Isssue in File To RFC Scenerio

Hi Experts,
   I am sending a .DAT file to R/3 using PI.
   File gets successfully picked up from FTP into PI. But sxmb_moni is not showing any error messeges, nothing. In fact I know this is a perfectly OK file as few days ago it was successfully processing the same file, without errorrs.
I hav checked in messege monitering and got the following error.
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Received XI system error.error Code:SLD_NO_OWN_BS Error Text:Error Stack:error while reading ID of own business system from the SLd for system RXT and client 001 Internal error in Landscape Directory.
I hav checked the LOG in SLD and got the fllowing error.
#1470 03/10/2009 15:00:49.918 [SAPEngine_Application_Thread[impl:3]_18] WARNING com.sap.lcr.cimsrv.ChangePasswordServlet: Password change required for automated client. Please ensure that service client users don't have initial passwords. Alternatively, logon to the SLD user interface with the corresponding user and assign a new password. After the password has been changed, client settings must be updated accordingly.
I hav done no changes in any where,, no password change or no craetion of new client. This scenerio was working ok, but all of a sudden it started giving this strage issue. Only hint I can giv is,, the file size is some where around 2.5mb,, and i believe this is NOT a constraint..but may be I can be wrong.
Please comment experts.
Regards,
Arnab .

Hi! Arnab,
com.sap.lcr.cimsrv.ChangePasswordServlet: Password change required for automated client. Please ensure that service client users don't have initial passwords. Alternatively, logon to the SLD user interface with the corresponding user and assign a new password. After the password has been changed, client settings must be updated accordingly
According to my knowledge the issue is not related to development side. Please check with your basis guys to check all the conenctions like SLD conenctions and J2EE engine status and also regardign ABAP stack.
1. Got to ABAP stack and enter T code SLDCHECK.
2. Also goto T code SMICM and there restart j2ee engine by selecting options J2EE soft Restart in the top menu.
3. If still issues s there then if possible ask them to do entirre XI server restart once..
Also go through this SAP note and ask your basis guys if any patches are to be implemented.
[Note 1225611- com.sap.lcr.cimsrv.ChangePasswordServlet:|
[1225611|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1225611]
Regards::
Amar Srinivas Eli

Similar Messages

Problem in FILE to RFC scenerio

Hi,
I am working on File to RFC Scenerio
I am getting a problime in Communication channel (Sender).
The problem is coming in File COntent Conversion
Parameters are like
Documenet name : MT_ROXY ( ->Header -> EMPNO
                                                             -> EMPNAME
                                                             -> DEPTNAME)
Recordset Name: Details
Recordset str     : HEADER,*
Recordset Seq   : Variable
" per message   :*
Conersion Params:
ignoreRecordsetName : True
HEADER.addHeaderLine : 0
HEADER.fieldSeperator: ,
HEADER.endSeperator: 'nl'
HEADER.fieldFixedLengths : 12,40,40
HEADER.fieldNames          :EMPNO,EMPNAME,DEPARTMENTNAME
HEADER.lastFieldsOptional : YES
Problem:The message content i am getting is like
<ns:MT_ABAPPROXY>
−
     <HEADER>
<EMPNO>IT,Munish,22</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IP,Munish1,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IS,Munish2,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IQ,Munish3,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IR,Munish4,2</EMPNO>
</HEADER>
</ns:MT_ABAPPROXY>
as it does not dividing the Fields by ,
as it shud come like
<EMPNO>IR,2</EMPNO>
<EMPNAME>Munish5</EMPNAME>?
<DEPARTMENTNAME>2</DEPARTMENTNAME>
but its not taking the other 2 filds and not separating by , sepreator,
Kindly guide me in solving this problem on urgent basis
Thanks in Advance
Munish SIngh

HI,
Then use only fieldSeparator see the spelling it should be in proper case.
refer the below weblog for more information:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
Also refer the file FCC parameters.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Thnx
Chirag

File to RFC Scenerio in PI 7.1

Hi Experts,
Please provide any documents for File to RFC Scenerio in PI 7.1

The procedure is the same as it was in SAP PI7.0 or lower versions.....no major change on this front.
Search SDN for documents related to your protocol.
Regards,
Abhishek.

File 2 RFC scenerio

Mine is a File toXI to RFC scenerio.
File in DAT format is picked up fro FTP and send to XI. XI further sends it to BI server through RFC adapter. The thing is due to some reasons I hav deliberately entered wrong data uid and password] for XI to BI connection in sm59 and in the RFC adapter. Initially just wished to see wether the data movement between File aServer to XI takes place properly.
Activated the components and carried out the Tools - Test Configuration.
It is giving following error:
Receiver Agreement
More over when ever I place the file in the specified soure path ....I don see any RESULTS IN sxmb_moni or messege monitoring .
But Communication channel monitoring shows GREEN for file adapter.
My query is if sender File adapter is green and polling, why do i not see the same in messee monitoring and sxmb_moni.
Pls comment.
Pls revert back if anything is not clear.

Hi,
just for check - in ID in sender file comm channel, set mode to delete and see if your test file in source directory is getting deleted.........if it is deleted, then in comm chnnel monitoring, you will get yur msg and also in SXMB_MONI...........if the file is not deleted, then check for file permissions to pick the file..
Regarding your No receiver agreement found error, in ID just create the reciver agreement for your sneder system, reciver sytem, receiver interface namespace data.............activate it and restart your msg in SXMB_MONI.
Regards,
Rajeev Gupta

Problem in Picking the file in FTP to RFC Scenerio

Hi,
I am using FTP to RFC scenerio, i have a CSV file and need to use file Content COnversion at the sender Communication Channel. But its not picking up the file from my FTP..
My data is like
11    Munish     IT
My Message Type is like :
MT_ABAPPROXY ->
             HEADER    ->>
                                Empno
                                Empname
                                Departmentname
My Communication channel is like this..
Transport Protocol:FTP
Message Protocol:FIle COntent COnversion
SOurce Directory : /
File name:            file.csv
then Server name and port is corrwctly configured
My messe Content COnversion is like this
Doc Name:MT_ABAPPROXY
Namespace:http://www.munnamespace.com
Recordsetname:Details
Rec Str :            HEADER,*
HEADER.fieldSeperator     ','
HEADER.fieldNames    Empno,Empname,Departmenname
HEADER.lastFieldsOptional   YES
HEADER.fieldFixedLengths    12,24,24
ignoreRecordsetName         true
HEADER.endSeperator     'nl'
But it is unable to pick the file , but if i wont use file conten conversion , it picks but it has no use as the date is not in XML
SO kindly help me in solving this as the problem is mostly in File COnetent Conversion
Thanks
Munish SIngh

Hi arvind,
thankd for the reply,
i have done the same what u said but i am getting this error in communcation channel monitoring (RWB)
     Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'HEADER':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this

File processing issue -File- PI- RFC

Dear Experts,
I have struck with this source file while processing the scenerio FTP(File) ->PI->RFC
I need to take the data from CSV file,
Just push the first row data to Char field and second row data to Mean field in RFC.
FCC structure:
The source data is simple but i struck with some logic,Kindly guide me how to process this data by using FCC or we can handle by mapping.Also check the source structure whether i followed correctly.
Best Regards,
Monikandan

Hi Amit,
Exactly i need to send the entire 1st row data to CHAR Description field and 2nd row data to mean field.
While i am testing in message mapping using the source file will getting the below output
Exact output i need is Process -001,Date row data will go to CHAR field and 10000,20-02-05 row data will go to MEAN field in RFC.
How to split it.kindly guide.
Best Regards,
Monikandan.

File-to-file or File-to-RFC for Automatic PO creation and GR creation

Hi,
We are on XI 3.0 and the following has been put to me:
We will receive a .CSV file from FTP server, into XI and then need to create Purchase Orders followed by the Goods Receipt documents in R/3 based on the incoming data.
Further to this, the requirement is to give a log of the successfule and failed PO + GR document summary to the business.
The programme in R/3 will compare the incoming file nmame with archived files already processed and will reject any files with duplicate names.
I was suggesting to go with the file to RFC in R/3 whereby we can have a Z shell BAPI to include the standard BAPI for PO creation and GR creation. This Z code can then be extended to email the log to the business of which records were successfully created and which failed.
However, I am stumped as to how can I make the file duplication comparison on R/3 as the incoming file will also be stored on R/3 archive somewhere.
Can this be made when the BAPI is called in XI?
I can configure alerts when the BAPI is mapped from incoming file for that interface.
What was suggested also was to pick up the CSV file and thow it as it is in R/3 and then the Z code can go through it and create the PO and GR objects. However, then it does not make much sense to use XI as the middleware platform.
Please advice.
Regards,
Arcahna

Hi Archana,
Take a look to this blog:
https://wiki.sdn.sap.com/wiki/display/XI/Different%20ways%20to%20keep%20your%20Interface%20from%20processing%20duplicate%20files
Maybe it could help you for the duplicate files.
Regards,
Juan

File to RFC/BAPI - Async- How to capture response field value

Hi,
I am doing File to RFC/BAPI Scenario. I have Two BAPI's. THe same source xml file is mapped to the Two Target BAPI's.
For the first flow i.e File to BAPI1, I need to capture BAPI Response, field value and pass this value as Input to the BAPI2.
How do I proceed with the Mapping. I am working on PI 7.1
Any input would be Appreciated.
Thanks & Regards,
Varun

Hi Varun,
apparently you need a Business Process:
XML -> BP (asynchronous), Map to Bapi1 request structure
BP -> BAPI 1 (synchronous)
Transformations step with multi mapping merging XML and Bapi1 response to Bapi2 request structure
BP-> BAPI2
Regards,
Udo

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

File to RFC problem

Hi Friends,
I am doing a scenario CSV File to RFC. This is for SO creation in R/3 thru RFC.
I was provided with a wrapper RFC which internally calls the Sales order create BAPI.
Now my problem is When I go to SE37 and test the function module the SO is getting created but with the same data when I pass thru XI the so is not getting created. What can be the problem. Is there any authorization issue, if so tell me what auth should be given.
Vijay

Vijay,
Did you check the BAPI return parameter and what is the message you are getting. I think the problem is because of the conversion exit. I this this should be the problem R/3 expects leading zeros for vendor/customer numbers ans this is quite common error. Either change the wrapper RFC to handle this kind of values like calling the conversion routin before passing to the BAPI. This conversion routin can be foung in the domain.
Or add the leading zeros in XI mapping.
use this code in udf while mapping
int intDif, i;
String strDiff = new String();
intDif = 10 - Par_Input.length();
if(intDif > 0)
strDiff = "0";
for(i=1; i<intDif; i++)
strDiff = strDiff.concat("0");
strDiff = strDiff.concat(Par_Input);
return strDiff;
else return Par_Input;
Thanks,
Prakash

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

XML file to RFC

Hi,
i have scenario (XML file to RFC), it's by BPM, I can see XML content by file sender adapter but can't get detail field data into my data type of interface. what's wrong, please advise! Thanks!
my data type as follows,
    EXPORT Complex type
      SHIP       element
      INVOICE element
and file content as follow
<?xml version="1.0" ?>
- <EXPORT>
<SHIP>A</SHIP>
<INVOICE>ZZ12387379</INVOICE>
<?xml version="1.0" ?>
</EXPORT>

>
robert yu wrote:
> I still can't understand, Could you give me more information? Thanks!
when you receive/ process an XML....this XML has a namespace associated to it.....which in your case should be http://aaa.bbb.com/SVRFIS/Forwarder_File.....
However looking at your Payload ther is no namespace in it....so what you do is...open the Interface/Message mapping--- go to the Test tab and click on the SRC tab and then check what/ how the namespace should be or rather how the XML should be while testing...it would be something like:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Name xmlns:ns0="http://aaa.bbb.com/SVRFIS/Forwarder_File">

XML file to RFC (BAPI)

hi
can you please give the configuration steps that i have to follow while doing xml file to RFC,
1)configurations in XI part
2)configurations in R/3 part
and i am using bpm in this scenario, is there any need of "program id " while doing configurations in ID part, from where we get this programid. if you have some screnshots of this scenario, can you please forward it to me.
mailid:[email protected]
regards
Pradeep P N

hi pradeep,
no need of defining programid here...because u r using RFC as receiver...
dont define the RFC as sender....if u do so it will ask u the programid..
in u r case RFC is a receiver,so no need to define programid....
watch this
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
thanx,
krish..

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

Isssue in File To RFC Scenerio

Similar Messages

Maybe you are looking for