Issue canceling public folder migration
moving some public folders from exchange 20007 to 2013.
ran into an issue that was stopping the migration due to naming convention of some of the public folders, found out that folder and some others were no longer needed, leaving me with just one folder, so I thought it would be simpler to just create it
on the 2013 server.
so on 2013 exchange I ran Get-PublicFolderMigrationRequest | Remove-PublicFolderMigrationRequest and it seemed to run without error, but when I go to create a new public folder mailbox on the 2013 server I get the error "an existing public folder
deployment has been detected. to migrate public folder data create new public foldermailbox using -holdformigration switch"
am I missing a step to kill the previous migration request, I had read that was all I needed to do.
Hi,
The public folders are still on Exchange 2007 server, is it right?
For this issue, it seems that you have created public folder mailbox on Exchange 2013 server. Please check if there is existing public folder mailbox on Exchange 2013.
And please use the following command to create public folder mailbox for migration.
New-Mailbox -PublicFolder <Name> -HoldForMigration:$true
Here is an article about how to migrate public folders to Exchange 2013 for your reference.
https://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support
Similar Messages
-
Issues with Public folder migration
Hi,
I'm at the end of an Exchange 2007 to 2010 migration. 99.9% of mailboxes have been moved to the 2010 Mailbox server. The environment is : 2007 SP3(1 X CAS, HT and MBX), 2010 SP3 (1 X CAS, HT, and MBX). I'd really appreciate some help on some Public folder
replication issues:
I have replicated the default public folders across using:
AddReplicaToPFRecursive.ps1 -Server 2007MBX -TopPublicFolder "\"
-ServerToAdd 2010MBX
1) When I get public folder statistics from each Exchange mailbox, there are a few public folders where there are 1 or 2 items on the old server that are not on the new one. There is one public folder on the new server that is not on the old one. I've
updated the hierarchy but that hasn't helped. Is it possible this is because of the folder being created on the new server later on? Is there any way to easily find the folder location in a complex hierarchy?
2) When I try to get public folder statisctics on the 2007 MBX server, I get the following:
[PS] C:\Documents and Settings\ha>Get-PublicFolderStatistics >d:\test\test2
.txt
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1ECE0000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1EDA0000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A0300789C48D2424955459FDBE1D59E103FF6000
0000652320000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
How do I find the object referenced by the series of numbers (for example, 000000001A447390AA....)?
I'm also seeing some backfill events (even ID 1020) on the 2010 Hub transport.
3) Which System Public Folders should be replicated from 2007 to 2010 prior to moving them using the moveallreplicas script? At the moment, the following are replicated between both servers:
StoreEvents (Old server), Schema-root, Schedule + Free Busy (and sub folders), OWA Scratchpad (Old Server), Event's Root, Offline address Book (/o=Exchange2003/cn=addrlists/cn=oabs/cn=Default Offline Address List & EX:/o=Exchange2003/ou=Exchange
Administrative Group (FYDIBOHF23SPDLT) )
Other system public folders are not replicated.
Thanks,
HAHi,
1) You can use the Get-Publicfolder -Recurse | Format-List Name, *path cmdlet to check the parent path of public folder.
2) You can use the Get-PublicFolderStatistics | fl name, *identity command to get the identity of public folder. View the list of identity you get, and check if you can find the following object.
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1ECE0000
3) When you migrate public folder from Exchange 2007 to Exchange 2010, you need to replicate the following system public folders, you can remove the others.
SCHEDULE+ FREE BUSY, OFFLINE ADDRESS BOOK and EFORMS REGISTRY(if you use Organizational Forms)
Here is a related thread for you reference.
https://social.technet.microsoft.com/Forums/exchange/en-US/236fbd47-6907-4bb7-8f44-aec8acfa5cac/public-folders-system-folder-replication-from-exchange-2007-to-2010?forum=exchange2010
Best regards,
Belinda Ma
TechNet Community Support -
Public Folder Migration from Exchange 2007 to 2013 fails RelinquishedWlmStall budget limitations
I have been trying to migrate approx 50 public folders from Exchange 2007 to Exchange 2013 for several months. I have followed every link I can find on how to do the migration properly. It will stay in a queued state for hours until the MRS is
restarted. It will then start copying messages. After reaching 28% I get RelinquishedWlmStall as Status Detail. Running the Get-PublicFolderMigrationRequestStatistics -IncludeReport | fl command I get the following: (truncated)
Status : InProgress
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : ff4af794-f31e-4334-959f-7d6c4ccbe310
RequestQueue : PublicFolders
ExchangeGuid : b12c1f83-c4ae-46bb-a26a-0422d90800e4
Identity : eddf983d-5827-4a2a-98ef-820321ebebd0\ff4af794-f31e-4334-959f-7d6c4ccbe310
DiagnosticInfo :
Report
4/23/2015 8:49:37 AM [pionexxxx] Request processing started.
4/23/2015 8:49:37 AM [pionexxxxx] Cleared sync state for request
00000000-0000-0000-0000-000000000000 due to 'CleanupOrphanedMailbox'.
4/23/2015 8:49:38 AM [pionexxxxxx] Stage: CreatingFolderHierarchy. Percent complete:
10.
4/23/2015 8:49:38 AM [pionexxxxxx] Initializing folder hierarchy from mailbox '': 50
folders total.
4/23/2015 8:49:38 AM [pionexxxx] Folder creation progress: 0 folders created in
mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:38 AM [pionexxxxx] Warning: Failed to find or link recipient object
'FF-D5-EF-1A-0A-95-D7-4B-89-02-A6-9E-DA-4D-23-4B' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes' with EntryId '00-00
00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E
98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-4C-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'D8-46-09-BE-0B-3D-6E-4A-95-10-8F-C5-AA-0B-88-50' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Inventory'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-12-6A-F5-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'A6-12-DA-05-7D-21-DE-44-90-61-64-23-8C-62-41-F4' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Ulysses'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-7C-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'96-76-90-F1-A5-B7-DB-41-A7-A3-D6-8D-86-AE-45-A5' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/CSR Schedule' with EntryId '00-00-00
00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E-98
03-B9-14-4F-B4-12-C1-00-00-00-0E-34-FF-00-00'. This folder can be linked manually
by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'82-72-47-AA-D7-68-85-4C-91-92-41-45-8A-20-EA-6D' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/DC 24 Hr Schedule' with EntryId '00-
0-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-85-62-89-2A-52-C3-92-
5-93-F8-5A-6F-56-5D-D1-D4-00-00-00-00-27-37-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:41 AM [pionexxxx] Folder hierarchy initialized for mailbox
'b12c1f83-c4ae-46bb-a26a-0422d90800e4': 46 folders created.
4/23/2015 8:49:41 AM [pionexxxx] Stage: CreatingInitialSyncCheckpoint. Percent
complete: 15.
4/23/2015 8:49:41 AM [pionexxxx] Initial sync checkpoint progress: 0/50 folders
processed. Currently processing mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:42 AM [pionexxxx] Initial sync checkpoint completed: 46 folders
processed.
4/23/2015 8:49:42 AM [pionexxxx] Stage: LoadingMessages. Percent complete: 20.
4/23/2015 8:49:43 AM [pionexxxx] Messages have been enumerated successfully. 40607
items loaded. Total size: 149 MB (156,253,810 bytes).
4/23/2015 8:49:43 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 25.
4/23/2015 8:49:43 AM [pionexxxx] Copy progress: 0/40607 messages, 0 B (0
bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 28.
4/23/2015 9:04:37 AM [pionexxxxx] Copy progress: 3660/40607 messages, 7.015 MB
(7,355,409 bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
ItemsTransferred : 3660
PercentComplete : 25
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
It never tries to restart. Can anyone please help? The server checks for health all come back ok. I will be more than glad to include further information.Hi,
Basic on the error message, I notice that public folder migrate slow and display that “Relinquishing job because of large delays due to unfavorable server health or budget limitations” .
If I misunderstand your concern, please do not hesitate to let me know.
Since it is just slow and not failing, please do not stop the batch, it might connect to another server for sync.
Meanwhile, please refer to below link so that get details about Exchange Online migration performance and best practices:
https://technet.microsoft.com/library/dn592150(v=exchg.150).aspx
If the issue persists, please collect the relevant migration report for further troubleshooting.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Exchange 2013 Public Folder Migration Problem
Hi All,
Wonder if any of you can assist with a public folder issue I am having with Exchange 2013. We have migrated from Exchange 2010 to 2013.
I have followed the guide for public folder migration here
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Everything went fine and as per the document - except I had to use the "largeitemlimit" parameter to get the public folder migration to complete.
We tested the public folder migration by adding content to public folders and creating public folders and it all appeared to be OK, we completed the migration and removed our old public folder databases from Exchange 2010.
However we noticed later that users cannot CREATE folders in SOME public folders. It appears from some testing that any folder that does not lie in the first public folder mailbox, end users cannot create public folders. Administrators can create them
fine from the ECP - just not from outlook.
It also appears some users cannot see some folders that they have permissions to.
Can anyone assist with some ideas to resolve ?
Thanks.Question?
Are you able to create the Folder in OWA?
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
it is not functionally possible to create Public Folders in OWA user interface in Exchange 2013!.... From admin ECP it works fine!
My Bad, that's what I was trying to say.
Testing the same thing in the LAB, should have some update tomorrow morning.
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Exchange 2010 to 2013 Public Folder Migration -- Token Serialization
Here is the log entry,Failed to save admin audit log for this cmdlet invocation. Organization: First Organization Log content:Cmdlet Name: New-PublicFolderMigrationRequestObject Modified: f0daff33-6a93-4367-b609-662cfa0b92de\71fc0595-b5d7-4f15-8b7c-bffcefbd810fParameter: SourceDatabase = Public Folder Database Parameter: CSVData = VGFyZ2V0TWFpbGJveCxGb2xkZXJQYXRoDQpDb2JvY28gUEYsXA0KQ29ib2NvIFBGLFxJUE1fU1VCVFJFRVxBcg==...Caller: ExternalAccess: FalseSucceeded: TrueRun Date: 2015-07-07T12:41:45OriginatingServer: (15.00.0995.012)Error:Microsoft.Exchange.Data.ApplicationLogic.AuditLogAccessDeniedException: The requesting account doesn't have permission to access the audit log. --- System.Web.Services.Protocols.SoapException: The requesting account does not have permission to serialize tokens. at...
Hey Guys!
I'm in the process of testing a Public Folder migration from Exchange 2010 to 2013, I've been following the recommened migration scenario from Microsoft but have ran into this issue when running New-PublicFolderMigrationRequest. I let the request sit at a queued status for over 6 hours and then decided to look at the event logs. I'm receiving an access denied, requesting account does not have permission to serialize tokens.
Luckily this is just a test and not in a production environment :-)
Any suggestion or help to point me in the right direction would be appreciated
Thanks Guys
This topic first appeared in the Spiceworks Community -
Exchange 2013 Public Folder Migration Not Listed
I started a public folder migration from my 2010 SP3 Exchange server to my new 2013 SP1 Exchange server. Somewhere during the process I failed. Not sure where but I am now at the point where if I try to create a new public folder on teh 2013 box i get a
warning like this.
An existing Public Folder deployment has been detected. To migrate existing Public Folder data, create new Public Folder mailbox using -HoldForMigration switch.
So I then run Get-PublicFoldermIgrationRequest to see what is still waiting... I get no migration listed in Exchange Management Shell.
I would like to find the place in AD or in the Server that thinks there is still an active request out there and remove it so I can start again with a clean slate. How do I do that?
Thanks!Hi Zulea,
This is a known issue, I recommend you refer to the following article to resolve the issue:
http://support.microsoft.com/kb/3004062/en-us
Cause:
This problem occurs when the Exchange organization coexists with an earlier version of Exchange Server, and one or more public folder databases from the earlier version of Exchange still exist.
Resolution:
To resolve this issue, use one of the following methods.
Method 1: Create the mailbox by using the -HoldForMigration switch:
This option lets an administrator create a public folder mailbox in order to begin a migration from the existing public folders:
Open the Exchange Management Shell.
Run the following cmdlet to create the public folder mailbox:
New-Mailbox "Public Folder Mailbox" -PublicFolder -HoldForMigration
Method 2: Remove all public folder databases from earlier versions of Exchange Server
To remove existing public folder databases, see the following TechNet websites, as appropriate for the version of Exchange that an existing public folder resides on.
Exchange 2010:
http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx
(http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx)
Exchange 2007:
http://technet.microsoft.com/en-us/library/aa998329(v=EXCHG.80).aspx
(http://technet.microsoft.com/en-us/library/aa998329(v=EXCHG.80).aspx)
Create the public folder mailbox by using either the Exchange Admin Center (EAC) or the Exchange Management Shell (EMS). To do this, see the following TechNet website:
http://technet.microsoft.com/en-us/library/jj552410(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Public Folder Migration - 2010 to 2013 - Downtime incurred at "Lockdown" Stage
Looking for some information from those who have completed a successful Public Folder migration from 2010 to 2013.
1. Size of 2010 Public Folder Store
2. Downtime incurred upon the "Lock down 2010 Public Folder" stage once all mailboxes moved to 2013 and ready to cut-over to 2013I would like to refer you at this well explained technet library and check whether you follow all the required prerequisites for a successful public folder migration from Exchange 2010 to 2013 : http://technet.microsoft.com/en-us/library/jj150486%28v=exchg.150%29.aspx
Also, please check this another article resource : http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part1.html
Apart from above resources, you may also consider at this comprehensive application(http://www.exchangemigrationtool.com/) that can be a better alternative approach while migrating public folder database
between two exchange server. -
Exchange 2010 - 2013 Public Folder Migration target database gets much bigger than source database
Hi,
i have a question about the pf migration from Exchange 2010 to Exchange 2013. The source database ist about 370 GB. The migration process is still running. At the moment the target database is already 491GB big. Is that a normal behaviour during the migration
process.
ThanksHi,
After you have finished the public folder migration process, you can compare the item count of public folders to make sure all public folders have been moved to Exchange 2013.
You can check this by comparing the snapshots before and after the migration. You can refer to the "How do I know this worked?" section in the following article.
Migrate Public Folders to Exchange 2013 From Previous Versions
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
EXCHANGE 2013 Public Folder Migration across Domain Forest
Hi
I am planning to migration public folder across the forest but unable find any documentation. can you guys share the step by step guide to move/migrate public folder. we have exchange 2013 in source and target forest.
Please help!Hi,
Currently, there is no official document about Exchange 2013 cross-forest public folder migration. Maybe some third party software can help you to do cross forest public folder migration.
Best regards,
Belinda Ma
TechNet Community Support -
Exchange Contact Public Folder Migration Question
I am migrating our Exchange 2010 environment to Exchange 2013. We are migrating all of our public folders into SharePoint before we continue with the migration. Most of our public folders are calendars, so it has been a pretty cut and dry migration.
We do have one public folder that is designated for emergency contacts. It contains the personal contact information for the CEO as well as other high up execs and managers from around the company.
Here is my dilemma. I need to migrate this out of public folders, but it still needs to remain in Exchange somewhere. I need to accomplish the following
1. Be able to view all user contact info, not just email address
2. Be able to apply permissions to the folder so that only certain individuals can gain access to these contacts
3. Be available to sync with said user's mobile devices, so that they have 24X7 access to that information
I am not real sure how to accomplish this and am open to any ideas. I am very new to SharePoint, so not sure how you might be able to leverage SharePoint to do the same thing. Any information that anybody could provide would be greatly appreciated.
Thank you in advance,
--ScottHi Scott,
Since this is Exchange Server Forum, if you have any problem on SharePoint, I suggest ask SharePoint Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
Here is some information related to Exchange for your reference.
Based on my knowledge, Exchange 2013 is different from previous version of Exchange server. For example, public folder. Public folder in Exchange 2013 doesn’t based on public folder database, it is a mailbox level, called public folder mailbox.
We can follow following article to perform the public folder migration.
Use serial migration to migrate public folders to Exchange 2013 from previous versions
https://technet.microsoft.com/en-us/library/jj150486%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support -
Exchange Public Folder Migration - Public Folder Mailbox "LockedforMigration"
I've recently started a SBS2008 (Exchange 2007 - Latest SP3) migration to Exchange 2013CU6.
Most of the Migration has gone to plan however I've been following a few guides on the Public Folder migration and have seen more errors and time spent than what it is worth.
I've now decided to abandon the Public folder migration as there wasn't really anything of importance in the old 2007 Public Folders, and just setup a new Public Folder Mailbox and PF Folder on the 2013 environment, however... as I started with the migration
the 2013 Server is stuck in "LockedforMigration" mode and will not allow me to create a new Public Folder.
Is there anyway to forcibly 'unstuck/release' the "LockedforMigration = True value.
Or can I just start decommissioning the old 2007 Box and that will force the unlocking of Migration flag
By no means is this the only guide, but here is what I've been following if that will help
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
Thanks IanHi Ian,
According to the error message above, please make sure you are running the command as Administrator, and make sure the Administrator is a member of Organization Management Group and Server Management Group. Then try to run command to release "LockedforMigration
$True".
Since Public Folders on Exchange server 2013 can't be coexisted with legacy Public Folders within an Org, you should delete Public Folder Database from legacy Exchange server 2007 first, then create a new Public Folder Mailbox on Exchange server 2013.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Public folder migration question - Outlook
Will users need to restart outlook once the public folders have been migrated from 2007 to 2013? I know a downtime is required but I'm curious what the end users should expect when this happens. They are all on outlook 2010. We are going to send
out communication to our users. Thanks.
RichHello,
My environment is outlook 2010, exchange 2013. After I migrate public folder from exchange 2007 to exchange 2013, the outlook doesn't response the changes. So I restart outlook, it applies public folder changes.
During you migrate public folder, these steps (Lock down the public folders on the legacy Exchange server and finalize the public folder migration) require downtime, and you will not only access public folder. In my environment, the outlook clients can connect
to exchange server, and access other services, GAL and so on.
Cara Chen
TechNet Community Support -
Public Folder Migration to Office 365
I am performing a Public Folder Migration to Office 365 according to the steps at http://technet.microsoft.com/en-us/library/jj983799(v=exchg.150).aspx#Scripts. I made it down to Step 5, substep 5 where we are supposed to start the migration with a
New-PublicFolderMigrationRequest. The script fails with the following error message:
Starting a command on remote server failed with the following error message : [ClientAccessServer=BN1PR07CA0067,BackEndServer=co1pr07mb395.namprd07.prod.outlook.com,RequestId
=0f9fb78e-1c50-4371-9add-414cbbfc9f69,TimeStamp=10/30/2014 3:24:26 PM] [FailureCategory=Cafe-HttpProxyException] Cannot replay request as bufferedRegionStream cannot be reset
. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OperationStopped: (System.Manageme...pressionSyncJob:PSInvokeExpressionSyncJob) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
Any help or guidance is very much appreciated.
Randy GoodsonSo...I double-checked the authentication setting on Outlook Anywhere...it says Basic. But, when I changed to NTLM in the command line, it seems like it is working. However, now I get the following error:
The specified mailbox "Mailbox1" doesn't exist.
+ CategoryInfo : NotSpecified: (:) [New-PublicFolderMigrationRequest], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=CO1PR07MB395,RequestId=e9e9e242-9b1c-46ad-8f0f-375eeb0d5527,TimeStamp=10/31/2014 1:47:31 PM] [FailureCategory=Cmdlet-ManagementObjectNo
tFoundException] 933A0896,Microsoft.Exchange.Management.RecipientTasks.NewPublicFolderMigrationRequest
Any assistance would be greatly appreciated.
Thanks,
Randy
Randy Goodson -
Public Folder migration (2010 - 2010) replication issues
Hi all,
I'm currently migrating from one exchange 2010 SP2, to another exchange 2010 SP2 server, and all is complete apart from damn public folders.
Via EMS I ran
.\AddRelicaToPFRecursive.sp1 -TopPublicFolder "\" -ServerToAdd "NewEXC10"
And I left exchange a day or so to chug along through the 1GB of public folders. I went to check the replication by running
Get-PublicFolder -Recurse | fl Name, Replicas
And I get:
Name: IPM_SUBTREE
Replicas: <>
Name: All Public Folders
Replicas: <Old PFDB. New PFDB>
Name: Meeting rooms
Replicas: <Old PFDB>
Name: Company Contacts
Replicas: <Old PFDB>
and this goes on for every sub folder under the public folders. I also tried
Get-PublicFolderStatistics -Server "OLDEXCH10"
Get-PublicFolderStatistics -Server "NEWEXCH10"
So I could get the item counts, in case everything had copied over but is not showing folder structure.I get
OLDEXC10
Name ItemCount
All Public Folders 0
Meeting Rooms 137
Company Contacts 43
NEWEXC10
Name ItemCount
All Public Folders 0
/o=domain/cm=addres...0
I've not gotten any errors in the event log, and attempted to initate the replication again, but with the same results. Can any one please help?
Many thanks,Hi,
To troubleshoot this issue more efficiently, I need to clarify one thing.
Did you delete an Exchange 2003 server before?
If you had uninstalled the legacy Exchange server, please check if there is an empty Servers container under the administrative group container. If it is there, please remove the empty servers container to check the result.
If you didn't remove Exchange 2003 server in your organization, you can check the following suggestions.
Please check if the mail flow between two servers was working fine.
From the output of ruing the Get-PublicFolder -Recurse | fl Name, Replicas cmdlet, I noticed that the public folder Meeting rooms and Company Contacts didn't have replicas on the New PFDB. You can add the New PFDB to the replica list via Public Folder Management
Console.
After that, please set the public folder replication schedule to Always Run.
Did you update the public folder content using the Update-PublicFolder cmdlet? If not, please run this command to check the result.
If the issue persists, please increase the Diagnostic Logging Level for MSExchangeIS\9001 Public to Expert to check if there is any related errors to narrow down the issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2003 to 2010 Public folder Migration issue
I have successfully replicated our Exchange 2003 public folders to our exchange 2010 public folders using the addreplica script in exchange 2010 PS. I have moved all mailboxes to use the public folders on Exchange 2010. A couple of days ago I ran the
"moveallreplicas.ps1", and the command successfully ran and has removed all replica pointers in the exchange 2010 PF database pointing to the exchange 2003 database. In Exchange 2003 ESM, I still have the replication to all the PF databases, and
the 2k3 has not been removed, nor has the public folder instances folder count changed at all. In searching through the logs I am getting this error on the exchange 2003 event viewer for applications about every minute or less.
This is an SMTP protocol log for virtual server ID 1, connection #58254. The client at "xxx.xxx.xxx.xxx" sent a "xexch50" command, and the SMTP server responded with "504 Need to authenticate first ". The full command
sent was "xexch50 1076 2". This will probably cause the connection to fail.
The client IP indicated in the error is a Exchange 2010 server with the HUB/CAS roles loaded onto it. I am not sure if this is related or not.
I see some people have ran the move all replicas from the Exchange 2003 ESM, should I do that now? Is this even something to worry about since all my mailboxes are using the PF on 2010?
Thanks for any assistance!I have looked at KB http://support.microsoft.com/?id=843106 and
it did not resolve the issue on the Exchange 2003 server or 2010.
Last night I put in the fix for the Event ID 36885, method three of this article http://support.microsoft.com/kb/933430/en-us,
and the errors on both servers seemed to go away, but then have started back up this morning after about seven hours of no errors. I thought the registry entry would fix the issue, and it appears it did, but not sure why it would come back like this. I may
try restarting the servers tonight, but kind of confused how this could still be an issue with the registry entry in place.
Maybe you are looking for
-
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I
-
Can't connect wireless device to airport extreme
I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to
-
Update table on basis of calulation on other tables data
I have 3 Tables namely CM_RECIPE, CM_RECIPE_ITEM and CM_ITEM_FG as follows : CM_RECIPE CR_ID-------------------------- 367 CR_CIFG_CODE-------------- FG001 CR_BOM_CODE-------------- FINISH1 CR_QUANTITY-------------- 100 CR_RMC CR_TOTAL_COST CR_GROSS_
-
Pfksh core dump, set -o emacs
Hi, every time I try to set emacs on pfksh, it cores on me. Either set -o emacs or VISUAL=emacs or gmacs crashed pfksh right away. set -o emacs requires another press on return while the VISUAL crashes when exporting. Jumpstarted or full install stil
-
Customer master - Group Code in Additional Data screen
Hi, In customer master, in the 'Additional Customer Data' pop up screen (Extras -> Additional Data), you can find a field for group code (KNA1-KATR6). Where in IMG do I maintain the values for this field? Appreciate your advise. thanks!