Issue faced in QA environment after transport

Hi
We have successfully transported the app set from Dev to QA environment. After transporting we are facing the following issue.
EVDRE not working ' throwing WEB server error for the Reports in the QA server. But The same  Reports are working fine in Dev server.
system Performance has come down.
Also successful transport to the QA environment, we have make some changes in the BPF in the Dev environment and then try to transport the same to QA environment. The changes for the BPF is not reflecting in QA. Do I need to transport the Appset once more?
Looking forward to hear from you.
Thanks
Krish
Edited by: Krishnendu Pal on Aug 24, 2011 3:34 AM

Hi Krish,
Please take a look at the SAP Note: 14769898.

Similar Messages

  • Issue with migrated transformation rule after transport

    Hello all,
    We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
    The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
    We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
    SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
    Has anybody faced such issue? We are on Ehp1 SP7.
    - Danny

    Thanks Murali,
    Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
    The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
    Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
    - Danny

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Workflow issue after transport to QA system

    Greetings,
      After transport to QA my workflow does not execute the job I've assigned to my step.
    I have a program assigned as a background job in a step that gets triggered by a typical workflow event.
    I believe this is the first workflow for their system... and it's definately my first as well.
    I can see the workflow executing using the trace.... but my job never runs.
    I'm beginning to suspect I need to refresh the workflow buffer... but perhaps it's an authorization issue
      Please advise...
    Doug -

    Doug:
    First refresh the memory of the workflow to take the new changes ok, transaction SWU_OBUF.
    Just to be sure, check the transaction SWU3 and check if everything is OK.
    The posible authorization problem is for the User WF-BATCH, so check the authorizations for this user.
    Best Regards,
    Jessica

  • Issues in Process chain after Transporting to Q

    Hi All
    I have couple of issues with my process chain (in Q). We have recently upgraded from BW3.5 to BI7.0. After upgrade i have a change made to one of my Process chain. i have transported it successfully to Q system. I have collected all the related objects associated with the change in the transport. But when try to see the changes changes in the process chain in Q system i have the following issues.
    1. i do not see my changes in display mode. But i am able to see all the changes if i go to change mode (this looks weird and i dont know why)
    2. i am unable to schdule the process chain in Q system as i was able to do earlier. Now it is asking for Transport when i try to schedule the process chain. this was not the case earlier.
    3. In the transport i also collected a newly created infopackage and added it to the Process chain. But i do not see any link between the infopackage and the process chain (it was supposed to have a link as it had in DEV), i mean when i go to  infopackage it used to give me a mesage saying the infopackage is already available in Process chain which i got in DEV.
    All the above cases were working per normal in DEV systems tested and were collected as required in the transports and moved to Q
    Please let me know ASAP if any of you have encountered similar problems before and have solutions. i saw couple of related threads (some suggested to directly activate the process chain in Q system by opening the Q systems as an alternate) but could not find a solution
    Any sort of help will be really appreciated
    Thanks
    HK

    1. Display mode shows only the active version of Process chain. When you go into change mode, it displays the inactive version (if any available). Make sure you activate the process chain in the change mode. Then the chain you see in display and change mode will be in sync.
    2. When you try to schedule, the Process chain will be activated as well. If your Q system is prompting for transport then probably the system is open for changes. If you want to modify process chains in Q and P systems, make appropriate Object Changeability settings in Transport connection in Q and P systems and make sure the system is closed for changes (SCC4).
    3. Use Transport connection to collect the objects required for Process chain. After transport, check the transport log and make sure all the objects are imported successfully.
    Regards,
    Sree

  • Issues faced in MDM 7.1 SP07 upgrade from SP05

    Dear Experts,
    We have a requirement to upgrade the SAP MDM 7.1 SP05 to SP07.
    For this Could you all please list out the various issues, which could be faced in doing this upgrade and what could be the Possible Solutions for these issues.
    And if anyone has done the upgrade from SAP MDM 7.1 SP05 to SP07, then Please share you experience for the same related to the issues faced and any other relevan tinformation which could be helpful.
    Thanks in advance for the valuable inputs.
    Regards
    Gaurav Kumar Sharma

    Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
    or refer the link
    http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
    Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
    These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
    Thanks,
    Shambhu.

  • Hierarchy Analysis Authorization does not work after transport

    Hi Gurus,
    I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
    All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
    I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
    Regards,
    Salman

    Salman,
    What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
    Regards,
    Shivraj Singh

  • Test System (BQ1) Objects showing up wrong Source System after Transport.

    Hi Experts,
    We are working on IS-U BI7.0 Project. We have finished with our Development and have transported the DataSources, Transformations and DTPs from Development (BD1) into Test (BQ1) Systems.
    We have entered values in the Conversion of Logical Source Systems correctly.
    When we select the DataSource and Click Object Directory Entry from the Extras Menu, we found that the Original Source System is defined as BQ1 instead of BD1 (Development System), which is where the Object is getting Transported from.
    We have implemented an SAP Note:1008633 (Incorrect Source System after Transport (RSTRAN 514) but couldn't resolve the issue.
    We basically want all the Objects in the BQ1 (Test System) showing the Original Source System as BD1 (Development System) but only the DataSources and it's connected Transformations and DTPs are originating from the BQ1 (Test) System itself (The Transformations when Transported from BD1 to BQ1 are Transported with a different Technical Name which is very strange).
    Had anyone faced similar problem and if so, what was the effective solution implemented.
    Any help in this regard is very much appreciated.
    Thanks in Advance.
    Best Regards,
    Chandu.

    It is resolved by our Basis.
    Thanks,
    Chandu

  • Inconsistent Filter in Integrated Planning - After Transport

    Hello All,
    After transporting all the relevant objects for IP...Aggregation Level, Filters, Planning Functions etc...from Dev to QA System. In the QA system when i check the fiter for consistency. I am getting an error "Variable 4EMAK1IX593GLMYGHHXIZCV8B not in query".
    As such all the objects are transported properly. only issue is in the Filters.
    Anybody faced any such error, please help.
    Thanks and Regards,
    Vikram

    Hello,
    Issue resolved....i searched for the  4EMAK1IX593GLMYGHHXIZCV8B in the table RSZGLOBV -- BEx Variables.
    collected it in a new transport and imported..
    Issue resolved.
    For your information.
    REgards,
    Vikram

  • ALV Title Not Display after transporting the Programme from DeV to Qlty

    Hellow Experts,
    i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
    in Development server report are working fine  but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
    DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
    DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
    DATA: layout    TYPE lvc_s_layo.
    layout-grid_title = 'Daily Material Reports.' .
    DATA: fieldcat  TYPE lvc_t_fcat.
    I m using  ALL METHOD alv_grid->set_table_for_first_display method for display alv .
    Thanks,
    Regards
    Neha.

    Hi neha,
    use the sap/help link to solve your issue,
    [http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
    if not use the below example code ,
    Heading 3 :h3  Set the title of the grid
    Fill the grid_title field of structure lvc_s_layo.
    Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
    DATA:
    ALV control: Layout structure
    gs_layout TYPE lvc_s_layo.
    For example :
    Set grid title
    gs_layout-grid_title = 'Flights'.
    CALL METHOD go_grid->set_table_for_first_display
                EXPORTING
               i_structure_name = 'SFLIGHT'
    is_layout      =gs_layout*
               CHANGING 
              it_outtab   = gi_sflight.
    Regards,
    Saravana.S
    Edited by: saravanasap on Dec 21, 2011 8:13 AM

  • Error after transport of Virtual Cube with Services

    Hi All,
    would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
    A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
    Points would be rewarded appropriately.
    Cheers
    Noor

    Hi Noor,
    Check this link, it may help you.
    Re: Transport issue - Source system does not exist
    Regards,
    Vijay G.

  • DSO Will Not Activate after Transport with rc=8

    Hello,
    I had a requirement to make two Purchasing DSOs (2LIS_02_ITM & 2LIS_02_SCL based) write-optimized. I made my changes in the development environment and transported them to QA. The transport went in with rc=8. All of my changes propogated; the DSOs are now write-optimized; however they are not active, nor are the corresponding transformations and DTPs.
    I tried activating directly in QA and it would not work. I also tried re-importing my transport, as well as creating a new activation transport and sending it to QA. Nothing worked.
    Can anyone help or give me some ideas as to how I can get this activated? Thank you!!!
    Here is some of my error text from the transport log:
    Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s)
    The creation of the export DataSource failed
    Error during the retrieval of the logon data stored in secure storage
    Error during the retrieval of the logon data stored in secure storage
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object
    The creation of the export DataSource failed
    Error during the retrieval of the logon data stored in secure storage
    Error during the retrieval of the logon data stored in secure storage
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object
    Error/warning in dict. activator, detailed log    > Detail
    Index /BIC/AZ_02_ITM00-RDR (field REQUEST is not in the table)
    Index /BIC/AZ_02_ITM00-RDR (field DATAPAKID is not in the table)
    Index /BIC/AZ_02_ITM00-RDR (field RECORD is not in the table)
    Index /BIC/AZ_02_SCL00-RDR (field REQUEST is not in the table)
    Index /BIC/AZ_02_SCL00-RDR (field DATAPAKID is not in the table)
    Index /BIC/AZ_02_SCL00-RDR (field RECORD is not in the table)
    Table /BIC/AZ_02_ITM00 could not be activated
    Table /BIC/AZ_02_SCL00 could not be activated
    Return code..............: 8
    DDIC Object TABL /BIC/ has not been activated
    Error when resetting DataStore Object Z_02_ITM to the active version
    DDIC Object TABL /BIC/ has not been activated

    Well...after reading your post it seems that only Basis team can help you.
    You need to restore connection from RSA1. ( context menu of source system) ..But to restore connection you will be needing Destination's IP Address or hostname, backtround user id /password. More over your system needs to be open ( SCC4) and modifiable ( SE06). All this access normally remains with Basis team.
    You can also go to SM59 -
    > ABAP connection--->Pick up your source system connection--.Check the RFC.
    I think your RFC connection is still pointing to the system where you did copy from. But that may not be the only problem. Even password may be wrong that you will know only after successful check of Destination test.
    So, in a nutshell , constact Basis team,
    Regards
    Anindya

  • Web template with HTML framset not working after transport

    Hi,
    I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
    When looking in transport connection I see the following message:
    "Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
    I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
    Has anybody an idea what could cause this?
    Is there a way to regenerate templates (like RSRT for queries) ?
    Thanks in advance
    Bernd Dümmel
    KODAK Stuttgart
      using ve created a

    Did you upload the video?
    Did you provide the correct path to your HTML object?

  • After Transporting the request RFC Destination is empty in SWCV and BEA

    Hi All,
    we are using SAP NW Mobile 7.1 SP08
    After transporting the SWCV & Backend adapter, in the transported system the RFC Destination is empty
    Please help me to fix this issue.
    Thanks and Regards,
    Joseph Beevin.

    Hi,
    When an SWCV is trnasported to a another system,the backend destination will be empty in the target system.,We need to configure the bakcned destination in the target sytem through the DOE Adimin.
    DOE_ADmin Portal -->Configuration --->Backend Configuration.
    In the backend configuration,select the SWCV for which the destination needs to be configured.Select the parameter "RFC  DESTINATION FOR BACKEND"
    When the SWCV is selected all the active Data Objects will be listed in the table below
    Insert the above parameter to the parameter list(the table below)
    Give the name of the availlable backemnd destination name in the "text value" column of the table for each data object and save it.
    Now the backend destination is configured correctly in the target system.Please try this..
    Regards,
    Muralikrishna T.

  • Alert rules not displaying correctly in the RWB after transporting to QA

    Hi Experts,
    After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
    Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
    Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
    Thanks and regards
    Brendon

    Having the same problem and looking for fix...

Maybe you are looking for