Issue for attachment in mail
hi
can i send a mail to any one without any attachmnet,below code is sending body of message in attachment.,which i don;t want.
pls tell me what to do.
OBJTXT contains the body like
po qty:10
rejected:10
return:10
but through below code,all data of body is going throgh an attachemnet,pls tell me what to do.
DOC_CHNG-OBJ_DESCR = I_TITLE. "TITLE.
if i_text is not initial.
loop at i_text.
OBJTXT = I_TEXT. "BODY.
APPEND OBJTXT.
endloop.
endif.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
Entering names in the distribution list
RECLIST-RECEIVER = abc@mail
RECLIST-REC_TYPE = 'U'.
RECLIST-COM_TYPE = 'INT'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
endif.
I think the Fm is used to send mail with attachement..
U need to use the Fm to send mail without attachemnet...
SO_NEW_DOCUMENT_SEND_API1
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_type = 'RAW'
document_data = doc_chng
TABLES
receivers = reclist
object_content = objcont
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
Similar Messages
-
Container for attachment to Mail?
I use Mail and it's very good except for one thing: there is no container for attachments so they end up on your page mixed up with all thetext.
All the other e-mail programmes have this (although they are crap otherwise)except Entourage but that costs money.
Any ideas on this one.I think they are always inline. You can move them around in the window, so that they are in the appropriate place or at the end. This would make them less mixed up with all the text, but not what you wanted.
-
When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?
gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items -
Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?
Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded? -
Sending doc as attachment in mail for Ois 8 I phone 6+
Hi All
1) I just bought apple phone fist time and facing serious problem for attaching document like word or excel of PDF with the mails. All my work goes with PDF, word and excel with out this I can't work.
2) How to make folder to keep the data sync with Mac and I phone without putting on web, let say i have one folder in document and I need this folder to be sync with my I phone , How can i do this?
3) with above folder how can I mail the docs as required?
any one please help as without above application I hone is of no use to me what ever it expensive may be. I am feared
Regards
Mayank ManuHi All
1) I just bought apple phone fist time and facing serious problem for attaching document like word or excel of PDF with the mails. All my work goes with PDF, word and excel with out this I can't work.
2) How to make folder to keep the data sync with Mac and I phone without putting on web, let say i have one folder in document and I need this folder to be sync with my I phone , How can i do this?
3) with above folder how can I mail the docs as required?
any one please help as without above application I hone is of no use to me what ever it expensive may be. I am feared
Regards
Mayank Manu -
Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now
If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Sending log files for scheduled jobs as attachment through mail
Hi All,
Can any one please help me out to write a pl/sql program to send log files for scheduled jobs as attachment through mail.
Thanks.Why would anyone do that as this code has already been posted here a thousand times, it is all over the Internet, and the only thing you need to do is to search for it?
I agree it would cost you some effort, but you are getting paid for it, and we are not getting paid for delivering it on a golden plate on your doorstep, as you can not be bothered to use online resources.
Sybrand Bakker
Senior Oracle DBA -
Security issues for mail relay.
When setting up a mail relay.
Are there any special considerations regarding passwords for the administrator?
Are there any services that need to be specifically turned off?
Any other issues?
TIA
HansHi,
I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
After this, I did run concurrent program "Security List Maintennce" etc...
Tested Upding profile at user level or responsibility level.
On APPS side fine.
I need the some basic steps on setup of security issues for discoverer side.
1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
Looking for info on these setups.
Thx -
Purchase Order E- Mail Issue for Vendor .
Dear All Gurus,
User is complaining that a perticular Vendor is not getting Purchase Order throught E MAIL , i had simulated the scenario in Test Client and given an Output Type and in medium given as " 5EXTERNAL SEND ", after that i hd saved the P.O , then clicked on Print Preview but a msg appears in task bar as " E-mail address incorrect or non-existent " , Kindly help me what can i do to fix this problem I also want to know that either there is a problem in System which is responsible for sending E-mails or Vendor Email address is not OK ?
Thanx in advance ,
Rgds,
sap11Dear,
Please check: Re: PO E-Mail Out Put Error ( E-mail address incorrect or non-existent )
Regards,
Syed Hussain. -
Smart Forms - Attaching HTML file as an attachment in Mail
Hai,
I have following requirements. I have to send the Payment Advice document output as a HTML format to the vendors.
I am able to get the smartforms output as html file. The output of smartforms i am capturing
call function '/1BCDWB/SF00000170'
exporting
control_parameters = w_control_parameters
output_options = w_output_options
user_settings = 'X'
w_t001 = w_t001
w_reguh = w_reguh
w_regud = w_regud
w_e1idrs1 = w_e1idrs1
importing
job_output_info = w_job_output_info
tables
t_item = t_item
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
w_xmloutput = w_job_output_info-xmloutput.
*-SAP Smart Forms: Result of XSF Transformation
w_htmldata = w_xmloutput-trfresult-content[].
Currently the w_htmldata informations are stored in the form of RAW 1024 characters.
Using the below mentioned FM the attachment information i am passing through
contents_txt = it_message
parameters. The contents_txt support only 255 characters. But the smartforms returns RAW 1024 characters. When the HTML attachment is not showning the content properly and the data displays is misaligned. Kindly give me the suggestion how to overcome this issue !
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ''
sender_address_type = ''
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.” -
Hi all,
I have an issue in sending mail as an excel attachment .
i am getting some records in the excel sheet as single line and some are coming correctly. here is the sample code.
ie. some records coming line by line, but some record for eg the 6th and 7th record is coming in the 6th line only .here is the coding part for that
CONCATENATE ' '
I_SHIP_HEAD-TKNUM
L_DATEB
VD
I_SHIP_HEAD-EXTI1
I_SHIP_HEAD-TPBEZ
I_SHIP_HEAD-SIGNI
I_SHIP_HEAD-EXTI2
L_NETWR
L_DMBTR
I_SHIP_HEAD-TNDR_TRKID
MODE
L_ALLOWED_TWGT
I_INV-VBELN
L_INVDAT
I_INV-VSTEL
I_INV-KUNRG
L_ETADATE
I_INV-SPART
I_INV-MATNR
I_INV-ARKTX
I_INV-MATKL
L_FKIMG
L_WT
L_VOL
L_DIFFVAL
CON_CRET
INTO I_BIN SEPARATED BY CON_TAB.
APPEND I_BIN .
CLEAR I_BIN.
suggest me a solution.
Thanks & Regards
Magesh AnandanHi,
check the following sample program and also its easy to understand.
REPORT zvenkat_mail_xls_attach.
" Data retrieval related declarations
TYPES:
BEGIN OF t_emp_dat,
pernr TYPE pa0001-pernr,
persg TYPE pa0001-persg,
persk TYPE pa0001-persk,
plans TYPE pa0001-plans,
stell TYPE pa0001-stell,
END OF t_emp_dat.
DATA:
w_emp_data TYPE t_emp_dat.
DATA:
i_emp_data TYPE STANDARD TABLE OF t_emp_dat.
" Mail related declarations
"Variables
DATA :
g_sent_to_all TYPE sonv-flag,
g_tab_lines TYPE i.
"Types
TYPES:
t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1.
"Workareas
DATA :
w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers.
"Internal Tables
DATA :
i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers.
"Start-of-selection.
START-OF-SELECTION.
PERFORM get_data.
PERFORM build_xls_data_table.
"End-of-selection.
END-OF-SELECTION.
PERFORM send_mail.
"Form get_data from PA0001
FORM get_data.
SELECT pernr
persg
persk
plans
stell
FROM pa0001
INTO CORRESPONDING FIELDS OF TABLE i_emp_data
UP TO 4 ROWS.
ENDFORM. " get_data
"Form build_xls_data_table
FORM build_xls_data_table.
"If you have Unicode check active in program attributes then
"you will need to declare constants as follows.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:
con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
CONCATENATE 'PERNR' 'PERSG' 'PERSK' 'PLANS' 'STELL'
INTO w_attachment
SEPARATED BY con_tab.
CONCATENATE con_cret
w_attachment
INTO w_attachment.
APPEND w_attachment TO i_attachment.
CLEAR w_attachment.
LOOP AT i_emp_data INTO w_emp_data.
CONCATENATE w_emp_data-pernr
w_emp_data-persg
w_emp_data-persk
w_emp_data-plans
w_emp_data-stell
INTO w_attachment
SEPARATED BY con_tab.
CONCATENATE con_cret w_attachment
INTO w_attachment.
APPEND w_attachment TO i_attachment.
CLEAR w_attachment.
ENDLOOP.
ENDFORM. "build_xls_data_table
"Form send_mail
"PACKING LIST
"This table requires information about how the data in the
"tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are to
"be distributed to the documents and its attachments.The first
"row is for the document, the following rows are each for one
"attachment.
FORM send_mail .
"Subject of the mail.
w_document_data-obj_name = 'MAIL_TO_HEAD'.
w_document_data-obj_descr = 'Regarding Mail Program by SAP ABAP'.
"Body of the mail
PERFORM build_body_of_mail
USING:space,
'Hi,',
'I am fine. How are you? How are you doing ? ',
'This program has been created to send simple mail',
'with Subject,Body with Address of the sender. ',
'Regards,',
'Venkat.O,',
'SAP HR Technical Consultant.'.
"Write Packing List for Body
DESCRIBE TABLE i_body_msg LINES g_tab_lines.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
w_packing_list-body_num = g_tab_lines.
w_packing_list-doc_type = 'RAW'.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Write Packing List for Attachment
w_packing_list-transf_bin = 'X'.
w_packing_list-head_start = 1.
w_packing_list-head_num = 1.
w_packing_list-body_start = 1.
DESCRIBE TABLE i_attachment LINES w_packing_list-body_num.
w_packing_list-doc_type = 'XLS'.
w_packing_list-obj_descr = 'Excell Attachment'.
w_packing_list-obj_name = 'XLS_ATTACHMENT'.
w_packing_list-doc_size = w_packing_list-body_num * 255.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Fill the document data and get size of attachment
w_document_data-obj_langu = sy-langu.
READ TABLE i_attachment INTO w_attachment INDEX g_tab_lines.
w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN(
w_attachment ).
"Receivers List.
w_receivers-rec_type = 'U'. "Internet address
w_receivers-receiver = '[email protected]'.
w_receivers-com_type = 'INT'.
w_receivers-notif_del = 'X'.
w_receivers-notif_ndel = 'X'.
APPEND w_receivers TO i_receivers .
CLEAR:w_receivers.
"Function module to send mail to Recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_to_all
TABLES
packing_list = i_packing_list
contents_bin = i_attachment
contents_txt = i_body_msg
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0 .
MESSAGE i303(me) WITH 'Mail has been Successfully Sent.'.
ELSE.
WAIT UP TO 2 SECONDS.
"This program starts the SAPconnect send process.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDFORM. " send_mail
" Form build_body_of_mail
FORM build_body_of_mail USING l_message.
w_body_msg = l_message.
APPEND w_body_msg TO i_body_msg.
CLEAR w_body_msg.
ENDFORM. " build_body_of_mail
I hope that it helps you something.
Regards,
Venkat.O -
PDF attached in Mail changes suffix
This is a really strange problem. When sending PDF files attached per Mail, the suffix will be automatically changed from .pdf into .pdf0, .pdff and so on. It happens randomly. What can be done here, has someone observed the same issue in his Mails?!
I have not experienced the problem, but others have. It appears to relate to special characters (such as umlauts) that are used in the filename - combined with a mail format that is text only.
This post is helpful: http://discussions.apple.com/message.jspa?messageID=7358148#7358148
Solutions thus appear to be:
1) Avoid special characters in filenames (not practical in some languages), or
2) Use HTML elements in every email (the preference alone is not enough), or
3) Use a program other than Mail for sending emails.
Cheers,
Rodney -
My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.
I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike -
Cannot open Word document attachment in mail before sending.
Cannot open Word document attachment in mail before sending.
In Snow Leopard Mail 4, (Version 4.0 (1075/1075.2)) if I attach a word document to a message and, BEFORE sending the message, I double click the attached document to open it, to make sure it is the right one, I get the error "Mail was unable to save the attachment “Test.doc” to disk. Verify that your downloads folder exists and is writable."
The attachment is mailed correctly and arrives at the destination, but the ability to verify an attached document before sending it is essential. This has worked fine in all previous editions of OS X.
Any ideas?
Thanks - LawrenceI have same problem. I've done the following testing to pinpoint where the problem lies and there are clues (see below):
1. My machine had SnowLeopard installed "fresh" (i.e. disk reformat and installed cleanly)
2. I have a comparison machine running Leopard (10.5.6) - essentially a mirror but with different OS
3. Problem is triggered when creating new email, with a MS Word .doc attachment added. If you attempt to open the attached file in the mail (not yet sent) it produces the error message "unable to save file XXX.doc to disk. Verify that your downloads folder exists and is writeable"
4.However, once the mail is sent, the recipient can open the attachment without problems.
5. I have run Disk Utility and all permissions are correct. My downloads folder exists.
6. The problem is not present in Leopard (mirror machine other than OS)
7. I have uninstalled and reinstalled MS Office. Problem still present
8. I have deleted and recreated the preference files for both MS Office and for Mail. Problem still present.
And finally...
9.The problem is confined to .doc files.It works fine for .pdf, .ods AND even for Microsoft .xls files.
So it may be a MS Word problem triggered by Snow Leopard?
Apple: if you can confirm this is a Microsoft problem it may be able to be reported to them as a compatibility issue?
Hope this helps. -
Issue with spamassassin, now mail not working
Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
FF is the maincf. and amavis.conf
All help are greatly appreciated.
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root#
_______________________Amavisd.cof_________________________
use strict;
# Configuration file for amavisd-new
# This software is licensed under the GNU General Public License (GPL).
# See comments at the start of amavisd-new for the whole license text.
#Sections:
# Section I - Essential daemon and MTA settings
# Section II - MTA specific
# Section III - Logging
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# Section VI - Resource limits
# Section VII - External programs, virus scanners, SpamAssassin
# Section VIII - Debugging
#GENERAL NOTES:
# This file is a normal Perl code, interpreted by Perl itself.
# - make sure this file (or directory where it resides) is NOT WRITABLE
# by mere mortals, otherwise it represents a severe security risk!
# - for values which are interpreted as booleans, it is recommended
# to use 1 for true, and 0 or undef or '' for false.
# THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
# now it means true, like any nonempty string does!
# - Perl syntax applies. Most notably: strings in "" may include variables
# (which start with $ or @); to include characters @ and $ in double
# quoted strings, precede them by a backslash; in single-quoted strings
# the $ and @ lose their special meaning, so it is usually easier to use
# single quoted strings. Still, in both cases a backslash need to be doubled
# - variables with names starting with a '@' are lists, the values assigned
# to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
# note the comma-separation and parenthesis. If strings in the list
# do not contain spaces nor variables, a Perl operator qw() may be used
# as a shorthand to split its argument on whitespace and produce a list
# of strings, e.g. qw( one@foo example.com three ); Note that the argument
# to qw is quoted implicitly and no variable interpretation is done within
# (no '$' variable evaluations). The #-initiated comments can not be used
# within the string. In other words, $ and # lose their special meaning
# withing a qw argument, just like within '...' strings.
# - all e-mail addresses in this file and as used internally by the daemon
# are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
# Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
# and not <"@example.com>; also: '' and not ''.
# Section I - Essential daemon and MTA settings
# $MYHOME serves as a quick default for some other configuration settings.
# More refined control is available with each individual setting further down.
# $MYHOME is not used directly by the program. No trailing slash!
#$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
# : $mydomain serves as a quick default for some other configuration settings.
# : More refined control is available with each individual setting further down.
# : $mydomain is never used directly by the program.
$mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
# Set the user and group to which the daemon will change if started as root
# (otherwise just keep the UID unchanged, and these settings have no effect):
$daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
$daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
# Runtime working directory (cwd), and a place where
# temporary directories for unpacking mail are created.
# (no trailing slash, may be a scratch file system)
$TEMPBASE = $MYHOME; # (must be set if other config vars use is)
#$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
# $helpers_home sets environment variable HOME, and is passed as option
# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
# on a normal persistent file system, not a scratch or temporary file system
#$helpers_home = $MYHOME; # (defaults to $MYHOME)
#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
#$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
#$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
# set environment variables if you want (no defaults):
$ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
# both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
# (set host and port number as required; host can be specified
# as IP address or DNS name (A or CNAME, but MX is ignored)
#$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
#$notify_method = $forward_method; # where to submit notifications
# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
# uncomment the approprate settings below if using other setups!
# SENDMAIL MILTER, using amavis-milter.c helper program:
#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
# milter; option -odd is needed to avoid deadlocks
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
# just a thought: can we use use -Am instead of -odd ?
# SENDMAIL (old non-milter setup, as relay):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# prefer to collect mail for forwarding as BSMTP files?
#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
#$notify_method = $forward_method;
# Net::Server pre-forking settings
# You may want $max_servers to match the width of your MTA pipe
# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
$max_servers = 2; # number of pre-forked children (default 2)
$max_requests = 10; # retire a child after that many accepts (default 10)
$child_timeout=5*60; # abort child if it does not complete each task in n sec
# (default: 8*60 seconds)
# Check also the settings of @av_scanners at the end if you want to use
# virus scanners. If not, you may want to delete the whole long assignment
# to the variable @av_scanners, which will also remove the virus checking
# code (e.g. if you only want to do spam scanning).
# Here is a QUICK WAY to completely DISABLE some sections of code
# that WE DO NOT WANT (it won't even be compiled-in).
# For more refined controls leave the following two lines commented out,
# and see further down what these two lookup lists really mean.
#@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
#@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
# Any setting can be changed with a new assignment, so make sure
# you do not unintentionally override these settings further down!
# Lookup list of local domains (see README.lookups for syntax details)
# NOTE:
# For backwards compatibility the variable names @local_domains (old) and
# @local_domains_acl (new) are synonyms. For consistency with other lookups
# the name @local_domains_acl is now preferred. It also makes it more
# obviously distinct from the new %local_domains hash lookup table.
# local_domains* lookup tables are used in deciding whether a recipient
# is local or not, or in other words, if the message is outgoing or not.
# This affects inserting spam-related headers for local recipients,
# limiting recipient virus notifications (if enabled) to local recipients,
# in deciding if address extension may be appended, and in SQL lookups
# for non-fqdn addresses. Set it up correctly if you need features
# that rely on this setting (or just leave empty otherwise).
# With Postfix (2.0) a quick reminder on what local domains normally are:
# a union of domains spacified in: $mydestination, $virtual_alias_domains,
# $virtual_mailbox_domains, and $relay_domains.
@local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# @local_domains_acl = qw(); # default is empty, no recipient treated as local
# @local_domains_acl = qw( .example.com );
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
# @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
# or alternatively(A), using a Perl hash lookup table, which may be assigned
# directly, or read from a file, one domain per line; comments and empty lines
# are ignored, a dot before a domain name implies its subdomains:
#read_hash(\%local_domains, '/var/amavis/local_domains');
#or alternatively(B), using a list of regular expressions:
# $local_domains_re = new_RE( qr'[@.]example\.com$'i );
# see README.lookups for syntax and semantics
# Section II - MTA specific (defaults should be ok)
# if $relayhost_is_client is true, IP address in $notify_method and
# $forward_method is dynamically overridden with SMTP client peer address
# if available, which makes possible for several hosts to share one daemon
#$relayhost_is_client = 1; # (defaults to false)
#$insert_received_line = 1; # behave like MTA: insert 'Received:' header
# (does not apply to sendmail/milter)
# (default is true)
# AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
# (used with amavis helper clients like amavis-milter.c and amavis.c,
# NOT needed for Postfix and Exim)
$unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
#$unix_socketname = undef; # disable listening on a unix socket
# (default is undef, i.e. disabled)
# (usual setting is $MYHOME/amavisd.sock)
# Do we receive quoted or raw addresses from the helper program?
# (does not apply to SMTP; defaults to true)
#$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
#$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
$inet_socket_port = 10024; # accept SMTP on this local TCP port
# (default is undef, i.e. disabled)
# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
# SMTP SERVER (INPUT) access control
# - do not allow free access to the amavisd SMTP port !!!
# when MTA is at the same host, use the following (one or the other or both):
#$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
# (default is '127.0.0.1')
@inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
# (default is qw( 127.0.0.1 ) )
# when MTA (one or more) is on a different host, use the following:
#@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
#$inet_socket_bind = undef; # bind to all IP interfaces
# Example1:
# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
# permit only SMTP access from loopback and rfc1918 private address space
# Example2:
# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
# 127.0.0.1 10/8 172.16/12 192.168/16 );
# matches loopback and rfc1918 private address space except host 192.168.1.12
# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
# Example3:
# @inet_acl = qw( 127/8
# !172.16.3.0 !172.16.3.127 172.16.3.0/25
# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
# matches loopback and both halves of the 172.16.3/24 C-class,
# split into two subnets, except all four broadcast addresses
# for these subnets
# See README.lookups for details on specifying access control lists.
# Section III - Logging
# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
$DO_SYSLOG = 0; # (defaults to false)
#$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
# Log file (if not using syslog)
$LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
#NOTE: levels are not strictly observed and are somewhat arbitrary
# 0: startup/exit/failure messages, viruses detected
# 1: args passed from client, some more interesting messages
# 2: virus scanner output, timing
# 3: server, client
# 4: decompose parts
# 5: more debug details
$log_level = 4; # (defaults to 0)
# Customizeable template for the most interesting log file entry (e.g. with
# $log_level=0) (take care to properly quote Perl special characters like '\')
# For a list of available macros see README.customize .
# only log infected messages (useful with log level 0):
# $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
# [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
# |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
# log both infected and noninfected messages (default):
$log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
<%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Select notifications text encoding when Unicode-aware Perl is converting
# text from internal character representation to external encoding (charset
# in MIME terminology)
# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
#$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# to be used in notification body text: its encoding and Content-type.charset
#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# Default template texts for notifications may be overruled by directly
# assigning new text to template variables, or by reading template text
# from files. A second argument may be specified in a call to read_text(),
# specifying character encoding layer to be used when reading from the
# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
# Text will be converted to internal character representation by Perl 5.8.0
# or later; second argument is ignored otherwise. See PerlIO::encoding,
# Encode::PerlIO and perluniintro man pages.
# $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
# $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
# $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
# $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
# $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
# $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
# If notification template files are collectively available in some directory,
# use read_l10n_templates which calls read_text for each known template.
# read_l10n_templates('/etc/amavis/en_US');
# Here is an overall picture (sequence of events) of how pieces fit together
# (only virus controls are shown, spam controls work the same way):
# bypass_virus_checks set for all recipients? ==> PASS
# no viruses? ==> PASS
# log virus if $log_templ is nonempty
# quarantine if $virus_quarantine_to is nonempty
# notify admin if $virus_admin (lookup) nonempty
# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
# add address extensions for local recipients (when enabled)
# send (non-)delivery notifications
# to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
# virus_lovers or final_destiny==D_PASS ==> PASS
# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
# Equivalent flow diagram applies for spam checks.
# If a virus is detected, spam checking is skipped entirely.
# The following symbolic constants can be used in *destiny settings:
# D_PASS mail will pass to recipients, regardless of bad contents;
# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
# notified. Effectively we lose mail (but will be quarantined
# unless disabled). Not a decent thing to do for a mailer.
# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
# notification (bounce) will be sent to the sender by amavisd-new;
# Exception: bounce (DSN) will not be sent if a virus name matches
# $viruses_that_fake_sender_re, or to messages from mailing lists
# (Precedence: bulk|list|junk);
# D_REJECT mail will not be delivered to its recipients, sender should
# preferably get a reject, e.g. SMTP permanent reject response
# (e.g. with milter), or non-delivery notification from MTA
# (e.g. Postfix). If this is not possible (e.g. different recipients
# have different tolerances to bad mail contents and not using LMTP)
# amavisd-new sends a bounce by itself (same as D_BOUNCE).
# Notes:
# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
# for informing the sender about non-delivery, and how informative
# the notification can be (amavisd-new knows more than MTA);
# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
# notification, colloquially called 'bounce') - depending on MTA;
# Best suited for sendmail milter, especially for spam.
# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
# reason for mail non-delivery, but unable to reject the original
# SMTP session). Best suited to reporting viruses, and for Postfix
# and other dual-MTA setups, which can't reject original client SMTP
# session, as the mail has already been enqueued.
$final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_spam_destiny = D_PASS; # (defaults to D_REJECT)
$final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
# Alternatives to consider for spam:
# - use D_PASS if clients will do filtering based on inserted mail headers;
# - use D_DISCARD, if kill_level is set safely high;
# - use D_BOUNCE instead of D_REJECT if not using milter;
# There are no sensible alternatives to D_BOUNCE for viruses, but consider:
# - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
# - use D_REJECT instead of D_BOUNCE if using milter and under heavy
# virus storm;
# Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
# to D_BOUNCE.
# The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
# and D_PASS made settings $warnvirussender and $warnspamsender only still
# useful with D_PASS.
# The following $warn*sender settings are ONLY used when mail is
# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
# Bounces or rejects produce non-delivery status notification anyway.
# Notify virus sender?
#$warnvirussender = 1; # (defaults to false (undef))
# Notify spam sender?
#$warnspamsender = 1; # (defaults to false (undef))
# Notify sender of banned files?
#$warnbannedsender = 1; # (defaults to false (undef))
# Notify sender of syntactically invalid header containing non-ASCII characters?
#$warnbadhsender = 1; # (defaults to false (undef))
# Notify virus (or banned files) RECIPIENT?
# (not very useful, but some policies demand it)
#$warnvirusrecip = 1; # (defaults to false (undef))
#$warnbannedrecip = 1; # (defaults to false (undef))
# Notify also non-local virus/banned recipients if $warn*recip is true?
# (including those not matching local_domains*)
#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
# Treat envelope sender address as unreliable and don't send sender
# notification / bounces if name(s) of detected virus(es) match the list.
# Note that virus names are supplied by external virus scanner(s) and are
# not standardized, so virus names may need to be adjusted.
# See README.lookups for syntax.
$viruses_that_fake_sender_re = new_RE(
qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
# - the administrator address may be a simple fixed e-mail address (a scalar),
# or may depend on the SENDER address (e.g. its domain), in which case
# a ref to a hash table can be specified (specify lower-cased keys,
# dot is a catchall, see README.lookups).
# Empty or undef lookup disables virus admin notifications.
$virus_admin = '[email protected]';
# $virus_admin = undef; # do not send virus admin notifications (default)
# $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
# $virus_admin = '[email protected]';
# equivalent to $virus_admin, but for spam admin notifications:
#$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
# $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
#advanced example, using a hash lookup table:
# - $virus_admin = {
# '[email protected]' => '[email protected]',
# '.sub1.example.com' => '[email protected]',
# '.sub2.example.com' => '', # don't send admin notifications
# 'a.sub3.example.com' => '[email protected]',
# '.sub3.example.com' => '[email protected]',
# '.example.com' => '[email protected]', # catchall for our virus senders
# '.' => '[email protected]', # catchall for the rest
# whom notification reports are sent from (ENVELOPE SENDER);
# may be a null reverse path, or a fully qualified address:
# (admin and recip sender addresses default to $mailfrom
# for compatibility, which in turn defaults to undef (empty) )
# If using strings in double quotes, don't forget to quote @, i.e. \@
$mailfrom_notify_admin = "virusalert\@$mydomain";
$mailfrom_notify_recip = "virusalert\@$mydomain";
$mailfrom_notify_spamadmin = "spam.police\@$mydomain";
# 'From' HEADER FIELD for sender and admin notifications.
# This should be a replyable address, see rfc1894. Not to be confused
# with $mailfrom_notify_sender, which is the envelope address and
# should be empty (null reverse path) according to rfc2821.
# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
# $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
# (defaults to: "amavisd-new <postmaster\@$myhostname>")
# $hdrfrom_notify_admin = $mailfrom_notify_admin;
# (defaults to: $mailfrom_notify_admin)
# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
# (defaults to: $mailfrom_notify_spamadmin)
# whom quarantined messages appear to be sent from (envelope sender)
$mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
# (default is undef)
# Location to put infected mail into: (applies to 'local:' quarantine method)
# empty for not quarantining, may be a file (mailbox),
# or a directory (no trailing slash)
# (the default value is undef, meaning no quarantine)
$QUARANTINEDIR = '/var/virusmails';
#$virus_quarantine_method = "local:virus-%i-%n"; # default
#$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
#use the new 'bsmtp:' method as an alternative to the default 'local:'
#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
# When using the 'local:' quarantine method (default), the following applies:
# A finer control of quarantining is available through variable
# $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
# or a ref to a hash lookup table, or a regexp lookup table object,
# which makes possible to set up per-recipient quarantine addresses.
# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
# per-recipient lookup result from the hash table %$virus_quarantine_to)
# is/are interpreted as follows:
# VARIANT 1:
# empty or undef disables quarantine;
# VARIANT 2:
# a string NOT containg an '@';
# amavisd will behave as a local delivery agent (LDA) and will quarantine
# viruses to local files according to hash %local_delivery_aliases (pseudo
# aliases map) - see subroutine mail_to_local_mailbox() for details.
# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
# * if $QUARANTINEDIR is a directory, each quarantined virus will go
# to a separate file in the $QUARANTINEDIR directory (traditional
# amavis style, similar to maildir mailbox format);
# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
# mailbox. All quarantined messages will be appended to this file.
# Amavisd child process must obtain an exclusive lock on the file during
# delivery, so this may be less efficient than using individual files
# or forwarding to MTA, and it may not work across NFS or other non-local
# file systems (but may be handy for pickup of quarantined files via IMAP
# for example);
# VARIANT 3:
# any email address (must contain '@').
# The e-mail messages to be quarantined will be handed to MTA
# for delivery to the specified address. If a recipient address local to MTA
# is desired, you may leave the domain part empty, e.g. 'infected@', but the
# '@' character must nevertheless be included to distinguish it from variant 2.
# This method enables more refined delivery control made available by MTA
# (e.g. its aliases file, other local delivery agents, dealing with
# privileges and file locking when delivering to user's mailbox, nonlocal
# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
# will not be handed back to amavisd for checking, as this will cause a loop
# (hopefully broken at some stage)! If this can be assured, notifications
# will benefit too from not being unecessarily virus-scanned.
# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
# setup, but probably not safe with sendmail milter interface without
# precaution.
# (the default value is undef, meaning no quarantine)
#$virus_quarantine_to = '[email protected]'; # traditional local quarantine
#$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
#$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
#$virus_quarantine_to = '[email protected]'; # similar
#$virus_quarantine_to = undef; # no quarantine
#$virus_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^user@example\.com$'i => 'infected@'],
# [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
# [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
# [qr/.*/ => 'virus-quarantine'] );
# similar for spam
# (the default value is undef, meaning no quarantine)
#$spam_quarantine_to = '[email protected]';
#$spam_quarantine_to = "spam-quarantine\@$mydomain";
#$spam_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
# [qr/.*/ => 'spam-quarantine'] );
# In addition to per-recip quarantine, a by-sender lookup is possible. It is
# similar to $spam_quarantine_to, but the lookup key is the sender address:
#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
# Add X-Virus-Scanned header field to mail?
$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
# Leave empty to add no header field # (default: undef)
$X_HEADER_LINE = "by amavisd-new at $mydomain";
$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
#$remove_existing_x_scanned_headers= 1; # remove existing headers
# (defaults to false)
$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
#$remove_existing_spam_headers = 1; # remove existing spam headers if
# spam scanning is enabled (default)
# set $bypass_decode_parts to true if you only do spam scanning, or if you
# have a good virus scanner that can deal with compression and recursively
# unpacking archives by itself, and save amavisd the trouble.
# Disabling decoding also causes banned_files checking to only see
# MIME names and MIME content types, not the content classification types
# as provided by the file(1) utility.
# It is a double-edged sword, make sure you know what you are doing!
#$bypass_decode_parts = 1; # (defaults to false)
# don't trust this file type or corresponding unpacker for this file type,
# keep both the original and the unpacked file
# (lookup key is what file(1) utility returned):
$keep_decoded_original_re = new_RE(
qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
# Checking for banned MIME types and names. If any mail part matches,
# the whole mail is rejected, much like the way viruses are handled.
# A list in object $banned_filename_re can be defined to provide a list
# of Perl regular expressions to be matched against each part's:
# * Content-Type value (both declared and effective mime-type),
# including the possible security risk content types
# message/partial and message/external-body, as specified by rfc2046;
# * declared (recommended) file names as specified by MIME subfields
# Content-Disposition.filename and Content-Type.name, both in their
# raw (encoded) form and in rfc2047-decoded form if applicable;
# * file content type as guessed by 'file(1)' utility, both the raw result
# from file(1), as well as short type name, classified into names such as
# .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
# beginning with a dot - see subroutine determine_file_types().
# This step is done only if $bypass_decode_parts is not true.
# * leave $banned_filename_re undefined to disable these checks
# (giving an empty list to new_RE() will also always return false)
$banned_filename_re = new_RE(
qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
# qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
# qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
# jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
# vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
# qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
# qr'^application/x-msdownload$'i, # banned MIME types
# qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
# and http://www.cknow.com/vtutor/vtextensions.htm
# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
# as well as any file name which happens to end with .exe. If only matching
# a file name is desired, but not the short name, a pattern qr'.\.exe$'i
# or similar may be used, which requires that at least one character preceeds
# the '.exe', and so it will never match short file types, which always start
# with a dot.
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
# (these should be considered policy options, they do not disable checks,
# see bypas*checks for that!)
# Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
# envelope e-mail address (or domain only) to the hash %virus_lovers, or to
# the access list @virus_lovers_acl - see README.lookups and examples.
# Make sure the appropriate form (e.g. external/internal) of address
# is used in case of virtual domains, or when mapping external to internal
# addresses, etc. - this is MTA-specific.
# Notifications would still be generated however (see the overall
# picture above), and infected mail (if passed) gets additional header:
# X-AMaViS-Alert: INFECTED, message contains virus: ...
# (header not inserted with milter interface!)
# NOTE (milter interface only): in case of multiple recipients,
# it is only possible to drop or accept the message in its entirety - for all
# recipients. If all of them are virus lovers, we'll accept mail, but if
# at least one recipient is not a virus lover, we'll discard the message.
# %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
# lookup tables:
# (this is mainly a time-saving option, unlike virus_lovers* !)
# Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
# access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
# are used to skip entirely the decoding, unpacking and virus checking,
# but only if ALL recipients match the lookup.
# %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
# do NOT GUARANTEE the message will NOT be checked for viruses - this may
# still happen when there is more than one recipient for a message, and
# not all of them match these lookup tables. To guarantee virus delivery,
# a recipient must also match %virus_lovers/@virus_lovers_acl lookups
# (but see milter limitations above),
# NOTE: it would not be clever to base virus checks on SENDER address,
# since there are no guarantees that it is genuine. Many viruses
# and spam messages fake sender address. To achieve selective filtering
# based on the source of the mail (e.g. IP address, MTA port number, ...),
# use mechanisms provided by MTA if available.
# Similar to lookup tables controlling virus checking, there exist
# spam scanning, banned names/types, and headers_checks control counterparts:
# %spam_lovers, @spam_lovers_acl, $spam_lovers_re
# %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
# %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
# and:
# %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
# %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
# %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
# See README.lookups for details about the syntax.
# The following example disables spam checking altogether,
# since it matches any recipient e-mail address (any address
# is a subdomain of the top-level root DNS domain):
# @bypass_spam_checks_acl = qw( . );
# @bypass_header_checks_acl = qw( [email protected] );
# @bad_header_lovers_acl = qw( [email protected] );
# See README.lookups for further detail, and examples below.
# $virus_lovers{lc("postmaster\@$mydomain")} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
# $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
# $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
# $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
#or:
# @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
# $bypass_virus_checks{lc('[email protected]')} = 1;
# @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
# @virus_lovers_acl = qw( [email protected] );
# $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
# $spam_lovers{lc("postmaster\@$mydomain")} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# @spam_lovers_acl = qw( !.example.com );
# $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
# don't run spam check for these RECIPIENT domains:
# @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
# or the other way around (bypass check for all BUT these):
# @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
# a practical application: don't check outgoing mail for spam:
# @bypass_spam_checks_acl = ( "!.$mydomain", "." );
# (a downside of which is that such mail will not count as ham in SA bayes db)
# Where to find SQL server(s) and database to support SQL lookups?
# A list of triples: (dsn,user,passw). (dsn = data source name)
# Specify more than one for multiple (backup) SQL servers.
# See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
# @lookup_sql_dsn =
# ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
# ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
# ('mail' in the example is the database name, choose what you like)
# With PostgreSQL the dsn (first element of the triple) may look like:
# 'DBI:Pg:host=host1;dbname=mail'
# The SQL select clause to fetch per-recipient policy settings.
# The %k will be replaced by a comma-separated list of query addresses
# (e.g. full address, domain only, catchall). Use ORDER, if there
# is a chance that multiple records will match - the first match wins.
# If field names are not unique (e.g. 'id'), the later field overwrites the
# earlier in a hash returned by lookup, which is why we use '*,users.id'.
# No need to uncomment the following assignment if the default is ok.
# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
# ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
# ' ORDER BY users.priority DESC';
# The SQL select clause to check sender in per-recipient whitelist/blacklist
# The first SELECT argument '?' will be users.id from recipient SQL lookup,
# the %k will be sender addresses (e.g. full address, domain only, catchall).
# The default value is:
# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
# ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
# ' ORDER BY mailaddr.priority DESC';
# To disable SQL white/black list, set to undef (otherwise comment-out
# the following statement, leaving it at the default value):
$sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
# If you decide to pass viruses (or spam) to certain recipients using the
# above lookup tables or using $final_virus_destiny=1, you can set
# the variable $addr_extension_virus ($addr_extension_spam) to some
# string, and the recipient address will have this string appended
# as an address extension to the local-part of the address. This extension
# can be used by final local delivery agent to place such mail in different
# folders. Leave these two variables undefined or empty strings to prevent
# appending address extensions. Setting has no effect on recipient which will
# not be receiving viruses/spam. Recipients who do not match lookup tables
# local_domains* are not affected.
# LDAs usually default to stripping away address extension if no special
# handling is specified, so having this option enabled normally does no harm,
# provided the $recipients_delimiter matches the setting on the final
# MTA's LDA.
# $addr_extension_virus = 'virus'; # (default is undef, same as empty)
# $addr_extension_spam = 'spam'; # (default is undef, same as empty)
# $addr_extension_banned = 'banned'; # (default is undef, same as empty)
# Delimiter between local part of the recipient address and address extension
# (which can optionally be added, see variables $addr_extension_virus and
# $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
# to <[email protected]>.
# Delimiter should match equivalent (final) MTA delimiter setting.
# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
# Setting it to an empty string or to undef disables this feature
# regardless of $addr_extension_virus and $addr_extension_spam settings.
$recipient_delimiter = '+'; # (default is '+')
# true: replace extension; false: append extension
# $replace_existing_extension = 1; # (default is false)
# Affects matching of localpart of e-mail addresses (left of '@')
# in lookups: true = case sensitive, false = case insensitive
$localpart_is_case_sensitive = 0; # (default is false)
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
# senders even if the message is recognized as spam. Effectively, for the
# specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
# further processing being the same as otherwise specified for spam lovers.
# It does not turn off inserting spam-related headers, if they are enabled.
# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
# Effectively, for messages from blacklisted senders, spam level
# is artificially pushed high, and the normal spam processing applies,
# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
# reactions to spam, including possible rejection. If the message nevertheless
# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
# in the 'X-Spam-Status' header field, but the reported spam value and
# set of tests in this report header field (if available from SpamAssassin,
# which may have not been called) is not adjusted.
# A sender may be both white- and blacklisted at the same time,
# settings are independent. For example, being both white- and blacklisted,
# message is delivered to recipients, but is tagged as spam.
# If ALL recipients of the message either white- or blacklist the sender,
# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
# The following variables (lookup tables) are available, with the semantics
# and syntax as specified in README.lookups:
# %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
# %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
# SOME EXAMPLES:
#ACL:
# @whitelist_sender_acl = qw( .example.com );
# @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# NOTE: This is not a reliable way of turning off spam checks for
# locally-originating mail, as sender address can easily be faked.
# To reliably avoid spam-scanning outgoing mail,
# use @bypass_spam_checks_acl .
#RE:
# $whitelist_sender_re = new_RE(
# qr'^postmaster@.*\bexample\.com$'i,
# qr'^owner-[^@]*@'i, qr'-request@'i,
# qr'\.example\.com$'i );
$blacklist_sender_re = new_RE(
qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
#HASH lookup variant:
# NOTE: Perl operator qw splits its argument string by whitespace
# and produces a list. This means that addresses can not contain
# whitespace, and there is no provision for comments within the string.
# You can use the normal Perl list syntax if you have special requirements,
# e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
# addresses from a file.
# a hash lookup table can be read from a file,
# one address per line, comments and empty lines are permitted:
# read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
# ... or set directly:
# $whitelist_sender{''} = 1; # don't spam-check MTA bounces
map { $whitelist_sender{lc($_)}=1 } (qw(
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
returns.groups.yahoo.com
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
# The same semantics as for global white/blacklisting applies, but this
# time each recipient (or its domain, or subdomain, ...) can be given
# an individual lookup table for matching senders. The per-recipient lookups
# override the global lookups, which serve as a fallback default.
# Specify a two-level lookup table: the key for the outer table is recipient,
# and the result should be an inner lookup table (hash or ACL or RE),
# where the key used will be the sender.
#$per_recip_blacklist_sender_lookup_tables = {
# '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
# '[email protected]'=>[qw( [email protected],org .d2.example,org )],
#$per_recip_whitelist_sender_lookup_tables = {
# '[email protected]' => [qw( [email protected] .other.example.org )],
# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
# '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
# 'abuse@' => { 'postmaster@'=>1,
# '[email protected]'=>1, '[email protected]'=>1 },
# Section VI - Resource limits
# Sanity limit to the number of allowed recipients per SMTP transaction
# $smtpd_recipient_limit = 1000; # (default is 1000)
# Resource limitations to protect against mail bombs (e.g. 42.zip)
# Maximum recursion level for extraction/decoding (0 or undef disables limit)
$MAXLEVELS = 14; # (default is undef, no limit)
# Maximum number of extracted files (0 or undef disables the limit)
$MAXFILES = 1500; # (default is undef, no limit)
# For the cumulative total of all decoded mail parts we set max storage size
# to defend against mail bombs. Even though parts may be deleted (replaced
# by decoded text) during decoding, the size they occupied is _not_ returned
# to the quota pool.
# Parameters to storage quota formula for unpacking/decoding/decompressing
# Formula:
# quota = max($MIN_EXPANSION_QUOTA,
# $mail_size*$MIN_EXPANSION_FACTOR,
# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
# In plain words (later condition overrules previous ones):
# allow MAX_EXPANSION_FACTOR times initial mail size,
# but not more than MAX_EXPANSION_QUOTA,
# but not less than MIN_EXPANSION_FACTOR times initial mail size,
# but never less than MIN_EXPANSION_QUOTA
$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
$MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
$MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
# Section VII - External programs, virus scanners
# Specify a path string, which is a colon-separated string of directories
# (no trailing slashes!) to be assigned to the environment variable PATH
# and to serve for locating external programs below.
# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
# relative to the chroot directory specified;
$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
# Specify one string or a search list of strings (first match wins).
# The string (or: each string in a list) may be an absolute path,
# or just a program name, to be located via $path;
# Empty string or undef (=default) disables the use of that external program.
# Optionally command arguments may be specified - only the first substring
# up to the whitespace is used for file searching.
$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
$gzip = 'gzip';
$bzip2 = 'bzip2';
$lzop = 'lzop';
$uncompress = ['uncompress', 'gzip -d', 'zcat'];
$unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
$arc = ['nomarch', 'arc'];
$unarj = ['arj', 'unarj']; # both can extract, same options
$unrar = ['rar', 'unrar']; # both can extract, same options
$zoo = 'zoo';
$lha = 'lha';
$cpio = 'cpio';
# SpamAssassin settings
# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
# of the option local_tests_only. See Mail::SpamAssassin man page.
# If set to 1, no tests that require internet access will be performed.
$sa_local_tests_only = 1; # (default: false)
#$sa_auto_whitelist = 1; # turn on AWL (default: false)
$sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
# (less than 1% of spam is > 64k)
# default: undef, no limitations
# default values, can be overridden by more specific lookups, e.g. SQL
$sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
$sa_kill_level_deflt = 22.0;
#$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
# at or above that level: bounce/reject/drop,
# quarantine, and adding mail address extension
# The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
# may also be hashrefs to hash lookup tables, to make static per-recipient
# settings possible without having to resort to SQL or LDAP lookups.
# a quick reference:
# tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
# tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
# kill_level controls 'evasive actions' (reject, quarantine, extensions);
# it only makes sense to maintain the relationship:
# tag_level <= tag2_level <= kill_level
# string to prepend to Subject header field when message exceeds tag2 level
$sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
# (only seen when spam is not to be rejected
# and recipient is in local_domains*)
$sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
# Example: modify Subject for all local recipients except [email protected]
#$sa_spam_modifies_subj = [qw( [email protected] . )];
# @av_scanners is a list of n-tuples, where fields semantics is:
# 1. av scanner plain name, to be used in log and reports;
# 2. scanner program name; this string will be submitted to subroutine
# find_external_programs(), which will try to find the full program
# path name; if program is not found, this scanner is disabled.
# Besides a simple string (full program path name or just the basename
# to be looked for in PATH), this may be an array ref of alternative
# program names or full paths - the first match in the list will be used;
# As a special case for more complex scanners, this field may be
# a subroutine reference, and the whole n-tuple is passed to it as args.
# 3. command arguments to be given to the scanner program;
# a substring {} will be replaced by the directory name to be scanned,
# i.e. "$tempdir/parts"
# 4. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating NO VIRUSES found;
# 5. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating VIRUSES WERE FOUND;
# Note: the virus match prevails over a 'not found' match, so it is safe
# even if 4. matches for viruses too;
# 6. a regexp (to be matched against scanner output), returning a list
# of virus names found.
# 7. and 8.: (optional) subroutines to be executed before and after scanner
# (e.g. to set environment or current directory);
# see examples for these at KasperskyLab AVP and Sophos sweep.
# NOTES:
# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
# (which can be handy if all you want to do is spam scanning);
# - the order matters: although _all_ available entries from the list are
# always tried regardless of their verdict, scanners are run in the order
# specified: the report from the first one detecting a virus will be used
# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
# - it doesn't hurt to keep an unused command line scanner entry in the list
# if the program can not be found; the path search is only performed once
# during the program startup;
# CORROLARY: to disable a scanner that _does_ exist on your system,
# comment out its entry or use undef or '' as its program name/path
# (second parameter). An example where this is almost a must: disable
# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
# program happens to have a name matching one of the entries ('sweep'
# again comes to mind);
# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
# for interfacing (where the second parameter starts with \&).
# Keeping such entry and not having a corresponding virus scanner daemon
# causes an unnecessary connection attempt (which eventually times out,
# but it wastes precious time). For this reason the daemonized entries
# are commented in the distribution - just remove the '#' where needed.
@av_scanners = (
# ### http://www.vanja.com/tools/sophie/
# ['Sophie',
# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
# ['Sophos SAVI', \&sophos_savi ],
# ### http://clamav.elektrapro.com/
# ['Clam Antivirus-clamd',
# \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
# qr/\bOK$/, qr/\bFOUND$/,
# qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
# # NOTE: run clamd under the same user as amavisd,
# # match the socket name in clamav.conf to the socket name in this entry
# ### http://www.openantivirus.org/
# ['OpenAntiVirus ScannerDaemon (OAV)',
# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
# qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
# ### http://www.vanja.com/tools/trophie/
# ['Trophie',
# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.f-prot.com/
# ['FRISK F-Prot Daemon',
# \&ask_daemon,
# ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
# ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
# '127.0.0.1:10203','127.0.0.1:10204'] ],
# qr/(?i)<summary[^>]*>clean<\/summary>/,
# qr/(?i)<summary[^>]*>infected<\/summary>/,
# qr/(?i)<name>(.+)<\/name>/ ],
['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
"-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
qr/infected: (.+)/,
sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
['KasperskyLab AVPDaemonClient',
[ '/opt/AVP/kavdaemon', 'kavdaemon',
'/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
'/opt/AVP/AvpTeamDream', 'AvpTeamDream',
'/opt/AVP/avpdc', 'avpdc' ],
'{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
# change the startup-script in /etc/init.d/kavd to:
# DPARMS="-I0 -Y -* /var/amavis"
# adjusting /var/amavis above to match your $TEMPBASE.
# NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
# cp AvpDaemonClient /opt/AVP/
### http://www.hbedv.com/ or http://www.centralcommand.com/
['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
['antivir','vexira'],
'--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
(?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
# NOTE: remove the -z if you only have a demo version
### http://www.commandsoftware.com/
['Command AntiVirus for Linux', 'csav',
'-all -archive -packed {}', [50], [51,52,53],
qr/Infection: (.+)/ ],
### http://www.symantec.com/
['Symantec CarrierScan via Symantec CommandLineScanner',
['cscmdline','savsecls'],
'-a scan -i 1 -v -s 127.0.0.1:7777 {}',
qr/Files Infected: 0/, qr/^Infected: /,
qr/Info:\s+(.+)/ ],
### http://drweb.imshop.de/
['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
'-al -ar -fm -go -ha -ml -ot -sd -up {}',
[0], [1], sub {('no-name')} ],
### http://www.f-secure.com/products/anti-virus/
['F-Secure Antivirus', 'fsav',
'--dumb --archive {}', [0], [3,8],
qr/(?:infection|Infected): (.+)/ ],
['CAI InoculateIT', 'inocucmd',
'-sec -nex {}', [0], [100],
qr/was infected by virus (.+)/ ],
['MkS_Vir for Linux (beta)', ['mks32','mks'],
'-s {}/*', [0], [1,2],
qr/--[ \t]*(.+)/ ],
['MkS_Vir daemon',
'mksscan', '-s -q {}', [0], [1..7],
qr/^... (\S+)/ ],
### http://www.nod32.com/
['ESET Software NOD32', 'nod32',
'-all -subdir+ {}', [0], [1,2],
qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
### http://www.nod32.com/
['ESET Software NOD32 - Client/Server Version', 'nod32cli',
'-a -r -d recurse --heur standard {}', [0], [10,11],
qr/^\S+\s+infected:\s+(.+)/ ],
### http://www.norman.com/products_nvc.shtml
['Norman Virus Control v5 / Linux', 'nvccmd',
'-c -l:0 -s -u {}', [0], [1],
qr/(?i).* virus in .* -> \'(.+)\'/ ],
### http://www.pandasoftware.com/
['Panda Antivirus for Linux', ['pavcl','pavc'],
'-aut -aex -heu -cmp -nor -nso -eng {}',
qr/Number of files infected\.*: 0(?!\d)/,
qr/Number of files infected\.*: 0*[1-9]/,
qr/Found virus :\s*(\S+)/ ],
# Check your RAV license terms before fiddling with the following two lines!
# ['GeCAD RAV AntiVirus 8', 'ravav',
# '--all --archive --mail {}', [1], [2,3,4,You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!
Maybe you are looking for
-
Can I use the Creative Cloud libraries with Illustrator CS5
Can I use the Creative Cloud libraries with Illustrator CS5
-
How to connect my hp all in one printer to a new wifi hub?
i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all o
-
I cannot get into the app store my apple id is not working
i cannot get into the apple store via i tunes would not allow me to sign in
-
I want to print something off the glass of my all in one printer unit. It keeps acting like I am puttiing it into the automatic feeder. It seems to be stuck in this mode.When I use the printer with my computer I have no problems or with my mobile a
-
SAP Script - resize window / paragraph
Hello Gurus, I have two problems related to sap script. ( ver 4.6c) I have copied the original order confirmation form from 000 client in diff.languages like FR/DE/EN ( these forms are used by diff. offices in diff. location ) now we have to create a