Issue: admin activity is not fully logged to syslog
Hello!
cisco 7606, IOS 12.2(33r)SRC3
For exalmple, while activating ipv6 bgp session, when entering command:
#neighbour 2001:7F8:S:FF::109 password PASSWD
Syslog gets such an entry:
Wed Oct 10 14:20:00 2011 router1 admin syslogserv stop cmd=neighbor password *****
I wonder, why neighbor's IPV6 address is not present in the entry. It makes some difficulties in account activity monitoring.
#sh run
<cut>
logging buffered 2000000
logging console errors
logging monitor errors
aaa authentication username-prompt "login: "
aaa authentication login default group tacacs+ line enable
aaa authentication login CONSOLE line none
aaa authorization exec default local group tacacs+ if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa session-id common
logging event link-status default
<cut>
WBR, Alex.
Hi Lawrence ,
Yes, I have the answers for your questions, please find the same below.
1 ) No , I haven't got any 'weblogic.application.ModuleException' at the server or stdout log.
2 ) While trying to telnet from my window maching, It is not connected to my server.
C:\Documents and Settings\Administrator>telnet 20.10.5.2 7001
Connecting To 20.10.5.2...Could not open connection to the host, on port 7001: Connect failed
C:\Documents and Settings\Administrator>
3 ) Yes, I have flushed the cache , tmp folder by taken backup of the domain folder and then restarted the weblogic - but no luck , Still not able to accessible.
Hope , Second question & answer will be the cause for the issue ( But not sure Why it was accessing from the same windows machine earlier ? ).
Please suggest... Thanks!
Similar Messages
-
I am having an issue with active sync not working. I am looking for updates from my resource every 5 minutes for changes. My enviornment is such:
IdM Version 5
App server: Weblogic 8.1.6
IdM is looking at AD (2003) for changes.
My log files look like such:
2007-02-06T13:20:07.794-0500: Started, paused until Tue Feb 06 13:25:00 EST 2007
2007-02-06T13:25:00.049-0500: Pause completed
2007-02-06T13:25:00.095-0500: Polling
2007-02-06T13:25:00.111-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:25:01.064-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:25:07.767-0500: Poll complete.
2007-02-06T13:25:07.767-0500: SARunner: loop 263
2007-02-06T13:25:07.814-0500: Started, paused until Tue Feb 06 13:30:00 EST 2007
2007-02-06T13:30:00.053-0500: Pause completed
2007-02-06T13:30:00.068-0500: Polling
2007-02-06T13:30:00.084-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:30:01.240-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:30:08.021-0500: Poll complete.
2007-02-06T13:30:08.021-0500: SARunner: loop 264
2007-02-06T13:30:08.084-0500: Started, paused until Tue Feb 06 13:35:00 EST 2007
2007-02-06T13:35:00.057-0500: Pause completed
2007-02-06T13:35:00.088-0500: Polling
2007-02-06T13:35:00.104-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:35:01.229-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:35:08.166-0500: Poll complete.
2007-02-06T13:35:08.166-0500: SARunner: loop 265
2007-02-06T13:35:08.197-0500: Started, paused until Tue Feb 06 13:40:00 EST 2007
2007-02-06T13:40:00.030-0500: Pause completed
2007-02-06T13:40:00.030-0500: Polling
2007-02-06T13:40:00.045-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:40:01.014-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:40:07.795-0500: Poll complete.
When I run these search filters I get results from my AD. When IdM runs the search they are coming back blank. Any ideas?
Thanks,
ChrisIf you have changed environments... or for some other reason, your USN number on the AD resource could be lower than the number passed in the query.
Manually edit a user in AD, and then check the USN number of the object. See if it is lower then the query is passing. If so, you can manually edit the IAPI_ResourceName configuration object and alter the USN number passed in the query. -
Urjent:Partition error:Logging out user [Admin], active for 0 minutes
Hi all,
Iam using 11
Wen iam creating Transaparent partition its validating successfully , but wen iam saving it its giving error , partition creation failed
Error: 1051037: Logging out user [Admin], active for 0 minutes
and it s giving error reading ddb file
i tried with maxl also but it continiously running for 30 mints , its horrible , actually it takes 2 mints
how can i resolve this issue, any help would be appriciated
thanks
Edited by: user8815661 on 26 avr. 2010 05:18
Edited by: user8815661 on 27 avr. 2010 04:00
Edited by: user8815661 on 3 mai 2010 04:18Sounds like there is some sort of ddb file corruption. There are many causes, but the quickest fix I have found is usually a file-based deletion of the ddb file on both the source and target side of this partition. The attempt to create a partition on this database will cause a new ddb file to be created. Of course, this is dangerous. You can't have any other partitions on either the source or target side...or they will be deleted by this step. But the only purpose of the ddb file is for partition definitions, and it exists on both source and target.
I've found this happens if one side of a partition (one of the ddbs from source or target) gets the file deleted, or communication is down between the source database server and target database server. -
Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results. -
Wondering if any one here have had issues with their Activity app stopping from logging data? On my 38mm Sport model SG, after a week of faultless use, today I noticed that it has stopped consistently logging activities. This morning it did log for an hour or so and none since (evening now). Have tried flicking all the options on and off, rebooting the watch and now finally resetting the watch. Still not logging.
Any idea what could be issue? Anyone else having the same?It should have been installed when you first paired your watch BUT it might be on the last screen. That is what a lot of folks have seen - myself included - it is put on the last screen, sometimes all by itself.
-
Account locked out events are not getting in active directory security event logs
Account locked out events are not getting in active directory security event logs for some users. I can see that the user is locked and when i tried to find out the event in sec log at DC but couldnt able to find. It is only happening for some users.
not for the all users.In addition.
Check the ADDS Audit.
Active Directory Services Audit - Document references
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers -
When trying to sign in to Face Time, I continually get "Face time Activation" "Could not sign in. Please check your network connection and try again". I am able to access the internet via Safari, so my network connection seems to be working. What am I doing wrong, and how can I access Face Time?
Hey sklingen,
Thanks for the question. I understand you are experiencing issues signing into FAceTime. The following article may help to resolve your issue:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
When occurs crash recovery,why use active online redo log not archived log?
If current redo log had archived, but it's still 'ACTIVE'. As we all know, archived log is just an archived copy of the current redo log which is still 'ACTIVE', they have the same data. But why use active online redo log not archived log for crash recovery?(I think, if crash recovery can use archived log, then whether the online redo log is 'ACTIVE' or not, it can be overwritten)
Quote:
Re: v$log : How redo log file can have a status ACTIVE and be already archived?
Hemant K Chitale
If your instance crashes, Oracle attempts Instance Recovery -- reading from the Online Redo Logs. It doesn't need ArchiveLogs for Instance Recovery.
TanelPoder
Whether the log is already archived or not doesn't matter here, when the instance crashes, Oracle needs some blocks from that redolog. Archivelog is just an archived copy of the redolog, so you could use either the online or achive log for the recovery, it's the same data in there (Oracle reads the log/archivelog file header when it tries to use it for recovery and validates whether it contains the changes (RBA range) in it what it needs).Aman.... wrote:
John,
Are you sure that the instance recovery (not the media recovery) would be using the archived redo logs? Since the only thing that would be lost is the isntance, there wouldn't be any archived redo log generated from the Current redo log and the previous archived redo logs, would be already checkpointed to the data file, IMHO archived redo logs won't participate in the instance recovery process. Yep, shall watch the video but tomorrow .
Regards
Aman....
That's what I said. Or meant to say. If Oracle used archivelogs for instance recovery, it would not be possible to recover in noarchive log mode. So recovery relies exclusively on the online log.
Sorry I wasted your time, I'll try to be less ambiguous in future -
Isl msg, "Trunk Not Fully Active"
Where can I look up what this means and what actions to take to correct? This msg is in FMS.
# sh port-channel database
port-channel 2
Administrative channel mode is active
Operational channel mode is active
Last membership update succeeded
First operational port is fc1/14
2 ports in total, 2 ports up
Ports: fc1/6 [up]
fc1/14 [up] *"vsanMismatchIsolation
This VSAN is not configured on both sides of a trunk port."
This is hard to find, you have to use DM and dig down in the trunk config. There you find the real msg that can be looked up in the fm.pdf, pg 1249... It shouldn't be this hard, why is this msg about "Trunk not fully active" provided with no supporting docs. -
Imessage activation could not sign in - Issue
Iphone 4s,
Error - imessage activation could not sign in please check your network connection
Updated the new IOS 8.1.1 a few days back and this error keeps coming up when I try to sign in and activate i messages, it's been like this for a few days now and I've tried all the suggestions mentioned, any ideas?
CheersThis may sound silly but after trying loads of different things I noticed I made one mistake in the advice in a previous thread.
If i message and face time do not work and you can't sign in to i message with your id and pw try the below in this order, I tried it in different sequence and it didnt work. So try exactly as is below.
1) turn off i messages in the settings-> Messages menu
2) turn off face time in settings -> Face time menu
3) Turn off phone
4) leave phone off for one minute(not sure if this length of time matters but worked for me so)
5) Turn on phone
6) Check that i messages and face time automatically turned themselves on again and you should now be able to use your messages & face time.
Hope this can help someone else at some stage.
Good Luck. -
my mac book pro with retina display is not gtting log in prompt. back apple logo is glowing and screen also glowing in dim but i am get getting login prompt
Gray screen at start up?
http://support.apple.com/en-us/TS2570 -
Some news web sites will not fully load. MSNBC will only show the head line and advertisers. CNN and Fox show a text only version with very limited pictures and the same for . Durdge report loads fully as will the Chicago Trib. seems like only certain news sites are subject to this partial display. have not seen this on commercial sites.
Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
Test for the problem
Also see: [[Websites look wrong]] and [[Troubleshooting Extensions and themes]] -
SMS_NOTIFICATION_SERVER process Active Transaction preventing SQL log file backup
Hello,
I have been working on adding a few thousand machines into our SCCM 2012 R2 environment. Recently after attaching several of these systems there was a spike in activity in the transaction log due to the communication and inventory of these new
machines. The log file would fill up quickly but the log file backup would not function and allow the reuse of the log file. Upon investigation by my DB Admin we noticed that the SMS_NOTIFICATION_SERVER process was holding open an Active Transaction
that would last 1 hour and then restart at the end of the hour. This process was essentially preventing the backup of the log file. In a test, I briefly turned off the SMS_NOTIFICATION_SERVER process and we noticed the transaction log file functioning
correctly. I have included a screen shot of the process in the SQL Activity Monitor. Has anyone experienced this issue and resolved it? Is there anyway to reduce the 1 hour time frame or change the behaviour so that the process releases the
log file for backup if the log is getting full?
Regards,
DaveWe had it in Simple only briefly yesterday when working on the issue. It is in Full recovery mode.
-
Unable to retrieve topology component health states. This may be because the admin component is not up and running.
I have deleted Search Service App and created again.
But still same error can anyone give me check list.. I need it very urgently.
Please reply
Thanks
RajHi Raj,
This issue can be caused by many reasons, so please check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Here are some similar issues and the corresponding solutions for you take a look:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
http://blogs.msdn.com/b/sambetts/archive/2013/08/28/sp2013-win2012-unable-to-retrieve-topology-component-health-states-this-may-be-because-the-admin-component-is-not-up-and-running.aspx
http://techtrainingnotes.blogspot.com/2013/09/unable-to-retrieve-topology-component.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
SOA server not starting - log attached
These are the messages I see in the log :
<Sep 29, 2011 3:11:47 PM IST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://HGUDIKAN-pc:7001.>
<Sep 29, 2011 3:11:47 PM IST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
Logs:
<Sep 29, 2011 3:11:47 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 29, 2011 3:11:47 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 29, 2011 3:11:48 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 29, 2011 3:11:48 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log00004. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log.>
<Sep 29, 2011 3:11:48 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
<Sep 29, 2011 3:11:55 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 29, 2011 3:12:14 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 29, 2011 3:12:14 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
bpel.fatal.conection.max.retry is set to 3
INFO: FaultPoliciesParser.<init> ------->Constructed Policy parser
DiagnosticService java logger init
DiagnosticService finish
<Sep 29, 2011 3:24:06 PM IST> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <J2EE JMX-46041> <The resource for bundle "oracle.soa.management.config.bpel.mbeans.MessageBundle_en" with key "oracle.soa.BPELConfigBean.auditFlushEventThreshold" cannot be found.>
<Sep 29, 2011 3:24:06 PM IST> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <J2EE JMX-46041> <The resource for bundle "oracle.soa.management.config.bpel.mbeans.MessageBundle_en" with key "oracle.soa.BPELConfigBean.auditFlushByteThreshold" cannot be found.>
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/Oracle/MIDDLE~1/USER_P~1/domains/BASE_D~1/config/fmwconfig/default-keystore.jks
INFO: SSLSocketFactoryManagerImpl.getKeystorePassword Obtained null or empty keystore password
INFO: SSLSocketFactoryManagerImpl.getKeyPassword Obtained null or empty key password
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Could not obtain keystore location or password
Initializing logs...Ok
Initializing UploadDir...Ok
Initializing PAPI services...Ok
Initializing Renderer Components...Ok
Loading Preference Migrators...Ok
********* WorkSpace was initialized successfully *********
ADF Library non-OC4J post-deployment (millis): 891
<Sep 29, 2011 3:24:46 PM IST> <Warning> <oracle.soa.services.notification> <BEA-000000> <<.> Notification via email, voice, SMS or IM will not be sent. If you would like to enable them, please configure corresponding sdpmessaging driver. Then modify the accounts and set NotificationMode attribute to either NONE, EMAIL or ALL in workflow-notification-config.xml>
<Sep 29, 2011 3:24:58 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 29, 2011 3:24:58 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Sep 29, 2011 3:25:01 PM IST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 29, 2011 3:25:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.178.38.206:8001 for protocols iiop, t3, ldap, snmp, http.>
<Sep 29, 2011 3:25:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:8001 for protocols iiop, t3, ldap, snmp, http.>
<Sep 29, 2011 3:25:09 PM IST> <Notice> <WebLogicServer> <BEA-000357> <Started WebLogic Independent Managed Server "soa_server1" for domain "base_domain" running in Development Mode>
<Sep 29, 2011 3:25:09 PM IST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 29, 2011 3:25:15 PM IST> <Warning> <EJB> <BEA-010081> <The message-driven bean CubeActionMDB was configured to use a JMS Topic, requires container-managed transactions, and uses a foreign JMS provider. Only one thread will be used to receive and process all messages.>
<Sep 29, 2011 3:25:15 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 29, 2011 3:25:15 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/Oracle/MIDDLE~1/USER_P~1/domains/BASE_D~1/config/fmwconfig/default-keystore.jks
looking up version 11.1.1.3.0
SchemaVersion actual dbVersion=11.1.1.3.0, expected dbVersion=11.1.1.3.0
<Sep 29, 2011 3:25:56 PM IST> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
<Sep 29, 2011 3:25:59 PM IST> <Error> <oracle.bpm.services.organization> <BEA-000000> <Exception
exception.70692.type: error
exception.70692.severity: 2
exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.
ORABPEL-10585
Service error.
Internal Error; Service error occurs in JpsProvider in method getIdentityStore().
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:335)
at oracle.tip.pc.services.identity.jps.JpsProvider.init(JpsProvider.java:308)
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store.
at oracle.security.jps.internal.idstore.util.IdentityStoreUtil.getIdentityStoreFactory(IdentityStoreUtil.java:161)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmFactory(AbstractIdmIdentityStore.java:160)
>
<Sep 29, 2011 3:25:59 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <Exception BPM-70692
Exception
exception.70692.type: error
exception.70692.severity: 2
exception.70692.name: Error while granting BPMOrganizationAdmin role to SOAOperator.
exception.70692.description: Error occured while granting the application role BPMOrganizationAdmin to application role SOAOperator.
exception.70692.fix: In the policy store, please add SOAOperator role as a member of BPMOrganizationAdmin role, if it is not already present.
at oracle.bpm.bpmn.engine.runtime.DeploymentDescriptorUtil.grantBPMOrganizationAdminRoleToSOAOperator(DeploymentDescriptorUtil.java:317)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.stateChanged(BPMNServiceEngine.java:584)
Caused By: ORABPEL-10585
Service error.
Internal Error; Service error occurs in JpsProvider in method getIdentityStore().
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.tip.pc.services.identity.jps.JpsProvider.getIdentityStore(JpsProvider.java:335)
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store.
>
INFO: FabricProviderServlet.stateChanged SOA Platform is running and accepting requests
<Sep 29, 2011 3:27:16 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 29, 2011 3:27:16 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\base_domain\servers\soa_server1\logs\soa_server1.log.>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Sep 29, 2011 5:54:49 PM IST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.178.38.206:8001 was shutdown.>
<Sep 29, 2011 5:54:49 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 127.0.0.1:8001 was shutdown.>
[TopLink Info]: 2011.09.29 17:54:56.906--ServerSession(26407552)--deferred_session logout successful
[TopLink Info]: 2011.09.29 17:54:56.906--ServerSession(31983070)--tracking_session logout successfulIs the NodeManager , AdminServer running ?The NodeManager is not running. Is it required?
Also, I haven't closed the command prompt.
I noticed the issue when I tried to deploy my project. Connected to Localhost/7001 but in the deploy project window, I dont see any soa_server instance
running. Also, in the console the soa_server status is shutdown.
Maybe you are looking for
-
EJB 3.0 Entity Synchronization
Can I synchronize an EJB 3.0 entity object with a database table? I ask specifically for a foreign key I added to the the table after the creation of the entity object. If I can't how can I do it manually?
-
Attaching a printer to TC?
Hi i have a wireless home network set up through my internet provider.. a netgear something or other... i have ordered my 2GB Time capsule, due to arrive next week.. id like to attach my printer to the TC but not use its wifi? or should i use the TC'
-
HELP: USB to Ethernet Adapter
Hello Everyone. I have a USB to Ethernet adapter for my Macbook Pro Retina. After plugging it into an ethernet cable and connecting everything, my computer still isn't reading it. I am wondering if there is an install driver or what or if I am doing
-
I'm switching from jdk1.3 to 1.4.1_01 and I'm getting a java.lang.VerifyError when I dynamically load a class into my own Classloader and then try to access the Constructor. Class guiClass = myLoader.loadClass(className); Constructor constr = guiClas
-
Oracle 8i, SuSe Linux, big performance Problem
Hello, i have a very interisting problem on SuSe Linux 7.0 (or 7.1). Engine: Fujitsu Siemens Primargy, 4 Processors, 4 GB RAM I want to make a hot backup. After i set the tablespace in backup mode i make a copy of the tablespace. On that moment goes