Issue in BP creation in CRM 7 connected using XIF from CRM 4

Hi All,
We have connected CRM 7 and CRM 4 using XIF
We are facing an issue where 2 IDOCs (with same Basic type CRMXIF_PARTNER_SAVE_M01) are generated at same time while using XIF adapter dring busines partner creation. First IDOC is succesful and other fails with error message " Business patner locked by you".
Can you please share some expertise on this.
Thanks & regards,
Mohit SIngh

Hi Bala,
Which version of CRM are you using? There are some notes for CUST_HIERARCHY BDoc errors. Please have a look at them in the Support Portal.
CRM_BUPA_MAIN_VAL is used for validation of rules set in CRM Server and maybe you dont have the same mandatory rules in MSA.
Best Regards,
Ankan

Similar Messages

Creation of MSA Sandbox for migation from CRM MSA 40 to CRM MSA 70

Hello community,
We are planing an upgrade from CRM MSA CP 4.0 SP 08 to CRM MSA CP 7.0.
As we know that one of the biggest issues is the code migration, we want to setup a sandbox system.
The idea is to install a repository server and a MDW in 7.0, then put the 4.0 repository backup to the 7.0 repository server and
start the CMT (code migration tool). We have installed the landscape already, but if we want to install the CMT wer ge the message, that the MDW ist not installed on the machine.
The question that we have , is our plan ok, or do we need to install a 4.0 repoitory server and make the update of the repository server later on ?
As i cannot find a proper description for the steps i want to ask you, what steps are correct ?
If anyone made some experience already, it would be great if you could share them.
Thank you very much
Frank

Hello
You are mistaken. CMT should be run only from 4.0 MDW machine, this tool can not be run from 7.0 MDW machine.
Please refer to the note 1087949 for the issue mentioned.
Regards
Shankar

Errors in PHASE DIFFEX phase during the CRM 6.0 upg from CRM 5.0

Hello,
I am in the process of upgading our CRM systems from CRM 5.0 version to
CRM 6.0 and having issues at the PHASE DIFFEXPADDE during the upgrade
right after the DB_ACTION_LOWQ1 phase and ADJUSTCHK being the previous
phase.
We are currently at CRM 5.0 dual stack system on Linux X86_64 SLES9 and
DB - Oracle 10.2.0.2.
I was able to finish the PREPARE phases on both ABAP & JAVA stacks
successfully.
The phase DIFFEXPADDE is failing with a error message in the
DIFFEXPA.ELG which I have mentioned below. I am also attching few other
related logs for your reference in the attached zip file
(DIFFEXPA_logs.rar)
DIFFEXPA.LOG
UpgDialog.log
SAPECCI700.C15
TP00.ECO
SAPup.log
"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI700.<SID>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW190 "INDX" "WFMFC_INDTOR_GRP 01 " has no active
version.
Long text:
Cause
You have tried to export a Dictionary object that has no active
version. The reason for this probably is that the author of the DD object has forgotten to activate it.
System Response
The transport request is not released.
What to do
Activate the Dictionary object and repeat the export.
2EETP200 Export with errors, request will not be imported
Long text:
Cause
The export was finished with errors or terminated (return code >=
8).
System Response
The request is not imported. Instead it is set back to "can be
changed"
in the source system.
What to do
The export log contains remarks concerning the reason for the
incorrect
export. Correct the error and repeat the export.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI701.C15
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI702.C15
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I am stuck at this step and unable to move forward until I get past
this error. Please let me know how do I proceed and if you have any
more questions.
Would appreciate your early help!
Thanks in advance!

I was able to get past this issue by logging in to the client 000 and
activate the object WFMFC_INDTOR_GRP from transaction SE11.
Dictionary Object --> Activate from the menu bar. Gave me few warnings
but did not error out.
Hence went past the phase and the upgrade is progressing as of now.
However, can you please confirm if this is a correct fix or do you want
me to do anything different since I have not reached the MODPROF_TRANS
phase yet.
Thanks

Creation of PODs for different divisions from crm to ISU

When we try to create one Premise and 2 PODs of different divisions in CRM using UTIL -IC role , the data gets replicated as two premises in the ISU. The standard CRM_POD_INST template category is used for this.
Is this standard functionality?
Please provide info on how to overcome the above?
Regards,
KAK

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

Issue with select query to fetch data using Join from two tabels

Hello All-
I want to fetch the ShowName as "SUN NIGHTLY NEWS" and EpisodeName as "091706"
based on the condition a.TitleNo=b.TitleNo and a.seriesNo=b.TitleNo.
If i use the only first condition-a.TitleNo=b.TitleNo than output is displayed as-
SchedItemNo |      Showname|      EpisodeName
2702154     |     091706     |     091706
If i use the second Condition-a.seriesNo=b.TitleNo than Output is displayed as-
SchedItemNo|     Showname      |     EpisodeName
2702154     |     SUN NIGHTLY NEWS |     SUN NIGHTLY NEWS
Than i tried following Query to use the Union based on two conditions:-
Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
a.ScheditemNo in ('2702154')
Union All
Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
a.ScheditemNo in ('2702154')
than it display the following result-
SchedItemNo|     Showname |     EpisodeName
2702154     |     091706          |     091706
2702154     |     SUN NIGHTLY NEWS |     SUN NIGHTLY NEWS
Here also values are not what i want :(
I want the result to be displayed as using SQL:-
SchedItemNo |     Showname      |     EpisodeName
2702154     |     SUN NIGHTLY NEWS |     091706
Please help me out!
Thanks in Advance for putting your efforts.Looking forward for your replies.

SQL> create table scheduleitem
2 as
3 select 2702154 scheditemno, 1 titleno, 11 seriesno from dual
4 /
Tabel is aangemaakt.
SQL> create table titles
2 as
3 select 1 titleno, '071706' titlename from dual union all
4 select 11, 'SUN NIGHTLY NEWS' from dual
5 /
Tabel is aangemaakt.
SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
2 from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
3 a.ScheditemNo in ('2702154')
4 /
                           SCHEDITEMNO TITLENAME        EPISODENAME
                               2702154 071706           071706
1 rij is geselecteerd.
SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
2 from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
3 a.ScheditemNo in ('2702154')
4 /
                           SCHEDITEMNO TITLENAME        EPISODENAME
                               2702154 SUN NIGHTLY NEWS SUN NIGHTLY NEWS
1 rij is geselecteerd.
SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
2 from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
3 a.ScheditemNo in ('2702154')
4 Union All
5 Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
6 from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
7 a.ScheditemNo in ('2702154')
8 /
                           SCHEDITEMNO TITLENAME        EPISODENAME
                               2702154 071706           071706
                               2702154 SUN NIGHTLY NEWS SUN NIGHTLY NEWS
2 rijen zijn geselecteerd.
SQL> select a.SchedItemNo "SchedItemNo"
2       , show.TitleName "Showname"
3       , episode.TitleName "EpisodeName"
4    from ScheduleItem a
5       , Titles episode
6       , Titles show
7   where a.TitleNo = episode.TitleNo
8     and a.SeriesNo = show.TitleNo
9 /
                           SchedItemNo Showname         EpisodeName
                               2702154 SUN NIGHTLY NEWS 071706
1 rij is geselecteerd.Regards,
Rob.

No Authorization to OLAP Cubes during the creation of universe connection

Hello friends we are not able to see the OLAP Cubes during the creation of universe connection using the Quality system and Application server "sapbmw01" client 100, system # 00. But we are able to set up the connection in our development system.
I will highly appreciate if you can let me know if we need some special role to access the OLAP Cubes during the creation of universe connection using the Q system.
Surprisingly we are using SAP_BW_ALL in Quality system still we are not able to access the infocubes. is there some thing missing in CMS IN BO to make that work.
Thanks
Soniya

Hi Jyothy,
Refer the below link on how to create universe on Analytic View/Calculation View using relation connection in IDT
http://www.sapanalyticsguru.com/index.php/sap-bobi/31-universe-creation-on-hana-view-using-information-design-tool

CRM Connection with XI

Hi All,
I want to know how to connect SAP XI from CRM ?
I use the XIF-Adapter (XML /SOAP- interface).
Thanks in Advence.
Lemin

hi,
you can use standard XI's IDOC adapter
and send idocs from CRM to the XI
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

How To upload business partner into sap crm using xif Adapter by XML File

HI Guru's,
I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give imformation how can achive this .
Regards,
Naveen Kumar MS

Dear Naveen,
please see the information given in note 448742 General notes on CRM external interfaces!
Hope you can find the information!
Regards, Gerhard

CRM -- PI-- ECC using XIF and bdocs

Hi,
I wanted to know the solutions we can have to intrgate CRM Site details using bdocs with PI using XIF in CRM and send to ECC Server like CRM >PI>ECC.
Anyone who has done such a scenario kindly show some pointers on the same.
Regards,
Anirban

Anirban,
Seriously unless you are doing multiple backends or something strange, you don't even need PI for a CRM to ECC scenario. The CRM middleware does not use PI at all and basically it is standard configuration on the CRM side to send over the information.
Another question is why would you want to send the plant master from CRM back to ERP? Honestly the plant master should probably always be maintained in ERP. This scenario does not make sense from both a business and technical perspective.
Take care,
Stephen

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

Call a function module from CRM 5.0 via ITS to FICA

Hi
I want to call a function module in FICA (FICA is using sapgui) from CRM (IC-web) via ITS (Not integrated in FICA)
Is it possible and how should this be done???
If someone know how, please help
BR//JL

generally RFCs should not have user dialogs.
any how to handle your case, you need ITS and since FICA is a WAS 6.20 system, you need to have a ITS installed for FICA system, without which you cannot do that.
alternatively you can mimic the functionality of the RFC by programming the same in a BSP and call this from CRM system
Regards
Raja

Posting date from CRM Billing doc cancellation

hello,
I have an issue in the CRM billing documents transferred from CRM to ECC. When do a biling doc, the document and posting are taken from the document date in CRM billing document.
But when I do a cancellation of the billing document, the document date is taken from the document date in CRM, however the posting date is taken from the Value date in CRM. We have made some exits in CRM billing where the value date is determined as document date + 5 days.
I am not sure why the cancellation takes place on the value date. Can anyone here please explain and also tell how this can be made as billing document.
thanks in advance,
jigar

SB,
Have a look at user-exit USEREXIT_MOVE_FIELD_TO_VBKD in include MV45AFZZ
PeteA

Issues connecting BizTalk 2013 WCF to Microsoft CRM 2011 using ADFS

I have a Microsoft CRM 2011 instance I'm trying to connect to from BizTalk 2013 using WCF. The CRM instance is using ADFS based security
and basic "domain/user" "password" security. The OrganizationService has the following policy in the WSDL.
<wsp:Policy wsu:Id="CustomBinding_IOrganizationService_policy">
<wsp:ExactlyOne>
<wsp:All>
<ms-xrm:AuthenticationPolicy xmlns:ms-xrm="http://schemas.microsoft.com/xrm/2011/Contracts/Services">
<ms-xrm:Authentication>Federation</ms-xrm:Authentication>
<ms-xrm:SecureTokenService>
<ms-xrm:Identifier>http://example.com/adfs/services/trust</ms-xrm:Identifier>
</ms-xrm:SecureTokenService>
</ms-xrm:AuthenticationPolicy>
<sp:TransportBinding xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
<sp:IncludeTimestamp/>
</wsp:Policy>
</sp:TransportBinding>
<sp:EndorsingSupportingTokens xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:IssuedToken sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
<Issuer xmlns="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<Address xmlns="http://www.w3.org/2005/08/addressing">http://www.w3.org/2005/08/addressing/anonymous</Address>
<Metadata xmlns="http://www.w3.org/2005/08/addressing">
<Metadata xmlns="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<wsx:MetadataSection xmlns="">
<wsx:MetadataReference>
<Address xmlns="http://www.w3.org/2005/08/addressing">
https://example.com/adfs/services/trust/mex
</Address>
</wsx:MetadataReference>
</wsx:MetadataSection>
</Metadata>
</Metadata>
</Issuer>
<sp:RequestSecurityTokenTemplate>
<trust:KeyType xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">
http://docs.oasis-open.org/ws-sx/ws-trust/200512/SymmetricKey
</trust:KeyType>
<trust:KeySize xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">256</trust:KeySize>
<trust:Claims xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512" Dialect="http://schemas.xmlsoap.org/ws/2005/05/identity">
<wsid:ClaimType xmlns:wsid="http://schemas.xmlsoap.org/ws/2005/05/identity" Uri="http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn"/>
</trust:Claims>
<trust:KeyWrapAlgorithm xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p</trust:KeyWrapAlgorithm>
<trust:EncryptWith xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">http://www.w3.org/2001/04/xmlenc#aes256-cbc</trust:EncryptWith>
<trust:SignWith xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">http://www.w3.org/2000/09/xmldsig#hmac-sha1</trust:SignWith>
<trust:CanonicalizationAlgorithm xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">http://www.w3.org/2001/10/xml-exc-c14n#</trust:CanonicalizationAlgorithm>
<trust:EncryptionAlgorithm xmlns:trust="http://docs.oasis-open.org/ws-sx/ws-trust/200512">http://www.w3.org/2001/04/xmlenc#aes256-cbc</trust:EncryptionAlgorithm>
</sp:RequestSecurityTokenTemplate>
<wsp:Policy>
<sp:RequireInternalReference/>
</wsp:Policy>
</sp:IssuedToken>
</wsp:Policy>
</sp:EndorsingSupportingTokens>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
I've set up the following client configuration:
<binding name="ws2007FederationHttpBinding">
<security mode="TransportWithMessageCredential">
<message>
<issuer address="https://adfs20.example.com/adfs/services/trust/2005/usernamemixed"
binding="wsHttpBinding"
bindingConfiguration="stsBinding" />
<issuerMetadata address="https://adfs20.example.com/adfs/services/trust/mex" />
</message>
</security>
</binding
And referencing this for adfs specific communication
<wsHttpBinding>
<clear />
<binding name="stsBinding">
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="None"/>
<message clientCredentialType="UserName" establishSecurityContext="false"/>
</security>
</binding>
</wsHttpBinding>
As I try using it I get the receive the following error message
A message sent to adapter "WCF-Custom" on send port "SendPort6" with URI "https://crm-test.example.com/XRMServices/2011/Organization.svc" is suspended.
Error details: System.ServiceModel.FaultException: MSIS3127: The specified request failed.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.Tokens.IssuedSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecurityProtocol.TryGetSupportingTokens(SecurityProtocolFactory factory, EndpointAddress target, Uri via, Message message, TimeSpan timeout, Boolean isBlockingCall, IList`1& supportingTokens)
at System.ServiceModel.Security.TransportSecurityProtocol.SecureOutgoingMessageAtInitiator(Message& message, String actor, TimeSpan timeout)
at System.ServiceModel.Security.TransportSecurityProtocol.SecureOutgoingMessage(Message& message, TimeSpan timeout)
at System.ServiceModel.Security.SecurityProtocol.SecureOutgoingMessage(Message& message, TimeSpan timeout, SecurityProtocolCorrelationState correlationState)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open()
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.GetChannel[TChannel](IBaseMessage bizTalkMessage, ChannelFactory`1& cachedFactory)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendMessage(IBaseMessage bizTalkMessage)
MessageId: {0A8D8BB1-0838-43AF-B3A1-D63D432C22AA}
InstanceID: {B57B4979-2187-4CF7-8115-4D65B3952982}
What am I missing ..?
http://www.richardhallgren.com

Hi Angie and Richard
Currently I am also having the similar issue and I tried the settings you mentioned. But I get his error
The adapter failed to transmit message going to send port "WcfSendPort_OrganizationService_CustomBinding_IOrganizationService" with URL "https://examplecrm.com/XRMServices/2011/Organization.svc".
It will be retransmitted after the retry interval specified for this Send Port. Details:"System.ServiceModel.FaultException: The message with Action 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' cannot be processed at the receiver, due
to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver
have the same contract and the same binding (including security requirements, e.g. Message, Transport, None).
By any chance did you go through this error or do you have any suggestions?I am trying to connect from WCF-Custom adapter on BizTalk 2010 to CRM 2013 using ADFS.
Thanks
Narri

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

Anyone else having an issue with TCP connections using iCloud for Windows?

Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

Issue in BP creation in CRM 7 connected using XIF from CRM 4

Similar Messages

Maybe you are looking for