Issue in Assignment of company codes to controlling area TKAO2 and OKKP

Hello Gurus,
I configured company code and controlling area in development client and transport to Testing client.But in QA client I can see in the Table TKA02 and respective assignment of company code to controlling area .But if I am checking in TCode OKKP and selecting Controlling area and checking the company codes assisgment there is no asssisgmnet. is this issue relating to transport as I am FICO consultant not geting solution.
This issue pertain to only one controlling area other controlling area with there company code assignment is correct.
Thanks a lot
Edited by: Manu Rathore on Apr 7, 2011 8:56 AM
Edited by: Manu Rathore on Apr 7, 2011 8:58 AM

Hello Balaji,
But I transport everything through one transport request and I haven't maintain any sequence.can this issue be due to mine non maintaining of sequence in transport request or something else?
if so How to solve it.
Many Many Thanks
Manu

Similar Messages

Assignment of Company Code to Controlling Area

Hi All
Please see if you can help me out.
I am working on a Singapore project.
I have 4 company codes say 2000,3000,4000,5000 which have been assigned to a company SGSS.
Then I created a controlling area S001.
I successfully assigned Company Codes to Company & Company Codes to Credit Control Area 5100.
But when I try to assign my Company Codes to Controlling Area S001, the system throws a problem saying,u2019 Data in Company Code 2000 is not maintainedu2019.
I have maintained all the data in Company Code 2000. But as per my knowledge we donu2019t maintain u2018currency, fiscal year variant, and chart of accountsu2019 in Company Code. All these fields are maintained in u2018Controlling Area S001u2019.
__Data in company code 2000 is not maintained.__
__Message no. KT294__
__Diagnosis__
__Assignment control requires that the currency, fiscal year variant, and chart of accounts are all maintained in the company code. At least one of these settings is not maintained in company code 2000.__
__Procedure__
__Complete data maintenance in company code 2000. Only then can you assign company code 2000 to controlling area SG01 possible.__
Please see if anyone can bring some light on thisu2026..
Thanks & Regards

Hello,
You need to fulfill two basic rules to assign two or more
Company Codes under the same controlling Area:
Operating Chart of Accounts shall be the same for all
     Company Codes.
Fiscal Year Variant shall be same for all Company
     Codes.
       However, the fiscal year variant in the controlling area and the company codes
       can have different number of special periods. The number of posting periods
       must be the same.
Please recheck that you have fulfilled these.
Regards,
Ravi

Assign Company Code to Controlling Area

Sap FICO Experts,
I have error in OX19 T_code. Here I had to assign the company code to Required controlling Area. But it exists Error, "Data in Company Code SMSL not Maintained"
Kindly tell me What I have to do the futher Process.

Hello,
review the settings of the company code SMSL in transaction OBY6. Pay special attention to the assignment of CCode to CoAr... or other similar settings related to controlling...
If this doesnt help, pls post here the number of the message.
I hope this helps.
Richie.

Company code Vs controlling area.

Hi Friends,
Please let me know if i can assign one company code to multiple controlling areas.
If no how do i know which company code aviliable to assign.
Regards,
krishna.

Hi,
It is not possible.
CONTROLLING AREA:Controlling Area is a Organizational unit that represents a closed system for Cost Accounting purpose.
To this purpose you need to maintain Controlling Area. To this Controlling Area you need to activate the components of
Controlling for a fiscal year.
To this Controlling are you have to assign your Company Code. A Controlling Area may be used 2 or more Company Codes.
That is called CROSS COMPANY CODE COST A/C. If you are using common Controlling Area for 2 or more Company Codes then you
need to maintain consistency of the following.I.
CHART OF A/C                : must be same for all Company Codes.II.
FISCAL YEAR                  : must be same for all Company Codes.III.
PERIOD & CLOSING              : must be done at the same time.
currency                      : it may be different.
for one controlling area you can maintain multiple Company Codes but for one Company code you can maintain only one
controlling area.
let me know if u need more information.

ASSINING COMPANY CODE TO CONTROLLING AREA

hi,
iam trying to assign the company code to the controlling area but there is field C Ctr Hierarchy which i need to fill up, how can i do that one before i assign company code to controlling area

when you are creating a Controlling Area Cost Centre Standard Hierarchy is mandatory to can as well give the Std. Hier. while creating Controlling area itself and save it. The System will remind you that the said hierarchy is not maintained and should it be maintained now?
Click Yes, and save again.
the controlling area and std hierarchy get created simultaniously.
Assign points if found useful
Regards
Praveen

Cant assign company code to controlling area

Dear All
I have created a compnay code but when ever i want to assign it with controlling area its show no data maintained .can any one give me a solution with TC .
Yeasin

Hi
Controling area chart of accounts and fiscal year and Chart of accounts and company code Chart of account and fiscal year should be the same
Have you checked it?
Thanks & Regards
Phaneendra

Error Mssg: FI673 while assigning company code to FM area

Hi,
I have multiple company codes and only one company code (A) is assigned to FM area and another company code (B) is not assigned to FM area but some transactions have already been posted in dev client, I got the following error message while trying to assign the company code B to the same FM area.
"You must not change assignment to company code B
Diagnosis:
There is already actual data for FM area, which is assigned to company code B"
Please note that I have already deleted the FI transactions for company B thru t-code OBR1 but unable to delete the CO transactions as multiple company codes assigned to one CO area.
Please let me know how to overcome this issue of assigning the company code B to FM area.
Thanks
VS

Hi,
check SAPNET note 1502436 maybe its helpful.
Best regards, Christian

Assign Company Code to FM area greyed out

Hi,
We are in 4.7 and currently have assigned one company code to FM area and now we have created a new company code and want to assign the new company code to the existing FM area but noticed that in IMG 'Assign company code to financial management area' the field 'FM area' for the new company code row is greyed out and unable to assign it.
Please let me know if I have missed any configuration.
Thks
VS

Hi,
We can assign one FM area to more than one company code & not required any additional configuration
I Guess, when you are trying to assign, same time some user using the same table related to FM area or Company Code.
so Just try again with same path
Thank you
Anil

Changing plant assignment to company code

Hi,
Need your help urgenly!!!
We have a plant AXXXX assigned to company code AXXXX over a year and we have number of open PO's , GR's and delivery etc for this plant and now we want to change the assignment as plant AXXXX to be assigned to company code BXXXX.
Here i want to know the impact on MM as well as FI point of view for changing the company code assignment for the plant.
Regards
Mariappan V

Despite of the fact that OX18 allows it technically to re-assign a plant to another company than before (it must be possible as anybody can make errors which may need to be corrected), I personally would not do this for a plant which was already active. At least I would ask SAP directly for advice.
e.g. if you have stock in this plant, then the stock value will not automatically transfer from company A to company B's General ledger, just because you reassign a plant in OX18.
A purchase order has as well the company code mentioned in the header data. And there are several error messages that may come up when changing those purchase orders after a reassignment, as this company code conflicts with the new company code.

Unable to assign multiple company code to a controlling area in PPOME

Hi Experts
In PPOME I was trying to assign multiple company codes under 1 controlling area in account assignment. e.g. ABC is the company, its 2 company codes, ABC1 and ABC2.
In PPOME when I am assigning the root org unit (ABC) with controlling area ABC1 and company code ABC1, it hierarchially inherits the below structure.
Whereas when I want to change the company code for ABC2 orgunit, it doesnot give the provision to change. It hierarchially inherits the root org unit structure.
I have tried to differentiate it by creating different costcentres for different companycodes, but that also doesnot help to fulfill the need.
Please help me to solve the issue as early as possible.
Warm Regards
Anwi

Hi Rajdeep
The same function can be handled from PPOME also, because in case of assignment of enterprise structure components with org structure components we use IT 1008.
However, if yours process is followed, then also I am unable to change the COMPANY CODE. Rest can be well taken care of.
Cheers
Anwi

Error--Control indicators not assigned to company code

While creating PO in IDEAS following error is coming.
"Control indicators not assigned to company code"
Pl . suggest the remedy,
Thanks a ton,
Regards,
NB

Goto T code OKKP select your co.code on left side click on Activate components.
in first tab " activate components" activate cost center , order mgmt, comm mgmt etc and save it.
Reward if useful;
Rgds
GIrish Kavital

Profit center assignment to company code

Hi,
We have 1 controlling area & 3 company codes A, B & C. We are restructuring Cost Centers & Profit Centers for company code A. Out of the 3 company codes, B has no separate profit center standard hierarchy. The cost centers of B are currently assigned to profit centers of A.
Now that we are changing all the cost centers & profit centers of A, how do we deal with the cost centers of B which are assigned to the old profit centers of A?
If I try to change the master data of Profit centers of A to exclude the company code assignment of A & only have company code assignment of B so that the cost centers of B are the only ones assigned to old profit centers of A, system throws an error saying that :
Cost centers assigned to the profit center are contained in the company code in question.
Procedure:
    Remove the existing assignment between Cost center **** and profit
    center ***. Note that other assignments might exist, which you will
    also have to remove before you can delete the profit center. For an overview of all existing assignments, use the assignment monitor.
Is there any other solution to this? Can the Profit center assignment to company code be time-dependant?
Or will we have to keep the old profit centers of A unlocked for cost centers of B & use some validations to prevent posting of Compnay code A transactions to old cost/ profit centers.
Regards,
Sangeeta

Hello,
We are having the same issue. Would you please advise what solution you used to correct this.
Thanks,
Jordan

Changing assignment of company code to Company

Dear Experts
Need your guidance on this one. In a productive company code, will changing the assignment of the company code from Company1 to some other company have severe effects?
Please highlight all the impacts that such an action can have.
Thanks for your help.

Hi,
I don't think there will be any issue in changing the company code assignment as long as both have same currency. However, there could be some issue in consolidation because of intercompany elimination due to change in trading partner.
Please explore further on this in Sandbox before going ahead.
Best Regards,
Madhu

Assignment of company code to the Equipment.

Hi All,
I am new-able in sap pm please guide me.
During creation of Equipment why we are assigning the Company Code, if plant is already assign.
What is the need of company code.
Thanks & Regards,
B.K.Pathak.

You will not assign the company code manually. Once you assign Maintenance plant, system will copy from the Enterprise structure configuration.
To validate the usage of company code in equipment master:-
Asset numbers will be assigned to company code. These assets are created against company code only.
Cost centers will be assigned to equipment. Cost centers are created against company code / controlling area.
To validate the Asset & Cost Center entries in Equipment master, company code should be available in Equipment master.

Unable to find company code in assignment of company code (OX19)

Hi,
Please advice me why I am unable to find the newly created company code in assignment of company code (OX19).
TQ

Hello
Comapnay code can be assigned to one controlling area only, so this might be assigned to some other CO Area, check the table TKA02, you can see that.
Before you can delete the assignment, you must delete all master data in controlling area ALMA referring to company code you want assigned.
Regards
Dinabandhu

Issue in Assignment of company codes to controlling area TKAO2 and OKKP

Similar Messages

Maybe you are looking for