjith

Workflow for Process Route in SCASE not getting triggered

This is for the credit case workflow using a process route. I have carried out all the necessary settings in config for Process Route setup in Case Management. I have activated the type linkage for standard template WS78900007 and refreshed the organizational environment. When I created a case and assigned the processor using process route, it doesn't trigger the workflow. Any ideas for fix ? Thanks.

Hello,
First step is to go to the event trace (SWEL - turn on with SWELS) and see if an event is being created.
regards
Rick Bakker
hanabi technology

Workflow not getting triggered from Z inbound FM

Hi
I have created a simple workflow with start events
Object Type IDOCAPPL EVENT - INPUTERROROCCURRED
activated the binding and activate the linkage
also in the idoc inbdound FM i put workflow_result = 99999 also added the object and the start and end event in process code link
however the workflow is not getting triggered do i need to trigger it manually using swe_event_create....
what is the miostake

Hello,
Even if the event linkage is configured correctly, you have to trigger an event with the FM swe_event_create to run your workflow.
You have a transaction SWU0 that can simulate an event => then you can check if your event linkage is correct.
Please reward if useful.
René

Workflow not getting triggered on status change

Hiii Everyone
Workflow is not getting triggered whenever I change the status of the Order (Lead). When we create a lead a workflow is triggered.
1. If the status is Open a mail is sent.
2. Then the status is checked for in process. And whenever the status is changed to inprocess it is assigned to the agent by the rule attached to the workflow.
3. And again when the status is changed to sanctioned a mail is sent.
Now problem is if I create a lead and change its status to inprocess and then save , then the mail is sent and it is assigned to the agent properly. But when I change the status to sanctioned , then the mail is not sent for sanctioned(i.e. no worklfow step is shown in swel).
If I open the lead and save it then the mail is sent properly. But then after that when I change the status to inprocess, the workflow is not showing agent assignment (jn swel).
Summary: Whenever I cahnge the status after saving the order , the workflow is not showing any further step .
Please suggest the solution.
Regards
Shafali

Hi,
Your workflow has been triggered when the status is open and then when change the status to in process,it is not sending mail as there is no agent assignment.
That means, workflow triggered, but it is not going to the next step.
Is it a standard or custom one?
Can you post the workflow log screenshot over here?
Cheers,
Raja.D

OIM 11gR2 Approval workflow not getting triggered

I created an approval workflow by following the 11gR2 developer's guide and deployed it. then created an app instance and also an approval policy for operational level which is auto approved and for request level with this composite. when i raise a request for this app instance in the catalog the SOA composite is not getting triggered. I am able to see a task in pending approval of system admin whenever i raise request for any user and if i complete that pending approval the app gets provisioned directly. Also i do not see any request ID also. please help to find out whats going wrong

Now i tried raising a request from another user who is not a member of SYSADMIN role. This time the request id is generated and a task 'Manual Task for Provision operation for Beneficiary X' is generated in pending approvals of xelsysadm user. When completed the app instance gets provisioned. So this means operational level approval task is triggered? and it has auto-provisioning?
why my custom approval workflow is not getting triggered?
I have created 2 approval policies, one for request level which is auto approval and other for operational level where i have selected the deployed composite name.In both the approval policies i have selected the request type as Provision ApplicationInstance. There is no error also while deploying the composite. Am i missing any step? please help.
Edited by: 955932 on Jan 10, 2013 10:19 PM

Event not getting triggered for a few users in production

Hi Experts!!
We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
Your help is highly appreciable.

Hello Srinivas !
              Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
              If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
              Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
             Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
Regards,
S.Suresh

Exit Class for Inbound Mail not getting triggered

Hi Gurus,
I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
I have made all the settings for SMTP.
Kindly guide me with the steps needed to be followed for triggering the Exit Class.

Hi
Check u have maintained ur outgoing mail server IP in SCOT transation.
Check link step to configure PO mail.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

Events in USER objects type not getting triggered in PFCG

Hi,
We need to send some notifications to the concern person at the time of assiging roles to the user . There is an object type USER and has events like created,cloned, deleted, roles_changed. But these events not getting triggered.
I need to trigger the workflow. How do we activate the events as the entry doesnot exits in SWE2 tooo . Is ther any other way?

HI munish
If the entry is not in swe2 Put the entry for the business object USER and use the receiver type as your workflow number.
Regards
vijay

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

Treasury workflow not getting triggered .

I have done all as given in the SAP doc ...
The release procedure for the business partner has been set up using a Business Workflow, for
which SAP has defined the standard role 20000053 'TRLOAPPROVAL' and the Workflow
template WS20000263 'WSTRLOAPPROV'.
Procedure
In order to use the release workflow for the business partner, you are also required to make
settings in Customizing for the Basic Functions area in Treasury in the following IMG activities:
By choosing u2019Activate Releaseu2019, you can activate the release for the business partner.
By choosing u2018Maintain and Activate Release Parametersu2019, you can specify the number of
release steps you require for each role category.
By choosing 'Adjust/Copy Workflow Template', make the following settings:
By choosing 'Define Standard Roleu2019, you create the responsibilities for the standard roles
delivered with the system, to which you assign users, positions, organizational units,
work centers, jobs, or people. Using the settings you make here, the system determines
the Responsible Agent [Ext.] during the workflow run.
By choosing 'Adjust Workflow Template', you then have to activate the event linkage.
but its not getting triggered .. the event which is gettting triggered is not the one whcih is used in the workflow
Thanks for help .
Naval Bhatt

Naval,
Either you can check SAP notes for the same or you can customize the workflow. If the event being triggered is different then copy the workflow and change the workflow start condition.

Workflow not getting triggered from MM01

Hi,
I understand there is a similar post but the solution is not so clear there.
I wish to trigger a workflow whenever a material is created using tcode MM01.
For which i am using BUS1001. (In the header data > start events tab > BO/BUS1001/CREATED binding exists and activated)
whenever i am creating a material using MM01, and check the trace in SWEL i am getting the following info:
BUS1001006     VIEWCREATED     25.03.2011     13:00:12          @AI@     No receiver entered
BUS1001006     CREATED     25.03.2011     13:00:12     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
Can someone please help where to enter the receiver.
regards
abhishek

Hi sanju,
I have created the event as per your suggestions but the workflow is not yet triggered from mm01.
the event stack trace is as follows :-
BUS1001     CREATED     28.03.2011     08:28:42     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001006     VIEWCREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
BUS1001006     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
Linkage is activated in SWE2 and the receiver FM is SWW_WI_CREATE_VIA_EVENT.
still unable to get the workflow triggered.
Secondly as per SAP suggestion the BO BUS1001006 should be used for std material master. But while i enter BUS1001006 no such methods are available in F4. (refer atttachment)
I have checked in the BOR and i see that BUS1001006 is released and active.

Change Process are not getting triggered

Hi,
I have changed the first name of the user in OIM but the same is not getting sycned in DSEE.
When I have added the Change First Name Process task from Resource then it got successfully completed and the user's first name got changed in DSEE.
Automatically Change First Name process task is not getting triggered. It worked for me earlier but now it is not working.
Could you please let me know the reason for the same.
Thanks

verify below
1. task name under DSEE process def and process trigger lookup is exactly same(remove if any white space etc.)
2. make sure the task is marked as conditional
3. Allow Multiple should be checked
--nayan

Issue in Production for Workflow not getting Triggered .

Hi Guys,
I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
Thanks

It getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid.

Issue in workflow workitem that gets triggered to two users at one time.

Hi All,
Below are the query details:
Module: HR
Area:      Workflow
Process: Hiring
There is an workflow in HR module that is triggered when an hiring action is run against an candidate.
There are two or three maximum approvers which is based on the position to which the candidate is hired.
Issue:
During the hiring process some times the workitem is getting triggered to two users at once.
One is the actual approver who should receive the workitem in his UWL and other is the user of our service center who is no where involved in the approval process.
Analysis Done:
We checked the workflow log and found that the actual approver's ID is getting displayed under agent and workflow is complete. But the other user's ID is no where shown in the log but he has received an workitem in his UWL that makes the issue still confusing.
Awaiting for experts suggestions.

Reply to Susan Questions:
You say that 'the workitem is getting triggered to two users at once' - do you mean that there are two workflow instances that are being kicked off at the same time when the hiring action is performed? Or is it that the workflow is generating two tasks that go to these different users?
Ans : There is a single task attached to the activity.
Is this a custom workflow?
Ans : Yes.
Are you certain that the erroneous task is only going to the user in the service center, or is it perhaps going to everybody (marked as a general task)?
Ans : The task is marked as general but the workitem is received by only one user of the service center at a time.
         As this issue has taken place 4 times in the past year all the 4 receiver were different belonging to different position.
Reply to Pavan Questions:
1. Did you try to check the SPRO settings with respect to Hiring Process ,is there any where based on the position does workflow is forwarding the workitem to the other user.
2. Check the other user Roles and in the Org Structure where he is located , there could be a possibility of wrong position holding.
Ans : We checked the org structure, but org structure of both the centers are different and independent there is no linkage    between the two.
*3. IF you are using custom workflow then check if any standard workflow is also getting triggered. Check *
Ans : Yes this is a custom workflow, but no other Standard workflow is being called.
4. Check in the SWEHR3 is any custom entries maintained.
Ans : No, entries are maintained in SWEHR3.
Additional Info :
The task that triggers the workitem has an send mail step before it.
The send mail activity is to notify receiver that there is an workitem lying in the UWL.This mail is received by the actual user and not by the other one.The next step is the task that creates workitem which gets triggered totwo different IDs.
This scenarios mostly has come up when the number of approver is 1. If the approver is more than 1 the workflow runs fine without deviating the workitem to any worng user.

ISR Process object - Workflow is not getting triggered -

Similar Messages

Maybe you are looking for