Issue: Gesture back not working

So this is only a problem that I've recently encountered, and I'm not sure why it started happening or when exactly (besides within this past week, and I've had the phone since July).
Basically, the back gesture doesn't work anymore.  When I'm in the browser or an app like Messaging or Sounds & Ringtones, when I go into a screen (that normally you can go back to a previous screen from), it doesn't go back when I gesture it to anymore.  Instead, the screen slides left and then back into the original place without having gone back, it's still on the same screen/page.  I have been able to go back though, but this requires that I swipe back several times in rapid succession, but this is rather annoying and not how it should function.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

You've probably turned on "advanced gestures" in your Screen & Lock preferences. This makes the full "back" gesture switch between cards rather than go back. If you only have one card open it will just quickly shift a little and them pop back. If you have multiple cards open you can page left (or right) to get to the other cards.
If you swipe left starting at the middle button, then this will do a "back". Or you can turn off the advanced gestures and you'll get your original behavior. 

Similar Messages

  • The trackpad/gestures is not working correctly on mountain lion

    Hello,
    After I have downloaded Mountain Lion, my trackpad/gestures is not working correctly.  I cannot swipe with the three fingers, etc. and have to reboot and then it works, but will eventually not work over time.  Does anyone else have this problem?
    Thanks,
    Jeff

    I am having the same problem now.
    Was okay when first installed on date of Mountain Lion release.
    Now I have lost function in Spaces.
    Spaces would only work if I used Dock icon to move between Spaces.
    Now just run everything in one Space.

  • I  just upgraded my Macbook (late 2007) into X Lion , but the  multi touch gestures is not working. Is this not compatible with my Macbook?

    I just upgraded my Mackbook (late 2007) into X Lion , but the Multi Touch gestures is not working. Is this not compatible with my Macbook?

    jimmyfromdubai wrote:
    ... do I need to buy a new MAC office?
    A better solution is to try a number of better, free alternatives. Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    I use Apple's Pages ($19.99) as well as OpenOffice and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

  • HELP - Edge Animate issues - buttons/symbols not working/disappearing in portrait mode on mobile devices

    Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
    Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
    It's a regular issue of mine, particularly with complex animations. Symbols disappear
    - is it something to do with overflow?
    - responsive scaling?
    I have no idea.

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Help! Trackpad gestures are not working properly after Yosemite update

    So yesterday I updated my MBA to Yosemite. And since then I'm facing severe problems with my trackpad. Scroll and click gesture works as usual, but the other gestures suddenly stops working. I even checked my trackpad settings, but couldn't find any setting issues there. They won't just respond to any. Is it just me or everyone is facing such issues.

    worse than that, my MacBook Pro FREEZES when using 4 finger swipe on the built-in trackpad for App Expose after upgrade to 10.10.1
    Before 10.10.1 everything was working fine. Now, about one third of the time I use the 4 finger swipe the computer is dead (apparently mostly when using Numbers). I can still use the mouse but no response to clicks, keyboard, trackpad, or screaming out loud. All I can do is turn it off!
    This (in combination with Mail issues) is so bad that for the first time since using Mac I start thinking going back to PC...

  • Apple OSX 10.7 hand gestures do not work in Fire Fox 5.1

    I have upgraded my IMac to OSX 5.1(Lion) and I have upgraded Firefox to version 5.1. I have noticed that only some of the hand gestures that are provided for in Lion work in Fairefox. (They all seem to work in Safari) Is the next upgrade of Firefox going to fix this problem?

    Thank goodness some people are finally posting this issue.  I have several different Macs -- a Mac Mini, a Retina 15 Macbook Pro, 13 Macbook Air, and a 15 non-retina Macbook pro all running Mavericks.  I haven't had this problem of multitouch gestures not working but this is getting very problematic.  My two finger gestures continue to work, it's the three and four finger gestures that are not working -- especially the fullscreen switching.  That was one of the highlights of this OS release -- the multi-display fullscreen switching.  It works great until the computer falls asleep.  Hoping there is some type of easy fix.  Tried the general stuff, but it doesn't do anything for this problem.

  • New Problem, Old Issue. Ethernet not Working

    You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
    If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
    About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
    I tried turning the router off and then turning it back on, but none of that worked.
    Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
    Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
    Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

    Hello there Viafax and Spacedebris!
    Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
    The default setting it seems is "Auto Negotiation" which obviously wasnt working.
    I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
    So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
    The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
    But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

  • Same issue Network Discovery not working and Windows Update not working

    I've read the threads. 
    This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
    Everything was working before. I tried all of the recommended  services turning on restarting.
    Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
    I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
    I don't have the NetBIOS over tcp/ip in my services?
    I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
    FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
    Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
    Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients. 
    Thank You

    Hi,
    If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    What is System Restore?
    http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
    When you turn on network discovery, do you get any error prompt?
    Please check if you have any error message about network discovery in event viewer.
    Open Event Viewer
    http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
    What information appears in event logs (Event Viewer)?
    http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
    Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
    Also, please temporarily turn off your firewall and all the security programs for a test.
    As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness,  Remote Procedure Call (RPC), Function Discovery
    Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
    You should check again if you have started all these services.
    Regarding the update issue, I suggest you try the following suggestions.
    1. Temporarily disable firewall and antivirus program to test the issue.
    2. Open the Windows Update troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
    3. Reset Windows Update components
    http://support.microsoft.com/kb/971058
    You may follow the steps from the link below to fix the issue.
    Windows Update Not Working.
    http://support.microsoft.com/kb/555989
    You may also see the common Windows Updates troubleshooting guide.
    Fix Microsoft Windows Update Issues
    http://support.microsoft.com/kb/906602
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 4.3 Update - Car Stereo Issue, voice dialing not working with Bluetooth

    I've seen some similar issues reported, but they were for specific cars/stereos, and the symptoms were different, so I'm posting about mine:
    Phone: Samsung Galaxy SIII, Android 4.3.
    Car Stereo: Pioneer AVH-X2500BT
    This is a stereo I bought and installed myself. All of its features worked fine, and I was enjoying making calls using voice dialing via the stereo. Then, I installed the 4.3 update to the Galaxy SIII. Ever since (literally, I made a call that day before installing it, and tried shortly after), I cannot use the voice dialing feature. Any attempt to use voice dialing or voice commands via the car stereo will fail. Here's what happens:
    I do a long press on the car stereo's Home button to initiate voice dialing. On my phone, S-Voice starts up, and a Toast (little message) pops up briefly that says "Check in-car audio". When I talk, the little animation on the microphone button in S-Voice does not happen, meaning it's not hearing anything. The car stereo shortly cancels out of voice dialing mode, as though it timed out, or something.
    I've tried switching to Google voice, but the same thing happens. I've tried all kinds of configuration on both devices. I've unpaired and re-paired. Nothing.
    Also, turn-by turn directions from Google Maps appears to not work. The app thinks it's giving them, and when I turn the car off, the voice suddenly works from the phone, but it just won't come out the stereo.
    All other features work fine, including Pandora, and streaming Bluetooth audio. I can even make phone calls, by accessing the contacts and recent call list from the car stereo. The calls work and come through the stereo fine. Literally voice dialing and Google Maps are all that doesn't work.
    Does anyone know how to fix this?

        There could be any number of factors that may be affecting this, byounie. It may be that the firmware on your car stereo headunit may need to be updated. My direct recommendation to check first would be to access your bluetooth submenu, and next to paired info for the Pioneer AVH-X2500BT, you should see a little cog wheel/settings icon. Please select this, and start unselecting everything available there. Work your way up, and enable and test these different settings one by one, to see if there is a conflict between Google Maps and Voice dialing services. Let us know what happens, byounie.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Multi tasking gestures is not working

    I turned on multitasking gestures it did not work some times and also in some apps ex:newsstand (in iOS7.0.4)

    Newsstand is a weird kind of an app/folder and behaves a little differently than other apps. But for the other apps, if Multitasking gestures aren't working, try this first. Reset your iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that fails to help, go to Settings>General>Reset>Reset all Settings. You will have to enter all device settings again, but no data is lost.

  • Have macbook 13 inch, full trackpad yet gestures does not work with Lion

    Installed Lion, tried to use gestures but does not work, have macbook with full trackpad without bottoms, went to System Preferences, Trackpads, checked for all features, is there anything else I need to do?

    Check some features change others,and if you check someones doesn't work,check it and be sure you no asking do different things with the same gesture,happen to me too so i take the time to check uncheck what i check..

  • Calendar Issues - "Repitition is not working for the item you tried to access"

    I ran into an interesting error when troubleshooting a calendar issue today, wondering if anyone has seen it.
    Exchange 2010 SP2 latest RU, Outlook 2010
    User changes then start time for a recurring meeting, changes in everybody's calendar but hers 9still shows in her calednar as the original start time)
    Logged into OWA to see if her claendar reflected the correct start time there - no, still  shows the old start time.  So I open the meeting, have a quick look, and the following error pops up:
    "Repitition is not working for the item you tried to access.  It's possible either the start or end date are not correct"
    Has anyone seen this error in OWA before?
    TAG

    Hi,
    Please double check whether the updated start time and end time are changed properly in attendees’ calendar. Also confirm whether the updating message is in the organizer’s sent items both in OWA and Outlook.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • I hooked my ipod to my computer, went in to itunes and it was unable to commumicate saying i have to up date to 10.4.1 or something???  it has no updates available and ionternet was working and no updates available, other issues it is not working now..

    I have hooked up my sons ipod that is about a year old, seems like an iphone 3 style and received last christmas
    I tried to add songs on his ipod and it said that unable to perform as i had to update to 10.4.1 or somthing like that.  i tried to go to settings, updates and i said that all updates were completed and the latest was 6.3 or something like that6.1.1 ???
    anyway there was no update, and during having it hooked up, i tried to locate it with itunes and now it fails to swipe left or right on the screen,
    The off button on the top was not working since new.  also not sure why this happened but didn't return it as it was a gift and didn't have a receipt.
    i can get to settings, and only the first page, it won't scroill up or down, unable to turn off since new, and when swiping to turn on the picture in middle gets a square box around it and then it notices that my finger is on the swipe section and will attempt to open and after a few swipes it will open.
    it also appears like the buttons or screen has to be pushed twice to work, but sometimes you have to type or press your selection 5-10 times to have it respond???

    What model iPod
    Identifying iPod models
    http://support.apple.com/kb/HT1353What iOS version  (Settings>General>About>Version)
    What computer OS and version? I suspect a Mac with OSX 10,5,8
    Whart version of iTunes?
    A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
    iTunes 10.6.3
    To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later

  • File sharing with iMAC and OS 9.1 Power PC back-to-back not working

    Here's the setup. Any ideas on why it's not working?
    Internet ports connected with crossover cable.
    OS 9.1: File sharing ON, Program linking OFF, Document file selected for sharing
    OS 10.4.8: Personal file sharing ON, Built in Ethernet both computers, GO connect to server-Power PC IP address entered.
    Response after a timeout: "Connection failed. Check server name or IP address".
    17 iMAC Intel core duo   Mac OS X (10.4.8)  

    Still not working. Here’s what I tried.
    OS 9.1: Configured TCP/IP in Control Panel for connection via Ethernet slot. Noted IP address from last DHCP connection. Turned on File Sharing in Control Panel. Selected file for sharing. In Chooser clicked Appleshare icon and Server IP Address button. (Note: Appletalk button active). Entered iMAC IP address in Server Address screen and clicked Connect.
    No connection made.
    Then opened Appletalk in Control Panel and noted it is connected via same Ethernet slot as TCP/IP. Therefore returned to Chooser, clicked Appleshare icon and clicked Appletalk inactive button. Upon turning File Sharing on in Control Panel, get warning message, “Appletalk must be turned on to use file sharing.”
    As before, iMAC connect to OS 9.1 didn’t work either.
    Artnum=302784 indicates Appletalk cannot be used, TCP/IP must. Apparently there is no way to disable Appletalk in OS 9.1 maching when file sharing.
    It appears I’ve hit a dead end in trying to get operational file sharing between OS 10.8.4 and OS 9.1 machines.
    Thanks for your help, BDAqua
    17 iMAC Intel core duo   Mac OS X (10.4.8)  

  • My swipe finger gesture is not working???

    My swipe finger gesture doesn't work after my Macbook pro wakes up from sleep. I recently updated to new mountain Lion paying £20 :-( . Please help.

    check to see if you turned it off System Preferences-> Trackpad -> More Gestures.

Maybe you are looking for

  • Where can i get the position numbers and postion text' ot pernr's

    now i am getting position number from pa0001.., so if want to take that position text  where can i get that informaiton .. i mean which table having that positoin and their text.. can  anybody tel me... Moderator message: please search for available

  • EBS 12.1.3 & OCM: few questions

    Hi, I would need some clarification when using Oracle Configuration Manager (OCM) with EBS 12.1.3. I have multi-node (app node + db node in separate servers) EBS 12.1.3 environment where I've configured OCM as follows. Installed OCM (setupCCR) and ex

  • Financial Reporting Studio: Query returns number instead of text !?

    Hi All, I have built a CAPEX report for a client querying new asset requests. Report is completed with no errors, however the problem is that the values returned for members of type text such as 'Asset Description', 'Justification'...etc are numbers

  • Can the Apple TV support more multiple remote apps?

    We just got a new Apple TV and would like to use two different iPhones using different ITunes accounts to control the device through the remote app.  Is is possible?

  • To cancel the provisions generated and seen in MD04 transaction.

    Hi, I have an issue regarding the cancellation of reservations. This is related to sub contract order. In the order provisions are created for the material in the system. The provision no. is seen in transaction MD04. These provisions are for the chi