Issue during integrating OIM 9.1 with novell edirectory 8.8

Hi,
We are trying to integrate OIM 9.1 with Novell edirectory 8.8 using novell edirectory 9.0.4.2 connector.
while privisioning i m facing the following issue
DOBJ.THROWABLE_IN_SAVE Unhandled throwable java.lang.NoClassDefFoundError in com.thortech.xl.dataobj.tcScheduleItem's save.
User is getting created OID but not provisioned to edirectory.
Thanks in Advance
Manju

Hi,
Thanks for responding.
I am trying to provision users to novell edirectory.
I create user in Oracle Idenity Manager 9.1 then select the Resource profile and provision new resource(to edirectory 8.8).
During the last step of provisioning when i click continue button Oracle Idenity Manager is throwing the below error in the next screen with message "Provisioning is been initiated". But user is not created in the edirectory.
DOBJ.THROWABLE_IN_SAVE Unhandled throwable java.lang.NoClassDefFoundError in com.thortech.xl.dataobj.tcScheduleItem's save.
In the open tasks, System Validation task is created with the status Pending.
Please help me to rectify this issue.
Also let me know whether anyone has tried to integrate Oracle Idenity Manger 9.1 with edirectory 8.8 using Novell edirectory 9.0.4.2 connector.
Thanks

Similar Messages

Siebel SSO Integration with Novell eDirectory

I am wondering if anyone on this forum has worked with integrating a SSO solution using Novell eDirectory and Siebel. I have personally worked on SSO integrations with Siebel using Cleartrust and Siteminder and they are all basically the same concept however, I am facing issues trying to get the Novell SSO solution to work with Siebel.
I am using the standard LDAP Security adapter and I can make a basic connection into Siebel using LDAP. When implementing SSO I am using a "header" value and a custom userspec name that is different then then "Remote_Use" name mentioned in the Siebel SSO documentation. With SSO turned on I am successfully able to authenticate and almost get all the way into the home page of Siebel before the IE browser crashes. The SWSE log files, interestingly enough, show that my userspecsource is equal to header and that my userspec is correct and then I see the SISNAPI connection occurring between the Siebel We Server and the Siebel AOM but then after the IE browser crashes I see the SWSE log which then tries to picks up Siebel's default userspec " Remote_User" value which is not confiugred or turned on anywhere from within the application. I was just wondering if anyone else had faced similar issues when integrating Siebel into Novell eDirectory for SSO. I have also reviewed the configuration on Novell's side and they are protecting the correct object manager and are also using the same exact userspec name as what we have defined within the eapps.cfg of Siebel. We are using Siebel 8.1.1 Any ideas or help would be greatly appreciated as I have not gotten much support from my open SR on this issue.

I am wondering if anyone on this forum has worked with integrating a SSO solution using Novell eDirectory and Siebel. I have personally worked on SSO integrations with Siebel using Cleartrust and Siteminder and they are all basically the same concept however, I am facing issues trying to get the Novell SSO solution to work with Siebel.
I am using the standard LDAP Security adapter and I can make a basic connection into Siebel using LDAP. When implementing SSO I am using a "header" value and a custom userspec name that is different then then "Remote_Use" name mentioned in the Siebel SSO documentation. With SSO turned on I am successfully able to authenticate and almost get all the way into the home page of Siebel before the IE browser crashes. The SWSE log files, interestingly enough, show that my userspecsource is equal to header and that my userspec is correct and then I see the SISNAPI connection occurring between the Siebel We Server and the Siebel AOM but then after the IE browser crashes I see the SWSE log which then tries to picks up Siebel's default userspec " Remote_User" value which is not confiugred or turned on anywhere from within the application. I was just wondering if anyone else had faced similar issues when integrating Siebel into Novell eDirectory for SSO. I have also reviewed the configuration on Novell's side and they are protecting the correct object manager and are also using the same exact userspec name as what we have defined within the eapps.cfg of Siebel. We are using Siebel 8.1.1 Any ideas or help would be greatly appreciated as I have not gotten much support from my open SR on this issue.

Synchronization of OID and Novell Edirectory

I did set up OID to synchronize with Novell edirectory using dipassistant, bootstrapped it and run ODISRV with the correct configuration number. Novell edirectory is leading, admin is done in edirectory only. Authentication is done through external authentication at the edirectroy. Works too.
Adding users, groups and users to groups works fine. Even removing users from groups works ok. The only thing that does not work is deleting users or groups. They still exist in OID after removing them from edirectory.
I tried setting the 'check all entries' configuration parameter to true: no results.
Set the debug level to 511: I get debug info, but deletions are not detected at all.
Any ideas, anyone?
Robbert van der Hoorn
OSA it Automation

Part of the problem solved. This is a weird situation: allthough creating new entries is done every 60 seconds, reconciliation is done once a day (24 hrs, i.e. 86400 seconds..).
This explains (half) the sudden error message I get: after failing deleting one of the groups, reconcile stops. This group failed to delete for some reason, maybe because it came from a different bootstrapped profile, and domain mapping rules failed on this group. After deleting manually some problematic groups, reconcile works.
The weird thing however is this: the reconciliation period parameter IS NOT SHOWN in Oracle Directory Manager 10.1.4!!! (Tried 2 installations. on windows server 2003!) Using OID Manager 10.1.2 (same platform) however showed me this parameter, and after setting it to 60 seconds, reconcile does show up and log in the.aud files every minute (which may not be desired to run every minute in prod. situations off course). I know (now) this interval can be set using dipassistant.
Once reconcile is running, I get a new error in my trace file:
Unable to delete the entry :cn=agroup1,cn=roc,cn=groups,dc=rocvantwente,dc=nl as the binddn doesnot have permission to delete it javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights]; remaining name 'cn=agroup1,cn=roc,cn=groups,dc=rocvantwente,dc=nl'
[LDAP: error code 50 - Insufficient Access Rights]
Exception in reconcile()null
[LDAP: error code 50 - Insufficient Access Rights]
testImport : Error in executing reconciler: null
javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights]; remaining name 'cn=agroup1,cn=roc,cn=groups,dc=rocvantwente,dc=nl'
Update: problem occurs with groups only. Users can be reconciled perfectly.
The bind dn in this case is orcladmin.... ideas?
Thanks,
Robbert
Message was edited by:
Robbert van der Hoorn
(Problem not completely solved after all)
Message was edited by:
user536188

Has anyone integrated OIM 9.1.0.2 with ORM 10.1.4.2

Hi,
Has anyone integrated OIM 9.1.0.2 with ORM 10.1.4.2 on Oracle WebLogic Server.
Manju

Wat happened ?
Are you getting any error ?

Issue while integrating external LDAP with weblogic

Hi,
i am trying integrating external LDAP (OpenLdap) with weblogic 10.3. I created a provider and provided required credentials and able to see users and group of the LDAP into the weblogic console. I am also able to login in the weblogic console with the users available in the LDAP after assigning the admin role to the ldap group. But i when i see the user's property (by clicking on the user in the admin console) it only shows the tabs for General, Password and Group only. on the other hand if i see the users from DefaultAuthenticator, it shows the Attribute tab apart from the General, Password and Group.
Can anyone let me knwo how can we get the Attribute tab for the Ldap users.
thx,
Ajay

Hi Ajay
By default Weblogic has READ ONLY adapters for any External Security Providers that are configured like any AD Providers. READ ONLY means, you can only read the data from the ldap but not modify it, hence may be its not showing the Attributes tag. For Default Authenticator, see the first paragraph note in Attributes tab, that says the same thing. NOW, may be WLS can atleast show Attributes in READ only format, but it needs some sort of mappings to be defined. Say on Weblogic side, we have like firstName, lastName which on any typical AD will be like sn (surname = lastname), givenname (firstname) etc etc. This mapping is tough to generalize.
One thing for sure is, from Weblogic you cannot modify or edit any attributes for any user in external AD. If you really want to get those attributes, you may need to use some javax.ldap apis or some 3rd party ready to use tools/apis. I remember Weblogic Portal has a facility to configure a xml file that defines attributes mapping and get all attributes for any user. But again thats in Weblogic Portal product and not part of weblogic server.
If you have any SOA Software, they have some utilities for the same.
Thanks
Ravi Jegga

Issue in AD - OIM 11g

Hi,
In our environment we have integrated AD with OIM 11g.We are facing the below issue during update task.
1)When we are editing the process form of AD and updating any field e.g last name. , it is not reflecting in AD,
But the same is working fine when the update happens through recon.
Any one faced similar kind of issue??

Hi,
Also, with newer versions of AD (e.g., Win2K3), by default, AD can only be modified over a secure connection (e.g., LDAPS). If the connection to such an AD is via non-SSL LDAP, or even if it's an older AD, and the AD is configured to only allow modifications over a secure channel, modifications via non-SSL LDAP connections will fail, usually with a "unwilling to perform" or something similar.
Jim

Issue while integrating OID and BPEL.

Issue while integrating OID and BPEL.
We followed steps mentioned in for integration. WE have two SoA instances, home, oc4j_soa.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF
Before running configure_oid.bat script, we changed jazn.xml to include the contents that are available in home\jazn.xml.
The contents we replaced contain
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="my-realm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
configure_oid.bat ran successfully.
But when we try restarting SoA, it gives error. If we replace the above to point to XML-based jazn then SoA starts succcessfully.
Please let us know if we are missing anything.
Regards
Yatan

*1.) No I am not able to complete 2.1.3.3 step 3 the*
work list application is showing "authentication fail"
user look up is showing "unable to find the realm with name my-realm "
*2.) After 2.1.3.3 step 2, if I try restarting the SOA suite, it throws following error.*------------------------------------------------------------------------------------------------------------------------------------------------------------
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:ias_soa.myhost
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
2009-06-29 04:10:49.962--Begin log output for Mid-tier services (ias_soa.myhost)
2009-06-29 04:10:49.962--Processing Step: starting OPMN
2009-06-29 04:10:57.493--Processing Step: starting OPMN managed processes
2009-06-29 04:11:22.806--End log output for Mid-tier services (ias_soa.myhost)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: oc4j_soa
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="bg1ws0008:6201" http-status="206" http-response="2 of 3 processes started.">
<ias-instance id="ias_soa.myhost">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="91427687" pid="4148" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
<process-type id="oc4j_soa">
<process-set id="default_group">
<process id="91427688" pid="5856" status="Init" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="91427686" pid="5140" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
*3.) opmnctl status -all ?*
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl status -all
Usage:
opmnctl [<scope>] status [<options>] [host port]
Notes:
- if host,port is specified, contact opmn on host,port;
otherwise, contact opmn in local ias instance.
scope:
@instance(:name)*|@cluster
scope specifies how far to apply the query. To apply the query to
all known iAS Instances, specify "cluster". To apply the query
to a specific set of 1 or more iAS Instances, specify
"instance(:instname(:instname...))". If no names are supplied
in an instance scope string then the request is applied to the
"local" instance. In this context, "local" means the instance
containing the opmn server handling the request.
Default: local iAS Instance.
Options:
[ias-component|oc4j-group]=id
- filter output by ias-component name
- i.e. filter output by oc4j-group name
-l - pre-selected long output format:
%cmp32%prt18%pid7R%sta8%uid10R%mem8R%utm9R%por
-fmt <fmtlist> - output format (see details below)
Option "-fmt <fmtlist>" and "-l" are mutually exclusive
-fsep <string> - field separator (default:" | ")
-rsep <string> - record separator (default:"\n")
-noheaders - don't print a header
-c <count> - number of times to print status (default:1)
-i <nsecs> - seconds between each print (default:5)
-app [-l] - application status (optional long format)
-port - opmn "request" host and port (scope
argument invalid)
Format String Syntax:
<fmtlist> - A single string containing one or more statistic
identifiers concatenated together where each identifier has
the following format: %<statname>[<width>[<justification>]]
default: %cmp32%prt18%pid7R%sta8
<statname> - Must be one of the following:
ins - iAS Instance Name
cmp - iAS Component Id
prt - Process Type Id
prs - Process Set Id
idx - Index of process in Process Set
pid - OS Process Identifier
uid - Opmn Unique Id
typ - Name for this kind of process
sta - Process status
stm - start time (ms)
utm - up time (ms)
cpu - cpu time (ms)
mem - memory used (Kb)
pme - private memory (Kb)
sme - shared memory (Kb)
hpz - heap size (Kb)
por - Port List
<width> - The number of columns to use for this field. Output
less than this value will receive padding according to the
specified justification. Output more than this value will
be truncated and terminated with '~'.
default: the width of each datum
<justification> - How to justify output when less than the width.
Must be L, R, or C (left, right, or center justification).
default: L
4.) SOA Suite version ? *10.1.3.1.0*
5.) Did you manually tweak some configuration file or followed the documentation as it is ? I have followed the document as it is.
I have changed only jazn.xml available in ..j2ee/oc4j_soa suite to have the below section: This section was copied from jazn.xml of ..j2ee/home directory that has been automatically updated after running configure_oid.bat file
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="myrealm" >
     <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
     <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
     <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
     <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
     <property name="idm.token.type" value="HTTP_COOKIE" />
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
     <property name="ldap.protocol" value="no-ssl" />
     <property name="idm.authentication.name" value="JavaSSO" />
</jazn>
instead of
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com">

     <property name="idm.authentication.name" value="JavaSSO"/>
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
     <property name="idm.token.type" value="HTTP_COOKIE"/>
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>

     <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
     <property name="custom.sso.key.alias" value="ssoSymmetricKey"/>
</jazn>

MSI Neo2 K8N Platinum - Freezing Issue during games

First off greetings to everyone on these forums...
I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
*Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
*Increased voltages to CPU VID, AGP, and Memory
*Disabled/Enabled AGP Fast Writes
*Increased AGP Aperture from 64MB to 512MB
*Enabled/Disabled ATI/nVidia Speedup option in BIOS
*Forced AGP clock lock to 66-67mhz
*Relaxed/Aggressive memory timings
*APIC enabled/disabled
*Gate A20 turbo/normal
*Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
*Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
*Swapped HDD Cables
*Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
*Tried video drivers from 71.89 Official to 76.45 beta modified drivers
*Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
*Applied all the latest updates from Windows Update Website
*Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
*Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
*Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
*Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
*Hard Drive is KNOWN working from previous build
*CD/DVD-ROM drive is kNOWN working from previous build
*Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
*Used latency tweak to the video card
*Used Rivatuner to force constant performance level
*Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
*Used original GPU BIOS
*Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
*No background applications are running (not even antivirus)
*Used application to force maximum refresh rates for my monitor
*Memory passed MemTest86+ for over 24 hours
*System passed Prime95 and SuperPi for over 24 hours
*System seems stable in all non gaming related applications
*Checked through various troubleshooting procedures
*Disabled SBDRVDET.EXE using MSCONFIG
*There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
*Installed AMD 64 drivers from AMD
*Disabled DEP in boot.ini
*...and many other various tweaks and modifications.
System Specifications
CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
NIC - Onboard nVidia MAC, Disabled Realtek NIC
Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
Case - Thermaltake Damier Series 5000
PSU - OCZ Modstream 520watt (28A +12v rail)
HDD - Western Digital 1200JB 7200rpm IDE
DVD-ROM - Lite-On 16X DVD-ROM
Floppy - Mitsumi 1.44MB 3.25"
OS - Windows XP SP2/DirectX 9c
I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
The GameMaster...
*EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

Quote from: dacull on 25-May-05, 16:06:33
Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
The GameMaster...

SharePoint 2010 with LDAP authentication, using NOVELL eDirectory

One of my customers needs a SharePoint application that allows people to authenticate with either an Active Directory account (internal staff) or a Novell eDirectory account (external customers).
Using the following article as a base guide (http://blogs.technet.com/b/speschka/archive/2009/11/05/configuring-forms-based-authentication-in-sharepoint-2010.aspx)
I configured a claims-based test application that had Windows authentication enabled and Forms based authentication (FBA) enabled (this is on a Windows 2008 server and not a domain controller)
In the Membership provider name text box I entered "LdapMember"
In the Role provider name text box I entered "LdapRole"
In the web.config for the SharePoint Central Admin, I modified/added the following details right before </system.web>
<membership>
<providers>
<add name="LdapMember"
type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
userDNAttribute="dn"
userNameAttribute="cn"
userContainer="OU=people,O=validobject"
userObjectClass="person"
userFilter="(ObjectClass=person)"
scope="Subtree"
otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider" >
<providers>
<add name="LdapRole"
type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
groupContainer="OU=people,O=validobject"
groupNameAttribute="cn"
groupNameAlternateSearchAttribute="samAccountName"
groupMemberAttribute="member"
userNameAttribute="sAMAccountName"
dnAttribute="distinguishedName"
groupFilter="((ObjectClass=group)"
userFilter="((ObjectClass=person)"
scope="Subtree" />
</providers>
</roleManager>
I modified the SecurityTokenServiceApplication web.config with these details
<system.web>
<membership>
<providers>
<add name="LdapMemebr"
type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
userDNAttribute="dn"
userNameAttribute="cn"
userContainer="OU=people,O=validobject"
userObjectClass="person"
userFilter="(ObjectClass=person)"
scope="Subtree"
otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager enabled="true">
<providers>
<add name="LdapRole"
type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
groupContainer="OU=people,O=validobject"
groupNameAttribute="cn"
groupNameAlternateSearchAttribute="samAccountName"
groupMemberAttribute="member"
userNameAttribute="sAMAccountName"
dnAttribute="distinguishedName"
groupFilter="(&(ObjectClass=group))"
userFilter="(&(ObjectClass=person))"
scope="Subtree" />
</providers>
</roleManager>
</system.web>
I modified the web.config of the test application I created with these details
<roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
<providers>
<add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="LdapRole" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
groupContainer="OU=people,O=validobject"
groupNameAttribute="cn"
groupNameAlternateSearchAttribute="samAccountName"
groupMemberAttribute="member"
userNameAttribute="cn"
dnAttribute="dn"
groupFilter="(&(ObjectClass=group))"
userFilter="(&(ObjectClass=person))"
scope="Subtree" />
</providers>
</roleManager>
<membership defaultProvider="i">
<providers>
<add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="LdapMember" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword= "validpassword"
useDNAttribute="true"
userDNAttribute="dn"
userNameAttribute="cn"
userContainer="OU=people,O=validobject"
userObjectClass="person"
userFilter="(ObjectClass=person)"
scope="Subtree"
otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
With all of this configured, I can go to the new test site, I do see the form where I can choose either Windows authentication or Forms authentication. I can successfully login with Windows authentication, but forms authentication gives me me an error.
The server could not sign you in. Make sure your user name and password are correct, and then try again.
I can successfully login to a LDAP management tool, using the same credentials I entered on the form, so I know the username and password being submitted are correct. I get the following items in the event viewer
8306 - SharePoint Foundation - The security token username and password could not be validated.
in the SharePoint trace logs - Password check on 'testuser' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated. and
then this:
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
I monitored the LDAP server and did a packet-trace on the communication happening between the SharePoint server and the LDAP server and it is a bit odd. It goes like this:
The SharePoint server successfully connects to the LDAP server, binding the ldapserviceid+password
The LDAP server tells the SharePoint server it is ready to communicate
the SharePoint server sends an LDAP query to the LDAP server, asking if the name entered in the form authentication page can be found.
The LDAP server does the query, successfully finds the entered name and sends a success message back to SharePoint
The LDAP server sends notification that it is done and is closing the connection that was bound to theldapserviceid+password
The SharePoint server acknowledges the connection is closing
... and then nothing happens, except the error on SharePoint
What I understand is that the SharePoint server, once it gets confirmation that the submitted username exists in LDAP, should attempt to make a new LDAP connection, bound to the username and password submitted in the form (rather than the LDAP service account
specified in the web.config). That part does not seem to be happening.
I am at a standstill on this and any help would be greatly appreciated.

OK, our problem was resolved by removing any information about the ASP.NET role manager. Initially, we had information about a role manager defined in three different web.config files, as well as in the SharePoint Central Administration site, where there
is the checkbox to Enable Forms Based Authentication (you see this when you first create the new SharePoint app, or afterwards by modifying the Authentication Provider for the app.) In either case, you will see two text boxes, underneath the checkbox item
for enabling Forms Based Authentication:
"ASP.NET Membership provider name"
"ASP.NET Role manager name"
We entered a name for Membership provider, and left Role manager blank.
In the web.config for the SharePoint Central Administration site, the SecurityTokenServiceApplication app, and the web app we created with FBA enabled, we entered the following:
<membership>
<providers>
<add name="LdapMember"
type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="ldap.server.address"
port="389"
useSSL="false"
connectionUsername="cn=ldapserviceid,ou=sharepoint,ou=test,ou=location,o=validobject"
connectionPassword="validpassword"
useDNAttribute="false"
userDNAttribute="dn"
userNameAttribute="cn"
userContainer="OU=people,O=validobject"
userObjectClass="person"
userFilter="(ObjectClass=person)"
scope="Subtree"
otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager>
<providers>
</providers>
</roleManager>
useDNAttribute="false" turned out to be important as well.
So, for us to get LDAP authentication working between SharePoint 2010 and Novel eDirectory, we had to:
leave anything related to the role provider blank
configure the web.config in three different applications, with the proper connection information to reach our Novel eDir
Ensure that useDNAttribute="false" was used in all three on the modified web.config files.
Since our eDir is flat and used pretty much exclusively for external users, we had never done any sort of advanced role management configuration in eDir. So, by having role manager details in the web.config files, SharePoint was waiting for information from
a non-existent role manager.

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Itunes Freezes during Sync on 3G & 3GS with Vista 64 & 7-64 all USB ports

To start. I originally had an iPhone 3G over a year ago on this desktop running Windows Vista 64Bit. My phone was able to sync with the PC for about a month and stopped being able to sync. I received many error numbers and put support tickets in with no avail. I then upgraded to an iPhone 3GS. Still under Windows Vista 64Bit and could not Sync my phone. It consistantly froze during the sync process. I tried all USB ports on my PC. People said to try restoring your iPhone and iTunes. I tried that and then got stuck on my restore. I had a broken phone until I was able to sync with my laptop.
I now have the same desktop Acer AM3641-EQ8200A but I am running Windows 7 Ultimate 64bit. I have always had the latest iTunes version, and tried 32 bit and 64 bit versions of iTunes. I still cannot successfully sync my iPhone. If it sits there long enough it will freeze up, start to freeze my computer etc. I decided to try again last night after I got a new USB cord and had the same issue.
In addition, my girlfriends iPod will not sync to the desktop either.
I have been stuck doing syncs on my Netbook for over a year now. Optimization of 3,000+ photos is horrific on it, but it works.
People say to get an external USB that is self powered. Why should I have to do this and chance frying my PC?
The deal is this, the phones won't sync with the desktop but will sync with my netbook also running windows 7 ultimate. All USB drivers are up to date on both.
I have tried Reformatting and Installing Windows. Reinstalling itunes. Updating all drivers. Tried different versions of iTunes. I first called Apple Retail, they had no answer. I wrote apple a lengthy letter with all the Error codes, they said they would call me even though my warranty over the phone support was expired. Never got a call back after they heard my problem.
What can I do to rectify this? I am not the only one out there.

UPDATE:
After putting a USB 2 card in my mac, all worked properly. The problem seems to be using USB 1.1.
This is really tragic because:
+ many Macs don't have USB 2,
+ it is very difficult to find out out if USB 2 exists on your computer (why are no USB 1 or 2 details spelled out in system profiler ?),
+ there are no warnings as to the sort of issues that would be coming up with USB 1.1 (yes I know the specs clearly says USB 2, but it looks like it was working at first),
+ there are no spelled warning by the system (after all, the iTune, iPod combination could detect easily that the incorrect USB standard is being used and warn the user),
+ there does not seem to be specific advantages to use USB 2 (like speed) as the syncing peaked at 6MB/s, a speed achievable with USB 1.1
Come on Apple you can do better than this !

Issue during automatic Creation of Work Order from Notification

Hi,
I have a issue during automatic Creation of Work Order from Notification.
BADI implemented: NOTIF_EVENT_POST
BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
I am able to create Work Order successfully but after that i need to update notification header with created work order number.
But i am unable to update the same (VIQMEL-AUFNR).
Can anybody provide solution for the same!
Thanks,
Kumar.

Hi,
Any inputs on above posted issue!
Thanks in advance.
Thanks,
Kumar.

Automating Goods issue during Delivery creation

Hi all,
We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
Thanks,
Packia

Dear Siva,
As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
Please let me summarize, I am really desparate here:
This is only IM related, Not WM.
Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
Issue is not Aut. PGI.
VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
In the deliveries of correct processed shipping points I do not find any picking output type.
Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
There is no picking block active.
PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
Can you please try to help me out?
Tnx & regards,
Chris

Integrating SuccessFactors PMS solution With SAP HCM without saving any employee master data in SF

Hi Friends,
We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked in SF which will fetch the data from SAP On-Premise system to run the PMS cycle. Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
Please advice, is there any solution where with PI if we can achieve the above requirement of client.
Thanks,
Farhan

Hi Friends,
We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked in SF which will fetch the data from SAP On-Premise system to run the PMS cycle. Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
Please advice, is there any solution where with PI if we can achieve the above requirement of client.
Thanks,
Farhan

Error during precalculation Object variable or With block variable not set.

Hi
We are tyring to set up a precal server for broadcasting. The precal server is running on a windows 2003 server and the service is running under a local admin account.
When we try to run a test workbook, we get the email with the workbook, but there is no data in it.
The Precal server shows us the following log:
Connection transfer server BIPRD service sapgw00 system number
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
Precalculation request type: E, printer: , variant:
Request dispatched to precalculation DLL
S:RSRPREC:000 E ALEX
S:RSRPREC:000 E ALEX
Unresolved exception occurred on the precalculation server
E
Error during precalculation Object variable or With block variable not set.
S:RSRPREC:000 Object[] args String[] paramnames Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
Application server requires status report
Application server requires status report
Has anyone seen this issue?
Please let us know, if anyone has any ideas.
Thanks

Does the query in the workbook require variable input, and, if so, have you provided a variant in the precalculation setting?

Issue during integrating OIM 9.1 with novell edirectory 8.8

Similar Messages

Maybe you are looking for