Issue connecting Consumer Proxy from SCL to SAP ECC

Hi all,
We are trying to connect duet Enterprise with an ECC 6.0 Ehp4 and we have an issue with connecting through a Costumer proxy from SCL to ECC.
1-     The wizard is not creating properly the logical port.
2-     In SOAMANAGER->Technical Administration Tab- the system connections is having issues, the connection doesn`t appears.
3-     In SOAMANAGER-> Service Administration Tab->Business Scenario Configuration:
When we make changes to DUET_STARTER_SERVICES_ALL, it activates too quickly, is not seen the u201CSOA Configuration Request Queue Managementu201D progress so if I change to another Business Scenario it works as expected.
I left you some screenshots of those issues. If you need more information abut the systems or configurations just ask for. Thanks and I hope you can help me.
[SE80 Service Consumer|http://www.image-share.com/upload/706/136.png]
[SE80 ServiceGroups|http://www.image-share.com/upload/706/137.png]
[SoaManager System Connections|http://www.image-share.com/upload/706/138.png]
[Business Scenario Configuration|http://www.image-share.com/upload/706/139.png]
[Web Service Administration|http://www.image-share.com/upload/706/140.png]

Hi Eduardo,
I do not fully understand. Are you currently trying to configure the out of the box service "Starter Services" or are you developing your own scenario (ZCO_SALES_ORDER...)?
From your "SoaManager System Connections" screenshot it looks like the connection to your backend system was not created successful. If you used the Wizard, can you also try to follow the manual steps from the documentation (Chapter 3.3.2 Configure the Service Provider for Starter Services Endpoints). Maybe you will face the same problem as [here|System Connection Wizard;
Regards,
Holger.

Similar Messages

Issue in sending IDOC from BODS to SAP

I am getting issue while sending IDOC from BODS to SAP.
Job is getting failed with error : "No authorization to send Idoc with message type CREMAS"
I have checked last authorization in SU53 and it is Successful !!
What would be reason because of which job is getting failed with Authorization error?

Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
if you need more information refer this document:
How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

How to Consume WSDL FROM PeopleSoft to SAP

How to Consume WSDL FROM PeopleSoft to SAP
Points will be rewarded
thank you,
Regards,
Jagrut BharatKumar Shukla,

HI
Please refer to the following links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5d4a6e3-0601-0010-6aa9-ac3a1f747ea5
http://www.mindtelligent.com/pdf/details.ppt
http://www.bea.com/content/news_events/white_papers/BEA_WL_Adapters_ds.pdf
http://www.oracle.com/technology/products/applications/Events/OOW-2005/S3534_Doron_Avizov.pdf
http://download.microsoft.com/download/8/9/5/89585721-4774-4b5e-856b-c9db5d2980b3/Application%20Integration%20Fact%20Sheet.pdf
Regards
Ravish Garg
<i>
Reward if useful</i>

How to copy/send text file from FTPS to SAP ECC File Port

Hi Frdns,
I am working on one design, actually my requirement as follows
I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
I identified some approaches to full fill the requirement
1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
I am looking forward t implement the second approach because it saves lot of money to my client.
Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
Regards,
Raj

Hi Raja,
>>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
1. Sender agreement (mention the sender interface as anything XYZ)
2. Sender communication channel. Pick the file in binary mode
3. Receiver determination (keep both the sender and receiver service as same)
4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
5. Create receiver agreement (with same service and interface)
6. Use file adapter here
Regards
Suraj

Issues during technical upgrade from 4.6c to ecc 6.0

Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BE

Hi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala

Issue in Migrating Attachments from Siebel to SAP CRM

Hi All,
We are doing Data Migration for Attachments into SAP CRM from Siebel. and have an issue for migrated attachments showing blank pages while opening in SAP CRM.
We have used all the formats of converting the data into binary and loading the attachments from Application Server.
But the PDF/File open with blank pages. The no. of pages in the original attachment and the migrated file from application server matches.
May i know the best approach of meeting the above Requirement .. Its prioritized issue !!
Thanks a lot !!

Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
if you need more information refer this document:
How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

Issue connecting via proxy client in SQL Developer 4.0

Hi SQL Developers,
I should have posted this earlier, as I have been using SQL Developer 4.0 for several months and noticed the issue some time ago. The environment I am connecting to uses a Windows ISA Proxy desktop client to allow traffic to some databases. I generally use the Oracle Client and OCI connections in SQL Developer. At some point during the SQL Developer releases, connectivity stopped working for certain databases behind the proxy.
The following clients connect to the database behind the proxy without issue:
SQL*Plus 11.2.0.1 64-bit
SQL Developer 4.0.0.12.84 using the SQL*Plus client and OCI
Connectivity to the database behind the proxy does not work with these versions:
SQL Developer 4.0.0.13.80 (tested with Oracle client, thin, etc.)
SQL Developer 4.0.0.13.30 (tested with Oracle client, thin, etc.)
Error Message:
An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vendor code 17002
Connectivity to other non-proxied databases works for all clients above. I've tried re-creating the connections, re-installing, etc. Nothing works except going back to the earlier version of SQL Developer.
Has anyone else experienced this behavior? I am trying to determine whether the proxy is stopping the client based on a signature or if the client is not routing the connection correctly.
Thanks,
Shad

I think I have found a solution.
Run the command prompt (CMD) in windows and type in the following:
setx _JAVA_OPTIONS -Djava.net.preferIPv4Stack=true
I got this from a java developer and now I'm able to connect

Monitor Out Issue and 2K proxy from RED Issue

I'm having two monitor issues since I updated to FCS3 (Color 1.5)
The first is with most footage.
Most any footage that I bring into Color 1.5 using the "Sent to" feature from FCP7 (720p, 1080p, etc) will not be displayed in my external monitor (JVC DTV). This was not a problem in previous version of Color or FCP. When I adjust "Video Output" in my Color Preference from SD to HD 720p, 1080p etc... My monitor recognizes that new input. It tells me that it is no receiving a signal in a different frame size (rate). I have tried every combination of monitor setting under the sun in the Color Preferences Room and nothing will change that. (This is not a universal issue). I DO NOT HAVE ANY OF THESE ISSUES IN FCP7. There are only two ways I can see this footage, the first is in my Projects Settings bin in my Preferences Room. If I change my Resolution Presets to any of the 4k options, I see a tiny picture in my external monitor. The other way I can see an image in my external monitor is to go into my Secondaries Room, enable a secondary, goto the preview window and select the Color Matte tab (the middle of the 3 tabs on the upper right of the picture).
The second issue I'm having is with RED proxy files. When I bring into Color 1.5 2k proxy files from the RED everything works and plays fine (in all monitors) except there is a black artifact (bar) along the bottom right. Again this is not the case when I'm looking at these same files in FCP7.
Any help fixing these problems would be greatly appreciated ASAP. I'm scheduled to be grading a $600,000 dollar film in the coming weeks.
Thank you
Color vs 1.5
QT 7.6
GFX Card: VIDIA GeForce 7300GT
PowerMacG5 (Quad Processor)
MacOS 10.5.7
RAM: 4 GB
AJA Kona: 6.0.5 (also went back to my old 6.0.2 with the same problems)
Monitor: JVC DTV- checked this in multiple monitors with the same result

My Project settings are exactly what i want for this given project (as example)
Resolution Preset 1280 x 720 HD
Frame Rate 59.94
Width 1280
Height 720
Printing Density: Linear (0 Black - 1023 White)
Render File Type: Quicktime
Quicktime Export Codec: Original Format (But tried different options here with no result)
Geometry room looks clear, Scale, AR etc are all standard 1 or 0

Error while activating webservice-consumer-proxy

Hi,
I'm trying to generate a webservice-consumer-proxy from a Salesforce.com-WSDL-File. When trying to activate the proxy I receive an error-message from class CX_ESD_EXCEPTION stating "Beim Aktivieren des Proxys ist ein Fehler aufgetreten." (in english: "Error occured when activating the proxy"). The WSDL-File is SOAP-Version 1.1, Document/Literal.
Thank you very much in advance,
Olli
[SAP Consulting by mindsquare|http://mindsquare.de]

I have a similar issue and it says that the reason is one of the exception classes in XML in not derived from either cx_static_check or cx_dynamic_check.
Please let me know if anyone have ideas how to resolve this

Consumer-Proxy authentication via x.509 Certificate

Hi experts,
I want to consume a service from a erp system and authenticate via x.509 SSL Certificate. But in soamanager there is no checkbox for this authentication method when I create the logical port. Only u201CUser Id / passwordu201D and u201CSAP authentication Assertion Ticketu201D are existing under consumer security. Has someone any idea / hint? I have no Idea how I can solve the problemu2026

The Basis Team installed the x.509 client certificate.
The logon to a service which is running on SAP ECC 6.0 works via SSL and Client Certificate. (Configuration in SOAMANAGER
     Provider Security -> Transport Guarantee Type: Https
     HTTP Authentication: x.509 SSL Client Certificate via Https)
But the authentication to a consumer proxy from SAP to a legacy system only works vie http and username / password at the moment
In SOAMANAGER -> Logical Port -> Consumer Security there is no opportunity for SSL oder Client certificate. There are only the two opportunities:
     User ID / Password
     SAP Authentication Assertion Ticket
In SOAMANAGER -> Logical Port -> Transport Settings: there is an opportunity to select Https. Is this selection enough for x.509 Client Certificate and SSL?
Someone an idea how to configure a consumer proxy (SAP ECC 6.0) for certificate authentication?

Anyone having issues upgrading RFC apps from ECC 5.0 to ECC 6.0 ?

We are having issues upgrading our simple RFC app from ECC 5 to ECC 6.
we are using the librfc32u.dll ( 710_Rel) to make a simple call to return MARD table entries.
Runs great in our 5.0 system.
When we run against our 6.0 environment with the same dll, we get garbage back in the table results... (escape characters ).
We have tried downloading the latest 7.0 librffc* ( standard an u ) . We recompiled to embrace both unicode and non-unicode. ( fyi our 6.0 environment is unicode ) . All attempts have failed to date.
Has anyone else experienced issues trying to upgrade their rfc applications?

david, were you able to fix this issue? i have a similar issue. we are upgrading from 4.6c to ecc 6.0. we use a c# program that connects thru sap connector for .net v2.0. it calls a rfc function module, it connects and passes some data, but not all data to the rfc.
any help would be appreciated.
thanks.

Error Creatu00EDng Consumer Proxy

Hi,
I am currently trying to create a consumer proxy from an simple free web service. The used WSDL can be downloaded there:
[http://www.thomas-bayer.com/axis2/services/BLZService?wsdl]
After doing the diffrent steps of the wizard ( "Select Source", "Enter Package/Request".....) I got following errors in transaction SE80:
Proxy-Generierung: Fehler aufgetreten
Exception occured in library handler
Not implemented
Could anyone help? Perhaps you can use the same web service and try to create an consumer proxy.
How can I see, what exception occurred in the library handler?
Thank You and Best Regards, Eddy

Hello,
this WS worked for me:
http://www.webservicex.net/airport.asmx?wsdl
Bye
Gabriel P.-

SAP BODS and SAP ECC integration for Sales data

Hi Folks,
I have a requirement to load sales data from BODS into SAP ECC. Could you please suggest me a best approach for this?
I really appreciate your prompt response.
Thanks,
Daniel.

Hi Daniel
What sales data you want to migrate?. Like
1) Customer master
2) Pricing Condition
3) Sales Order
4) Customer Sales Area
5) Scheduling Agreement
6) Schedule Lines
7) Customer Material Info Records
What you want to migrate. Evyerything is possible only by IDOC's if the volume of data is less( < 100000). If its more they the best option is only by BAPI method.
please provide the exact requirement then we can through some light on it.
Regards
Vijay Mukunthan

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

Web Service Call From Consumer Proxy in ABAP: Security Settings

Hello All,
Have a couple of questions:
We are working on a scenario where we have to connect to a web service from ABAP. We have extracted the WSDL, and generated the client proxy, and configured a Logical Port. However, at the time of actual call, we receive an error message "Header http://schemas.xmlsoap.org/ws/2004/08/addressing:Action for ultimate recipient is required but not present in the message.". We suspect that this is a problem with the SOAP Header, which might be missing some tags, which are required by the Web Service. Problem is, we can not trace the Web Service SOAP Header. We can not see it in SOAMANAGER, or any other transaction as such.
1. Does any body have an idea where to look for the complete SOAP Request, in case of a Consumer Proxy call?
2. After re-configuring the Logical Port in SOAMANAGER, our scenario is now stuck at an error which says: 'SoapFaultCode:1 Security requirements are not satisfied because the security header is not present in the incoming message.'. This is probably happening because the target web service is WSE 3.0 compliant, and hence it is asking for UsernameToken and TimeStamp attributes in SOAP Header. In SOAMANAGER Logical Port configuration, we do not see a placeholder for providing this information. However, in earlier LPCONFIG transaction, there was a field for providing WS Security Profile for Operations. Where does this config lie in SOAMANAGER?
Awaiting Replies.
Thanks and Regards,
Sid

Hi Sid,
The setting username/password in the manual logical port configuration will send the username and password in the http header as basic authentication. That's why you don't see a security header.
To configure usernametoken you have to create the logical port out of a WSDL. This WSDL needs to contain WS-Security Policies . So in the policy section of the WSDL you see an XML element called UsernameToken.
In order to let .Net generate a compatible WSDL you have to configure your WCF Web Service to use a CustomBinding with authentication "UsernameOverTransport". This is a username token in the security header send over SSL. So therefore you need an HTTPSTransport (instead of HTTPTransport) in the binding of your .Net WCF endpoint as well.
For an example of such a WCF service configuration see my comment on http://weblogs.sdn.sap.com/cs/user/view/cs_msg/59671.
Regards,
Mathias

Issue connecting Consumer Proxy from SCL to SAP ECC

Similar Messages

Maybe you are looking for