Issue connecting to WRVS4400N using QuickVPN Client

Hello,
I am getting the attached error connecting to the WRVS4400N using the QuickVPN. I get the error from both Windows XP and Windows 7 64-bit. It has worked fine to a long time and then got the error when I tried to connect off of my hotspot and then tried again from home as normal and am always getting the error. Another user started getting the error a few weeks after me and she is the one using XP.
I have tried to reinstall, running as different compatibility O/S, running as admin, different userid/password, using remote DNS setting, rebooting router twice and many other things. I can connect to the router via remote management with no issues and it seems to be working okay.
Would appreciate a resolution. This is causing issues for remote access that is very much needed.
Thank You!!

865954 wrote:
i have set ORACLE_SID=ORCL even then we need to mention the SID as
sqlplus system/manager@ORCLno, we don't need to include *@ORCL* if we want to connect to ORCL, but we need to add sid name if we want to connect to different sid.
you can connect as sysdba by
sqlplus sys/manager@orcl as sysdba

Similar Messages

VPN connection to WRVS4400N using a Samsung Galaxy tablet

I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco. I have no issues at the moment using Quick VPN from my laptop.
When using the Any Connect software I receive the following messages:
Security warning: untrusted certificate
AnyConnect cannot verify the identity of <IP address>. Would you like to continue anyway?
- Certificate does not match the server name.
- Certificate is from an untrusted source.
- Certificate is not identified for this purpose
[Accept] [Details] [Cancel]
If I select accept, the following error is received:
"Error: Connection attempt has failed due to server communication errors. Please retry the connection".
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.
Any assistance would be greatly appreciated. Thanks.

Hi Blair,
The WRVS4400N only works with the QVPN software. The only small business router at this current time works with the Cisco any connect vpn is the SA500 series routers.
I hope this helps.....
Thanks,
Tori Woods
Cisco Support Engineer
CCNA, CCNA Wireless

Satellite P10-835, Instructions to connect to wifi using Atheros client utility?

i have a P10-835 and need to configure the Atheros client utlitiy to connect to a Netgear 834G wireless router. Are there any instructions on how to configure the Atheros client?

Hello
1. START button > All Programs > Atheros > ACU > Atheros Client Utility
2. 2. Select "Profile Management" tab an click on "New"
3. Put the right Profile name and Network name
4. Check Security tab and put the password if your network is encrypted
5. Check also if the windows wireless configuration disabled it
(IT MUST BE DISABLED if you use some client for wireless connection)
You can find this option in Wireless Network Connection properties under Wireless networks.
Bye

Connect to Oracle using DAC Client in command line

Hi,
I'm trying to connect to Oracle DB using DAC client. I have configured a connection and tested, it works. When I use the connection to connect to the DB, its giving me an error
"unknown error, please start in command line mode and see the stack error"
How do I start in command line mode? Could anyone provide more information on this.
Thanks in advance,
RK

In oracle db, you can create 3 different types of users:
(1) create user x identified by pwd.
In this case the user x will connect to the db using username/password, in this example x/pwd
(2)create user ex identified externally;
In this case the user ex will connect to the db using "/" and the sqlnet.authentication_services parameter value in the client and server sqlnet.ora will be used in determining the oracle external authentication adapter to use. For oracle windows client/db server, this is by default set to NTS. NTS is the oracle windows authentication adapter.
(3)create user gx identified globally as 'CN=gx,O=Oracle';
In this case also the user gx will connect to the db using "/" and oracle ssl will be used to authenticate this user to the db.
It would not be possible to "Create user x identified externally" and connect with x/pwd.
Please clarify.
To help you in isolating the problem, I will need the following info:
(1)
what are you connecting as to execute your plsql. Are you using sqlplus ? How are you connecting (connect "/ as sysdba", connect "/", connect x/pwd) ?
(2)
what create user statement did you use to create the user
(3)
is odp.net and the db server on the same machine.
(4)
did you run your plsql from the same machine as the db server.
(5)
if odp.net is on a different machine than db server, did you try connecting from odp.net machine to db server, using sqlplus ?

ORA-12154: TNS:could not resolve the connect identifier specified using TOAD client

I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.

948021 wrote:
I try to using connect with remote database using TOAD client. My oracle version is 10.2g. I follow these instructions that specified on this link, instead of step 13, because i cant understand what they explain http://http://avangari.wordpress.com/remote-oracle-database-access-using-instant-client-and-toad/ . My Oracle TNS_ADMIN path is C:\oracle\product\10.2.0\db_1\network\ADMIN and ORACLE_HOME is C:\oracle\product\10.2.0\db_1. I found many question regarding this query, but i am not found my answer.
see: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ (ora-12154 TNS:could not resolve the connect identifier specified)
And for background info
see: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
see: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ ( Help! I can’t connect to my database (part duex) )

Can connect to exchange using eM Client, but not Outlook 2013

Hi There,
I have been using eM client to connect to an exchange server with no problems for months. The reason I chose eM Client was because it was free (ha) and it could sync my email, calendar and contacts using Exchange Web Services (EWS).
But then I decided to make the plunge and get myself an Office account so I could use Outlook. The problem is I just can't connect. I have to use a address in eM client that ends with ews/exchange.asmx to connect, but for there is no option
to that in outlook.
Thanks for any help.
Mike
(Also, in case I am in the wrong place, I was referred here after I posted @ answers.microsoft.com)

Hi Mike,
Is there any update on this thread?
As Ed mentioned, have you checked the settings of outlook anywhere ?
In addition, you can refer to the following article to configure:
Configure Outlook Anywhere in Outlook 2013
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Issues connecting remote server using PSSESSION

Hi All,
I need to execute powershell on servers behind firewall, i set server to use 8530 port (which we opened for patching) so i can reach DMZ server from Non-DMZ via 8530.
Below commands Configured on DMZ Server
Set-Item WSMan:\localhost\Service\EnableCompatibilityHttpListener -Value true
Set-Item wsman:\localhost\listener\listener*\port –value 8530
set-item wsman:\localhost\Client\TrustedHosts -value (non-dmz desktop from where i plan to run Powershell script)
While executing the below command
New-PSSession -ComputerName " IP" -Port 8530 -credential $cred
i am getting following error
Connecting to remote server failed with the following error message : The WinRM client cannot process th
e request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS
or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure Trus
tedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set T
rustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting He
lp topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
eption
+ FullyQualifiedErrorId : PSSessionOpenFailed
If i execute with NAME
Invoke-Command -ComputerName HAMWINWIZP015 -ScriptBlock {Get-Process} -Credential $cred
Connecting to remote server failed with the following error message : WinRM cannot process the request.
The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us
e HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information,
see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
Could you suggest what would be the issue & if possible please help me to use that DMZ Server as proxy server as i am willing to run powershell on few DMZ Server via the one server.
Ganapathy

Hi Ganapathy,
I am trying to involve someone familiar with this topic to further look at this issue.
There might be some time delay. Appreciate your patience.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support

Issue connecting to VPN using hotspot

I want to connect multiple devices to the Hot Spot and use the VPN connection to connect back to my office. How do we make that work?

I connect to the VPN and can remote desktop or use my Citrix Client using the iPhone Apps with no issues but need to also add two laptops using the VPN connection through the hotspot. I have tried the PPTP and the L2TP connections.

How to connect sql server using oracle Client

Hi,
I am working in oracle9i and windows os 32 bit.
I need to connect SQL server 2000 from my oracle client..
I heard about heterogeneous connectivity ...
Please expalin me the steps what to add and how to connect the sql server...
Regs....

Are you trying to connect to SQL Server from your Oracle database (i.e. create a database link in Oracle to SQL Server)? Or are you trying to connect to SQL Server using your Oracle client software (i.e. SQL*Plus)?
The former just requires Heterogeneous Services with Generic Connectivity. The latter is functionality that has been depricated and probably no longer works in your environment.
Justin

"Connection refused" when using Java client for Web Service

I deployed a web service to Weblogic Server 7.0 running on Windows 2000. I can
use IE browser to see its WSDL perfectly but when I run the Java client, the proxy
method call generates the following error:
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:426)
at java.net.Socket.connect(Socket.java:376)
at java.net.Socket.<init>(Socket.java:291)
at java.net.Socket.<init>(Socket.java:119)
at weblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
lientBinding.java:412)
at weblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
lientBinding.java:390)
at weblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBin
ding.java:246)
at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
ndler.java:34)
at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
:131)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:417)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
javax.xml.rpc.JAXRPCException: Failed to send request:java.net.ConnectException:
Connection refused: connect
at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
ndler.java:37)
at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
:131)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:417)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
Exception in handler's handleRequest().
java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: Conn
ection refused: connect; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
186)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:459)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)

In your client program, when you do "new XXX_Impl(String wsdlurl)", did you
pass in the wsdl you were hitting with browser?
-Neal
"Ray Yan" <[email protected]> wrote in message
news:[email protected]...
>
I deployed a web service to Weblogic Server 7.0 running on Windows 2000. Ican
use IE browser to see its WSDL perfectly but when I run the Java client,the proxy
method call generates the following error:
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
atjava.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:426)
at java.net.Socket.connect(Socket.java:376)
at java.net.Socket.<init>(Socket.java:291)
at java.net.Socket.<init>(Socket.java:119)
atweblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
lientBinding.java:412)
atweblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
lientBinding.java:390)
atweblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBin
ding.java:246)
atweblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
ndler.java:34)
atweblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
:131)
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:417)
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
javax.xml.rpc.JAXRPCException: Failed to sendrequest:java.net.ConnectException:
Connection refused: connect
atweblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
ndler.java:37)
atweblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
:131)
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:417)
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
Exception in handler's handleRequest().
java.rmi.RemoteException: SOAPFault:javax.xml.rpc.soap.SOAPFaultException: Conn
ection refused: connect; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
186)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
207)
at CenterWSClient.main(CenterWSClient.java:73)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Connection refused:connect
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:459)
atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
a:359)
atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
181)

Issue connecting 5.0Ghz using Z3

Hi Sony Support and Z3 Users,
I need some help and clarification. I just got a brand new Dual-band modem that has 2.4Hz and 5Hz wireless connection.
I was able to connect to 2.4GHz for Z Ultra, Z3 Tablet Compact and Z3 but my Z3 is the only one cannot connect to 5GHz. Can I check what happened? Does anyone having the same problem like me with Z3. Is it firmware problem or hardware issue? My Z Ultra and Z3 Table Compact didn't have any problem with 5GHz so may I know what caused my Z3 refused to accept the 5GHz. Hope to receive your inputs.
Thanks

Hi,
I have the same problem with my Z3 Dual (D6633).
I have a Netgear WNDR3700 Dual Band Router (award winning).
Beside me I have an Acer Laptop with built-in Dualband connected to 5GHz and also a stationary PC with USB dongle dualband connected to 5 GHz. No difference moving the Z3 close to the router.
I have seperate SSID for 2,4 and 5 GHZ.
Booting into safe mode shows that 5GHz now available, saved and using WPA - but it won't connect. While in safe mode i tried connecting to 2,4 GHz with no problem - but then 5GHZ now shows "Not within reach" - as it does in Normal boot mode.
Apparently when I started up the Z3 for the very first time (2 month ago) I was able to connect to 5Ghz as I have filled in Password and saved this connection.
If this problem appeared before or after the newly firmware update - I cannot tell. I just saw this tread and checked the phone - just to dicover that I was not connected to 5 Ghz as I thougt I was.
Regards
Kim

How to handle multiple connection with ssh using JSCH Client?

Hi,
Can anybody help me regarding the topic said above?
Thanks in advance.

Use this forum to discuss general topics related to the Java programming language.
I don't even know what JSCH is, let alone would kno whow to provide product support for it.

QuickVPN client login issues

Hello,
I am using a RV180W router and using QuickVPN client ver 1.4.2.1 for remote access. Both the client and server are Window7.
I have create 4 users in the router. I can connect using one user logon but when I logout and try to connect with a different user it fails to connect.
Some times to user that initially connects will fail the next time a connection is tried.
Any ideas>>>>>
Thanks
Richard

Hello Richard,
Can you share what is noted in the logs of QuickVPN for the failed connection. You will find the log.txt file in Quick VPN folder.
Regards,
Kremena

Connections drop when using Cisco Anyconnect Secure Mobility Client

Folks I have a strange issues. I have a few laptops that I'm testing using the Cisco AnyConnect Secure Mobility Client Network Access Manager. We like the interface and overall are happy, but have one nagging issue. Periodically the connection drops when using the client, and the only way to reconnect is to choose the Network repair option on the client. That fixes it just fine, but we shouldn't have to do this. The same clients using the built in WIndows supplicant do not have this problem. We are on version 3.0.07059.

Right now I'm testing on a single access point (autonomous) with WEP! The same laptop works fine without the Cisco client. Usually it is several hours, 12 or more when it happens, but I've seen it less than that. And I've seen it up for over a day and a half. At this point I just don't trust the client to roll out to a larger audience.

RV082 - QuickVPN Client causes Windows 7 Bluescreen

Hi,
I have a Cisco RV082 and can successfully connect with the Cisco QuickVPN Client, 1.4.2.1. However, after 1 to 5 minutes I see the Windows 7 bluescreen indicating that the system has halted due to a problem with a driver. I have installed the latest Windows updates and reinstalled the client.
The bluescreen only occurs if I use the Cisco QuickVPN Client.
Can anyone assist?
Thanks
Michael

Hi Michael, Cisco does not have another supported VPN client for this model. You may use a 3rd party IPsec client such as shrewsoft or ipsecuritas or you may use the built-in PPTP feature.
It would be rather peculiar if the Windows error is generated because of the use of QVPN. Can you provide any additional troubleshooting information you have done?
-What is the firmware of the router?
-Have you uninstalled the QVPN software and reinstalled?
-Is it a particular file type or any file?
-Can you recreate this on multiple different computers and or operating systems?
-Can you provide an exact recreation scenario such as what file (or type), what server, any kind of particular transfer protocol, does this happen on different server platforms such as 2003, 2003R2, 2008, etc?
-When moving the same file from a non-server machine, such as a workstation with a map drive, does this persist?
-Tom
Please rate helpful posts

Issue connecting to WRVS4400N using QuickVPN Client

Similar Messages

Maybe you are looking for