Issue. Camera tethering. Nikon D7100 and D5100. Not recognizing camera(s). Tried all trouble shooting tips including deleting preference file.
Running mac OS 10.9.4 lightroom 5.6
Nikon D7100 and D5100. None is recognized by tethering. No problems with downloading pictures where each camera is correctly identified.
Tried all steps in Lightroom help with no result.
Is this the list of steps that you have tried?
Troubleshoot tethered capture in Lightroom
Similar Messages
-
I have purchased TRANSLATE SMS and it does not translate.
I have done all the trouble shooting that apple advise and still nothing.
Has any one got any suggestions?When you contacted the developer, what did they say?
-
I am trying to restore factory setting on my old iphone 4 so i can send it back to my wireless company for the trade in program. I keep getting error message from apple 3014. I have tried all troubleshooting tips and still get the error message. Does anyone have any tips? Thank you
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>Thank you for asking this question. I'm having the same issues.
Liz -
My new 4S iphone is not showing in itunes and have followed all trouble shooting tips???
My new 4S iphone is not showing in itunes and have followed all trouble shooting tips. It does show in iphoto and wants to download photos. Any suggestions???
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
States the account cant be used or the password and such is wrong. I noticed that after google bought youtube it all became complicated. Tried all trouble shooting, Any ideas?
That would indicate an issue with the local network, not internet. This can impact devices differently and will likely be more obvious on a streaming only device.
If you are on wifi try ethernet
Make sure DNS is set to auto (settings - general - network)
Go to istumbler, netstumbler or similar to get a report of the network, look for signal strength and noise. -
TS1702 I keep getting errors and i have tried all trouble shoot options.
I keep getting error 0xE8000041 and i have tried all trouble shooting options on my ipod touch 2nd gen running ios 4.2.1
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips
my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips
This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
My iPhone 4 turned itself off, even though it is fully charged. It will not turn back on.
I tried the "hold down the button for ten or more seconds" remedy, to no avail.
I tried plugging it in to reset it using iTunes, but iTunes won't find the phone.
What else can I do?
The nearest AT&T store is over 10 miles away and it's after closing time...
Please help!I seem to have found the answer by my own foolishness....
I held down the on/off button on top and the "belly button" on the front bottom and whoosh! it came back to life.
It would sure be nice if Apple would restore the Troubleshooting area of their website and include information like this so Luddites like myself could keep a lower blood pressure.... -
hi,
just got a MacBook pro 2008 from a friend who bought it online. When it came we tested it and it was working. The person he wanted to supply changed his mind and my friend left the mac in the office cabinet since late last year. I decided to buy it and when I tried to turn it on it wouldn't. I charged the battery fully and checked if it was ok. I tried smc and nvram reset yet no sound or beep or any sign of life. There are no apple store around where I live in Nigeria now.
thanks"Any suggestions would be great - Thanks!!!"
Have him take it to an Apple store or AASP. (Stay away from Macs. You're a PC guy). -
Nano not recognized by Windows - tried all of the forum hints
SOOOO frustrating.
After downloading the latest update, my 4gb nano is no longer recognized by Windows or Itunes. It does not show up in device manager or even as an 'unrecognized device' in Device Manager. My wifes Nano (identical) shows up immediately on the same computer. My nano is not recognized on her computer, so it is definitely something with the Ipod, not the computer(s).
I've tried putting into disk mode, and I've followed the instructions on the web page that mentioned using the HP USB formatting tool. No dice - the computer just doesn't think this thing is a USB device. It charges just fine, plays just fine, etc. I've put it through all the diagnostic mode tests, and still nothing.
I really hate to pay some enormous fee to fix what was obviously some bug in the update.
Anyone have any other ideas ? I've reset the nano to factory defaults, etc. Is there a way to 'wipe it clean' when any computer doesn't recognize it ?
Thanks !OK I had this issue found answer on another discussion topic. You have to reformat your iPOD drive to FAT32 using your computer and then use the updater to restore.
Here is what I did and it worked:
1. Connect your iPOD and put into disk mode (hold down menu and select until apple logo appears, then immediately hold down select and play/pause until iPOD enters disk mode)
2. Find out what drive your iPOD is on by looking in My Computer (e.g. E:, G: or I:)
3. Go to start menu --> run
4. Enter cmd and select'OK'
5. Black dos box comes up
6. type "format I: /FS:FAT32 /Q (enter)"
(I: is the drive name - change to your drive if different)
7. type enter when it asks for the disk.
8. Leave disk label blank. (just hit enter when prompted)
9. After finish formatting use system tray to safely remove hardware from the drive.
10. Restart computer
11. Launch ipod updater
12. connect ipod
13. After recognizes iPOD - select restore
14. Let it complete restore successful - iPod may still show the do not disconnect
15. Disconnect ipod (again using system tray)
16. Restart computer
17. Launch iTunes
18. Connect iPOD should be recognized by iTUNES (FINALLY!!)
If not try uninstalling and reinstalling iTunes - then connect iPOD
ABOVE worked for me. I had to do for two nanos after the updater caused them to crap out. -
Sound on my iPhone 4S is messed up, tips and suggestions left by others not working any more. At first turning it off for a while worked, when turned it back in the keyboard click would work for a few keystrokes but now not even that. Had the phone for a bit more than a year, so I know my sound is on and checked all my settings. Posted suggestions from support is not helpful. I guess next step is to take it in for repair? Or is this Apple's way of telling us to upgrade? :(
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
FYI, Apple does not repair iPhones. If basic troubleshooting does not resolve either purchase a new iPhone or take the device to Apple for an Out of Warranty replacement which is $199US for the 4S. -
My Ipad air the batterry is dead and will not show any signs, tried all cables and correct 12w charger, any ideas ?
Does you used lighning official cable ?
If yes :
-Try to to wash the connector with a brush and little bit of alcohol by paying attention !
OR
- Restore youre iPad -
I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support
What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link. -
I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?
Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler
Maybe you are looking for
-
How do I install Java 6 on my Mac OS X 10.6.8?
Just purchased a GoPro3 and it needs an important update, however my Mac keeps telling me to install Java 6, but when I go to my Mac Software Update it tells me everything is up to date.
-
If you unplug the headphones ipod does not stop the music. How do I fix this?
If you unplug the headphones ipod does not stop the music. How do I fix this? При отключении наушников ipod не останавливает музыку. Как это исправить?
-
Reason for Rejection getting Auto Populated
Hi, I am creating an std order without reference to a preceding document, still the "reason for rejection" is auto populating in the Reason for rejection Tab. I dont want this to happen, please suggest. Sachin
-
Hello, I use EJB 3 for my application and it uses <local-tx-datasource> for connecting to database,everything works fine but i have one question: How many connection does it open to DB? I thing that only one ,but i am not sure.is that server specific
-
I have modified a script that I've found to create numerous panoramas, so that I can walk away and not babysit my computer. The script is working fine, but there are a couple of other issues that I'm now trying to work out. Before I created this scr