Issue in Automatic Packing

Hi All,
Automatic HU packing Functionality for Material A was working fine till I had one PAcking Instruction created in POP1 & assigned it in POF1.
Now I want to use same PAcking Instructions for Material B. So I assigned Material B to same Packing Instructions in POP2.
Also Assigned Packing INstructions in POF2.
But when I add Material B in the scenario both of them are not working.
Can anyone pleaze help me.
Many Thanks in Advance.
Best Regards
Hiren

Hi Andre,
Thanks for your reply.
Your understanding is absolutely correct. And I also understood now that if the materials are different than there has to be different packaging Instructions & than assign it in POF1.
Yes practically it is correct. but what if I have to use same Packaging Material for another material also? Should i create new Packaging Instructions in the system?
Thanks Krishnan for your reply
but there is no message as such. the problem is the material doesn't get packed automatically during INbpund delivery creation itself with the scenario mentioned by me in first message of this thread.
Regards
Hiren
Edited by: Hiren N. Panchal on Nov 18, 2010 5:26 AM

Similar Messages

  • Automatic Packing Via IDOC

    Hi,
    As we are creating an Inbound delivery via IDOC, is there any settings to be provided in DELVRY05 idoc to let SAP know that it needs to do automatic packing.
    The issue here is when we create Inbound delivery manually, the packaging is done at different hierarchy level in the packaging screen.
    Whereas via creating through IDOC, we are able to get it done only at hierarchy level 0.
    You can check in EDI-PACK-TTL Content(Display HU screen)
    Doesn't standard SAP handle this via IDOC function module.
    Regards
    Krish

    Hi Sam
    You may want to investigate if you can use BAdi 'IDOC_CREATION_CHECK' to prevent the idocs from being created.
    Just use method IDOC_DATA_CHECK and clear the CREATE_IDOC flag based on the IDoc Type.
    Cheers
    Alex

  • Error in Automatic packing

    Hi experts,
    I Configured Automatic packing with packing instruction for my client and now getting 2 errors like In line 1 loop no packing proposal data could be determined and another error is No packing instruction found for material, While I maintained condition records for Packing instructions in POF1 & also created Packing instructions in POP1 Tcode.
    Please suggest.
    Regards,
    Shaktiprasad Dash

    Hi Shaktiprasad
    To trigger output from Handling Unit please see the following configuration settings:
    1) SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Handling Units
    Here maintain all necessary configuration based on business requirement.
    For triggering output at time of Goods Issue, first define proper Condition Table then define Access Sequence with reference to table and set Requirement field accordingly. Within Maintain Output Type assign the Access Sequence to the Output Type you are using. Finally, maintain & assign Output Determination Procedures.
    2) Inventory will get updated at time of Post Goods Issue at HU level, partial and complete quantities are supported.
    A. Posting Goods Issues for the Complete Quantity:
    Choose Logistics > Production > Production Control > Goods Movements > Material Staging > Goods Issue with HU
    Logistics > Central Functions > Handling Unit Management > Goods Movement for Handling Units > Goods Issue for Work Order
    Logistics > Material Management > Inventory Management > Goods Movement > Goods Movement for Handling Units > Goods Issue for Work Order
    Enter the order number and choose Propose HU.
    To post complete goods issues, choose <save>.
    B. Posting Partial Goods Issues:
    Choose Logistics > Production > Production Control > Goods Movements > Material Staging > Goods Issue with HU
    Logistics > Central Functions > Handling Unit Management > Goods Movement for Handling Units > Goods Issue for Work Order
    Logistics > Material Management > Inventory Management > Goods Movement > Goods Movement for Handling Units > Goods Issue for Work Order
    Select a HU and choose box icon.
    Change the quantity and choose <green check>.
    To change another item, continue as in step 3.
    To post the goods issues, choose <save>.
    3) You can decide per plant and order type whether partial goods issues are allowed. The setting in Customizing:Logistics General > Handling Unit Management > Basics > Production > Production Supply > Set partial GI Indicator.
    Regards,
    km

  • Automatic Packing at Delivery level using PACKMODI

    Hello Friends,
    To activate the automatic packing at delivery level without any packing instruction the PACKMODI enhancement can be used.
    Am i Right??
    If so Kindly share some inputs how to used this Enhanacemnt
    It includes 3 User Exit.
    There is no documentation provided for it.
    Pl can any one explain its functionality
    and how it is helping to packed automatically at delivery level

    This is the doucmentation for this enhancement:
    The extension PACKMODI contains user exits for automatic packing.                                                                               
    As of Release 4.6C, the packing instruction determination and packing  
    according to packing instruction functions are available for automated 
    packing. New user exits in the form of  BADIs were created for automated
    packing to add data to the packing instruction determination function or
    to have the packing instruction that is to be used appear as a default.
    The class for automated packing is called BADI_HU_AUTOPACK.                                                                               
    Generally, customer functions after 4.6C only exist in order to be     
    compatible with previous releases. If you want to implement your own   
    automated packing logic, you should only do so by way of this new class.
    It is not necessary to use packing instructions in order to implement  
    your own automated packing logic.                                                                               
    Therefore, the previous sample routines for filling in customer        
    functions no longer exist.                                             
    Regards,
    ravi

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • Urgent: Issue in Automatic workflow Customizing.

    hi,
    Can someone please help me with this issue in Automatic workflow customizing ( SWU3)
    When I try to execute the step
    Maintain Runtime Environment > Schedule Background Jobs with missed deadlines
    I get the error message saying
    "Output Device "" not known"
    Can someone help me how to resolve this? This is very urgent for me.
    Regards,
    Sam K

    The guidelines tell you not use the word urgent in your message title, so please don't. Personally I  try to not answer such questions until at least one day has passed, giving you some time to cool off and perhaps solve the problem on your own.
    I can't recall seing this message myself, but my guess is that either your user or the user WF-BATCH (if the job is being scheduled with that user) has a default printer (output device) that is not defined in the system.

  • Automatic packing for sales document

    Hi all,
    i have created a sales order with BAPI BAPI_SALESORDER_CREATEFROMDAT2. Is there a BAPI or a FM that generate automatic packing for the items in the sales document. I want something like VA02, extras | packing proposal, Automatic packing.
    Regards
    Roberto

    Hi,
    I am in dire need of understanding how to activate packing in sales order.
    Can you please help me?
    Regards,
    SAP lover

  • Problem in multilevel automatic packing

    Dear All,
    I am facing problem in Multilevel Automatic Packing of materials. I have done settings of the packing transaction profile; define check profile for packing status and of packing instruction determination in customizing. I am able to packing material upto 1 level only.
    I have already created packing instruction using T-code POP1 and also created subordinate packing instruction for packing handling units in next level, assigned this to packing determination record using T-code POF1. I have used 1st packing material as main material in next packing instruction and the larger size material as next handling unit. The settings are:
    POP1
    PI 1
    P 214 Target Qty 1
    M 22   Target Qty 1
    I  5     Target Qty 2
    PI 5
    P 215 Target Qty 1
    M 214 Target QTY 2
    POF1
    Determination record ABCD
    Material 22 PI 1
    I also tried different condition type for this process but didnt succeed
    I am not getting any error, just receive a message Handling units were created. But when I try to pack handling units using automatic packing option then system prompts me msg that there are no items to be packed.
    Kindly give me solution.
    Regards,
    Anand Malu
    Jr. SAP SD Consultant

    Hi,
    I want to pack 1 medicine box in 1 small carton and then 10 small cartons in 1 Large Carton. I am able to pack 1 medicine box in 1 small carton thru automatic packing but not able to pack 10 small cartons in 1 Large carton. For this I have maintained packing instructions which are:
    Packing instruction 4
    Item no.   Item Cat.   Component   Tgt qty   Min qty   Round qty  unit of measure Load carr MixID
    10             P             214                 1               0           0                 Carton            Yes        No
    20             M            22                   1               1           0                  Box                No         Yes
    30             I              5(Pack instr)    20             0           0                  -
    If I maintain Min. qty 1 for item no. 30 then I get error while packing "Min. qty from packing instruction not reached packing not possible"
    Packing Instruction 5
    10            P              215                1              ---             --              Carton               Yes        No
    20            M             214                20              ---            --               Carton               No         Yes
    Packing Instruction determination records
    Determination type   ABCD
    Material                         Packing Instruction
    22                                 4 
    Packing determination procedure contains determination type ABCD only.
    Regards,
    Anand Malu
    Jr. SAP SD Consultant
    Edited by: genius_anand on May 2, 2009 8:38 AM

  • Errors in Automatic packing

    Hi experts,
    I Configured Automatic packing with packing instruction for my client and now getting 2 errors like In line 1 loop no packing proposal data could be determined and another error is No packing instruction found for material, While I maintained condition records for Packing instructions in POF1 & also created Packing instructions in POP1 Tcode.
    Please suggest.
    Regards,
    Shaktiprasad Dash

    Have maintaintained packing material type in Material master basic data.Please maintain then system serch as per basic data screen.

  • Automatic packing with Usage

    Dear All,
    I am working on Automatic Packing,where user can select Packing Instructions. But I am getting this error In the  1 loop, no packing proposal data could be determined ,MESSAGE CLASS      HUGENERAL , NO     107
    No packing instruction could be found for material 760310205098, MESSAGE CLASS VHUPD , NO 2
    I have maintained Packing Instructions in T-Code : POP1.
    I have maintained  Packing Instructions Determination in T-Code : POF1, Determination Type is SHIP  and Key Combination is Material/Ship to Party / usage
    In Delivery I am able to select required Packing Instruction and Usage as "M-Sample" , by selecting one option and executed Automatic packing the above said error accord.
    Please provide a solution.
    Regards

    Dear Ilango R V.
    Thank you very much for your reply. In Material Master > Sales General/Plant TAB , configured Matl Grp Pack.Matls.
    I am doing Sample Sales for  Customers, So, my user required a option to select , required Packing Instructions in Delivery.
    As said in my previous question in Delivery I am able to Select required options , but when I proceed for Automatic Packing error message displayed.
    Regards

  • Automatic Packing

    Hi,
    We want to set automatic packing of finished material in following way-
    200pcs of finished material be packed in 1 tray, for 201 pcs,system should propose 2nd tray automatically.
    For automatic packing,  We have created determination record(POF1/2/3), packing instruction (POP1),packing procedure,packing profile,our main difficulty is that we could not establish the link to connect packing proposal to sales order /delivery note.How this can be done?
    Please guide,matter is urgent.
    Points will surely rewardwd.
    Regards

    Hi Mrunal Ambatkar
       Ensure the following for automatic packing
    - Have you assigned the Material Group: Packaging Materials for your FG material in the material master in the basic data1?
    - Have ur item category marked as relevant for packing?
    - Have your maintained all settings for the packing mateial proposal like Handling unit number ranges,Define Packaging Material Types,Define Material Group for Packaging Materials,Define Allowed Packaging Materials?
    Let me know what is the error your are getting?
    Regards
    Shiva

  • Automatic packing of delivery through BAPI or function module

    Hello,
            I have a requirement to invoke the automatic packing functionality of a delivery through a delivery output type as soon as the delivery is saved in the system. We have a delivery output type ZPAC with special function. I am looking for a function module or BAPI which satisfies the functionality so that I can plug it in the custom program I develop to drive the ZPAC output type. Any inputs will be greatly appreciated.
    Thanks,
    Giri..

    Thanks Mike. Appreciated ur answer.
    I am trying same function module "CBGL_LB61_LABEL_GENERATE" in SE37 to get a sense how it generate the file.
    But when i execute in different data combination, it never executed successfully.
    So do you have more info to execute this function module successfully.
    ex: I_label accepts a ID which is 4 digit. so which id it says here.
    Thanks again Mike. Let me know if you have more info on this.

  • Issue with weekly pack and no one can help me !!

    Hi there, on Thu. 9th of july I top up my PAYG line, for 5GBPOn 17th July it was supposed to start automatically a new week cicle but it has not. I wait till mid day then as anyway was showing I had still 4GBP I decided to call 150 to have support but unfortunatly there is no direct option to have a quick help and basically I had to end the call.I decided to top up again at in the webpage was says there was no credit enough and I did it.Unfortunatly I have been charged for that call and I believe it should have to be included in my weekly calls.I asked support to the shop and they suggest me to call 150 serching for billing department, but there are no option to explain my issue to someone, neither in the web page.Can someone contact me and try to solve this issue ? Marco.

    Hi XRaySpeX, probably I am not able to explain myself in a correct way. I will try again to point out the issue.
    On Thursday 9th of July I top up my number £5, so for next 4 weeks should have to restart my plan every Friday, discounting automatically £1. But then the next week on Friday, I could not connect my phone to check my email, and the issue was I had no credit enough to start the new pack. I check it on web page but my balance was £4,01. So basically I believe it was just a technical issue related to EE system. I wait until mid day and then I tried to call 150, as internet was not working yet, and for this call I have been charged £0.30 Finally I decided to try to top up other £5 and after that it worked, but then my balance was  £8.71.
    So I believe if I have a balance of £4.01 I shouldn't have to be charged as I have 10 minutes call included in this plan, is that right ? Then I just want to get refunded £0.30 What do you suggest me to do ?
    Marco.

  • Pricing Issue for Combo Pack

    How to configure a combo pack pricing? for example each soap cost Rs.17 but if you buy a combo pack of 4 soaps then it is Rs.54. Please assist..
    David

    Hi,
    Using  "Free goods " concept in R/3 (Sales and Distribution)you can get the exact solution for the above issue.
    Free goods is a kind of quantity discount, and is granted in the form of a goods delivery that is free of charge when a certain quantity is purchased. You can use it to encourage your customers to order greater quantities.
    You can find more information in the SAP Implementation Guide (IMG) for Customer Relationship Management under Basic Functions  ® Free Goods ® Set Up Free Goods.
    In order for free goods to be determined automatically in the sales order, free goods master data must be maintained.
    Hope this will help.
    Zurki

  • Report Navigation issue causing automatic logoff from OBIEE 10.1.3.3.2

    Hi BI Experts,
    Here is my unique problem i guess
    the Environment is OBIEE 10.1.3.3.2 and using OOB Oc4j app server.
    There are 4 Union Reports(Report1, report2, report3, report4) where we enabled Navigation from report1 to report2, report2 to report3, and report3 to report4. since this is Navigation from one Union Report to Another report, the OOB Navigation did not work.
    Navigation piece was achieve using 'GONav' function so that Value selected from Report one is Passed as filter to second report and so on. The Problem is.....when Navigated from report1 to report2 until report3, the Navigation works fine and filters gets passed. when Navigating from Report3 to Report4, the OBIEE Users is automatically logged off and user has to enter the username and password to enter. When username/password is entered at this stage, the Report4 will run and display the results. Please help us immediately as we are live and this is P1 Issue.
    we did not find this issue in DEV/UAT....its working fine after replacing the webcatalog from PRODUCTION back to DEV and UAT.
    we tried trouble shooting this by
    1. restarting all the BI Services including the OC4J
    2. unpacking new webcatalog and
    3. Increasing the JVM Size on Solaris
    Please Help
    Thanks
    Rake

    @[html]"<font class=Nav onclick=\"JavaScript:GoNav(event, '/shared/SCM-BBB/Report_Set1/FCGS_Hybrid_Summary' , 'Dim - Products', 'BusinessUnit', '"@"');\">"@"</font>
    Saw Log
    Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:32 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:34 2010
    File: project/webcatalog/path.cpp Line: 318
    Properties: RptPath-/shared/SCM-BBB/Report_Set3/BU_Hybrid_Summary;SID-0d41s0epqnnq9a7gn4g81oc3si;ThreadID-63;HttpCommand-PortalGo;RSP-d:dashboard~p:ae3g2pnbb1kelt3m~r:ce6sfi6quta3gbtb;RemoteIP-10.72.20.104;User-rmuppiri
    Location:
         saw.views.evc
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Invalid item name () -- not allowed to be empty
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-97
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-96
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-97
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Type: Error
    Severity: 40
    Time: Mon Nov 22 22:47:59 2010
    File: project/webthreads/threadpool.cpp Line: 312
    Properties: ThreadID-95
    Location:
         saw.threadPool
         saw.threads
    ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 10.72.20.104.
    Error Codes: Y9D5IDNK:
    HOST_NOT_FOUND
    Edited by: kumr on Nov 25, 2010 9:31 PM

Maybe you are looking for

  • 10gR2 RAC and XA transactions

    We have a 3 node 10gR2 cluster. The middle tier is using XA drivers. They are connecting to the database via a load balanced service where all nodes are preferred. DTP for the service is also set to No. Does anyone know if this setup could be problem

  • What DVI-D cable please for HP Pavilion?

    I have just bought a new Pavilion 500-250ea desktop + Pavilion 22xi screen.  Unfortunately the description 'desktop' seems to have been taken too literally by HP <g> - once the PS was in its storage under the desk, then the DVI-D cable supplied with

  • Sony 3D BluRay Player

    I just bought this 3-D player and when I load up Madagascar3 in3-D (that I bought at Best Buy) it shows a screen that I must have a compatible 3-D player to see the movie. I can see the 2D movie. Spending 30 bucks for a movie that I can't see on this

  • Print button that prints particular pages of form

    Hi, I'm not familiar with scripting, but I'm thinking a script might be necessary for what I want to do.  I have a form that is 4 pages long.  The first two pages are instructions, the last two are the actual form.  Can I add a print button to the do

  • DNS NS Record

    After DNS has been initially set up, when going back into Zones should the NS entry where you named the machine have the fully qualified check box 'checked' and the FQDN in the name area? I'm not sure when this was originally set up if the FQ checkbo