Issue from updating spry from 1.4 to 1.6.1

I have an .xml file that carries the information for a table
created by spry. Below is an example of how I wrote the address
node in v!.4 There were no problems in writing the code this way
and it displayed as desired.
After the update to v1.6.1. The code displayed differently.
When previewed in a web browser the address will show up and the
line will break to the next line, but also the <br /> tag
will be seen. Is the new update unable to use the CDATA function or
is there something new that has to be done to the .xml document?
thanks

iM08 and iMHD& have a very different way of file manangement..
the only way to 'swap' projects is to create a 'consolidated' single quicktime file - in iM08: 'Export ussing QT..' , choose dv-stream for Standard, AppleINtermediate for HiDef projects..
as said: that consolidates the project; e.g. you can not 'correct' titles, erase disolves, fade audio parts etc.
so, you have to keep in mind, what should be done in the other app, BEFORE editing.. e.g. if you like to use iMHD6 as 'effects machine', transfer only the clip you want to process - after adding effect, re-import that into iM08 to integrate into project.

Similar Messages

How can I get back old issues from my TIME app?

Hi, I hope someone can help me. I've been trying to get help for a month now. I had purchased several issues from TIME app but when I just got my ipad 2, I couldn't get the issues back. I used the same ID and password. I decided to try buying a new issue and when I did, I had an email from itunes warning me that it was not my usual ID. I am very confused. I wrote to TIME and they say I should contact itunes. I have spent hours trying to contact itunes for help. They seem uncontactable. Can someone please tell me if I can somehow get my old issues back?
Karen

If they were not backed up or part of photostream, then no, you cannot.

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Have a look at this it might help
http://support.apple.com/kb/TS4148

Goods Issue from ECP with Batch Management

Hi experts,
I would like to make a Goods Issue from Execution Services in Easy Cost Planning. But the material has Batch Management active and I am not able to inform the batch.
I know I can make the same movement from MB1B but I would like to do it from the Easy Cost Planning environment.
Is it possible?
Thanks

mforman wrote:
We already have the batch and deactivating batch management has no sense.
> We need to be able to inform the batch when we are making the goods issue from the Execution Services.
Dear,
I think you can solve this through your Characteristics in the Costing Model. In the Characteristic Edit Screen, Goto Values tab, Select your material and click on Object Dependecies Button, see if you can use or create a new Dependency for your material for picking or suggesting batch number.
Hope this helps...
Thanks,
Ranganatha. Patnala
Edited by: Ranganatha Rao.P on Oct 14, 2011 2:59 PM

How to do Goods Issue from Sales Order Stock?

Dear All,
we are doing a trading Scenario & based on customer requirement we procure the goods from our vendor & we receive it to Sales Order(special) Stock. Now what are the settings to be done in the Sales/Shipping so that when we do a delivery for our customer the Stock is Issued from our Un-res Sales Order Stock & not from un-res stock ?
Hope its clear.
Regards,

Hi Sam,
Thanks a lot for the reply.
Sorry for not explaining the scenario in the begining.
See I have to configure a trading Scenario with some changes from the std.
As in trading Process there are 3 entities.
1. Customer - X
2. Company - Y (Who performs trading)
3. Vendor - Z
Following is the breif requirment.
Company Y generated an inquiry in system for an item with respect to customers RFQ. Now since Y doesnt manufacture the product(item) it creates a PR in background with respect to inquiry.
Based on this PR, Y procures & receives the good into Un-restricted Sales Order Stock (with ref Inquiry doc no:).
Now based on price Quoted by Z, Y will create a Quotation with ref to inquiry & finally a SO for Customer - X with ref to the Quotation.
Now at the time of delivery (creatd with ref SO) system is not able to issue the goods from the sales order stock since the stock is stored with ref to inquiry no: & delivery is with ref to SO.
So I am planning to simulate a cycle by creating a delivery & PGI with ref to Inquiry.
If you can suggest a way out, it will be highly appreciable.
Hope its clear.
Regards,

Issue from Production !!!!!!!!!!!!!!

Hi Everyone !!!!!!
Actually i had made Production Order Form in which i can populate all the Production order with respect to BOM (Bill of Material).
Now i want to Populate Specific Production Order Number another form which is "Issued for Prouction " Basically Now i want to developed another form which can be worked Like Issue from Production Screen.
For this i have to use Production Order Object in SAP based....
Could anybody have sample code for this .......that would be really helpful for me,
The Main Problem is that i do not know how it will start ? how can i get the Production Order as well as their Item List.....and how can i issued Production Order in Issue from Production Form.....
could you guide me that where should i have to start ........
Thanks
Regards..
Rizwan

hello
Check the following thread:
Regards
János

Connectivity issues from Oracle to Sybase

Friends.
I have connectivity issue from Oracle 9.2.0.1 to Sybase 12.5 ASE .I am connecting through the database link in oracle to access the tables.
The error message i am getting :
select count(*) from TEST_TABLE@IND_TEST;
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
523 80
ORA-02063: preceding 2 lines from IND_TEST
Please guide me how to solve this error message. is it version incompatible now?
Thanks
Rocky

Hi,
You are now making the connection to the Sybase database but there is a problem with the user and password used in the database link.
Sybase is case sensitive for names so you need to surround the user/password in double quotes to make sure they are passed to Sybase in the correct case -
create database link ind_test connect to "sybuser" identified by "sybpass" using 'tnsnames_ora_entry' ;
where sybuser is the userid as created in Sybase with the password sybpass.
If they were setup in Sybase in mixed case then it would be -
create database link ind_test connect to "Sybuser" identified by "Sybpass" using 'tnsnames_ora_entry' ;
Regards,
Mike
Edited by: mkirtley on Sep 27, 2011 12:55 PM

About goods issue from vendor consignment stock

Hi, I meet some issue needs your help!
The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
stock for this delivery base on the actual process?
thanks
Best Regards,
Rory

Hi
In R3 it is not possible
If say material X is 100 units lies in your premises the vendor consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
But the same scenario is possible in IS retail
For this iS retail server is reqd
In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
You can search SAP library regarding the settings of the same
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
Regards
Raja

CS service order budget can't control goods issue from stock?

Hi experts,
I set budget to a service order(CS), it can control Purchase order from service order, however it can't control the good issue from stock(type "L") ! Is it the setting problem? how to deal with it?
best regards
lance

1st
If you actually bothered to read my post, you would see that I decided to change for the X220 after I saw it in the flesh and realised how much close it was to the X121s dimensions. If lenovo wishes this not to happen very often, they should bother do something about the fact that there is no Lenovo dealership/agent/representative in Oxford.
2nd.
If Lenovo lists paypal as payment method, they should honour it. Otherwise, do not list it at all.
3rd.
If lenovo says that I can cancel the day I ordered with no implication, they should also honour this. Not ignore my e-mails (contrary to the terms & conditions stated) and ship it so I can perhaps keep it. That's not good business practice. That's playing dumb.
They had 5 days to cancel, they prefered to wait for the item to be produced/stocked so that they can ship it to a small hamlet in Oxfordshire (half the way around the globe) so I can send it back. So yeah, this little laptop will circumvent the Earth.
If this is not wasteful, then what is?
As far as I am concerned, it took me 10 telephone calls and to DR just to get the cancellation e-mail which should be sent immediately.
If you do not value your time, it is your problem, not mine.
I will not be buying a Mac either as I do not like the product, but the difference in service couldn't be more stark.
All the best,
Sav.

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

DESADV is not generated during Goods issue from VT02N.

Hello,
DESADV is generating during goods issue from VL02N.
But DESADV is not generated during Goods issue from VT02N.
Any idea what was missing?
I maintained the variant of RV56ABST for Delivery message with output type LAVA and Medium 6 (EDI).
Thanks,
Venkat

I got reply from SAP. It is as follows:
Please goto tcode VL10CUC. For Profile 2000, please check whether
indicator "No OutputDet." is flagged.
Please unflag that indicator and then retest.
Please read note 1410599 for more inforamtion.
Thanks,
Venkat.

Confirmation should not be allowed till materials issued from store

Hello friends,
I have a production order in which one material is issued automatically by Backflush function in confirmation and other material is issued manually. I want that confirmation must not be happen till materials are issued from store.
Waiting for reply!
Thanks!

HI
Check these BAdis for your requirement:
WORKORDER_GOODSMVT
RM_BFLUSH_GOODSMVT
also if working in REM then check REM profile for incorrect goods MVt in OSP2 and in Discrete check OPK4 with your oreder type for termination of incorrect goods MVt
Check and revert
Regards
Anupam Sharma

Need Help! have an issue from my auto response email, it showing the "MIME This is a multi-part message in MIME format. " and the signature message disappeared.

ave an issue from my auto response email, it showing the "MIME This is a multi-part message in MIME format. " and the signature message disappeared and replaced with some unreadable message

Hi msnyder1112,
Thank you for posting in MSDN forum.
Since this issue is related to the VB.NET, so we will move this case to VB forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT201342 Mail from time to time won't connect to my BT email. This is intermittent. There is no apparent reason, it just seems to not be able to connect occasionally. Is there an icloud issue from time to time?

Mail from time to time won't connect to my BT email. This is intermittent. There is no apparent reason, it just seems to not be able to connect occasionally. Is there an icloud issue from time to time?

Hi there racchycoops,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W.

Optimization of raw material while issuing from the stores

Dear Techies,
I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
I will explain this with an example.
Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
Is there any possibility in SAP that I can address this situation.
Thanks In advance,
With best regards,
Kiran.

Hello,
according to my knowlege it is not possible in SAP.
you have to create interface with Softwares like PRO-E sheet metal.
Regards
AM

Having bettery issue from last 2 weeks, It drains 50% bettery in half day with 20 mins talk time no app use except email., having bettery issue from last 2 weeks, It drains 50% bettery in half day with 20 mins talk time no app use except email.

Anyvoday having bettery issue from last 2 weeks? I am not sure what happend I have not installed any new app or not using phone constantly. My bettery use to last for almost 2 days with my regular use and not I have to charge it everyday. Let me know if anybody has solution.

Restore iPhone Firmware with iTunes on computer. At end when asked Set Up iPhone as New. See if battery issues are better. If still problem, all 4S have full Warranty, make Genius appointment, take iPhone to Apple. They can perform diagnostic test, if problem they will resolve it.

Issue from updating spry from 1.4 to 1.6.1

Similar Messages

Maybe you are looking for