Issue in accessing transaction OBYA

Hi All,
I am trying to execute the transaction OBYA in quality system, having SAP_ALL & SAP_NEW Authorizations.
Encountering message with only display access.
Is ther some setting to be checked. Kindly assist me.
Regards,
Bhaskar.T

Hi Bruno,
Our Production and quality are having same setting in SCC4. however does the client role "TEST" & " PRODUCTION" has deviation for this.
Regards,
Bhaskar.T

Similar Messages

Issue when accessing standard LM transactions via ITS

Hi,
We are implementing WM using ITS Mobile.
We have developed certain custom screens and also used standard transactions such as LM02 and LM04.We have created a internet service for transaction LM01 and published all our custom and standard screens within the service.
When testing the transactions in R/3 using LM01 transaction..there were no issue...
But when testing the same in ITS....once we enter into a standard transaction like LM02(By clicking the corresponding menu entry) and click on Back button...it must bring me back to my menu( transaction LM01)...instead...my ITS session gets logged off...displaying message...'You have been logged off from SAP NetWeaver Application Server'.
We are facing the same issue when we try to access standard LM transactions via ITS...
I tried to analyze by debugging from ITS....but the flow of R/3 and ITS remains the same...
These are my service parameters..
~THEME     99
~SINGLETRANSACTION     1
~ITSMOBILE     1
~TRANSACTION          LM01
~SOURCES     ZWM_MENU,itsmobile
~GENERATEDYNPRO     1
~POPUPS     1
Did any of you face a similar kind of issue when accessing standard LM transactions in ITS ?
Kindly Suggest.
Regards,
Thyagu.
Edited by: Thyagu Natarajan on Jan 25, 2011 1:00 PM

Hello,
I am also trying to implement WM using ISTMobile, but i have a little problem... when i am in my local network the service works and calls the page in the browser, but when i am in other network it gives me "Could not connect to remote server" (off course).
I undertand that i can´t access my server through other networks... but can anyone tell me if i it is possible to access SAP ITSMobile transactions through the internet?? Is the solution create a VPN network to my local network or something like that?
Thanks a lot.

Performance issues while accessing the Confirm/Goods Services' transaction

Hello
We are using SRM 4.0 , through Enterprise Portal 7.0.
Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
The system simply clocks and would never show the screen.
This problem occurs for some users all the time, and some users for some time.
It's not related to the User's machine as others are able to access it fast using the same machine.
It is also not dependent on the data size (i.e.no . of confirmations created by the user).
We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
Any directions for finding the Probable cause will be highly rewarded.
Thanks
Kedar

Hi Kedar,
Please go through the following OSS Notes:
Note 610805 - Performance problems in goods receipt
Note 885409 - BBPCF02: The search for confirmation and roles is slow
Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
Thanks,
Pradeep

Accessing Transaction iview as a part of BPM workflow

Hi,
We have a requirement where a 6 level BPM process is being created. As a part of this process, we need to access transaction iview. On the screen where transaction iview should appear, we also need to show a web dynpro java "submit" button. On click of this button, the workflow should move to next level. Since, through BPM we cannot directly access the PCD objects, we have created a transaction iview, and a web dynpro application carrying the submit button. Both of them have been nested into a page. We have created another base DC which calls this portal page in the init method. The base DC is integrated in the workflow. When we try to open it through the UWL task, we are facing two issues:
1. a blank window opens first, and then the page window opens. This is because the property is set to show_external while calling the page. But, if we change the property to in_place and click on the task in the UWL, the portal page does not open. A blank scfreen is displayed with standard UWL buttons for "Close" etc.
2. If we open the page with the property set to show_external itself, then on click of submit button, though we are firing the complete event (which is created in the base DC, and called in the second DC through a method), it does not work.
Can anyone please help in this regard?
Thanks & regards,
Anupreet

Hi Anupreet,
Item 2:
Is the window the contains the button opened inside the portal iview or in the application that calls the portal ui?
In the first case the problem is that the event you are firing can not be caught by the BPM framework because the application is not run inside the context of the bpem application, so the event is not caught by BPM and nothing happens. You may wat to consider using portal eventing in conjuction with your application and try and catch the event in the application started by the BPM process and then firing the event again but inside the bpm application context.
Regards,
Christiaan

Greetings,Currently I am having a big issue to access the "Shop section(tab)" of the website.

Greetings!
I need assistance from you wonderful mac techies out there.
Currently I am having a big issue to access a website's "SHOP section(tab)" within this website.
While in the process of paying for my items in my cart, I received a website message saying something
To the affect that this website is being updated. Your items in your cart will be in your cart.
Then the website's screen kicked me out the door.
A few days later I accessed the main page of this website with no problem.
I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
I click and maneuver from on one tab to another from the main page within this website with no issues.
When I click on the "SHOP section(tab)" within this website to complete my purchase.
Part of this website an error occurs on this "SHOP tab".
"Safari can't connect to the server".
Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
I click on the reload from the view of the toolbar and I can't access this website's "Shop section(tab) at all.
I e-mailed the webmaster of this website a few times, but no response.
In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
Now I am at my wits end as I really need to complete my purchase from this website.
I cannot purchase these items from other websites. Only this website. Good Grief( :
I am at my wits end as I really need to complete my purchase with this particular website.
So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
I can't figure this out (:
No issues with:
* My modem and ethernet connections
* My network provider connection
* Cables and wires
* Power strip unit to protect my electronics.
* Utility bill is up to date.
I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
 Lion: OS X
 Version 10.8.2
 Processor: 2.7 GHz Intel Core i5
 Memory: 8 GB 1600 MHz DDR3
I use Safari: Version 6.0.2 (8536.26.17)
I use the Mail app that shows a postage stamp with the picture of an eagle
 It is the Version 6.2 (1499)
I really need help access the "Shop section(tab)" of the website to complete my purchase.
What is the next step to fix my dilemma?
Thank-you all in advance with your expertise, and patience.
Very Much Appreciated.
With Kindest Regards

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

ST03N shows users accessing transactions even when not logged in

Hello all...
We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this.
We get the information fine, but it shows non-system users as having accessed transactions on days they are not logged in or it shows excessive use of a transaction (i.e 8000 times in a 20 day period).
We have confirmed that no batch jobs or system jobs are running or have run under their ID's. Additionally, it shows use of transactions which the users are not authorized to use.
Please help as we are trying to explain this for SOX purposes.
Cheers all!
Joe Johnson

Thanks for the replies...
We can use AL08, but it doesn't show any user activity for the specific users that keep popping up in ST03N.
RFC calls seem to be closest to explaining this, but how can one track the calls made by a user? Additionally, if the ID is not authorized to perform a transaction shouldn't the RFC call fail?

Issue in Accessing OAF Page in Oracle Apps

I am facing a strange issue while accessing OAF pages from a responsibility. I have a OAF page which is attached to a responsibility through a menu-function. When I click the menu, it opens the page in a new window properly, but if I click the menu again it opens the page ontop of the existing page (which was opened previously). Is there any setup in IE to fix this? Ideally the page should be opened in a new window everytime I click the menu.
Any pointers on this would be appreciated.
Thanks,
Shree

If all of the users are using the same responsibility and the issue happens only for some users, you can determine what profile options have been set for the user for which this works by using scripts in MOS Docs 367926.1 (How To Find All Users With A Particular Profile Option Set?) and 282382.1 (How to Search all of the Profile Options for a Specific Value). You may need to modify these scripts to suit your needs.
HTH
Srini

Need help on accessing transaction?

Hi,
I am doing an SOD audit and come across one role where the user is given authorization to ME21N (create purchase order) for example in auth object S_TCODE.
But he has been given display (and not create) authorization in Document Type in Purchase Order.
So I would like to know whether user still can access transaction ME21N and create purchase order?
Thx.

HI:
The user should NOT be able to fully execute ME21N without additional "create" authorizations for the object "Document Type in Purchase Order" (M_BEST_BSA) as this is usually the first object checked in standard execution of this transaction code. He might be able to get into the first screen of ME21N without an authorization error...but he will not be able to save anything.
If the intent was to allow user to display PO's only...then they should use ME23 or ME23N.
If the user has display (03) access for doc type NB, and create (01) authorization for doc type XX, then the user would be able to use ME21N to create PO of doc type XX, but not NB. Check the role to validate that there isn't multiple authorizations...and you might also want to run a report to see if the user has an authorization for the object M_BEST_BSA through another role...since it doesn't matter where this authorization came from (ie: whether it is in the same role as ME21N or not), but rather he "steals" it from another role assigned to him as well.
You can fully prove this by running an authorization trace and you will see that this object is required to have activity 01 of certain doc type in order to "save" the newly created PO.
Margaret

Problem with accessing Transaction iViews through ITS

Hi,
I am trying to access Transaction iViews through ITS, we are getting sap easy access menu instead of transaction which we had given during the configuration. Recently we have upgraded ITS 6.20 to Patch level 19. Before applying patch everything was working fine.
Anyone please help me in solving this problem as it is very urgent.
Thanks,
Susan.

hi all
thanks for the hints. But last but no least we found the the problem. it was an flag in the config file of the its.
regards
pascal

2 issues with call transaction to LS24

Hello All,
There are 2 issues with call transaction to LS24.
1) It doesn't take batch value and displays stock for all batches.
2) When you go back, it doesn't go back to the calling program.
Any thoughts ?
Here is my code:
PARAMETERS: p_lgnum TYPE lgnum,
 p_matnr TYPE matnr,
 p_werks TYPE werks_d,
 p_lgort TYPE lgort_d,
 p_charg TYPE charg_d.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM display_stock_per_batch.
*& Form DISPLAY_STOCK_PER_BATCH
FORM display_stock_per_batch .
SET PARAMETER ID 'LGN' FIELD p_lgnum.
SET PARAMETER ID 'MAT' FIELD p_matnr.
SET PARAMETER ID 'WRK' FIELD p_werks.
SET PARAMETER ID 'LAG' FIELD p_lgort.
SET PARAMETER ID 'CHA' FIELD p_charg.
CALL TRANSACTION 'LS24' AND SKIP FIRST SCREEN.
ENDFORM. " DISPLAY_STOCK_PER_BATCH

hello
use this code
perform bdc_dynpro using 'SAPML01S' '0209'.
perform bdc_field using 'BDC_CURSOR'
 'RL01S-CHARG'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RL01S-LGNUM'
 p_lgnum.
perform bdc_field using 'RL01S-MATNR'
 p_matnr.
perform bdc_field using 'RL01S-WERKS'
 p_werks.
perform bdc_field using 'RL01S-LGORT'
 p_lgort.
perform bdc_field using 'RL01S-BESTQ'
perform bdc_field using 'RL01S-SOBKZ'
perform bdc_field using 'RL01S-CHARG'
 p_charg.
perform bdc_dynpro using 'SAPML01S' '0209'.
perform bdc_field using 'BDC_OKCODE'
 '/EBACK'.
perform bdc_field using 'BDC_CURSOR'
 'RL01S-LGNUM'.
perform bdc_transaction using 'LS24'.
may be it will help u

Access transaction cv03n via ITS

Dear friends,
I"m working on ECC6 by ITS and trying to access transaction cv01n/cv02n/cv03n.
The ITS system get into spin and stuck because the GuiSapInfo.class not found.
Recently i realized that putting a JAVA software in the station can solve this problem.
Does any body know if JAVA software is truly required to run the application like this?
IF not, what are the exact requirements of the user Browser Internet explorer?
best regards,
avi koren

Hi,
You can define an ITS service, using SICF transaction. This service should have next parameters:
~transaction = CV03N
~webgui = 1
~generatedynpro = 1
Then, active your service and test it.
Hope this helps,
Iván.

Issues with accessing HD on Time Capsule

I have a Windows 7 32 bit machine that I just built. I have a Windows XP system and a Mac Book Pro running Snow leopard. My XP and Mac are able to access the HD of my Time Capsule. My Windows 7 is having issues logging into the Time Capsule HD. When trying to log into the base station using the Airport Base Station Utility I get a message stating "Unknown user, incorrect password, or login is disabled. Please retypre the login information or contact the disk's administrator (86)." I have the AirPort Utility installed on my Windows 7 and am able to log into the settings to modify the settings of the Time Capsule. Does anyone have any insight as to how to assist me?

Note: Mac 3 had a single user on it, my son. He was the admin. I created a new non-admin acct and moved all his stuff there (Not sure I did it the right way so it took a long time.). Now I am admin on that Mac. Not sure if that is relevant here (leading to the problem identified above) but thought I would mention it.
Thanks in advance for your help.
The fact that you cannot access the backup now only on this Mac does suggest this is part of the issue. Did you do this before or after the issue with access?
Permissions can be pretty tricky things.. certainly to do backups or to retrieve them from an existing backup created with different user permissions might be a mess.. Pondini is perhaps the only one who can tell you the ins and outs of that.
On the more general note.. lots of people are having issues with USB drive on the TC from Lion.. for many it stops working forever the moment the disk spins down from a reboot.. making it useless.
But it is dog slow for everyone.. The reality is USB is less than half its native speed on the TC cf on the computer.. and it wasn't that fast to begin with.
Plug the hard drive directly into the computer and mount the sparsebundle and see if the TM then can access it.. but you might need to use your admin login not your son's.
Personally if the TC disk is not big enough.. replace the TC with a larger disk version.. or the disk in the present one.. do not use disks hanging off TC. It has enough reliability issues without adding to them.

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

Pop-up screen not showing while accessing transactions in SAP CRM WEB-UI

When we are logging on SAP CRM WEB UI, for transactions like Lead, Complaints and Activities-
Sometimes Pop up screen is showing for selecting transaction types, but sometimes it is not showing.
We have tried it on different work stations with same user id and standard business roles , but we are not able to trace the problem. Also with same id sometimes error shows, "No business roles attached, not allowed to logon,
after that when we tried on other workstation with same id we were able to access all transactions.
Please suggest what would be the problem.
Rishikesh

This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
Just check if your business role is properly configured. Thats all i can say.
Regards
Kavindra

Authorization issue on SHD0 transaction variant in R/3

Hi,
Can anyone help me on the below issue?
Created a transaction variant ZME31K using SHD0 on R/3 system with the base transaction ME31K.
And created a transaction ZME31K for the above transaction variant.
Created one ID which has access only to transaction ZME31K.
But when tried to create contract using ZME31K, it allows to create the contract, but ended up with message "You are not authorized to use ME31K".
Anyone faced similar issue before? how this can be resolved? As per the busniess requirement, they can provide access only to the transaction variant for the user and they will not be assigned to ME31K.
-Thanks,

> We are doing an Upgrade assessment wherein at R/3 side, the system is being upgraded from 4.6 to ECC 6.0.
> I wanted to know the impact the Change in Transactions at R/3 side.. namely transactions..
> AS02, CT02, F-02, F-41, F-49, FB01 would have on BW.
What do you mean? I don't get your question. What impact should those transaction have on BI?
Markus

Issue in accessing transaction OBYA

Similar Messages

Maybe you are looking for