Issue in BPS Variables....Please anybody reply...this is really urgent(SOS)
<b>Hi dear friends, This is really a urgent problem and crucial Please anybody can share their ideas or atleast some inputs/ clues to clear the cobwebs in my understanding.</b>
I am facing problem in BPS Variables.
I created the variables 1.zqbs- employee responsible --->Userentry/default value.
2. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
3. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
ZCONPAR: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_ACTIVIT through zconpar
ZCONPER: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_CONTPER through the zconper.
These two variable info objects are calling in the planning layout lead column.
based on contact partner it should display contact persons for the contact persons we are applying the conditions(bp_reltype = bur001,bp_reldir = 2) to filter the contact persons.
In my case i am getting 3 values for the contact partner like 1000, 2000, 3000.
i am getting 2 values for the contact persons if i run the variables individual.
note: if i run BPS0 its going into loop and displaying multiple data means for 1 contact partner its applying all contact persons. at final it showing records like contact persons X contact partners means it showing more unvalid records.
how to avoid this situation.
contact partner contact person bp_reltype bp_reldir
1000 xxxx bur001 2
2000 yyy bur002 2
3000 zzz bur001 2
it should display like this
1000 xxx
2000
3000 yyy
but it showing
1000 xxx
1000 yyy
1000 zzz
2000 xxx
2000 yyy
2000 zzz
3000 xxx
3000 yyy
3000 zzz
Please anybody who have even a vague idea of solution can respond to this immediately.----SOS----
Even your smallest hint is greatly appreciated.
Yours truly,
your friend Bharath.
Thanks for the reply and I would trying these consistency check out again as a background job but I have already done these checks and have not been able to find any inconsistencies in the planning area or the master planning object structure. the problem is this as I have put in the SAP message:
"We have generated CVCs from a text file using the load work list functionality Due to some internal formatting issues few erroneous CVC were generated. On going through the concerned notes we have come to the conclusion that we would have to delete the erroneous CVC and recreate new CVC.
The issue that we are facing is that we are not being able to delete the erroneous CVC from the MPOS as they are not visible in the display mode. On other hand we do see the erroneous CVC in the planning book, which is not at all understandable because if there are no CVC then why are we seeing them in the planning book."
Please let me know if this is a problem that has been faced by anybody in SCM 5.0
Thanks
Similar Messages
-
my itunes is not letting me restore my ipod and my iphone i dont if that is a bug that itunes is having or its just my computer that is not letting my ipod and iphone restore. please itunes fix this i really need to store my ipod and updated to ios 6.1.2
Please post error(s) noticed in iTunes so that someone can help.
-
hello there, this is really urgent i would like to ask if there is a way to deactivate/lock my Mini Ipad because it was stolen, i hope you can provide me a way to do so, thank you for the support and i really hop you can help me, i bought this mini ipad not too long ago.
Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating and/or remotely wiping it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you haven't already done so then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model you should also contact your carrier. -
Hi Guys,
I am facing problem in BPS Variables.
I created the variables 1.zqbs- employee responsible --->Userentry/default value.
2. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
3. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
ZCONPAR: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_ACTIVIT through zconpar
ZCONPER: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_CONTPER through the zconper.
These two variable info objects are calling in the planning layout lead column.
based on contact partner it should display contact persons for the contact persons we are applying the conditions(bp_reltype = bur001,bp_reldir = 2) to filter the contact persons.
In my case i am getting 3 values for the contact partner like 1000, 2000, 3000.
i am getting 2 values for the contact persons if i run the variables individual.
note: if i run BPS0 its going into loop and displaying multiple data means for 1 contact partner its applying all contact persons. at final it showing records like contact persons X contact partners means it showing more unvalid records.
how to avoid this situation.
contact partner contact person bp_reltype bp_reldir
1000 xxxx bur001 2
2000 yyy bur002 2
3000 zzz bur001 2
it should display like this
1000 xxx
2000
3000 yyy
but it showing
1000 xxx
1000 yyy
1000 zzz
2000 xxx
2000 yyy
2000 zzz
3000 xxx
3000 yyy
3000 zzz
Regards,
Anu..
BW Consultant.Hi David,
I have the coding up and running. I have not seen this error before and don't know how to resolve it. If you cut&paste it from the PDF, then maybe some special characters got pasted into the ABAP editor. Try to delete the line and type it in manually.
Regards
Marc
SAP NetWeaver RIG -
Dear iPhone users,
One of the things who is holding me back on buying an iPhone is the lack of support for rSAP. My car has it to provide phone integration but as far as I know iPhone doesnt support it.
Is rSAP support a hardware or software issue ? Has the iPhone the capabilities to enable rSAP in the future ?
I dont want to buy a WM6 phone ! HELP !
Best regards
Joao CorreiaIt software. Apple will enable it if and when they want to.
Aside from that, there is no information. -
Please help...Its really urgent- Which class to use for this?
Can someone help me with this? I want to read characters from a file
Ultimately I want to load some information from a text file which has information like this:
0123456789
0
1
4
10
X0123456789
01202120212
11202120212
20212021202
I want to load the information from X onwards .. all the rows and columns in a 2D array..
I am not able to read the file at all ...
I tried RandomAccessFile, BufferedReader..... They had problems.....what class sould I use.. any if you can give hints how I can reach X and start reading to 2d array...... It will be really very very helpful........
Please help......Hi...
See this is the partial code
class LanguageRecognizer
String word;
String fileName;
BufferedReader reader;
char transitionTable[][];
char letters[];
char startState;
char endStates[];
int rows;
int columns;
public void getFileName(String fileName_)
/********** Create File Objects to read file ******************************/
try{
this.fileName = fileName_;
java.io.BufferedReader reader = new java.io.BufferedReader(new FileReader(fileName));
/***** Read File **************/
int i;
int X = 0;
/** as long as its not the EOF **/
while((i=reader.read()) != -1)
//Print all characters
System.out.println((char)i);
if (((char)i)=='X')
X = i;
System.out.println("X is at "+(char)i);
}//if
}//while
catch(Exception e)
e.printStackTrace();
/**Call Prompt user and ask user to enter a word****************************/
promptUser();
}//getFileName()When I say
The while loop prints this file containing:
0123456789
0
1
4
10
X0123456789
01202120212
11202120212
20212021202
But it prints it in this format :
0
1
2
3
4
5
6
7
8
9
//Want to take this in the letter[]
0 //want to take this as the startstate
1 // This is the end state which could be more than one so in endState[]
4 // This is the number of rows in the transition table
1 // This is columns
0
//This is the transition table that I want in a 2D array......
X // This is the X printed with the if() in the code
X
0
1
2
3
4
5
6
7
8
9
0
1
2
0
2
1
2
0
2
1
2
1
1
2
0
2
1
2
0
2
1
2
2
0
2
1
2
0
2
1
2
0
2
So I want to capture each letter typed in arrays.......But I am not able to seperate them and get them in my datatypes... atleast not using this class BufferedReader.... so can I use this class and get it or which class can I use?? -
I followed the instructions, the account is authorized, I can see the tracks from my iMac on my MacBook, and I can play the songs, search the songs, etc...
But once the songs are selected, there is no "Import" button at the bottom right of iTunes.
What do I do from here, in order to transfer tracks from iMac to MacBook?Do you see "Home Sharing" on both your iMac and MacBook? Is Home Sharing all set up? Have you gone through each one of the ten steps in the "Home Sharing" section of the article you attched? Are you looking for the "Import" button on your MacBook?
-
HELP! This is really urgent - need Font help
Hi all. I have a Mac Mini Tiger OSX (10.4.8). I run QuarkXPress 5 using the Classic Environment installed at the factory with '~ATM' in the Control Panels folder as part of OS 9.2.2. I use ATM Delux as my font manager. It appears that ~ATM has dropped out of the controls panel folder. Now any job previously created in Quark will only display bitmapped fonts (system fonts seem okay). I have tried to drop a copy of ~ATM back into the Control Panel folder and restart but it appears for a second or to the drops out again. What can I do. I have a deadline!! TJ
There is an "Extensions Manager" Control Panel inside Mac OS 9. This utility can control other system files, like Control Panels, besides extensions. Has the ATM Control Panel been disabled in the Extensions Manager?
-Doug -
I'll ask again... please, someone answer this time.
Ever since I installed a new multimedia keyboard, my iTunes SOUND hasn't been working. But the sound in any other program works fine, so I know it's iTunes and not my computer. I've tried reinstalling iTunes, etc.
Please help, as this is really annoying and I am really frustrated.Janie, Welcome to Apple Discussions. Please be patient.
This is a user to user discussion. Solving your problem requires that another user has experienced your problem and/or knows how to solve it.
Apple staff do not respond to messages here.
You have posted your question in the "Using iPod" discussion. Your problem relates to iTunes for Windows and possibly, to your new keyboard.
Please post your question in the "iTunes for Windows" discussion.
http://discussions.info.apple.com/webx?14@@.68a50588 -
hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue
Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock -
Hi Frds
I am facing a strange problem in BPS variable while executing planning folder
I have cost center restriction 1000 to 9999 in pl package. There is a cost center variable user input enabled. when i execute planning folder i entered cost center range...1000 to 4000 and 5000-9999 by using More button in right hand side....it displays data according to all the corresponding cost center.....
issues
1. In variable screen when i click on cost center variable it shows me both the range 1000-4000 and 5000-9999 but when i click on more button it is showing me only range 1000-4000 although data is displaying for entire range
2. If i click on cost center variable screen and add one more range 4001 to 4500, system consider only these cost centers and ignore other ranges...i don't have option for selecting all the ranges which i have given
is this a prob with BPS ?
Thanks
Tripple kFYI
I got reply from SAP...we need to implement one OSS note 761708
Cheers
Tripple k -
the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.
Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
i'm receiving a message whenever I try to open iPhoto. " can't open application "iPhoto" because it may be damaged or incomplete. Anybody had this issue before?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
next, post in the iPhotos for Mac forum -
My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)
Maybe you are looking for
-
Keeps importing videos every synch
Since I updated to iPhone OS 4.1 Windows Photo Gallery treats all the old videos on the iPhone as new at synch time and wants to import them all again. I let it do it once but then it still wanted to do it next synch, and does so every time, after tw
-
The Messages app doesn't start when I restart I get error -1712 any ideas how i correct it? I'm running Mavericks 10.9.1 on a MacBook Pro 2.8 GHz Intel Core 2 Duo
-
Remote replication - scheduled or continuous? Project-level or share-level?
Hi, I had a lot of problems with RR with the older 2009 firmware, but there's supposedly some improvements to in Q1 2010. Previously, I've been doing scheduled and share-level rep, because any time the connection between the devices was broken, the r
-
Ideas for working around ORA-06502: character string buffer too small on Interactive report
Hello, This is for Apex 4.2. We are trying to create an interactive report. The report is for something similar to a time tracking application. We are trying to concat a comments column while summing the hours. For example, select TASK_NAME, sum(
-
Update records in adressbook in J2ME(NEW TO J2ME)
Hi all, I am trying to update the records in an address book in J2ME, but I can't do it, since there is no UpdateRecord( ) How can I do it?