Issue ( Enable the following services for this group on : ( None ), .....

I have found other topics about this, but they all say the issue is due to not running Open Directory in Master, but I am. I was wondering if there might be another reason due to why this has no options, because I would like to enable the wiki, but I have figure out that I can't until I some how get this option enabled to select wiki and blog.

What else is there to fill out on the general tab?
http://evilx.devel.ws/osx/Picture%203.png
http://evilx.devel.ws/osx/Picture%204.png
http://evilx.devel.ws/osx/Picture%205.png
http://evilx.devel.ws/osx/Picture%206.png
http://evilx.devel.ws/osx/Picture%207.png
http://evilx.devel.ws/osx/Picture%208.png
http://evilx.devel.ws/osx/Picture%209.png
http://evilx.devel.ws/osx/Picture%2010.png

Similar Messages

  • Wiki has no groups: 'Enable the following services for this group' is None

    Our Leopard Server is an OD Master and have followed the Wiki setup procedure detailed in the Web Services Overview PDF. Believe I have got that part configured correctly and am able to access the web/wiki frontend on our Intranet.
    Issue is that I am unable to get any groups to be available on the Wiki and therefore cannot actually do anything.
    I believe it is an issue with the 'Enable the following services for this group' setting as it always displays None.
    I have read various posts/discussions but am no wiser as to the issue.
    Sorry if this is a noob question, any help gratefully received.
    Matt

    Your not alone, I have this exact same problem.
    I'm running a fully working BIND 9 and OD Master, so that's not your issue. My groups are without a doubt in the /LDAPv3/127.0.0.1 domain.
    When I connect with Directory.app, all services are grayed out and cannot be enabled. If I attempt to enable them in WGM they appear to apply when I hit save, but if I focus another group and come back it says (None).
    My logs are below:
    Jul 8 17:01:48 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:01:48 airto servermgrd[92]: servermgr_web: Teams service started
    Jul 8 17:01:52 airto com.apple.wikid[3816]: Removing stale pidfile /var/run/wikid.pid
    Jul 8 17:05:58 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:06:00 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.001849 seconds!
    Jul 8 17:06:15 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
    Jul 8 17:06:16 airto servermgrd[92]: servermgr_web: Teams service started
    Jul 8 17:06:18 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.003159 seconds!
    Jul 8 17:06:19 airto com.apple.wikid[4222]: Removing stale pidfile /var/run/wikid.pid
    Jul 8 17:06:51 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:06:53 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.001768 seconds!
    Jul 8 17:07:04 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
    Jul 8 17:07:05 airto servermgrd[92]: servermgr_web: Teams service started
    Jul 8 17:07:07 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.003067 seconds!
    Jul 8 17:07:07 airto com.apple.wikid[4238]: Removing stale pidfile /var/run/wikid.pid
    Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: htcleancache disabled
    Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: Multi instance key 'SSLLog' has a single value=''!
    Jul 8 17:13:50: --- last message repeated 2 times ---
    Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: Multi instance key 'Weblogs' has a single value='{\n enabled = 0;\n}'!
    Jul 8 17:13:51 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:14:03 airto servermgrd[92]: servermgr_calendar: created default calendar virtual host
    Jul 8 17:14:08 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:14:10 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.005470 seconds!
    Jul 8 17:14:13 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
    Jul 8 17:14:16 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.029467 seconds!
    Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: htcleancache disabled
    Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Multi instance key 'SSLLog' has a single value=''!
    Jul 8 17:14:23: --- last message repeated 2 times ---
    Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Multi instance key 'Weblogs' has a single value='{\n enabled = 0;\n}'!
    Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Teams service started
    Jul 8 17:14:28 airto com.apple.wikid[4383]: Removing stale pidfile /var/run/wikid.pid
    Jul 8 17:14:32 airto servermgrd[92]: servermgr_web: htcleancache disabled
    Jul 8 17:14:33 airto servermgrd[92]: servermgr_web: Teams service stopped
    Jul 8 17:14:33 airto servermgrd[92]: servermgr_web: Teams service started
    Jul 8 17:14:37 airto com.apple.wikid[4409]: Removing stale pidfile /var/run/wikid.pid
    Jul 8 17:28:07 airto ipfw[189]: limit 1000 reached on entry 12306

  • Enable the following services for this group on: Resets itself

    We have integrated OSX & active directory.
    Everything seems to be working fine, active dir users can log on to OSX 10.5.5
    The WIKI & Blog is the only issue. It doesnt authenticate. We have patched, but nothing new happened.
    I have noticed banging my head against WGM that when i make a LDAP group > add a AD user into that LDAP group and try and enable the right server, select wiki and blog and click save. When i go to another group and then go back to the wiki enabled group, its reset to (none)?
    Anyone got any ideas? This is the only part of our integration that is slowed us down.
    cheers
    James

    Ok, i have rebooted and it seems to be enabled, sounds like i might have been logged into an account that couldnt save?
    I still cant get AD users to authenticate on the BLOGS service?

  • Enabling the wiki service for a group not working

    Hey all,
    I am getting my server up and running and I have the following services: AFP, DNS, and Web. I am currently trying to enable the use of a Wiki but am running into some problems. I have enabled Wiki and blog in the Web Services in Server Admin and I have added the groups I wish to be able to use the Wiki. When I go to Workgroup Manager, I get stuck. In the Accounts tab and the group I am trying to give access to, I attempt to use the pulldown tab to "Enable the following serves for this group on:" I would like to get the pulldown to be set on "Default web site of server17.pretendco.com, but I cannot even use the pulldown. It is grayed over, and I cannot change the settings.
    I am using the Administrator account, so I should be able to change that. Any ideas?
    Thanks
    Pat

    Hi
    The reason the option is grayed out for your users is because your server is not an OD Master. Wiki, Blog and iCal won't be available unless this happens first.
    Page 61 Web Technologies Admin Manual
    Wiki will not work without a local Open Directory master. Your server can be connected
    to another directory server simultaneously, but for wiki to work, your server must be an
    Open Directory master. For more information, see Open Directory Administration.
    You can download the relevant manuals from here:
    http://images.apple.com/server/macosx/docs/WebTechnologies_Adminv10.5.pdf
    http://images.apple.com/server/macosx/docs/OpenDirectory_Admin_v10.5_2ndEd.pdf
    Other manuals may also be of use:
    http://www.apple.com/server/macosx/resources/
    Open Directory requires a tested and configured Internal DNS Service resolving on the forward and reverse lookups. DNS does not need to be running on the server itself just as long as it is running on a server on the same network. Don't confuse internal DNS Services with the external ones you are used to.
    Tony

  • Enable the following services on Groups option missing in Workgroup Manager

    Hi All,
    On our Leopard Server 10.5.8 I can happily enable Mailing lists inside the Workgroup Manager,
    But this option is totally missing in Snow Leopard Server 10.6.4, the whole "Enable the following services for this group on" is gone.
    I have already created a Web Host with all the options ticked.
    Any help would be appreciated!

    I actually figured that out late yesterday evening.
    I only say one thing: Read the F#&%/#% manual...
    It is clearly stated in there!
    Just didn't bother looking in it.
    Sorry for wasting everyones time.

  • Errors wcu-015: your form must contain the following bean for this function to be available : oracle.forms.webutil.file.filefunctions;

    my technical
    envirement:
    1_ Oracle
    Entreprise Manager version 9.2.0.1.0
    2_ Forms [32
    Bit] Version 9.0.2.9.0 (Production)
    3_ Oracle
    JInitiator: Version 1.3.1.9
    4_ WebUtil
    Version 1.0.2(Beta)
    5_ window xp
    service pack 2 build 2600.
    6_Internet
    Explorer 8 Version 8.0.6001.18702
    I m developping
    a form txt.fmb
    The obejective
    of this form is to open metars.txt file loctated in “c:\metars.txt”,
    through which read climate data for exapmle (temperature =25, humudity = 60) to
    finaly insert them into metars table in my data base.
    For recall
    while i m developing this form this step is well achieved:
    i open the
    WEBUTIL.olb, in  a window so different tabs is displayed and then i drag
    the webutil-object group into my forms object group-node. until I have the
    following items under the object group-node in my form test.fmb
    webutil_error                                               
    -- as alert style: stop
    WEBUTIL_HIDDEN_WINDOW                       
    WEBUTIL_CANVAS
    WEBUTIL                                                    
    -- as a block
    at run time I
    have the following message error which is come out form the function CLIENT_TEXT_IO.FOPEN(file_name,
    'W') and written through a  trigger fired
    on “ when new form instance”. 
    wcu-015: your form must contain the following bean for this function to be
    available : oracle.forms.webutil.file.filefunctions; 
    also i would like to inform that  at run time,
    java console didn't show me any of errors loading java files, which mean
    that all configuration required, to getting webutil work  with oracle 9i form builder,  are well executed.
    Oracle
    JInitiator: Version 1.3.1.9
    Using JRE
    version 1.3.1.22-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and
    Settings\wwProxy Configuration: no proxyJAR cache enabled
    Location: C:\Documents and Settings\ww\Oracle Jar Cache
    Loading:
    http://wissam-773df302:8888/forms90/jars/webutil.jar
    from JAR cacheLoading
    http://wissam-773df302:8888/forms90/jars/jacob.jar from
    JAR cacheLoading
    http://wissam-773df302:8888/forms90/jars/demo90.jar from
    JAR cacheLoading
    http://wissam-773df302:8888/forms90/jars/FormsGraph.jar
    from JAR cacheLoading
    http://wissam-773df302:8888/forms90/jars/icons.jar
    from JAR cacheLoading
    http://wissam-773df302:8888/forms90/jars/frmwebutil.jar
    from JAR cacheLoading
    http://wissam-773df302:8888/forms90/java/f90all_jinit.jar
    from JAR cacheRegister
    WebUtil -
    Loading Webutil Version 1.0.2 BetaproxyHost=nullproxyPort=0connectMode=HTTP,
    native.Forms Applet version is : 90290
    Finally  still i m facing the same problem about the
    error message mentioned earlier; I appreciate any support and I will be very
    thankful for helping me to find  a suitable solution!!

    1.) Please don't double post:Urgent message : oracle9i form builder read  txt file error
    2.) As for your original post: don't post urgent questions over here. If they are really urgent call oracle support. See How To Ask Questions The Smart Way
    and after all:
    wcu-015: your form must contain the following bean for this function to be
    available : oracle.forms.webutil.file.filefunctions; 
    are you certain, 100% positive, and absolutely sure you have a bean item with above implementation class in your form? I'd double check that...
    JInit and IE8? I am not 100% sure, but I am almost certain that this combination didn't work at all. And please don't tell us you used that stupid hack where you replace the jvm.dll of JInit with one of a current JPI installation.
    The Oracle Versions you have in place are rather ancient as well, you really should think about upgrading your database and your forms installation. As you already are on webforms moving to the current version of forms shouldn't require much changes in your forms.
    cheers

  • Enable the security configuration for this panel

    Why do my panels built with Configurator sometimes display
    this in Ps Cs4?
    "Please close all panels or restart Photoshop to enable the
    security configuration for this panel"
    Closing panels or restarting Photoshop does not enable the
    panels but exporting from Configurator does enable them. Why do I
    have to keep exporting?

    I believe I have stumbled on the answer to this problem, so I
    would like to pass it along to any other users who have a similar
    problem.
    My experience is that this is an intermittent problem, so I
    asked myself what do I do from time to time that could be causing
    this difficulty. The answer is I use a program called CC cleaner to
    clean out temporary files (that in theory I don't need). I found
    that after running CC cleaner, I have to re-export the
    configuration file (as I get the error message described in an
    earlier posting) so that the configurator panel subsequently opens
    properly when I open up C S 4.
    I immediately ran CC cleaner again and found that it wanted
    to delete only one group of files that were located in the
    following folder:
    C:\Documents and settings\user's name\application
    data\Macromedia\flash player\*.*
    Accordingly, I instructed " CC cleaner", to exclude this
    folder and everything in it (from deletion):
    Now if I run CC cleaner to get rid of all my temporary
    Internet files and other temporary files, but it leaves the above
    folder untouched, and so far the configurator panel opens up
    properly in Photoshop.
    I don't use Windows "disk cleaner" so I'm not sure whether or
    not this cleaner represents a potential problem. In any event it's
    the Macromedia folder described above that causes the problem.
    It's clear that Adobe configurator uses Macromedia flash to
    do its thing, so hopefully I've solve this problem
    long-term.

  • WC-015 -Your Form must contain the following bean for this funtion..FileFun

    I have done all the configuration for webutil,attached the library webutil.pll,copied olb etc.I want to envoke a file dialog box
    with the following code
    c:= client_get_file_name('c:\',null,'PDF|*.pdf|MS Word (*.doc)|*.doc|MS Word (*.rtf)|*.rtf','Select...');
    Giving error
    WC-015 -Your Form must contain the following bean for this funtion function to be available
    oracle.forms.webutil.file.FileFunctions
    checked all paths,formsweb.cfg,default.env ...
    still not able to find out where the problem is?

    Heres the output of the console..
    Loading http://pc-india12.india.local:8888/forms90/java/f90all_jinit.jar from JAR cache
    connectMode=HTTP, native.
    Forms Applet version is : 90290
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

  • Is it possible to enable the Web Services for eprint on the CP1025nw

    I am using the HP Laserjet CP1025nw
    It is connected to a wired network with a fixed IP address.
    I am using Windows 7 64bit
    When I click enable to complete the Web Services setup - it fails telling me to check the internet connection.
    The internet is working fine and all other aspects of the printer are working so how do I complete this setup??
    Any suggestions please?
    Thanks John
    This question was solved.
    View Solution.

    Hi John,
    I suggest starting over and following the instructions.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • What is the Smartnet service for the 2504 license upgrade LIC-CT2504-UPG ?

    Hi guys,
    Can some one explain me what is this service for ? I have the LIC-CT2504-UPG, with the LIC-CT2504-5A (5 AP licenses adder) and I don't understeand what are the SMARTNet services for this licenses ?
    Are they needed if I already have the SMARTNet service for the hardware controller ?
    Do these services provide something additional on top of the hardware service ?
    Thank you.

    HI,
    Smartnet Service Contract:
    Reduce downtime with fast, expert technical support, flexible hardware coverage, and smart, proactive device diagnostics with SMARTnet Service. Your IT staff has anytime access to Cisco engineers in the Technical Assistance Center (TAC) and an extensive range of resources, tools and training.
    What You Get by having this contract :
    Global 24-hour access to experts in the Cisco Technical Assistance Center (TAC)
    Self-help support through online communities, resources, and tools
    Hardware replacement options, including 2-hour, 4-hour and next business day
    software updates and download from cisco website fro your controller.
    Hope you got the point :)
    Regards
    Dont forget to rate helpful posts

  • Managing the mail service for WebCenter Spaces

    I need to setup the mail service in WebCenter Spaces and could use some assistance. I have a standalone Linux DEV box that has WebCenter 11.1.1.2 installed. I have Documents, Discussions, wikis+blogs all working in this instance.
    Now, I need to configure the mail service for this DEV instance to an SMTP mail server but I don't have any experience with this part. Has anyone setup the mail service using the Linux sendmail or Exchange 2003? How did you setup the external application for the mail server if you want to use Sendmail? Any help is appreciated.

    Hi Everybody
    I am also having similar problems. I could configure everything except for the mail service.
    I have the SMTP port but do not have IMAP details as our IT team does not maintain the IMAP.
    Please let me know how can I configure mail service with the SMTP details only.
    Your timely help would be much appreciated as we are in between a project development.
    regards
    Ramesh Chowdhary
    9717003417

  • The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

    After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 Secure Store Service         
     Secure Store                   g0n6 High     The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
    trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
    operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
    e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
    has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)    
    at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
    at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.86  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        aat87 Monitorable   b3b6e19b-7de2-e016-ad32-0fc975829ef0
    Is it a bug or any issue in configuration?
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    Hello
    something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
    1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
    1>  MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
    2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
    2>  Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
    2>  Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
    2>  Copying all files to temporary location below for package/publish:
    2>  obj\Debug\Package\PackageTmp.
    2>  Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
    2>  Adding sitemanifest (sitemanifest).
    2>  Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding declared parameter 'IIS Web Application Name'.
    2>  Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
    2>  file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
    2>  To get the instructions on how to deploy the web package please visit the following link:
    2>  http://go.microsoft.com/fwlink/?LinkId=124618
    2>  Sample script for deploying this package is generated at the following location:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
    2>  For this sample script, you can change the deploy parameters by changing the following file:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
    2>  Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
    3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    3>Active Deployment Configuration: Deploy App for SharePoint
    3>Uninstall app for SharePoint:
    3>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    3>Install app for SharePoint:
    3>  Uploading the app for SharePoint...
    3>  Creating a trusted root authority in SharePoint for IIS Express.
    3>  Installation is in progress (00:00:00)
    3>  Installation is in progress (00:00:01)
    3>  Installation is in progress (00:00:02)
    3>  Installation is in progress (00:00:03)
    3>  Installation is in progress (00:00:05)
    3>  Installation is in progress (00:00:06)
    3>  App failed to install, cleaning up...
    3>  App installation cleanup failed due to errors.  Please see the app on the SharePoint site’s “Site Contents” page for details.
    3>  App installation encountered the following errors:
    3> 
    3>  @"Error 1
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3> 
    3>  @"Error 2
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    ========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    ========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

  • Unable to connect to the Data Access service for this management server

    Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
    with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
     Install was failing on selecting the management server. Research led me to
    Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
    >setspn -l domain\scom.mgmt
    Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
    MSOMSdkSvc/SCOM-MGMT1
    MSOMSdkSvc/SCOM-MGMT1.domain.net
    MSOMSdkSvc/SCOM-MGMT2
    MSOMSdkSvc/SCOM-MGMT2.domain.net
    >setspn -l domain\scom-mgmt1
    Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/SCOM-MGMT1.domain.net
    TERMSRV/SCOM-MGMT1.domain.net
    WSMAN/SCOM-MGMT1.domain.net
    RestrictedKrbHost/SCOM-MGMT1.domain.net
    HOST/SCOM-MGMT1.domain.net
    MSOMHSvc/SCOM-MGMT1
    TERMSRV/SCOM-MGMT1
    WSMAN/SCOM-MGMT1
    RestrictedKrbHost/SCOM-MGMT1
    HOST/SCOM-MGMT1
    >setspn -l domain\scom-mgmt2
    Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
    MSOMHSvc/ SCOM-MGMT2.domain.net
    MSOMHSvc/ SCOM-MGMT2
    WSMAN/SCOM-MGMT2.domain.net
    WSMAN/SCOM-MGMT2
            TERMSRV/SCOM-MGMT2.domain.net
    TERMSRV/SCOM-MGMT2
    RestrictedKrbHost/SCOM-MGMT2
    HOST/CHH-SCOM-MGMT2
    RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
    HOST/CHH-SCOM-MGMT2.osi-asp.net
    >setspn -l domain\scom-ssrs
    Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
        WSMAN/SCOM-SSRS
    WSMAN/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net
    MSSQLSvc/SCOM-SSRS.domain.net:1433
        TERMSRV/SCOM-SSRS.domain.net
    TERMSRV/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS
      HOST/SCOM-SSRS
    RestrictedKrbHost/SCOM-SSRS.domain.net
    HOST/SCOM-SSRS.domain.net
    When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
    all the same version”.
    OpsMgrSetupWizard.log states…
    Info:     
    :Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long.
    Info:     
    :StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
    managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
    When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
    Bob

    Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
    This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
    /DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
    When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
    Problem signature:
    Problem Event Name:                       
    CLR20r3
    Problem Signature 01:                      
    setupchainerui.exe
    Problem Signature 02:                      
    7.0.5000.0
    Problem Signature 03:                      
    522a5b85
    Problem Signature 04:                      
    mscorlib
    Problem Signature 05:                      
    4.0.0.0
    Problem Signature 06:                      
    53b4fc1e
    Problem Signature 07:                      
    e4d
    Problem Signature 08:                      
    5a
    Problem Signature 09:                      
    System.FormatException
    OS Version:                                         
    6.1.7601.2.1.0.274.10
    Locale ID:                                            
    1033
    Additional Information 1:                 
    4911
    Additional Information 2:                 
    49111a576c61a461b7f2900e4224563c
    Additional Information 3:                 
    a1e6
    Additional Information 4:                 
    a1e62e9c159c1d7601a31ccff83dbf94
    App Event Log:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
    <EventRecordID>4999</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
    Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
    <EventRecordID>5000</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>SetupChainerUI.exe</Data>
    <Data>7.1.10226.0</Data>
    <Data>522a5b85</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.1.7601.18409</Data>
    <Data>5315a05a</Data>
    <Data>e0434352</Data>
    <Data>000000000000940d</Data>
    <Data>a64</Data>
    <Data>01d03bf626a03a7a</Data>
    <Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    </EventData>
    </Event>
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
    <EventRecordID>5001</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SERVER NAME</Computer>
    <Security />
    </System>
    - <EventData>
    <Data />
    <Data>0</Data>
    <Data>CLR20r3</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>setupchainerui.exe</Data>
    <Data>7.0.5000.0</Data>
    <Data>522a5b85</Data>
    <Data>mscorlib</Data>
    <Data>4.0.0.0</Data>
    <Data>53b4fc1e</Data>
    <Data>e4d</Data>
    <Data>5a</Data>
    <Data>System.FormatException</Data>
    <Data />
    <Data />
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
    <Data />
    <Data>0</Data>
    <Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
    <Data>0</Data>
    </EventData>
    </Event>
    OpsMgrSetupWizard.log
    [13:48:16]:          
    Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
    [13:48:16]:          
    Error:     :StackTrace:  
    at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
       at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
       at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
    Any ideas? I feel like I’m just going in circles…Bob

  • I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder.

    I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder. All of my playlists have disappeared and I am trying to recover them however I now can't even open iTunes!

    Hi crazymaiden,
    I have two articles for you here that should be able to help you troubleshoot this issue with your ability to launch iTunes:
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/HT2311
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • In service order Issu:No account assignment found for this service process

    Issue:No account assignment found for this service process
    An error has occurred in the system RT1400LS while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
    While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
    We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
    As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
    Revert require data to understand the issue more.
    Best Regards,
    Prakesh

     Dear Gurus,
    Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
    We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
    If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
    Please help me in this scenario what should we do.
    Best Regards,
    Prakesh.

Maybe you are looking for

  • What does the top level instance name "iop" mean?

    What does the top level instance name "iop" mean?

  • Convert planned orders in contracts

    Hi. When running MRP, It seems that is only possible to create Purchase requisitions, schedule agreement divisions or planned orders. I need that the MRP output goes to a contract. Does anyone know if itu2019s possible to do it directly from MRP run?

  • Why is one of the contacts on iphone in blue font

    Why is one of the contacts on my iphone in blue font with a blue icon man?

  • Approval in Quotation or Sales Order

    We have scenario where SO generates automatically PR. We want to have approval process on the SD side - either at quotation level (the SO is created from quotation) or at SO level, so until the sales document is approved not to generate the PR. How c

  • Supporting both Oracle clients 10 and 11

    Hello, We have to deploy an application to different client computers - each could have Oracle client 10 or 11. We don't want to ask users to change to another Oracle client, but we can ask them to install ODP support for their client. My question is