Issue About Org/Pos Listing

Hello Everyone,
We are using Nakisa v4.0 and a live build. I want to ask is it possible to search for an Org Unit ID/Name and get the positions assigned to that OU ? What I have done so far is first searching the standart listing's configuration so as to understand what it gets and what it returns but as far as I see, I can not link the OU search to get Position details with standart configuration. I am also reading the Admin Guide pg.207 Custom Listing (actually it's v4.1's admin guide as there is no topic called custom listing in v4.0 admin guide) to have an idea how the configuration should be.
Any suggestions, please assist..
Regards.

You would need to extend the functionality of the Position listing. This listing returns positions, but by standard you cannot search by OU ID.
The position listing uses this function module:
/NAKISA/OC_POSITION_LISTING
Regards,
Stephen

Similar Messages

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Shows all Org Structure in Org Unit Listing in Nakisa Org Chart

Hi,
We are using Org Chart 3.0SP2.
The issue is when we search the Org Units in Org Unit listing it also shows other Org Units from other org structure which does not lie inside our selected Org Structure (already given the root org unit ID in Org chart config)
But i cannot restrict the org unit listing because we cannot find any option to give root org unit ID in org unit listing configuration.
How can we restrict this Org unit listing which should show only the org units below the selected org structure.
Because already several org structure exists in back-end,but we have given one org structure (entered the root id) which we need for org chart.
Thanks,
Sakthi.

Hi Sakthi,
The search uses a listing report that pulls all active OrgUnits from HRP1000. This will include objects not within your org structure. The only way to do this is to add a data filter to the search data element that filters out these objects (e.g. filter by a short code or name). Please note that you cannot filter by the key field (ID).
Best regards,
Luke

3 issues about material determination

Hello Gurus,
there are 3 issues about material determination , I don't know how and wher to configure them .
(1) I want to choose whether or not you want to re-run material determination when the delivery is
created.
(2) I want use the some attributes in the material and customer master records to exclude a
particular material from product selection. This means, for example, that all the materials that have
been rejected in the customer master will not be included by the system when it determines a
substitution material.
(3) I want to deal with shortfall cases (in which only the available quantity is confirmed, and it is less than the order quantity) by passing the shortfall quantity on to materials planning. In this case, an additional sub-item is generated with a specifically defined material.
thanks very much!

(1) I want to choose whether or not you want to re-run material determination when the delivery is
created.
hi no need to re run the material determination
(2) I want use the some attributes in the material and customer master records to exclude a
particular material from product selection. This means, for example, that all the materials that have
been rejected in the customer master will not be included by the system when it determines a
substitution material.
hi in this case i thing this is related to listing and exclusin (for more info in search of sdn type listing and exclusion)
(3) I want to deal with shortfall cases (in which only the available quantity is confirmed, and it is less than the order quantity) by passing the shortfall quantity on to materials planning. In this case, an additional sub-item is generated with a specifically defined material.
this is possible by activating availability check and TOR transfer of requirement (for more info in search of sdn type availability check and TOR )

Issue about web analysis

Hi guys,
I am facing an issue about Web Analysis. When I use the version pre-9, I can access web analysis directly with html client or java client.Then I set each user with each POV. Now I am using EPM11, I can just access web analysis by workspace.Then if I would like to access java client, I click Tools->links->web analysis studio. While I access html client by clicking explore in the workspace toolbar. However, if the user doesn't belong to admin group, I can't find the explore toolbar. Then I can't access html client. As we know, not all web analysis users should be admin users. This issue puzzles me very much. Is there someone who can give some good suggestions? Thanks a lot.

The user needs the 'Explorer' role to see the 'Explore' button. The user does not need admin privs for this.
To access Web Analysis Studio directly, go to http://<server-name>:19000/WebAnalysis/WebAnalysis.jsp or http://<server-name>:16000/WebAnalysis/WebAnalysis.jsp.
G'luck
Andy

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Issue about IDoc Adapter Receiver Channel's Performance

Hi Everyone,
Currently, I am working on a scenario of File -Integration Process - IDoc in XI 3.0 with patch level 16. The scenario works fine when it process one/two/three files in parallel, and the IDocs arrive R/3 system quite fast. But when I try four files in parallel, the whole XI server blocks, I can not do anything even logon Integration Builder, and the IDocs arrive R/3 brokenly, sometime with the invterval to 10 minutes. When the XI comes back, I found all the four integration processes finish successfully and each transaction works fine and fast. What's more, after I change the IDoc Adapter receiver channel to a File Adapter receiver channel, it works fine for even 20 files in parallel. So I think it is some issue about IDoc Adapter receiver channel. Does anyone have the same experience as me? Any comments will be appreciate.
Regards,
Nick

Hi Nick,
Can you check this Blog-
/people/sreekanth.babu2/blog/2005/01/05/delayed-xi-message-processing
May be useful.
How are you picking the files .. You can try with EOIO options while picking the file.
But if you use BPM, it is not applicable. It will act as a EO only.
Check this SAP Note- 833740
Thanks,
Moorthy

Any known issue about running Swing application in WTS?

*{color:#0000ff}Is there any known issue about running Swing Application in Windows Terminal Server?{color}*
It is started using JWS from internet (I mean, it checks if there is an avaiable update and updates or just fun).
_*{color:#800000}+The problem is that just one machine can open the application at the same time+*_
_*{color}*_
*{color:#666699}Is there any config in java or jws to run properly several instances of the application (terminal clients)?{color}*
Edited by: Franzisk on Sep 24, 2007 6:16 PM

876587 wrote:
... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
Different environments mean just that. So something could be causing it outside java.
Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that.

Issues about Windows Azure Active Directory

issues about Windows Azure Active Directory

Hello,
Microsoft Azure forums are over here:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?category=windowsazureplatform%2Cazuremarketplace%2Cwindowsazureplatformctp
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Org Unit Listing is empty

Hi everyone,
We have the Nakisa 2.0 version, and the problem is, that the Org Unit listing doesn't work at all.
There is no result for any kind of org Unit. (by name or id).
The data connection is: BAPI_OrgUnit_SearchList
I tried it with Data filter empty and with Objecttype='O' but the result was the same.
Please Help
Thanks
N.G.

Hi Luke,
The log says:
ERROR: BAPI_OrgUnit_SearchListing_New : Source {Nakisa.SAP.Proxy}: Message {[SAPConnector.Bapi_Pdotypes_Getdetailedlist]: Error retrieving data - No objects found}
I created a test program in the R/3 system, and when I call the Function module, it returns the Org Units correctly (The FM returns an internal table with every org unit in the system.)
The BAPI_PDOTYPES_GETDETAILEDLIST is a very simple FM you just give the OBJECTTYPE parameter 'O' then it returns every org Unit int the OBJECTS table
The data connecton should be ok, because all the other connections (e.g. Employee listing) work fine.
Kind regards
N.G.

Directory - Org Unit Listing Not Returning Any Results

Hello Everyone,
We are using Nakisa v4.1 on EHP7.0 at the moment. In the user interface, Directory > Org Unit Listing is not returning any results while Employee and Position Listings are working just fine.
What would be the cause ?
Appreciate your help,
Kind regards

Hi,
I am using a live build copied from SAP_Live_RFC.
Below you can find what the cds.log says when I try to search an organizational unit.
2289. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2290. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, deneme]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2291. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=deneme , decoded= deneme
2292. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2293. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2294. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2295. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 32ms
2296. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 86ms
2297. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2298. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2299. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, test]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2300. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=test , decoded= test
2301. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2302. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2303. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 28ms
2304. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2305. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 73ms
2306. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2307. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2308. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, kalite]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2309. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=kalite , decoded= kalite
2310. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2311. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2312. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2313. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 43ms
2314. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 94ms
2315. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
Regards.

Hi am having issues with getting the list of users from the Active Director

Hi am having issues with getting the list of users from the Active Directory, can anyone help me with this!

Hi Jason,
Try this:
1. In Ultiboard select Tools>>Netlist Editor>>Pins, press the Delete button
2. Select all nets in the Select the Net to Delete dialog and then press the Delete button. This will clear all nets in the layout, don't worry all traces, parts are still on the design.
3. Go to Multisim and select Transfer>>Forward annotate to Ultiboard. This will add all nets that you removed back and it should fix the pin problem
Tien P.
National Instruments

Issues about Asus

In my previous messages, I mentioned that I was planning on buying an Asus Gaming computer (Asus G75). However, I've been reading some issues about these notebooks recently. Few of them are like unworking (is there such a word??) touchpads, freezes and shutdowns etc. What are your oppininon about the brand Asus? Spending that much money and not getting it back..does it sound familiar with Asus? Or is it only 1% of Asus users complaining about their faulty notebooks and I've been reading them? Thanks for helping

As a computer builder of 10+ years, I swear by ASUS.
As B&P said, there's going to be bad apples in any manufacturing process.
You also have to take complaints with a grain of salt; someone with a laptop without issues isn't really going to go out of their way to make a post/statement about it.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Issues about seniority

Dear experts!
Now I'm getting some issues about seniority.
- The first, I want to get number of months that employee work since employee started working in the company.
- Second, I want to move the value to wage type.
How do I do?
Help me, please.
Regards Huy!

first one
Check if there is any FM is there
or else u can check with the Stadrad report of employee Entry and Leveig report
second one
wht value u want to move the wage type can u be some more clear

Issue About Org/Pos Listing

Similar Messages

Maybe you are looking for