Issue at the time of Data load

Hi Team,
While doing Import from data manager package syatem not loading the data and througing error.
Log as below:
Package:                     Import
Appset:                      RCOM1
Application:                 LEGALAPP
Request Time:                2009-03-31 04:58:14
Start   Time:                2009-03-31 04:58:14
End     Time:                2009-03-31 04:58:15
Total   Time:                00:00:01
TOTAL STEPS  3
1. Assign initial parameters:        completed  in 1 sec.
2. Convert data:                     Failed  in 0 sec.
[Selection]
FILE= DataManager\DataFiles\My Files\TB_FEB_2009_1.txt
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
CLEARDATA= No
RUNLOGIC= No
[The list of conversion files in each transformation file]
Transformation file: DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
[Messages]
Convert data
The data file is empty. Please check the data file and try again.
I am using same members are there in dimensions and same dimensions. Because of this reason I havent used any transformation file for loading data into legal application.
Please help me in resolving this error.
Regards
Naveen.KV

Hello,
    It looks like the convert data task is receiving an empty file to load. Are you use the standardt Import package or a custom one?
    Please try to activate the debug information, adding the instruction DEBUG(ON) and verify the data into the file passed to the conversion task.
Regards,
Mihaela

Similar Messages

  • How can I specify the PARTITION name at the time of data load?

    Hi,
    I have a table with 4 partitions. By using SQL*Loader I'm going to load data into the same. While inserting the records it should go to the 2nd partition only.
    Where should i specify the Partition name?
    Please clarify me with sample code.
    Thanks.

    Assuming that the partition is empty before the load, I would load the data into a temp table with the same structure as the partitioned table. After all the data is successfully loaded, exchange the partition of the table with the temp table using 'alter table ... exchange partition...'
    Another question is, how is your table partitioned?
    Message was edited by:
    Jens Petersen

  • How to Load Revalued Assets in FA at the time of Data Conversion

    Dear Experts,
    How to Load Revalued Assets in FA at the time of Data Conversion?? Please help me
    Thanks & Regards
    Laxman

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

  • Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

    The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
    I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,!  I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
    PLz tell me why! How to deal with it !

    Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

  • Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

    I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

    There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
    This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
    http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
    If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
    I'm guessing Apple thinks only Time Travellers need to ask what year it is...

  • In the advanced tab of languages and Region the time and date formats will not change

    For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

    You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

  • Find out the time sheet data entry fields

    hi
    this is satish,
              i inserted the time sheet values in the time sheet data entry view. now the my problem is where these field values store in which tables.
    thanks for all

    Hi:
    I need to transfer CATS data to FICO. I found out about transaction CAT7.
    At the moment, I have 2 issues:
    1) My CATSDB data have status "30". However, there is no corresponding entries in CATSCO. Could you tell me what I need to do to ensure that CATSCO has values?
    2) My FICO system is running on 4.6C whereas my HR system is running on ECC6.0. Can CAT7 still works?
    I appreciate your response.
    Thanks,
    Ash

  • How can I change the language of the time and date and numbers?

    Hey
    I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
    so how can I change them?

    Go to settings >> general and checkout keyboard, international and date & time.

  • My gradson got ahold of my grandaughters IPod touch and I no longer have a settings button.  The time and date on this is wrong.  How can I fix this problem.

    I need help...  I no longer have all of the buttons on my IPod touch screen.  My grandson got a hold of it and boom..  The time and date is wrong also, and I have no access to fix this problem.  There is no settings button.
    Any help would be appreciated.

    Assuming that by buttons your mean the icons for various apps are missing, use the Spotlight search feature (double click the Home button and go all the way to the left past the music controls) and search for: Settings. Go to Settings>General>Reset>Reset Screen layout and also correct the time inthe Genera settings.
    The Setting app can't be deleted or hidden via Restrictions.

  • When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

    Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

    Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac.  If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
    Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

    I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu.  However on the test page for the fax the time and date are showing Jan-00-00 00:00AM.  I do not know how to change the date and time.  Please help.  Thanks.
    This question was solved.
    View Solution.

    Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can i add the dimensions and data loading into planning apllications?

    Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

    you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
    The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
    - Krish

  • Ipod touch always changes the time and date when synced

    Since I got my touch, even before any updates etc, every time I sync it the time and date changes, usually back about a week or so. Anyone else got this problem or any solution as its really annoying me. A cutting edge bit of kit that has practically every function that works so well and the clock and calendar cant keep time? weird....

    Not true in all cases, I updated to 2.0 and had 2 problems: One App had a Bug *NOT Apple`s fault*, and the second was another App ( again, not Apples fault ) that went back to home screen after opening. This was solved by a simple reset ( I have the first batch of Touches, 16 gb ). And the battery thing, I haven`t noticed it at all, I have an almost full charge, and have been using it for 4 days, never shut it down, only sleep mode when not in use.

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for