Issue changing CutePDF default filename

Hi,
Does anyone know how we can change the naming convention for filename in CUTEPDF SAVE dialog box?
Our basis has set up device type 'PDF1' in SPAD and tie this to output device 'XX_PDF'. When we go to VA02 to issue output, if we set the print parameter output device 'XX_PDF', and print immediately, a pop up message box to save the PDF file will be displayed. The filename was defaulted <USER NAME>_<JOB SPOOL NAME>.
Our requirement is to display sales order number instead of spool id.
Is this possible to change via print program or any SAP setting we can do to change the naming convention of the PDF default file name?
Can you please kindly help?
regards,
Xiang Li
Edited by: xiangli heah on Nov 10, 2010 8:46 AM

Sorry, but that's not something over which the user has any control. You can, by editing a setting in the preferences file, eliminate the track number, but you can't change anything else. If you want that sort of control over how the files are named, you may wish to use a different utility to do the CD ripping and then add the tracks to iTunes. Max (donationware) allows a lot of flexibility in how the files are named.
Regards.

Similar Messages

How do you change the default filename?

I am using Photoshop 7.0. I downloaded a Photoshop template which has buttons with text labels. When I Save for Web, it names the output files by the name of the text on the buttons. I don't want it to do this but rather the default way; for instance, my file is named primary.psd and I want the separate files to be named primary_01.jpg, primary_02.jpg, etc. Where can I change this because I changed the text on the buttons but it has kept the original names.
Also, is there a way to change the default location from "images" to something else?
Thank you in advance.

Take a look at this page from Version Tracker (I typed in "Safari search" and there seems to be a range of possibilities.)
http://www.versiontracker.com/php/search.php?mode=basic&action=search&str=safari +search&plt%5B%5D=macosx&x=0&y=0

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

How do I change the default certificate in Java Web Console?

I have a 3rd party issued server keystore & truststore ready to go in both jks and p12 file formats. I wish to use this in the Sun Java Web Console instead of the self signed certificate. I cannot find any documentation as to changing the certificate. I did find commands to change the keystore and truststore passwords, but I want to change the entire certificate.
I tried manually messing with the /var/webconsole/domains/console/conf/server.xml configuration file but realized it was more complex than that. Is there a documented procedure for changing the default certifcate?
Thanks

Siri will use the default calendar specified in the Mail, Contacts, Calendars setting.
Go to Settings/Mail,Contacts,Calendars, then scroll down, and change the default in the Calendars section to your the one you prefer.
hope this helps.

Changing the Default Currency in Analytics App's don't change curr symbol

Hi All,
We are using BI APPS 7.9.4 with OBIEE 10.1.3.3.2
We want to change the default currency for reporting from $ to £ in BI Dashboard reports.
I have edited the currencies.xml file on $INSTALLDIR/OracleBI/web/config
changed the sybmol to £ from $
<Currency tag="int:wrhs" type="international" placeholder="true" symbol="£" format="$#" digits="2" displayMessage="kmsgCurrencySiebelWarehouse">
<negative tag="minus" format="-$#" />
</Currency>
<Currency tag="loc:en-GB" type="local" symbol="£" locale="en-GB" format="$#" digits="2">
<negative tag="minus" format="-$#" />
</Currency>
and restarted BI Server, Presentation Server, Java Host and all the OPMN services but the reporting currencies in the dashboard reports are still displayed in $. The report currency symbol is showing $ by default irrespective of the default currency set in the currencies.xml
Ex: $13459
Anyone know what this issue could be, please let me know if am missing anything.
I appreciate your help.
Rgds, Bhaskar Kolluru
Edited by: bkolluru on 30-Sep-2008 03:14

Did you try changing the format setting as well?
format="£#"

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default language?

How to change the default language of the Ubuntu desktop and of the Firefox program to Norwegian or Danish?

While this isn't the appropriate venue to ask about changing the default language in Ubuntu, the snide forum link above lazily fails to address the Firefox language issue, and unfortunately this link now comes up on the first page of google searches about the default language in firefox.
To change Firefox's default language, go to Edit -> Preferences -> Content, and click the "Choose" button under the Languages heading.
To change the default language of your spell checker, right click on any text area and find the "Languages" entry in the menu, then select the language of your choice.

How to change the default operators in sap web ui Search screen?

How to change the default operators in sap web ui Search screen?
For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
I need only "equals" operator. How do i remove the rest of the operators?

There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
Regards,
Harshit

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change the default view of published iCal's URL

I am publishing an iCal for a nonprofit group and link to the calendar from the group's website. The default URL given (in the send publish email option) leads to the week view of the current week. I would prefer the link to take site visitors to the month view of the calendar. If I go to the month view and copy the URL for it, and use that for the link, I have to change the URL each month, because the URL that comes from the month view will only show the month it was at the time I copied the URL -- it will not change with the new month. Does anyone have any idea of how I can change the URL so that it leads to the month view of whatever the current month is?
I should note that I know how to change the default view in the my browser, but I would rather not have to explain how to do this to all the people viewing the calendar -- just wanting the correct month view to show up when they click the link, without having to change it each month.
I would be so grateful if anyone has some insight on this!
Thanks.

Carlo,
The fact that this question has been left unanswered for over 2 months seems a little negligent on the part of Apple Support.
This Forum is unfortunately not Apple Support. According to Apple:
What is Apple Discussions and how can it help me?  "Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. You'll find a wealth of information about your favorite Apple hardware and software products that will help you get the most out of your purchase. You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages."
In direct response to your questions, I would say that (as observed by the OP) anyone who subscribes to a published calendar can make a change to their desired view using the "Preferences" icon which is displayed underneath the mini-month calendars.
There is no way that I know of to directly or conveniently change the time-range. There may be workarounds, but I could not find a suitable solution for you.
I would recommend that you provide iCal Feedback, if you are interested in informing Apple of your desires.
;~)

Changing the default Zone AAM in SharePoint

SharePoint Web App Provides 5 different Alternate access mapping Zone.
What is the best practice, is it the good practice to change the Default Zone of Web app in AAM.

Hi Maruti
At its most basic level, AAMs are configuration settings set in SharePoint Central Admin that tells SharePoint how to map a web request to the correct web application so that SharePoint can respond with the correct content as URL of a web request received
by IIS is not the same URL that the end user entered in their web browser
Best Practices
Default and Intranet should always be used, the rest are of course optional, but whatever naming convention you use, be consistent!
Default: always the FQDN in the form of “http://WEBAPP.Company.com” (or “http://WEBAPP.domain.local” – whatever
your FQDN format happens to be )
Intranet: Just the name of the webapp itself in the form of “http://WEBAPP” It is important to use a single
name, without any “.”s in the name, as some windows applications will see “.” in the address and will assume “Internet” zone for the address, which can lead to some interesting authentication issues with Microsoft Office applications.
Internet: Almost always prefixed with "WWW” in the form of “http://www.WEBAPP.Company.com” – this identifies
the access URL as a public facing or externally accessible site.
Custom: I have never used this field for anything more than specialized one-off URL testing and sometimes for SSL
cert verification (which generally should go on the load balancer anyways)
Extranet: Every company will be different, but I like to use the “PARTNERS” prefix, in the form of "http://partners.WEBAPP.Company.com”
Amit Kotha

SBS 2011 GPO for changing the default save path applying to Win7 but not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
Thanks in advance.

When a group policy is not applying, it is often that it has been linked to the wrong OU. Please first check this.
You might also check the apply status on the client site based on the GPSVC.log.
How to enable GPO logging:
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
It looks more like an issue on server side than an issue of Office Group Policy settings. Try to post in Server forum and see if there is any luck:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

Want to change the default save location- users have networked home dirs

I am doing some work for a school which is still using iMovie HD because it allows them to save their movie projects wherever they want. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. Currently all users/students have network home folders, so their home directory, documents, etc all pull across the network. All students are limited to 1GB of space, and the system is an older G4 Server- 2GHz with 1GB of RAM and 2x 500GB hard drives. Since the students can make some large projects transferring that data back and forth can kill the server. Currently they are staying with iMovie HD so they can save it to the local hard drive, and when the student comes back in for class they sit at the same machine- thus giving them access to their stored movie files.
This summer they plan to upgrade both Xserves, but again internal storage in the Xserve is a joke and in my opinion not planned out properly. Which might require them to use one of the Apple Promise RAID units- major financial burden on a school.
I wanted to see if there was a way to change the default save location for iMovie 08 or 09 to the local storage rather then the "Home" folder for each user.
Thanks so much!

hackths wrote:
.. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. ..
wrong info.
iM08/09 has a different file concept than iMHD6.
Both versions allow to store Events (=huge files) 'anywhere' to usb or firewire connected, hfs(+) formatted harddrives. the Project files (=small files) can be de-located from 'internal' drive with vers09, for 08 you have to use a socalled symLink to de-locate Project files.

Changing Airdrop Default Save Location

Hello All,
Thanks in advance for any help you can provide. Simple question...
There has to be a way to change the default save location of AirDrop. Has anyone stumbled across this?
~ lbcSSA

Hi Jeffrey,
your solution is nice for people who don't care about spoiling their system disk, which I agree must be numerous today.
But would you possibly have another suggestion to avoid documents sent via Airdrop to end up at all on the System disk ? I mean, just as one can do it for the Safari or Mail downloads, where you can define a default folder located on a different hard disk ? I'm with a MacPro, and System disk is intended only for... system, not files, so to avoid fragmentations issues from multiple erase actions of unnecessary files.
Is it possible that Apple writes "default folder" and forgot that "default" means one can opt for an alternative solution ??? Has Apple gone that un-professional ? Please tell me I've just missed a line somewhere... and that I don't have to rely once more on a third party app...
Cheers !
Config
Yosemite OSX 10.10.1
Mac Pro (Late 2013)

Issue changing CutePDF default filename

Similar Messages

Maybe you are looking for