Issue free material to subcontrractor

Hi..
can  any one explain me if it is possible to issue a valuated materail to subcontractor as free material..
Regards
SARFRAZ

Hi Sarfarzny,
Create a Subcontracting PO , using ite mcategory L and in the item overview check the free delivery indicator.
Save the Po.
and then issue the Material using Tcode MB1B , mvt type 511 and in the pur . odr field enter the Po No. and save it.
It will work
Reward if useful
Aasif

Similar Messages

  • Issue of Material on free /Fixed rate recovery basis to contractor

    Hi friends,
    I have one scenerios as follows:
    Purchasing dept. issues one contract to service provider with some conditions like some of the material willbe issued on free basis, some of the material willbe issued on fixed rate recovery basis. Is there any facility to-be provided in contracts with materials and fixed prices otherthan sub-contracting procedures.
    with 541 movement type we are transferring our material to contractor and simulateneously he will submit monthly consumption statement, based on the statement we have to book that qty for project consumption. Can we book consumption from vendor stock?
    Please guide me. If required i will provide further details..
    Awaiting for reply..

    Hi,
        The best way to handle this scenarion in ps:
    1.The vendor who is engaged to carry out services for the project can be charged with service entry sheet , which is the simplest way rather than using claims management.
    2. If the vendor is engaged for the project & he has been instructed for free issue of material for services, If  any case he has been charged with extra materials,So in that scenario for  the extra service done by the vendor to the material will be charged, and this amount can be increased through po ammnedment for invoice to that vendor, rather than FI postings & claim management, And remaing process of collecting the material from stores on reservation basis, & issueing material to vendor for free issue will be same scenaio.
    Regards,
    RSPSBZ

  • Free Material Delivered by Vendor

    Hi
    I have a situation regarding free goods that were delivered by vendor in excess to the amount ordered in PO. We had ordered 2000 units but 2700 were delivered. How to post the GR in this case without changing the PO. I know that one easy method is to change the PO and check the Free indicator after adding extra line item for the extra material but changing PO is not an option here. What are the alternates ?
    Thanks
    Sohaib

    Post the GR of 2000 against the PO.
    for the remaining 700 , you have 2 options for Goods receipt without reference :
    501 - GR Without Purchase order
    511- GR of Free Material
    In case of 501 movement Type - Stock will update MAP (Moving Average Price) but in 511 movement case Stock without any accounting document. I.e. means There will be no Accounting document generation.
    Delivery Free of Charge
    If you receive a free-of-charge delivery from a vendor without a PO having been issued beforehand, you post the free delivery as an other goods receipt. In the standard system, you specify a text and a vendor for each item. This control for the Text and Vendor fields can be changed depending on the movement type 511 in Customizing for Inventory Management and Physical Inventory under Settings for Enjoy Transactions u2192 Settings for Goods Movements (MIGO) u2192 Field Selection per MvT Type.
    For Free Material, Price control plays a crucial role for Accounting entries.
    1. If the material is valuated at moving average price, the stock figure is updated on a quantity basis only, not on a value basis. Thus the total stock quantity increases but the total value of the stock remains unchanged. This results in a reduction in the moving average price.
    2. If the material is valuated at standard price, the stock figure is updated on a quantity and a value basis. The receipt is valuated on the basis of the standard price. The offsetting posting to the stock account posting is made to a revenue account for price differences.

  • Issuing free sample

    Free sample issued with movement type z01 enty is Free sample expenses A/C------Dr 500
                                                                                    To Inventory FG                                   500
    the above entry is for plant 1119 and when we cancel the dekvert entry coming Inventory FG A/C -
    Dr 500
                                                                                    To Free Sample Exp A/C    500
    Movement type is Z02
    when the same thing we are doing for plant 1128 Issuing Free sample through mov type z01 entry coming
    Free sample expenses A/C -
    Dr.500
       To Inventory FG A/c -
    500
    But when we canceling the enty through VL09 enty entry coming Inventory FG A/C -
    Dr 500
                                                                                    To COGS A/C -
    500
    Movement type is Z02
    I have checked OMWB for both the plant with material code and movement type Z01 Free sample expenses A/C code is maintain against ZAX with posting Key 81 & 91. Now what  shell I check.
    Regards
    Abhisekh

    Hi,
    Check the following.
    Whether in Plant 1119 entry was canceled using  VL09 transaction using Z02, If yes check the account modifier assigned to the mov.type - Z02.
    Also check whether you have assigned any valuation modifier to your valuation area in OMWD.
    Also check the GL assigned in OBYC transaction against the corresponding transaction event key and account modifier.
    Thanks & Regards,

  • How to capture the excise duty on free material purchasing?

    Scenario is like this if we purchase a lot of material then vendor gives free on some qty. then we make a purchase order for free material with tax code zero. Vendor supply that free material with excise duty. Now we do GRN & take part1 entry. How to capture part II entry. This is capital item.

    If you are following J1IEX route , then Tick MRP indicator & enter Excise duty values & take Part2.
    It is assumed that all other master data like chapter heading etc are set.
    Hope this will help.
    Regards,
    AK

  • Issue of material should not be allowed if stock not available on that date

    All SAP Gurus,
    If we have zero stock for a material on 01.02.2009.
    We make GR on 10.02.2009.
    Now, if we try to issue the material on 01.02.2009 (after making GR on date 10.02.2009).
    Then system allows me to post the document.
    We don't want to restrict the back dated posting.
    Only we want  to restrict the posting if stock for the material is not available on that particular date (because it results in negative closing stock for that date.
    How it can be done?
    Regards,

    Hi
    Try making M7/021 message as error message and issue the material which is not there in stock.
    Thanks

  • Issue in Material Master data replication in SRM 7.13

    Hi All,
    We have implemented SRM 7.13 and facing an issue in material mater data delta replication.When we create a new material in ECC it does not get replicated to SRM and gives the ERROR 'Specify the relevant unit of length' and 'Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.'  in SMW01.
    But when changes are done to the same material in ECC it gets repicated without any issues.
    Please provide your help to reolve this issue.
    Thanks,
    Ankur

    Hi Ankur
    Check your settings in CUNI transaction which UOM is this happening for or for all ?
    You should go to that and check what are the conversion values maintained As seen below
    In CUNI transaction go to utlilties > Adjustment select your R/3 system and click on Check mark
    Also replicate the UOM from backend . By going to R3AS and fill DNL_CUST_BASIS3 and execute
    Lastly go to Table T006 and T006A and click on Check table ...
    Doing this would sync your UOM with that of ECC and ideally the error should vanish if not
    share the screenshots
    You can solve the errors mentioned above by implementing the following notes:
    Call transaction SE16, enter SMOFAPPL, and set entry EBP.
    Check the notes as below
    520227 - Set type CRMM_PR_TAX (implement manually!)
    720819 - Consumer entries
    428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
    675101 - Execute report: COM_CATEGORY_TRANSPORT
    Note 872533 - FAQ: Middleware
    Note 402591 - Download Customizing object DNL_CUST_BASIS3
    Note 1609476 - Error loading tables DNL_CUST_PRICE and DNL_CUST_BASIS3 from ERP.
    Note 393939 - Table TCURX is not downloaded from R/3 System
    Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
    Also refer to these who faced similar issue as yours
    http://scn.sap.com/thread/1769891
    http://scn.sap.com/thread/1355188

  • Error during Post Goods Issue of Material in VL02N for STO Purchase Order

    I am getting one error message during Post goods issue of Material for STO Purchase order.
    I am doing the Post goods issue in T code VL02N
    Error is " Account type D is not defined for Document type WL"
    What is the settings required to be done.
    Thanks,
    Shailendra

    Please check Plant customer master reconsilation account properly maintained or not in XD03 transaction.

  • Excess Issue of Material against Production Order

    Hi
    For Goods Issue of Material against Production order , i want the system to control excess issue of material against Production order.  How can it be controlled.
    Regards
    Madhesh Kumar

    Hi Madhesh,
    there are many loop holes to issue excess stock against production order
    so better you use user exit so that when ever any material issued against production order and it is in excess then throw error
    Thanks
    Bala

  • Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  How do I recover iTunes?

    I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop.  How do I recover iTunes?
    I'm switching from a 3G phone to a blank 4GS in the process.  I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
    Thanks

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • Setting for issue subcontract material with ME2O

    Hi,
    In our system presently we are issueing all the material to subcontract with MB1B movement type 541,  I wan tto knowthe settings and process of issue the material with ME2O, what settings are needed this is to control some that we can see the issue qunaity against that PO to the vendor.
    regards,
    zafar

    Hi,
      I have created a Subcontract PO now in ME2O I can see that POthen I select the PO number and click on Post goods issue,  but system is giving error message
    Please select header line(s) or reservation(s)
    Message no. ME152
    but which is the this header line or reservation i have not found reservation number in ME2O screen in our system.
    regards,
    zafar

  • Issue of material for MO

    Gurus,
    I create a maintenance order.Generally i issue to 261.In case  if i want to issue the material to 2019Cost center).Is this ok.What will happen if i issue to 201.

    Hello,
    First of all The movement type which is to be used for GI is configured through Customization settings. Therefore it appears in the gray mode. If you want to change then you have to change the customization.
    Second if you will create the reservation through PM order then it will always take 261 movement type. Now if you want to issue it to cost center then create a reservation through MB26 and assign the desired  cost center and movement type 201.
    But by doing this the cost will not be reflected in the PM order or any cost report of PM order.
    Regards
    Naveen

  • Required reference document to issue the material from project stock

    Hi All,
    we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
    the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
    i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
    please help me out to resolve this requirent.
    manoj singh
    we can

    Hi,
    Did you implement PS module in your system?  How were your project stocks reserved?
    Cheers,
    HT

  • Issue of material to Vendor

    Hi All,
    I have a subcontracting PO against a sales order with Acct Assgnt Cat."E" wherein I wish to issue the material to the vendor from special stock.
    kindly explain how to issue the material and where do i look for the same..541 mvnt is not working in this case...
    regards

    First Transfer the Sales Order Stock to Unrestricted using MB1B 411 E Movement type.
    Then Using MB1B 541 Movement type Issue Components to Subcontractor.
    Regards,
    Ashok
    Close this Thread, If Answered.

  • Errors Message while issuing the material in MB1A i.e unrestricted material

    Hi Expert,
    I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
    Regards,
    Ram Rathode

    You are not clear. What is the error message that you get?

Maybe you are looking for