Issue in 2013

Hi,
I have set max numb of leaves in the Generation rules as 48 days.
I am using 2013 infotype to upload last year quota." ONly transfer quota correctionimmediately " is the option that i selected ,as i gave 01.01.2007 date to upload the quota....
Problem is:-
if emplyee has 46 days last year, after Jan,it becomes 48 days..(2 days per month).in Feb he takes 2 days leave.
Now, 48-2 = 46, and add 2 days momthly quota -
>final should be 48 days.
It is not happening.System shows only 46 days by March end....
Why system is not adding once it reaches 48????should i change in 2013 options..i checked them all..no use.
The AWKONTI table in my TQTA schema shows as 48 days,but why in PT50 it has only 46 days???
Plz help.it is very very very urgent.
regads
Sai
null

Hi Rammanohar,
even after July 1st also it is showing the same....
does TQTA consider accruals even after the max limit reaches...as i give absences, the system is not adding after 48 days...
final output is 48-leave days.
i want 48-2 days leave = 46 + accruals of march,april etc = again 48...which is not happening.
regds
sai

Similar Messages

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

WIFI issues with 2013 MBA

Hi
I would be most grateful for help with the following - I recently purchased a 2013 MBA (latest model) but have been having issues with the wifi speed. My broadband normally runs at 6-7Mbps (which I check regulary) but my MBA can only be described as slow when browsing simple web pages (the other pc's in the house don't have the same issues). I have checked the transfer rate on my WIFI in Network Utility and it sits at 144 Mbit/s so I am not entirly sure where the problems lies and why it is only affecting my MBA. I have tried switching channels but it has not helped. I am aware that recent MBA have issues with WIFI but not sure if these problems are related.
Thanks
Tim

Hello tim0409
Check out the articles below to ensure that the router is setup with the recommended settings and other troubleshooting steps to sort you out.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Unable to Open Project Site Access Denied Issue Project 2013

This issue is happening to select projects and select project managers, they can view certain project sites but receive the error on other projects. After some extensive testing
it looks like if the PM is the owner of the project plan they are not getting added to any of the synced groups for the project site. I can change the project owner to any another PM and it processes correctly and adds them to the PM synced group on
the Project site. As soon as I make the original PM the Project plan owner again the previous PM gets removed from the PM synced group and added to the Team member synced group, the way its supposed to work. However the PM with the problem never
gets added to any group. I have to manually add them to the non-synced Owner group on the project site so they don't get removed from the synced PM group the next time the sync runs at midnight.
As I stated it is happening on select project plans and select PMs. I have tried replublishing the project plan via Project professional and the web and the results are the same.
If I create a new project plan and assign one of the PMs with the issue to the plan everything works correctly. We noticed the issue a few weeks ago; most of the plans with the issue are several months to a year old so they were working correctly until
recently. They had also made PM owner changes prior to the issue on most of those plans and everything worked correctly.
If anyone is experiencing this issue and has a fix please let me know. I am trying not to open an MS support ticket if possible.
Frank Miranda Florida Hospital MIS

I believe I've found the fix for this issue. After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014.
To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end) I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments. I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released. He was adamant that this would not resolve
our issue and he requested or production databases because he was unable to replicate the issue in his test environment. The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously! His farm had the most current
CU which included the hotfixes from July and August. Apparently he didn't see the flaw in his logic.
I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue. I learned a long time ago to take MS support comments as suggestions instead
of gospel truth, this isn't the first time they have confidently given me erroneous information.
We are currently doing further testing to verify that this CU didn't break something else. Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix. I'll save you the trouble and list them below.
Watch the
September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
August 2014 CU https://support.microsoft.com/kb/2989078
August Project site sync hotfix
https://support2.microsoft.com/kb/2883083
July 2014 CU http://support.microsoft.com/kb/2882990
July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
Microsoft Project Server Blog
http://blogs.technet.com/b/projectsupport/ (I find this to be more helpful than the TechNet site)
Frank Miranda Florida Hospital MIS

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

POP3 Adapter Issues Biztalk 2013

Hey Guys,
I'm going through a very strange situation.
First my environment:
QA Windows 2008 R2 Standard
Biztalk Server 2013 Enterprise
2GB of Memory
Biztalk and SQL Server 2008 R2 installed in a same virtual server.
Pre-Production Windows 2008 R2 Enterprise
Biztalk Server 2013 Enterprise
4GB of Memory
SQL Server 2008 R2 installed in another virtual server with 4 GB memory.
So, POP3 not working in Pre-Production environment. Its simple not search the emails on pop3 server.
And what I feel unconfortable that in Event Viewer haven't any log about POP3 adapter.
My URI for test, POP3://lkjaldskjlkasd#domain\user. You can see that POP3 server not exists, and still the adapter did not log on Event Viewer about that.
I'm sure the Host Instance has been properly started.
Its seems there is no difference receive port is on or off.
In QA environment the adapter is working very well.
Any Ideas? Tks in advise.
Espero ter ajudado
Ruth Resende
MVP, MCTS - Biztalk Server
www.biztalkbrasil.com.br
Twitter: @ruthresende

Hi Ruth ,
I had a similar issue , but with different adapter (SFTP ). everything was started , host, rcv location and not even the event viewer shoes error or warnings, I proceed to create the another rcv location with the same configuration and then start to work.
I found out this pretty weird and I thought that was something to do in the bindings that were imported or with the SFTP adapter. but when I extract the binding I figure it out that another developer added an schedule settings to run everyday at 11 pm
for 20 min and she completely forgot to mention this when I remove this it started to work just fine.
maybe you had a similar issue . let me know if you figure out your issue.

Multicasting Issues - MDT 2013 - Server 2012 R2

Hello!
I'm having some issues with multicasting on a large university network. Our setup is like this:
WDS role setup on VM with Server 2012 R2
Deployment shares hosted on the same VM - Using MDT 2013 to manage Deployment Shares
VM is on a different VLAN from client computers. - IP Helpers to connect between the VLANs
Multicast namespace was created successfully.
All switches between server and client are managed, IGMPv3 compatible, and have snooping enabled3
MDT Images are custom WIMs, with no setup files
When I run a deployment on any number of clients, I get the message saying "Attempting multicast transfer". The clients show up listed in the WDS Multicast Transmission. Then the clients drop off the server, and begin unicasting. Unicast speeds
are excellent. Our 10GB images copy in about 10 mins. But we plan to do 30-40 systems at a time, and I believe that could cause some issues with so many individual sessions running...
I've noticed under our network adapter properties that Microsoft Network Adapter Multiplexor Protocol is unchecked. Not sure if that is related?
I have copied multicast information from the BDD.log file on one of the failed clients. That can be found below.
Any help/advice will be greatly appreciated! Thank you!
Edit: I likely posted this to the wrong place. I have reposted this to the MDT forum. Thanks!
<![LOG[LTI applying image \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim using ImageX]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim using ImageX]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Windows 7 (x64) - Vers 4]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 504)]LOG]!><time="14:42:33.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 504)]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 504)]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Windows Deployment Services Multicast Client [Version 6.3.9600.17237]
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (c) Microsoft Corporation. All rights reserved.
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:42:34.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x800705B4].
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Operation Failed. [0x800705B4].
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > This operation returned because the timeout period expired.
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = -2147023436]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer could not be completed, rc = -2147023436, falling back to using \\BRYANTWDS-SERV1\CopyToDrives$\Operating Systems\Windows 7 (x64) - Vers 4\Windows 7 (x64) - 4.0.wim]LOG]!><time="14:43:04.000+000" date="02-04-2015" component="LTIApply" context="" type="1" thread="" file="LTIApply">

Hi Kyle T.Johnson,
Could you try to put a test client to your WDS server VLAN then monitor this issue again.
Best Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

POP/IMAP issue Exchange 2013

Hi,
I have started the migration of Exchange 2010 to Exchange 2013. Exchange 2010 is single server with all roles and Exchange 2013 with 1 CAS and 1 Mailbox. Initially plan was to verify the Windows XP users can connect with Exchange 2013 but there was a lot
of issues and stop XP machines migration. Windows 7 machines are working perfectly without any issue.
Now decided to configure POP/IMAP on XP machines. The test of incoming POP/IMAP is fine and receiving emails from internal to external domains but the SMTP is giving error
Send test e-mail: Your server does not support the connection encryption type specified. Try changing the encryption method. Contact the administrator of the mail server or Internet service provider for further assistance.
Can some guide what I am missing during the configuration.
Thanks

Following is the   Get-ExchangeCertificate | fl
AccessRules        :
CertificateDomains : {mailboxserver, mailboxserver.domain.local}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=mailboxserver
NotAfter           : 1/22/2020 7:53:11 PM
NotBefore          : 1/22/2015 7:53:11 PM
PublicKeySize      : 2048
RootCAType         : Registry
SerialNumber       : 434974nb7347497449794732
Services           : IMAP, POP, IIS, SMTP
Status             : Valid
Subject            : CN=mailboxserver
Thumbprint         : 434974nb7347497449794732
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=Microsoft Exchange Server Auth Certificate
NotAfter           : 12/27/2019 6:52:43 PM
NotBefore          : 1/22/2015 6:52:43 PM
PublicKeySize      : 2048
RootCAType         : None
SerialNumber       : 434974nb7347497449794732
Services           : SMTP
Status             : Valid
Subject            : CN=Microsoft Exchange Server Auth Certificate
Thumbprint         : 434974nb7347497449794732
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {WMSvc-mailboxserver}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=WMSvc-mailboxserver
NotAfter           : 1/4/2025 4:48:16 PM
NotBefore          : 1/7/2015 4:48:16 PM
PublicKeySize      : 2048
RootCAType         : Registry
SerialNumber       : 434974nb7347497449794732
Services           : None
Status             : Valid
Thanks

Office Web Apps Farm Connection Issue SharePoint 2013

I have servers owa1 and owa2. Owa1 is acting as host and owa2 I joined to office web apps farm that’s is to owa1.
Both these are in office web apps farm and load balanced. Now my question is: From SharePoint Server when I connect , how should i connect while execute PowerShell command in SP server, in the syntax
–servername parameter what should I specify do I need to specify the FQDN of the server name or host name (officewebapps.jdax.corp.local, this is host record created in DNS by mapping to VIP Of the load balancer (owa1 and owa2).
Please help me.
Thanks, Ram Ch

You need to use URL officewebapps for parameter InternalURL
ew-OfficeWebAppsFarm [-AllowCEIP <SwitchParameter>] [-AllowHttp <SwitchParameter>] [-AllowHttpSecureStoreConnections <SwitchParameter>] [-CacheLocation <String>] [-CacheSizeInGB <Nullable>] [-CertificateName <String>] [-ClipartEnabled <SwitchParameter>] [-Confirm [<SwitchParameter>]] [-DocumentInfoCacheSize <Nullable>] [-EditingEnabled <SwitchParameter>] [-ExcelAllowExternalData <SwitchParameter>] [-ExcelConnectionLifetime <Nullable>] [-ExcelExternalDataCacheLifetime <Nullable>] [-ExcelPrivateBytesMax <Nullable>] [-ExcelRequestDurationMax <Nullable>] [-ExcelSessionTimeout <Nullable>] [-ExcelWarnOnDataRefresh <SwitchParameter>] [-ExcelWorkbookSizeMax <Nullable>] [-ExternalURL <String>] [-FarmOU <String>] [-Force <SwitchParameter>] [-InternalURL <String>] [-LogLocation <String>] [-LogRetentionInDays <Nullable>] [-LogVerbosity <String>] [-MaxMemoryCacheSizeInMB <Nullable>] [-MaxTranslationCharacterCount <Nullable>] [-OpenFromUncEnabled <SwitchParameter>] [-OpenFromUrlEnabled <SwitchParameter>] [-OpenFromUrlThrottlingEnabled <SwitchParameter>] [-PicturePasteDisabled <SwitchParameter>] [-Proxy <String>] [-RecycleActiveProcessCount <Nullable>] [-RemovePersonalInformationFromLogs <SwitchParameter>] [-RenderingLocalCacheLocation <String>] [-SSLOffloaded <SwitchParameter>] [-TranslationEnabled <SwitchParameter>] [-TranslationServiceAddress <String>] [-TranslationServiceAppId <String>] [-WhatIf [<SwitchParameter>]]
Hope below article should help you in detail:
http://blogs.technet.com/b/jenstr/archive/2013/03/18/creating-an-office-web-apps-server-2013-farm-with-2-machines.aspx

Windows 8.1 drivers issue, late 2013 iMac, 27 inch

Hello! I am having the hardest time trying to install windows 8.1 on my imac. I have the USB drive in the right format, I have the windows install disc in, and everything works up until it resets into the windows installer. Once I get to this point, I get the error message "No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK".

There are newer drivers available for your machine.
If it's a "late 2013" then the newer drivers are available here
http://support.apple.com/kb/DL1720
I would download them to your Mac (or to a FAT32 formatted USB) then try those either directly from the USB or by copying them to your Windows installation first.
It will take some time - if I remember correctly the file is 1.35GB in size!

Tagged items web part issue SP 2013

Hi,
we have configured Content tag cloud and we have two different issues.
1. we have configured to show the tags that are tagged under the current url by all users, but when we click on the tag, it shows all the documents that are tagged with that specific tag (from different sites), is this a known behavior.
2. For many of the tags, we don't see the documents in the Tagged items web part (some only shows in popular within 60 days tab but not in All tab)
We have run the full crawl and social maintenance timer job to fix some other issues earlier. I also read somewhere that we need to activate the content type syndication hub, but we already have many tags working fine. what is the relation to the content
type syndication hub.
Any help would be really appreciated. Thanks.

Hi Senthil,
#1. Yes. If we click a tag in the Tag Cloud web part, it will redirect use to the tag profile page for this tag.
And all the items tagged by the tag will be displayed in this tag profile page.
#2. This issue may be due to the incremental crawl miss some tagged items or tags.
I recommend to run a full crawl and then check the results.
Per my knowledge, it has nothing to do with the content type syndication hub.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

"Property Mapping for Synchronization" User profile export to AD issue - Sharepoint 2013

Trying to map user properties to AD Mapped Attributes.
I map the property "SPS-JobTitle" to AD Attribute "title" with direction "export" click add and then ok to save and everything is fine, I then Map "WorkPhone" with Ad Property "telephoneNumber" with direction
"Export" and click add then ok and now property mapping on both "SPS-JobTitle" and "WorkPhone" show two mappings.
If i go into the propertied it will show two mappings under "Property Mapping for Synchronization" both the title and work phone mappings.
If i remove it from one it removes from both
flavio

It´s a bug in Sharpoint 2013, confirmed by MS.
I reported it in January but its still not fixed :(
The bug can be reproduced just as you mention by enabling export on several AD properties, the property will get duplicated on the previous propery you enabled export on.
This makes it impossible to use the AD export functionality in Sharepoint 2013 until the bug is fixed.
karl

Page Break Issue - Excel 2013

I'm about to explode, trying to figure out why this problem is happening. I have two users who are opening
an Excel file from the same location, and they're doing their own modifications/saves. When one user opens the document and prints, the Print Preview shows 12 pages, and there are no problems. When the other user opens the same file and prints, there are 18
pages.
Throughout those 18 pages, there are several blank pages interspersed with populated ones, and there are also
a couple of pages with one line or so, from the end of a previous page. If I go to View>>Page Break Preview, this extended document shows little slivers of extra pages. The top of those little "pages" are dashed, and the bottom line is the
solid page-break, for the next page.
Why would this be happening to one user, but not the other? They're both opening the exact same page/template.
Oh, and as a side note, I'm also getting 18 pages with blanks/single-lines, when I open the file. Is there an advanced setting that the 12-page user has checked in Excel that I'm missing? Am I providing enough information?
Any help is massively appreciated.
- Thanks

It's probably caused by a difference in printers. Excel uses the printer settings to place page breaks
Some printers, e.g. inkjet printers, have a smaller printable area than others, e.g. laser printers. As a result, less information will fit on a page.
The worksheet apparently also has manually set page breaks.
Let's take a simple example: the used area of the worksheet has 94 used rows, and a manual page break has been set below row 47. I'll assume that the used area is rather narrow.
On printer A, 48 rows fit on a page. So the first 47 rows will be printed on page 1, and the next 47 rows on page 2.
On printer B, only 46 rows fit on a page because it has a smaller printable area. So the first 46 rows will be printed on page 1, the 47th row on page 2 (not more, because there is a manual page break below row 47). The next 46 rows will be printed on page
3, and the 94th and last row on page 4.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

MS Office 2013 crashes no matter what I've tried. Been going on for a year HELP!!!

I have been having an issue with Excel 2013 crashing for over a year now, I place post after post after post, I have spoken to
numerous times, escalated 6 times and finally spoke to a person who wants money to fix THEIR ISSUE!!!!! What a way to treat your customers.....needless to say , after being in the phone this last time for 2 1/2 hours I did not pay him a dime.
Microsoft KNOWS they have an issue with 2013 crashing. I am so so SO upset, another FULL day on the phone with Toshiba and Microsoft , I mean since 8:00 a.m. AGAIN this morning and still NO RESOLUTION.
When I do a simple cut and paste of ONE CELL, it crashes. OMG, how ridiculous is this. It may work for a week and then forget it, it will crash for a week I can not get ay work done like this. Perhaps another
is the way to go if they cant resolve THEIR issue
Is there ANYONE that has the knowledge to help to fix this? If not, IMHO....Microsoft needs to STOP selling
. At least, get it right, get out all the bugs before you let us determine if it works or not. I have brought it up in safe mode, I have repaired, I have reloaded video drivers, I have taken off all 3rd party software, deleted all *.exd files
to name a few things. Here are some of the event views
Log Name: Application
Source: Application Error
Date: 1/30/2015 10:58:04 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Larry
Description:
Faulting application name: EXCEL.EXE, version: 15.0.4675.1001, time stamp: 0x546b4f33
Faulting module name: VBE7.DLL, version: 0.0.0.0, time stamp: 0x5339bedf
Exception code: 0xc0000005
Fault offset: 0x00000000000b8419
Faulting process id: 0x1d5c
Faulting application start time: 0x01d03c862e9a7156
Faulting application path: C:\
Files\
15\Root\Office15\EXCEL.EXE
Faulting module path: C:\Program Files\Common Files\Microsoft Shared\VBA\VBA7.1\VBE7.DLL
Report Id: 27509c44-a8a1-11e4-bf03-b888e31e9527
Faulting package full name:
Faulting package-relative application ID:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-23T10:14:23.035567100Z" />
<EventRecordID>1201188</EventRecordID>
<Correlation />
<Execution ProcessID="764" ThreadID="6844" />
<Channel>System</Channel>
<>Larry</Computer>
<
UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="AlertDesc">40</Data>
<Data Name="ErrorState">107</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36874</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-23T10:14:23.043571600Z" />
<EventRecordID>1201189</EventRecordID>
<Correlation />
<Execution ProcessID="764" ThreadID="6844" />
<Channel>System</Channel>
<Computer>Larry</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="Protocol">TLS 1.0</Data>
</EventData>
</Event>
xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-23T10:14:23.043571600Z" />
<EventRecordID>1201190</EventRecordID>
<Correlation />
<Execution ProcessID="764" ThreadID="6844" />
<Channel>System</Channel>
<Computer>Larry</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="AlertDesc">40</Data>
<Data Name="ErrorState">107</Data>
</EventData>
</Event>
Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1501</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-23T12:13:14.235195500Z" />
<EventRecordID>1201194</EventRecordID>
<Correlation ActivityID="{DC67441C-F0EB-47CB-B169-BD98023BF930}" />
<Execution ProcessID="344" ThreadID="12048" />
<Channel>System</Channel>
<Computer>Larry</Computer>
<Security UserID="S-1-5-21-71391616-1131922306-3719273214-1006" />
</System>
- <EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">3664</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">266</Data>
<Data Name="DCName" />
</EventData>
</Event>
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-23T12:46:22.244167500Z" />
<EventRecordID>1201250</EventRecordID>
<Correlation />
<Execution ProcessID="764" ThreadID="9456" />
<Channel>System</Channel>
<Computer>Larry</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="AlertDesc">20</Data>
<Data Name="ErrorState">960</Data>
</EventData>
</Event>

I noticed the Faulting module VBE7.DLL in your logs, definitely you were using VBA in Excel.
Well, does the issue occur if working without VBA?
For this VBE7.DLL issue, I have two suggestions:
Method1 - Recompile the Project
1. Open the workbook in Excel. Normally Excel will disable macros in a worksheet until you click a button to enable the macros. Do not enable the macros just yet.
2. Open the VBA editor. You can hit ALT+F11 or on the ribbon click Developer > Visual Basic
3. In the VBA editor double click your module or first module that contains your project. Add a commented line of code such as:
‘ This is a comment
Then click on the Debug menu at the top and click Compile VBA Project.
Repeat this step for each module in your workbook and then save the workbook.
4. Close the workbook and re-open it and enable the macros and test it.
Method 2 - Disable Compile on Demand
In the VBE Editor in Excel, click on Tools > Options > General tab and click to uncheck
“Compile on Demand”.
Alternatively you can set the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\VBA\7.0\Common
Type: DWORD
Name: CompileOnDemand
Value: 0
-Jeff

Issue in 2013

Similar Messages

Maybe you are looking for