Issue found on 5GFS while updating gratuity final settlement

Hi All,
Issue found on wage type-5GFS while updating gratuity final settlement .

Can you pl elaborate on the issue, if any help is needed.
or close the thread

Similar Messages

  • No DDL commands found for activation while updating SPAM/SAINT

    Hi,
    Hi,
    While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
    error in activation.
    If we check the logs we found error related to no ddl command found for
    activation
    No DDL commands found for activation of /SDF/SWCM_PAT03D
    No DDL commands found for activation of /SDF/SWCM_PAT03P
    No DDL commands found for activation of /SDF/SWCM_PAT03Q
    No DDL commands found for activation of CLNT_CVERS
    No DDL commands found for activation of CLNT_CVRS2
    No DDL commands found for activation of CVERS_SUB
    No DDL commands found for activation of PAD03
    No DDL commands found for activation of PAT05
    No DDL commands found for activation of PAT06
    No DDL commands found for activation of PAT09
    No DDL commands found for activation of PAT10B
    No DDL commands found for activation of PATPRDVRS
    No DDL commands found for activation of PATRTVERS
    No DDL commands found for activation of PATSWFEATR
    No DDL commands found for activation of PATSWFTINC
    No DDL commands found for activation of PRDVERS
    No DDL commands found for activation of STACKCOMPS
    No DDL commands found for activation of SWFEATURE
    No DDL commands found for activation of SWFEATUREINC
    No DDL commands found for activation of TECHUSAGES
    No DDL commands found for activation of TFDIR_INIM
    No DDL commands found for activation of TRBAT3
    We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
    Attaching the error log files
    System Details:
    SAP NetWeaver 2004s
    Database: DB2 10.5
    Can anyone help us in this

    Hi Amit,
    From the logs you attached
    2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2                    " - repe
    2WETP000 at
    2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N  The name of the object to be created is
    2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW".  SQLSTATE=42710" in DDL
    2EETP345  statement for "CLNT_CVRS2 
    Can you check in database for the existence of the object.
    Also what is your kernel level ?
    Regards,
    Deepak Kori

  • While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

    While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
    Can anyone help me to resolve this issue.

    Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
    First did a full back up of  iphone using iTunes
    Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
    Disconnected USB cable from iphone
    Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
    Pressed and kept holding Home button while plugging cable back into phone
    I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
    Recovery Mode alert came up in iTunes.
    Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
    iphone did not appear in iTunes due to missing pairing file (that made me nervous)
    iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
    Eventually the iphone asked if I wanted to restore from a back-up (whew!)
    A window opened in iTunes and I was able to select my previous back-up file for the restore
    A full restore from back-up then occured
    I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
    When the restore was done I had to re-enter some passwords, but everything was there
    iOS is now 5.0.1 (9A406). The whole process took about an hour.

  • Reg : BDC issue while updating infotype 40 inside BADI class method

    Hi Friends,
         Actually in my badi class, there is a method where i need to save the infotype fields including comment fields.. So with BDC recording i recorded screen fields and passing the pernr internal table values to recorded pernr values.. by doing this im getting error and so BDC is not upadting the data.. moreover if i pass directly pernr number within single quotes, BDC is working fine and data is getting updated..
    bdc_field        'RP50G-PERNR'   pernr.  --> Error Message while calling transaction through BDC
    bdc_field        'RP50G-PERNR'   '00001234'  ---> updating successfully..
    1. Tell me whether the issue is with BADI or wat ? means we cant able to use BDC inside badi ?
    2. I also tried changing my internal table value of pernr to type 'C' of length 8.. eventhough its showing error..
    Please tell me what i need to do .... ?

    Hi  Dilek Ersoz Adak ,
      I also tried with that, but getting same error..  Below is my error im getting while updating BDC through call transaction,
    1     PA30     SAPMP50A     1000     E     K     PBAS_SERVICE     001     HRADMIN     EPPRELE 00000121     HRAdministrator          CTU     RP50G-PERNR
              Person is treated already by the HR Administrator

  • Halo, i hav an ipad2 version 4.3.5. now i went for updating it and while updating it shows error 4005. Pls help me in fixing this issue

    halo, iam using an ipad 2 and it was in version 4.3.5. Thought of updating it and went for it. While updating it shows error 4005 and i couldnt fix it. Can some one help me to fix this issue.

    You've tried the other things on those pages e.g. tried a different USB port on your computer and a different cable, tried the other pages that the first link
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Do you have a different computer that you could try ?
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

  • While trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    while trying to access my local network I get the message..."The page could not be opened because server cannot be found."  This, after updating to Yosemite and paying (again) for the server app.

    It's absolutley scandalous that a company with Apple's resources can let this happen.  They should have staggered the release by region rather than opening the flood gates.  The upgrade itself took me about 10 attempts to download it, and then I thought I was home free.  That was until it rebooted and won't activate.  It's over 2 hours now.
    Scandalous!

  • BDC to update CAT2 transaction.one issue while updating CAT2 transaction

    Good Day Friends,
    i have one issue while updating CAT2 transaction,
    i have enhnced 3 custom fields in CAT2 tx-code. while updating through manually the data is getting stored in CATSDB tx-code for this i have done validation in enhamcement spots ECC 6.0.
    but when i am running bdc this custom field data is not updating in CATSDB table.
    my dout is will  BDC work for enhancement spots or not , also please suggest if you have any idea ?

    Hi,
    Usually I am trying to avoid BDC. So I would try to use BAPIs BAPI_CATIMESHEETMGR_INSERT and BAPI_CATIMESHEETMGR_CHANGE. Similar to other BAPIs, you can pass values for your extended fields using table EXTENSIONIN. It's described in BAPI's documentation or look for EXTENSIONIN on SDN. The principle is same for all BAPIs.
    Regards

  • My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

    Hi,
    My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
    Expecting some quick solution in this regard,
    Thanks
    Prabhu

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Will it cause issues if i received texts and a reminder i had set for myself while updating?

    iphone4: i started updating my iphone to the latest version and i received a popup reminder i had set and forgot about and a text, will that cause damage to hardware or software/ issues from receiving it while it was updating/installing? any damage? can you tell i am technologically ignorant thanks in advance!

    You tell us. Did it?

  • Issue while updating field SCHZU (shift Premium) in table view  V_T508A

    Hi All,
    I am facing an issue while updating the field SCHZU(Shift premium) in Table view V_T508A.For some WSR entries when i am trying to update the shift premium say with a value 19400,the value is accepted.However for some other WSR entries,the value for shift premium gets modified to 19.400.Can someone please let me know why this error is occuring and how to rectify the same.
    Regards,
    Punam Jha

    usually its a percentage value. please check what value you enter

  • Issue while Updating a table having Unique Secondary Index

    Hi,
    I am trying to update a 'Z' table in which there are 5 fields comprising of primary key. Out of them 2 key fields are defined as a part of seconadry index with 'Unique' option selected.
    As per the requirement, I am trying to update the table using modify statement so whenever this statement occurs it will check the primary keys and accordingly try to m

    958572 wrote:
    Hi,
    We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
    1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
    its a simple update statement as below
    UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
    there is a PK index on ID2 column.
    2)we also came to know that there were no locks on TABLE1 during this time.
    can some one please let me know what could be the possible reason for this kind of exception?
    ThanksOS/Networking mis-configuration.
    Oracle does not know or care about the type or flavor of remote client (JDBC, OCI, ODBC, etc).
    Oracle's default configuration contains no timeout.
    I suspect a FireWall setting.

  • Issue with field data type NUMBER(22,5) while updating field data.

    Hi,
    I have a field with data type NUMBER(22,5).
    While inserting or updating field data it should take 17 digit and after decimal point 5 digit total 22 digit.
    I set 22 for maximumLength property of messageTextInput field.
    While updating field I am getting following problems,
    1) I provide the value as 1234567890123456789012 (22 digit) and click apply button.
    then I got error message as
    Error
    मैकेनाइजड दो पहिया/तीन पहिया वाहन - Value 1234567890123460000000 exceeds the maximum allowed value (NUMERIC (22, 5))
    2)then I insert 12345678901234567.1234 (17 digit before decimal point and 4 digit after decimal point and it didn't accept 5 digit after decimal point) and click apply button.
    It insert the value as 12345678901234600 (value changed after Apply)
    The I tried with simple SQL insert statement to insert data and it successfully insert 12345678901234567.12345 value.
    Any item property I missed here to set?
    Please suggest.
    Thanks & Regards,
    Sagarika

    hi
    according to
    " then I insert 12345678901234567.1234 (17 digit before decimal point and 4 digit after decimal point and it didn't accept 5 digit after decimal point) and click apply button.
    It insert the value as 12345678901234600 (value changed after Apply)"
    this statement ,it seems that it is definitely applying round or somthing like that function in the code before inserting value in the table("try with select round(12345678901234567.1234 ) from dual u will get the same result = 123456789012345600 ") ,
    bcz u r able to insert the same directely into the table using insert statement so kindely have look on the code if something like this is not happening there.try to check code in related EOimpl class
    try to to use debugging mode ,and the 23 char problem is related to maximum lenghth of text box make it 23 it will get resolved and u will be able to enter 17 digits with 5 digits after decimal point
    thanx pratap

  • Error while updating my WP

    Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole

    @RoukailaRedouane
    Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
    More information can be found here:http://support.microsoft.com/kb/910336/en-us
    Happy to have helped forum with a Support Ratio = 42.5

  • Error while updating to target

    Hi Friends,
    Im trying to load the data from the DSO to the cube, while loading the data im getting a error "Error while updating to target CUBE Name".
    when i check the message in error stack im getting this "Value 'Complaints Resolution for Activity ' (hex. '0043006F006D0070006C00610069006E007400730020005200') of characteristic ZWF_NAME BRAIN 60"
    I found a notEe 1148007, this not says that
    "A program to write data is generated for each InfoCube that contains data (type "Standard"). The name of this program is stored in the table RSDCUBELOC.  When you activate an InfoCube again, the name of this program may inadvertently be deleted.
    In the DTP monitor, this error occurs in the "Update" step and message RSBK 241 is displayed: "Error while updating to target G7SD0C05 (type INFOCUBE)"
    I have checked the table RSDCUBELOC and i can see the program entry there and after that i have reactivated the cube and reloaded the data but im still getting the same issue.
    Can anyone pls suggest me how to resolve this issue?.
    Thanks in advance
    BN

    Hi,
    It is issue with the Lowe case letters of a particular info object.  You have to write a routine to convert those lower into upper.
    reason is if you chack IOB properties Lower case might be unchecked and the data you are getting in lower case.
    Let us know the details if you still have any issues.
    Reg
    Pra

  • Error while updating pricing item

    Hi All,
    I have an issue to ask, the problem is this issue not happen every time, and sometimes it can solved it self.
    We are using SRM 5.0
    SRM_SERVER     550     0008     SAPKIBKT08     SRM_SERVER
    SAP_AP                  700     0008    SAPKNA700      SAP Application Platform
    Its about  Error while updating pricing item 49ABA6C4998216D9E1000000AC103B65 (document 49ABA6CE998216D9E1000000AC103B65) which i found in SLG1 and SM53.
    When this issue occured, all transaction cannot be process, like : transfer ext requirement from R/3 to SRM --> failed , then when generate PO from accepted quotation , the PO net price will be zero.
    All the error is the same, error has occured in pricing.
    I already check using program
    RSVMCRT_HEALTH_CHECK  and BBP_CND_CUSTOMIZING_CHECK , IPC is running and all java enviroment message status = green, but if i simulate using a product, it will show error in pricing.
    Can you please help to advise if any of you ever facing the same error, your respond will highly appreciated.
    Regards,
    w1n

    Hi,
    I think buffer has old condition.
    Please run the Function Module IPC_DET_CLEAR_CUST_BUFFER.
    OR reset the VMC -> Reset  in SM52.
    Regards,
    Masa

Maybe you are looking for