Issue for DTP from DSO to open hub destination

Hello Gurus,
        I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
          " Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
          " Error while updating to target ZFIGLH03 (type Open Hub Destination)     "
      for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,

Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out.

Similar Messages

How to export data from ODS through Open hub destination ?

Hello Expert,
I ahve some data in ODS.I want to export that data to some thirdt party application through Open Hub destination .How will I do that ??
Eary reply is appreciated .

HD IS :
         1.DATASOURCE
         2.INFOSOURCE
         3.DATASTORE OBJECT
         4.INFOCUBE
         5.INFOOBJECT
1.Assume that info cube existing with data
2.Create openhuB services
    GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
     Give the 'OBJECT NAME'----Continue
In OHD Destination type Depends upon 3 types
   1.DB-TABLE
   2.FILE
   3.THIRD PARTY TOOL
3.Go for the Defination Tab give the File name
4.Create Transfermations
5.Create DTP
OPEN HUB SERVICES WITH -
INFOSOURCE:OHD---DB TABLE SPECIFY:/BIC/OH
1.Assume that info cube existing with data
2.Create openhuB services
    GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
    Give the 'OBJECT NAME'----Continue
3.Select Dbfile----->Continue
   Select file location where you want to store file .
    O.Semantic key
4.Create Transfermations
5.Create DTP
Regards ,
Praveenyagnamurthy.

Open hub destination with datasource as the source

Hi,
I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
When I try to execute the DTP, I get the following error:
<b>Datapackage processing terminated.
Error in substep
You are not authorized to use this transformation.</b>
I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
Also when we turn on the security trace, it doesn't fail anywhere.
Has anybody faced a similar problem?
Any help appreciated,
Thanks,
Payal.

I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
But I still get same error in both cases.
When I create the DTP, it tries to create a transformation. But I get an information message :
Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
I can still activate the DTP and when I run it says I don't have authorization to this transformation.
I think there are issues while creating the transformation, but I don't know what!
-Payal.

Open hub destination to download the output file into R/3

Hi Guys,
             I have a requirement where i need to down load the data from my BW cube to R/3.For this i am using Open hub destination.
While creating the open hub destination we have option called RFC Destination(in that i have selected destination as my R/3 system).When i execute my DTP it is saying the load is successful and it is showing the no.of records transfered.
But i am not able to find where this data is getting transfered From BW cube to R/3 system using open hub.

Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text =      null;
     int temp = 0;
     try
     File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
//       String File = "abc.xls";
//       String file = "anat" + ".xls";
     wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
     FileOutputStream op =      new FileOutputStream(file);
//       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
//       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
     wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
     if (wdContext.currentContextElement().getResource()!= null)
     text = wdContext.currentContextElement().getResource().read(false);
     while((temp=text.read())!= -1)
     op.write(temp);
     op.flush();
     op.close();
//        path = file.getAbsolutePath();
     path =      "/exchange/CED/"+file;
     wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
     catch(Exception ex)
          wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
Regards
Vijay Kalluri

Open Hub Destination over a Datasource as a source

Hi Expert,
I am trying to create Open hub destination over Datasource as a source
it showing me an error "Cannot connect DataSource to an open hub destination".
Can anyone tell me is it possible to create an open hub destination over a datasource
If yes then how?
Thanks and Regards
Lalit Kumar

HI lalit,
Check the below forum for refer they have refer using datasource as source for OHD m nt sure:
Open hub destination with datasource as the source
OHD ISSUE
Thanks,
Deepak
Edited by: Deepak Machal on Dec 15, 2011 11:04 AM

DTP Delta request for open hub destination.

Hi expert,
As you know, In BW 7.0, open hub destination is used for open hub service, and you can create tranformation/DTP for the destination. and in some case the DTP delta is enabled.
my questions are
1) in the context menu of open hub destination, I did not find something like manage, which could list all the DTP request executed for this open hub destination..but for normal infocube or ods, you can find a list.
2) if the DTP could enable the delta, where can I delete the latest delta request, and have a new load..
3) I assume the DTP could be excuted with batch integrated with process chain by process type 'DTP', right ? if the destination type is third party tool, can it also be integrated with process chain ?
4) can give some obvious difference of InfoSpoke and open hub destination in terms of advantage and disadvantage..
Thanks a lot for the feedback.
Best Regards,
Bin

Hi ,
Please look at the links below . hope it helps .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9?QuickLink=index&overridelayout=true
Regards
Santosh

Open hub destination of text and attribute for Functional Area

Hi Expert
I have a requirement to accommodate both attribute ( 0FUNCT_LOC_ATTR) and text ( 0FUNCT_LOC_TEXT ) for functional area in open hub destination .For this a DSO has been created from both 0FUNCT_LOC_ATTR, 0FUNCT_LOC_TEXT data sources .Problem is that DSO has 0FUNCT_AREA ( Functional Area ) as only key fields . So text for both english ( EN ) and Dutch ( NL) for particular 0FUNCT_AREA not getting loaded .If we assign both 0LANGU and 0FUNCT_AREA as composite key of dso , data from attribute transformation is loaded as blank as there is no language filed in attribute data source ( 0FUNCT_LOC_ATTR ). Please let me know how can I design to accommodate both text for different language and functional area for open hub destination .
I know that I can create separate open hub destination for master data TEXT and Attribute.
Any help is highly appreciated.
Regards
Saikat

HI Saikat,
You can create an additional characteristics counter and make it a key field in the DSO.After that we can populate this characteristics in the end routine .It value would increase by 1 everytime different text comes for the same functional area.
Sample code
data: counter type n,
w_farea type /bio/oifunc_area.
Sort result_package by func_area.
count =0.
*checking whether we have the same functional area or we have a different functional area.
Loop at result_package assigning <Result_fields>.
if w_farea is initial or w_farea = <result_fields>-func_area.
count = count +1.
else
count =1.
endif.
w_farea= <result_fields>-func_area.
<Result_fields>-zcount = count.
ENDLOOP.
Clear w_farea.
This way the value of counter would get increased by one everytime a new text comes for the same functional area.We can have any number of texts for the same functional area by this method.
The only issue would be when some delta update comes for the existing text in this method.If you are doing a full load to the DSO from the datasource, then there would be no issue with this method.

Issue in Data from DSO to DSO Target with different Key

Hello All,
I am having Issue in Data from DSO to DSO Target with different Key
Source DSO has Employee + Wage + Post numner as key and Target has Employee + Wage Type as key.
DSO semantic grouping works like Group By clause in sql, is my understanding right ?
Also if someone can explain this with a small example, it would be great.
Many Thanks
Krishna

Dear, as explained earlier your issue has nothing to do with semantic grouping .
Semantic grouping is only usefull when you have written a routine in the transformation for calculations and in error handling .
Please go through this blog which explains very clearly the use of semantic grouping .
http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/06/16/semantic-groups-in-dtp
Now coming to your above question
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          cc          300
If we have semantic group as Employee . If we have Employee as key of the target DSO and update type as summation .
then target DSO will have
Emp                Amount
100                 700
200                 200
In this case Wage type will be the last record arriving from the data package . If the record 100 cc 300 is arrivng last then wage type will be cc .
2) Case 2
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          aa          300
if we do Semantic grouping with Emp and Wage Type   If we have Employee and wage type as key of the target DSO and update type as summation .
then target DSO will have
Emp     Wage      Amount
100          aa          500
200          aa          200
100          bb          400
Hope this helps .

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

Open Hub Destination Delta issue

Hi experts,
We have a scenario in which a Open hUb is created on top of a cube.
Regular delats are moving from this cube to Open hub daily.
But as per the request, we had to dump the cube data, and the reload took, 2 days to complete.
So, that 2 days, data got missed in Open hub.
Now, as the new request are not datamarted, next time wen the DTP between Cube and Open Hub runs, it will fetch all the requests right. we dont want that.
So, can we run a init w/o data transfer so that source status will be fetched?
but then how to load that 2 days data alone.
Kindly advise.
Edited by: neethacj on Mar 7, 2012 1:06 PM

If the cube doesnt have any other targets aprart from this OHD,
delete the two days requests in the cube, set the init from cube to ohd
load the cube for delta( brings two days requests) and run the ohd

Open Hub Destination - From BI7 to R/3 error

Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna Goyal

Hi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Open Hub Destination with Application Server Issue

Hi all,
I have requriment that i need to save my monthly data in application server with the help of OPen Hub Destination.I have created an DSO
on that DSO i have created an Open HUb with application server as target.When i store my every month file in application server that file name should be a per the system date.
So i have Created an LOgical File----ztest_data
Assgined Physical path to Logical File-----/usr/sap/<sysid>........
created an Logical File name------Ztest_data_file....
IN the open HUb i have selected Aplication Server as My target and i have checked the box.
I have selected Logical FIle name and given the file name which i have created-----ztest_data_file...
Runned DTP it is showing no errors,but when i check in AL11 ,in the path which i have given(/usr/sap/<sysyid>........,i couldnt find the file.....
Please check this and let me know...
Thanks In Advance,
Bobby.

Hi,
Please check the link /people/jyothi.velpula/blog/2010/01/20/creating-open-hub-destination-using-a-logical-file-to-extract-the-data .
Also is your DTP full or delta. Try running the DTP as Full.
Hope it helps.
Best Regards,
Kush Kashyap

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Issue for DTP from DSO to open hub destination

Similar Messages

Maybe you are looking for