Issue accessing 5GHZ channel WRT610N to uverse

Not sure if anyone has encountered this issue, I connected my dual band WRT610N to uverse router. I disabled the wireless feature on the Att 3801hgv router and now use linkys router. Both 2.4GHz and 5GHz network can be seen however I am only able to connect 2.4Ghz channel. see setting below i am using. Hope someone can help.

Make sure that there's no IP address conflict between the two routers. If you cascade the routers and set the WRT610N as an access point then you need to disable the DHCP server of the Linksys router. You may use Linksys KB article 3733 to guide you.

Similar Messages

Airport Extreme 5GHz Channel not available

Hi All
My Airport Extreme 5th Gen is now up and running.
The issue I have is that unless I give the 5GHz channel it's own name, my MacBook Pro will not pick it up - instead opting for the 2.4GHz channel. I know that distance and obstacles are a factor but in a test situation the MacBook is only a metre away from the Airport. If I give the 5GHz channel it's own name then I can select the 5GHz network and confirm the connection rate - this also works with Windows 7 machine in the same position with the signal strength being 'excellent'. So why when I have the same name for both channels will my machines only pick up the 2.4GHz signal?
Using two names would be okay exept that when I do this the 2.4GHz network slows completely and is unusable.
Last week I had a pretty good setup with an old Airport Extreme and now with the new 5th Gen unit I can either connect two machines at 5GHz or four machines at 2.4GHz - not a mixture of both. So basically I'm no better off than with my eight year old Airport Extreme.
I'm beginning to think that there is a defect with the new Airport Extreme unit - is there any simple checks I can do on the unit to confirm that it is operating correctly?
I'd really appreciate any help with this.
Phil

Update: Solved. I reset the Airport Extreme a number of times in succession and finally it just worked - not sure what the problem was.

E2500 2.4GHz and 5GHz Channels

Hi guys / gals,
I've recently purchased the E2500, done the setup but am facing some issues.
I'm unable to see the 5GHz channel SSID, I can only see the 2.4GHz channel SSID.
Have tested all the laptops and devices at home and all can't see the 5GHz channel.
The list of devices are:
a) iPhone 3GS
b) iPhone 4G
c) iPhone 4GS (some sites says it doesn't support, some says it does, I'm confused as a result)
d) Samsung laptop
e) Dell laptop
f) Momo11 Little Bird Edition tablet (Made in China [MIC])
g) No name MIC tablet
Secondly, is there any tips / tricks to tweak the modem to increase the internet speed?
Appreciate whatever assistance you could provide.
Thanks in advance.
Daryll

First, with the above devices you must have a 5Ghz capable wireless adapter in order to see a 5Ghz signal. Verify which devices above have a 5Ghz adapter installed. This means it must be 802.11 a/b/g/n cabable, not just b/g/n.

5GHz channels no longer available after upgrading to 10.7.3

I'm currently using Late-2009 iMac and for some reason after upgrade to 10.7.3 I couldn't connect to any 5GHz network at all. In the System Profiles, Wi-Fi menu now says:
Interfaces:
en1:
Card Type:          AirPort Extreme (0x168C, 0x8F)
Firmware Version:          Atheros 9280: 4.0.61.4-P2P
MAC Address:          04:1e:64:ec:f6:e2
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
which now lacks the upper channels previously supported (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165); I wonder if this is intentional, if so, for whatever reason did Apple decided to disable 5GHz support for this particular build (which previously worked flawlessly)

Interesting. If you can still connect via wired (or 2.4GHz wireless), I would download the 10.7.3 combo update from apple support and reapply it. It appears the driver and family did not fully install with the update.
You can get the update here:
http://support.apple.com/kb/DL1484
If you re-install the combo update and you still do not have 5GHz channels, please open the System Information tool and post all of the text you see on the right for WiFi. E.g.:
Software Versions:
CoreWLAN:          2.1.2 (212.1)
CoreWLANKit:          1.0.2 (102.2)
Menu Extra:          7.0.2 (702.1)
configd plug-in:          7.1.2 (712.1)
System Profiler:          7.0 (700.3)
IO80211 Family:          4.1.2 (412.2)
WiFi Diagnostics:          1.0.1 (101.1)
AirPort Utility:          6.0 (600.92)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x168C, 0x9A)
Firmware Version:          Atheros 9380: 4.0.61.4-P2P
MAC Address:          10:9a:dd:9e:a9:96
Locale:          FCC
Country Code:
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:          Supported
AirDrop:          Supported
Status:          Network Service Inactive

Can not access communication channels

We could not access Communication channel & other configuration objects
from integration builder and we are getting the following error,
Attempt to access application REPOSITORY using Http Method Invocation
(HMI) failed. Detailed information: Invoking ROA method "ReadObjects"
via HMI ... FAILED due to following exception: Message: Connection to
system REPOSITORY using application REPOSITORY lost. Detailed
information: Error
accessing "http://<host>:50300/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 302,
response message is "Found" Stacktrace:
com.sap.aii.utilxi.hmi.api.HmiCoreException: Connection to system
REPOSITORY using application REPOSITORY lost. Detailed information:
Error
accessing "http://<host>:50300/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 302,
response message is "Found" at
com.sap.aii.utilxi.hmi.api.HmiCoreException.newCommunicationError
(HmiCoreException.java:83) at
com.sap.aii.utilxi.hmi.api.HmiHttpClientImpl.sendRequestAndReceiveResponseViaHttp(HmiHttpClientImpl.java:195) at
com.sap.aii.utilxi.hmi.api.HmiHttpClientImpl.sendRequestAndReceiveResponse(HmiHttpClientImpl.java:105) at
com.sap.aii.utilxi.hmi.api.HmiClientAdapter.invokeMethod
(HmiClientAdapter.java:88) at
com.sap.aii.ib.core.roa.RoaServiceImpl.readObjectsImpl
(RoaServiceImpl.java:198) at
com.sap.aii.ib.core.roa.RoaServiceImpl.readObjects
(RoaServiceImpl.java:329) at
com.sap.aii.ib.server.cpa.AdapterMDCache.readObject
(AdapterMDCache.java:219) at
com.sap.aii.ib.server.cpa.AdapterMDCache.actualize
(AdapterMDCache.java:209) at
com.sap.aii.utilxi.misc.api.LRUMapBasedCache.get
(LRUMapBasedCache.java:34) at
com.sap.aii.ib.server.cpa.AdapterMDCache.get(AdapterMDCache.java:171)
at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40) at
com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40) at
com.sap.aii.ib.sbeans.misc.MiscServicesBean.getAdapterMetadata
(MiscServicesBean.java:238) at
com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl1_0.getAdapterMetadata(MiscServicesRemoteObjectImpl1_0.java:2028) at
com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl1_0p4_Skel.dispatch(MiscServicesRemoteObjectImpl1_0p4_Skel.java:285) at
com.sap.engine.services.rmi_p4.DispatchImpl._runInternal
(DispatchImpl.java:320) at
com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request
(P4SessionProcessor.java:129) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41) at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method) at
com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100) at
com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Our Internal investigation reveals that the URL
http://<host>:50300/rep/remoteobjectaccess/int?container=ejb is redirecting the requester to HTTPS and Integration
builder is not able to handle the redirection. We tried to login to the
above url in HTTPs and it does not work. There is no service user
locked in the system.
We are not even able to access exchangeProfile throught HTTP http://<host>:50300/exchangeProfile. But we could access exchange profile parameters from ABAP system using the function module EXCHANGE_PROFILE_GET_PARAMETER
Have anyone encountered this problem before?
Regards,
Arul

Try using any other user id like PIISUSER and check?
---Satish

How to access single channels of multichannel acquisition?

I want to access single channels of a multichannel acquisition in the Getting Started Analog Input.vi
The purpose of this is to analyse i.e. do Min-Max or FFT on the individual channels. Can somebody help me to unbundle the data? Why does AI Read give Scaled Data while in other vi Waveform data?

Hi,
Getting Started Analog Input.vi uses AIRead.vi to read data from your hardware.
1. This is from the help about AIRead.vi:
"scaled data is a 2D array that contains analog input data in scaled data units. The data appears in columns, where each column contains the data for a single channel."
So to access the single channel you must use "Functions->Array->Index Array.vi" to get data from your 2D array. All you need is to wire your 2D array to this VI and the specified number to the "column" input node.
2. To change the Data type of array you receive from hardware you have to right-click on the AIRead.vi and choose any of 4 options (Binary Array, Scaled and Binary Arrays, Scaled Array, Waveform) from "Select Type" sub-menu.
Good luck.
Oleg Chutko.

WRT600N Network Dropouts on 5Ghz Channel with WPA-2

I've got a WRT600N using WPA-2 Personal on the 5Ghz channel. Whenever I try to upload something from my machine to a NAS attached by ethernet to the device I lose the wireless connection. This doesn't happen if I turn encryption off, or if I'm uploading to something on the Net, only a device connected to the ethernet port. It doesn't matter whether I use zero config or Intel Proset. It doesn't seem to matter whether it's the NAS or any other device connected to ethernet port. The same problem happens with every variation of WPA. It's fine if I connect to the 2.4Ghz channel.
I've upgraded to the lastest firmware for the router (1.01.35 build 5) and NAS as well as the latest driver for the intel wireless card. I'm using all the default settings on all the devices.
Does anyone have any ideas why this might be happening with WPA, other settings I could try, anything that might help.

I just used the download - this is on a Vista 32 machine but drivers are available for Vista 64 - http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=117523973773....
It's been running fine for the past few months although the router sometimes loses the 5GHz network and I have to restart it. We were away until yesterday and the WUSB600 has been dropping the wireless connection a few times.

AirPort Utility in Windows - cannot set 5GHz channel manually

I am trying to manually set my 5GHz channel to something other than automatic. I change it to
and click the update button. The router restarts and my changes do not stick. It now shows
The 2.4GHz channel can be modified but not the 5GHz. Anyone have any ideas?
Thanks.

So are you saying that it does not work with v6 on an Apple product either?
That is the info I have at this point in time. I have totally avoided AC models.. I think they are poor cf the same chipset models available from Asus or Netgear that have real GUI setups with real functionality.
Is there functionality that is available in the Mac version but not in the Windows version?
The v5 utility in Mac and PC was the same functionality..
The v6 utility in Mac and never released for PC has far less functionality. Which is designed I guess to correspond to the new model Apple routers which also have less functionality. For instance there is no longer a log function you can use. Apple do not believe in functionality.. it is supposed to be as near to self setting as possible.. the ideal would be purely automatic and no airport utility. Apple are slowly working towards their nirvana.
Why has Apple neglected to update the Windows version? Looks like the Windows version 5.6.1 (Post Date: Jun 11, 2012) is a year older than the Mac version (Post Date: Jul 11, 2013).
Apple do not reveal info like this.. but my guess is they produced an iOS version so they figured if you don't have a Mac then surely you own an iphone or ipad.. if not you should buy one.

HT204088 anyone have any issues accessing security in sys pref? Mountain Lion

Does Anyone else have an issues accessing the Security/Password in System Preferences of the Mountain Lion OS. I have just upgraded this morning and got a message about not being able to access a site. It appears Moutain Lion has changed the security of accessing sites and need to be adjusted ot suit your needs. The problem is I can't access it. The Security icon is the only one of the icons in the system preference that hangs and I am forced to quit.
Any one else have this issue?

I'm not sure this will help. There is supposed to be a "Security and Privacy" preference pane in System Preferences. But on my MacBook Pro, there is no such pane visible. However, if I do a search in System Preferences for "Security and Privacy", the preferences open. So it's "there" but not visible. I don't know why.
However, if you try this and manage to get into Security and Privacy via searching in System Preferences, you might be able to do what you want.

Issues accessing my iTunes library

I have recently reinstalled my Windows OS however am having issues accessing my library. I have reinstalled the new iTunes software and cannot see my previous songs that were stored in my library only some of them appear. Can someone please explain my issue and how to workaround this? thanks.

Hi - thanks for your reply
The only songs we can view in our Itunes library all seem to be songs purchase from itunes. (approx 60-70)
When we click on 'our ipod' button all the songs we have ever added to the ipod, (in excess of 600!) whether from a CD, or itunes are greyed out... so we are little stuck as to how we get them to appear in our itunes library.
Could you let me know how you start the scan and get it to loaded back into the librabry at all please?
Thanks,
Pip

Error -50103 when I am trying to access two channels on USB 6366 board in the same time

I am trying to use two DAQmx tasks attempting to access two channels from
USB-6366 in the same time. But it gives me an error Error -50103. So I looked
online and find out it says ' It is not possible to have multiple DAQmx tasks
attempting to access the same physical device. '. So I am wandering how can
collect data from my ai0 and ai1 channels in the same time? Here is my code,
and please help me out. Thanks very much
Attachments:
error_-501013.vi ‏27 KB

Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

E3000 / 5GHz Channel

I can't get any of my wireless devices to see the 5GHz channel. Anyone else having this problem? I know my XBOX 360 S and laptop are capable of seeing this channel. I've upgraded my router to the latest firmware (just released) and did the 30-30.30 procedure for the firmware upgrade.
I'm beginning to think I have a faulty router as a technician couldn't help resolve the problem on previous firware.
Any suggestions?

According to one of Atheros' driver support links for the AR5B93 it is 5GHz compatible:
http://www.atheros.cz/download.php?atheros=AR5B93&system=1
The search link on google has 5GHz in description: http://www.google.com/search?q=Atheros+AR5B93+driver&sourceid=ie7&rls=com.microsoft:en-us:IE-SearchB...=

Connect MacbookPro and AirPort Extreme via 5Ghz channel

Hi.
I have three Apple devices:
- Macbook Pro 13" 2012 year (802.11n wi-fi standart)
- iPad mini with Retina 2013 year (802.11n wi-fi standart)
- Airport Extreme 2013 year (with support 802.11ac wi-fi standart)
By default, a macbook device connected to the channel 2.4Ghz. Connection speed is set 217 Mbit/sec. If you divide the channels 5Ghz and 2.4Ghz, then the connection speed to 450 Mbit/sec on channel 5Ghz.
How to configure AirPort Extreme when macbook and iPad was connected to the AirPort using 5Ghz channel by default?
Gennadiy.

Hi Bob
So, I did some experiments with Macbook and two router:
- ASUS N66U
- Airport Extreme 2013
Note the parameter Transmit Rate.
Software Versions:
          CoreWLAN: 4.0 (400.45.1)
          CoreWLANKit: 3.0 (300.35)
          Menu Extra: 9.0 (900.34)
          System Information: 9.0 (900.8)
          IO80211 Family: 6.0 (600.34)
          Diagnostics: 3.0 (300.37)
          AirPort Utility: 6.3.2 (632.3)
1. Macbook Pro + ASUS N66U (5Ghz, 36.1 channel)
Card Type: AirPort Extreme (0x14E4, 0x10F)
          Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.22)
          MAC Address: 20:c9:d0:7a:28:57
          Locale: RoW
          Country Code: EU
          Supported PHY Modes: 802.11 a/b/g/n
          Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48
          Wake On Wireless: Supported
          AirDrop: Supported
          Status: Connected
          Current Network Information:
            Gennadiy_Home:
              PHY Mode: 802.11n
              BSSID: 74:d0:2b:42:ad:f4
              Channel: 36,1
              Country Code: EU
              Network Type: Infrastructure
              Security: WPA2 Personal
              Signal / Noise: -56 dBm / -86 dBm
              Transmit Rate: 450
              MCS Index: 23
2. Macbook Pro + Airport Extreme without separate 2.4 and 5Ghz network. Macbook connected over 2.4Ghz on 11 channel
Card Type: AirPort Extreme (0x14E4, 0x10F)
          Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.22)
          MAC Address: 20:c9:d0:7a:28:57
          Locale: RoW
          Country Code: BY
          Supported PHY Modes: 802.11 a/b/g/n
          Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
          Wake On Wireless: Supported
          AirDrop: Supported
          Status: Connected
          Current Network Information:
            Gennadiy_Home:
              PHY Mode: 802.11n
              BSSID: 90:72:40:1c:35:c4
              Channel: 11
              Country Code: BY
              Network Type: Infrastructure
              Security: WPA2 Personal
              Signal / Noise: -69 dBm / -87 dBm
              Transmit Rate: 117
              MCS Index: 14
3. Macbook Pro + Airport Extreme with separate network. Macbook connected over 2.4Ghz on 11 channel
Card Type: AirPort Extreme (0x14E4, 0x10F)
          Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.22)
          MAC Address: 20:c9:d0:7a:28:57
          Locale: RoW
          Country Code: BY
          Supported PHY Modes: 802.11 a/b/g/n
          Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
          Wake On Wireless: Supported
          AirDrop: Supported
          Status: Connected
          Current Network Information:
            Gennadiy_Home:
              PHY Mode: 802.11n
              BSSID: 90:72:40:1c:35:c4
              Channel: 11
              Country Code: BY
              Network Type: Infrastructure
              Security: WPA2 Personal
              Signal / Noise: -70 dBm / -86 dBm
Transmit Rate: 130
              MCS Index: 15
4. Macbook Pro + Airport Extreme with separate network. Macbook connected over 5Ghz on 36.1 channel
Card Type: AirPort Extreme (0x14E4, 0x10F)
          Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.22)
          MAC Address: 20:c9:d0:7a:28:57
          Locale: RoW
          Country Code: BY
          Supported PHY Modes: 802.11 a/b/g/n
          Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
          Wake On Wireless: Supported
          AirDrop: Supported
          Status: Connected
          Current Network Information:
            Gennadiy_Home_5G:
              PHY Mode: 802.11n
              BSSID: 90:72:40:1c:35:c5
              Channel: 36,1
              Country Code: BY
              Network Type: Infrastructure
              Security: WPA2 Personal
              Signal / Noise: -79 dBm / -86 dBm
              Transmit Rate: 81
              MCS Index: 4
As a result we have bad results in tests 2-4. Particularly upset that Airport Extreme loses Asus N66U on test results. If I change regional setting to RU (Russian), results does not change:
Card Type: AirPort Extreme (0x14E4, 0x10F)
          Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.22)
          MAC Address: 20:c9:d0:7a:28:57
          Locale: RoW
          Country Code: RU
          Supported PHY Modes: 802.11 a/b/g/n
          Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 132, 136, 140, 149, 153, 157, 161, 165
          Wake On Wireless: Supported
          AirDrop: Supported
          Status: Connected
          Current Network Information:
            Gennadiy_Home:
              PHY Mode: 802.11n
              BSSID: 90:72:40:1c:35:c4
              Channel: 11
              Country Code: RU
              Network Type: Infrastructure
              Security: WPA2 Personal
              Signal / Noise: -69 dBm / -86 dBm
              Transmit Rate: 130
              MCS Index: 15
Bob, how can you comment on these results?

Does OS X prefer 5Ghz channel 36 than others?

AirPort Time Capsule latest version.
Wireless AC.
Those 5Ghz channels, which one usually gives highest speed? I have tested few, I felt channel 36 seemed to have highest speed than channel 52 or 100 or 149, but channel 36 looks very crowded, many neighbour 5Ghz are around this channel while channel 100 / 149 are not used by any neighbours.
Is that true that OS X prefers channel 36 than others?

Every time the computer goes to sleep the actual settings will change..
When it wakes up the wireless is likely to be different..
Please do give me the link speeds.. Not the actual throughput.
I have to say everyone here probably thought you were talking about link speed.. but I see you are talking about actual throughput.
I refuse to update to Yosemite.. but the command should still be to hold down option key whilst you click on the wifi symbol.
This gives a bunch of useful info.
Give me this screenshot using 36 and using 149.. give it to me if it changes like on waking the computer.. or when you have started transferring files.
The other place to get the info is wireless diagnostics.. which is listed at the bottom..
You can get a lot of info out of the utility.. it however is different on yosemite.
The major spike on the curve of signal and SNR is when I changed over channels.. do this and mark what the changes are.. or do a separate graph for each one.
As a final note..
538 on 36 vs 500 on 149 I would count as error margins of any test... that is less than 10% difference.. And these tests are not proof one way or the other of wireless .. it can be internet or router or congestion..
If you want accurate indications you must use iperf in your own network.. not to the internet.

Issue accessing smb share on Imac os x 10.7

I am have some issues accessing our company smb share. The problem i am having is that when i click on a folder it does not show any content, but if i eject the network drive and reattach it it works.

try this:
(run this in Terminal.app, replace <YOUR_DROPBOX_FOLDER>)
rm <YOUR_DROPBOX_FOLDER>/.dropbox.cache/dropbox-upgrade-3.4.3.tar.bz2
curl -L -o /tmp/Dropbox-darwin-update-3.2.9.tar.bz2 'https://www.dropbox.com/download?plat=mac&meta=1&build=3.2.9'
mv /Applications/Dropbox.app /Applications/Dropbox_backup.app
mkdir -p /Applications/Dropbox.app/Contents
tar -C /Applications/Dropbox.app/Contents -xjf /tmp/Dropbox-darwin-update-3.2.9.tar.bz2
chflags -R uchg /Applications/Dropbox.app
rm -r ~/Library/Application Support/Dropbox/Dropbox.app
chflag uchg ~//Library/Application Support/Dropbox
sudo dot_clean /Library/DropboxHelperTools
(system password might be asked after last command. Type Your password and press Enter. Letters of the password won't be displayed while typing)
some explanation, and future changes when more problems arise:
https://gist.github.com/peter-kolenic/7718b6d75a13c17effd0

Issue accessing 5GHZ channel WRT610N to uverse

Similar Messages

Maybe you are looking for