Issue after merging 2 iweb domains

Hi
last night I merged 2 websites, and I thought everything was okay....I published them to my.me account ( I am not ready to post to an outside host yet)....the merged site looks good when I access it through the url, but I wanted to do some editing this morning and all of the images are gone from the domain in iweb. Does anyone have a clue as to where they might have gone? Or if there is a way to retrieve them. I still have both pre-merged domains so I can start over form there if I must, but I am afraid that i might cause the same problem to happen again.
Any thoghts?
Thanks

okay I did that and here is what I found:
the combined site did come up, but all of the images were missing....each iplace an image was to appear had a big x and a ? mark and a box saying images missing... and to reload the images
I think it will be easier to remerge the sites and try again....i thought I backed up the combined site but apparently I did not....a painful reminder to back up always
I just wish I knew what I did wrong to prevent it from happening again
OT, Thanks for your suggestions and help.

Similar Messages

  • Merge iWeb sites

    Can anyone work out a way to merge iWeb Domain files.
    ie I have made 3 different sites on 3 sepoerate iWeb Domain files but now I would like to merge them all so they ALL show up in the one iWeb.....
    3 seperate folders in the the one launch
    This way I would not have to quit each time to rename the Domain file and then realunch.
    Any ideas

    Can anyone work out a way to merge iWeb Domain files.
    ie I have made 3 different sites on 3 sepoerate iWeb Domain files but now I would like to merge them all so they ALL show up in the one iWeb.....
    3 seperate folders in the the one launch
    This way I would not have to quit each time to rename the Domain file and then realunch.
    Any ideas

  • Personal Domain not function after Move the Domain (iWeb) to a New Mac

    Hey,
    I recently move my iWeb Domain to a new Macbook Pro..after Published the iWeb...the message window shown visit the website as web.me.com/xxx instead www.xxx.com
    Why?
    i try to reset the personal domain in MobileMe ,remove it and add it again...now re-published...the same result...and when click on Visit...the URL shown web.me.com/xxx instead www.xxx.com
    Any problem here?help me please...thanks

    All right now...
    I Delete the iWeb.plist (UserID-Library-Preferences-com.apple.iweb.plist) and re-publish it again...Now...huh...No Problem at all...
    cheers

  • Merging two iWeb domains

    Hello,
    About a year ago I thought it would be nice to work with two seperate iWeb domains. To make a long story short: it isn't.
    So I'm deeply regretting splitting up, and in both domains there are some pretty important websites. Is there any way to merge them back in again?
    Thanks,
    Julian

    Julian ~ See section 6 here:
    http://iwebfaq.org/site/iWebUsefulapps.html
    ...found by doing THIS.
    And before doing anything, don't forget this:
    _iWeb: Backing up your Domain file_

  • HT2548 How can I resolve a conflict of 2 different iWeb Domains in my Library?

    I somehow (using 2 different Macs) created 2 different iWeb domains (Domain and Domain 1) and now need to combine them into one Library on my new iMac. How can I resolve this issue? I want to be able to merge Domain 1 into Domain, so I can also FTP publish the pages in Domain 1 to my new webhosting service, (in addition to the many others I've already published from Domain). But I don't know how to merge them or even if it's possible? Can anyone help me out with this? This is the last thing I need to do before moving to iCloud. Thanks.

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Can't open file "~/Library/Application Support/iWeb/Domain.sites"

    I was working on iWeb today, doing the usual adding pictures, and gave a few pages some color, and a few pictures here and there.
    I restart my computer, because as usual, I almost have no memory left. When the computer is running again, I opened iWeb, and I get this odd message:
    Can't open file "~/Library/Application Support/iWeb/Domain.sites"
    Why is this here? I didn't do anything weird to trigger such message. The site was working perfectly fine! I tried taking the domain file to the desktop, then opening it once iWeb launches from there, and same message appears. I put it back to its place, and tried putting the iWeb plist on the desktop, and same deal!
    Everything is back in its place, I haven't changed or triggered anything to deserve this. I ran Onyx, full optimization update. I restarted computer, and conducted a full disk permission repairs. Only 1 error found out of another app.
    My computer is healthy, my programs are running fine. What is going on? Does anyone know how I can fix this?

    Hi
    Whaow 3.1GB. I'm sure iWeb has problems with that. I have the same problem with my iWeb. I have about 100 BLOG pages with a lot of pictures. Although iWeb scales the pictures when publishing (good!) it does not scale them when they are stored in the domains file/dir (bad!) So if you have an 8MP camera, this adds up after a while.
    You can open the comains file and try to figure out what causes the trouble. (Right click/CTRL click, open content) sort on size to see if you have some extremely large stuff in there (Movies???) Take them out and try to make them smaller.
    Good luck!!
    Walter

  • Issues After Disabling IPv6 on Your NIC on SBS 2008

    If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot:
    Microsoft Exchange services fail to start
    Server hangs at “Applying Computer Settings…” (can eventually logon after 30 – 60 minutes)
    Network icons show as offline
    Some or all of the following events
    Application Log Events
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185,
    “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchange ADAccess
    Event ID: 2601
    Task Category: General
    Level: Warning
    Description:
    Process MSEXCHANGEADTOPOLOGY (PID=952). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=DC1301662F547445B9C490A52961F8FC,CN=Microsoft Exchange,CN=Services,CN=Configuration,…>
    – Error code=80040a01.
    The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.
    Source: MSExchange ADAccess
    Event ID: 2102
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). All Domain Controller Servers in use are not responding: SBS.sbs2008.local
    Source: MSExchange ADAccess
    Event ID: 2105
    Task Category: Topology
    Level: Warning
    Description:
    Process MAD.EXE (PID=2088). Exchange Active Directory Provider failed to obtain DNS records for domain sbs2008.local. DNS Priority and Weight for the Domain Controllers in this domain will be set to the default values 0 (priority) and 100 (weight).
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=952). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
    Base article 218185, “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchangeFBPublish
    Event ID: 8197
    Task Category: General
    Level: Error
    Description:
    Error initializing session for virtual machine SBS. The error number is 0x80040a01. Make sure Microsoft Exchange Store is running. Also, make sure that there is a valid public folder database on the Exchange server.
    Source: MSExchangeTransportLogSearch
    Event ID: 7005
    Task Category: General
    Level: Error
    Description:
    Microsoft Exchange couldn’t read the configuration from the Active Directory directory service because of error: Failed to load config due to exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Exchange Topology service on server
    localhost did not return a suitable domain controller.
    System Log Events
    Source: Service Control Manager
    Event ID: 7044
    Task Category: None
    Level: Warning
    Description:
    The following service is taking more than 16 minutes to start and may have stopped responding: Microsoft Exchange System Attendant
    Source: Service Control Manager
    Event ID: 7022
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Transport service hung on starting.
    Source: Service Control Manager
    Event ID: 7024
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Information Store service terminated with service-specific error 0 (0×0).

    Hi,
    Based on your description, it seems to be the same as the following blog.
    Issues
    After Disabling IPv6 on Your NIC on SBS 2008
    Did you mean that encounter the same issue? If so, there is a resolution in that blog, please check if can
    help you solve the issue.
    If any other issue exists or any update, please don’t hesitate to let me know and provide more details. It
    will help me understand clearly.
    Best regards,
    Justin Gu

  • Why does my iWeb Domain file not open in my laptop?

    I'm having trouble opening my iWeb domain files on a different computer (which I need to be be able to do). I've looked at the other relevant discussions re iWeb domain file editing issues . The problem seems to be (I think) that I have no Library folder in my home folder. Nevertheless, when I open iWeb on my main computer, my website is there. When I copy that file and try to open it from my Macbook Air, all that shows in iWeb is junky stuff I've done on my Macbook in iWeb. My actual website is nowhere to be seen. I've checked the size of the Domain file too, to make sure I've copied the right one and I have. And does anyone know why I neither have a Lbrary folder in my user folder on my Mac Mini or my Macbook Air?

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
    This may help use diagnose this issue and your other thread's printer issues.
    Thank you,
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Where is IWEB domain file in lion time machine backup

    I have read around and know how to locate the iweb domain file on my computer- apparently the library file is hidden and you need to press alt to unhide it.
    But my problem is a bit different. I recently reformatted my system back to lion. I was going to use my time machine back up to restore but apparently its corrupt and I can only manually nagivate the files now. I'm trying to look for my iweb domain file while navigating the folders but cannot find it. I went to library and application support but there is no Iweb file there. This back up was done in lion, so I don't know where i can find this "hidden" library file.
    I know its a hidden file because when i go to the library folder on my mac- HD>library> app support I don't find the iweb domain on my computer. Its only after i unhide it by pressing alt when i click on "go" do i get a library folder in which the iweb domain is housed.
    I would really like to recover my website but dont know where to look on my timemachine backups.
    Any help would be appreciated.

    The default location for the domain file is your Users/Home/Library/Application Support/iWeb folder. So go to that folder in Time Machine and see if you can see and recover the Domain.sites2 file.
    Then make the Lion library visible as described below and open it with iWeb as described below:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    NOTE: If you repair disk permissions with Disk Utility on your boot drive you will have to rerun the script with Terminal to make the Library folder visible again.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Or you can download an already compiiled version with this link: iWeb Switch Domain.
    OT

  • IWeb Domain in iDisk

    Hello. Thank you all for yesterday's replies. Very helpful. Another problem came up, which I cannot solve so far...
    I now have 2 different iweb domains for my websites with different filenames (i.e Site1 and site2). Site1 is up and running and I am able to place it on my iDisk.
    However Site2 does not upload to iDisk. The arrows of iDisk Sync keep turning and turning and the file does not upload. After a while a messages pops up stating that the file for Site2 is being used elsewhere, which is not true because I have iWeb closed. Now the interesting part is, I tried to upload this same file to drop box and I managed to do it successfully and appers to be up and runing there... The question is: How can I "force" the iDisk to accpet this file?
    Thank you

    Thank you for your reply. I realized no that I confused things a bit. Will try to simplify.
    I want to edit my 2 sites in 2 different computers (iMac and MacBook). I have them in 2 different domains within iWeb(Chronicles.sites2 and Sligo.sites2). I want to store both iWeb domains (files with .sites2 extension) on my iDisk so that I can access them from both computers. And here lies the problem. The Sligo.sites2 file is being easily uploaded to the iDisk. I can open the file on both computers and make all the changes I want.
    The file Chronicles.sites2 is not uploading to iDisk. It keeps trying but after a few minutes a message appears saying that it is not possible to upload the file because it is in use, when is not. The curious part is that when I try to store it on my DropBox, the file is transfered and works on both computers. I would like to have both on the iDisk. Any suggestion in how can I try and upload it to my iDisk?
    By the way... I do not use the webhosting from MobileMe.
    Thank you
    Regards

  • Can't open old iWeb domain file (yes, I have asked in the other forum!)

    I had to wipe my MacBook hard drive and reinstall my data and OSX. Having tried to restore my iWeb domain file from Time Machine, I find I am unable to open it. (I've asked this question in the iWeb forum but was eventually directed here.) I've tried seemingly everything, including changing the file's permissions, wiping iWeb preferences, creating a new domain, deleting it and replacing it with the old one. Still I'm told iWeb can't open the file.
    Could it be corrupted? It's probably relevant that it was created under a different account (I had to create a new one when I wiped the disk) and I believe iWeb doesn't like opening domains created by "another" user.
    Any help much appreciated. It's important because I am applying for a new job and my online folio -- aka my iWeb website -- is not up-to-date, which looks very strange.

    I have to confess, I was hoping someone with more knowledge about iWeb's Domain file would chime in.  Evidently not, though.
    Let's try something else.  Run the following two commands in the Terminal (paste them in, only one at a time, and hit return after each one):
    ls -al ~/Library/Application\ Support/iWeb
    ls -al ~/Library/Application\ Support/iWeb/Domain.sites2
    Then paste the output here.  Here's what I get:
    Hyperion:~ thomas$ ls -al ~/Library/Application\ Support/iWeb
    total 16
    drwxr-xr-x   4 thomas  staff   136 Aug 13  2008 .
    drwx------+ 75 thomas  staff  2550 May 22 20:08 ..
    -rw-r--r--@  1 thomas  staff  6148 Jul 20 07:03 .DS_Store
    drwxr-xr-x@ 15 thomas  staff   510 Mar  1 15:02 Domain.sites2
    Hyperion:~ thomas$ ls -al ~/Library/Application\ Support/iWeb/Domain.sites2
    total 2528
    drwxr-xr-x@ 15 thomas  staff     510 Mar  1 15:02 .
    drwxr-xr-x   4 thomas  staff     136 Aug 13  2008 ..
    -rw-rw-r--   1 root    admin   97259 Jun 20  2008 200250987-001_a.jpg
    -rw-rw-r--   1 root    admin  156244 Jun 20  2008 71197600_a.jpg
    drwxr-xr-x   8 thomas  staff     272 Oct 25  2010 Albums
    drwxr-xr-x   3 thomas  staff     102 Jul 10  2008 Contents
    -rw-r--r--   1 thomas  staff     395 Mar  1 15:02 DomainState.archive
    drwxr-xr-x   3 thomas  staff     102 Aug 13  2008 QuickLook
    -rw-r--r--@  1 thomas  staff    4548 Jul 11  2008 back.png
    drwxr-xr-x   3 thomas  staff     102 Aug 13  2008 domain-F984C302-FDAB-4F41-B32E-8D9FDAFBF9D7
    -rw-rw-r--   1 root    admin   57343 Jun 20  2008 dv423037_a.jpg
    -rw-r--r--   1 thomas  staff    1889 Oct 25  2010 index.xml.gz
    -rw-r--r--   1 thomas  staff   59546 Oct 25  2010 localAssets.plist
    -rw-r--r--   1 thomas  staff     182 Oct 25  2010 permalinks.plist
    -rw-r--r--@  1 thomas  staff  893344 Apr 18  2010 sharedassets.plist
    Hyperion:~ thomas$

  • Unsupported image format after merging aperture libraries

    I've experienced a large number of files with 'unsupported image format' after merging aperture libraries from separate external hard drives.  I did not have this problem in either library prior to merging them.  Can anyone advise how to rectify this issue?  Thanks

    Try running  library repair on the merged library and see if that helps.
    To run the repair open Aperture while holding the option and command keys down. Select Repair from the menu.
    Post back if you still have the problem.

  • Photoshopcs6  merge layers function moving images after merge

    I'm trying to create a tiled texture using a seamless image. too bad its bricks. ive been having this issue throughout all of the photoshop steps in this experience. I'm pasting another image of the same before it in a new layer. merging it. created a line doing this. copied that line. merged it. fine.
    copied new line. pasted. merged. BOOYAH! IM MOVING YOUR IMAGE AFTER MERGE!! BWAAHAHAHAHAHA IM EVIL!!!!.
    why is this happening. I'm not doing anything different. This keeps happening. over and over again.
    On my last file, I didnt even merge all the layers. I saved the file out as a png, and the result was the same as if I had merged the layers, which moves everything around. what do i need to change?!

    Please post screenshots to illustrate the issue.

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Maybe you are looking for