Issue in calling WebDynpro ABAP iView in UWL

Hi,
We have configured UWL to our ECC system successfully.
In our UWL for a task TS90105432, when the users click on work item in their UWL Inbox, initially UWL launches a standard page in new window. On this page users can see a link u201CNote for Approval Processu201D, when they have to click on this link a web dynpro page needs to launch in new window. But when users click on Note for Approval Process link no action has been triggering / taken place and no error message.
Actually we have created a web dynpro ABAP iView for the TS90105432 - Note for Approval Process in Portal.
Through content admin we can see the preview of Note for Approval Process WDABAP iView. But the problem is not able to call this iView when the users click on Note for Approval Process in UWL.
Shall we need to set any Visualization parameters in SWFVISU? Can you please share your iViews on how we can call this WDABAP iView in UWL
Thanks
Phani

Hi,
There are plenty of instructions & discussions about how to launch Web Dynpro ABAP applications from UWL. Just do some searching.
For example you could start with this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6
After you know the basics, you could ask help for specific steps or something that you don't understand.
Regards,
Karri

Similar Messages

WebDynPro ABAP iView not picking Portal Theme stylesheet

Hi,
We are facing issues in integrating the WebDynPro ABAP application in Portal . The WebDynPro ABAP iView is not picking the portal theme. It is picking its actual color.
We are in EP 6 SP 14.
Can anyone let me know what can be the reasons.
Best Regards
Sid

Hello,
for the web dynpro for abap application you can create a application configuration. To create the configuration
right click on the application -> create/Change Configuration -> and once you create the configuration, it will open up in browser and you can see 2 tabs structure and parameters
In parameters tab you will find an option Force Use of External StyleSheet check the box and save the configuration. Once done with this process.
Go to the iView Properties of the applications and set the application configuration name and it would take the Portal Theme.
hope this helps.
Pramod
reward points if helpful.

Personalization option for Standard Webdynpro ABAP iView

Hello Experts,
We are stuck with an issue on personalizing a Webdynpro ABAP application. Personalization option is available for Webdynpro Java iViews, when we preview the iView from the Administrator's login and do a Control + Right click. This will provide a dialog box where we can personalize the iView. We can do personalization on the existing fields (hiding the fields, changing the text etc). But this is not happening with Webdynpro ABAP iView.
Scenario:
We have a Standard Webdynpro ABAP iView which has 3 rows of links (Row1 - 5 links, Row2 - 2 links and Row3 - 2 links). The client wants only one link in Row1, one link in Row2 and one in Row3. I tried hiding the other links through Personalization. It is not working as am able to see the changes only with the Admin ID. When I assign this iView to a different user and tried viewing the iView its showing all the links.
But the strange thing is that, if I hide the complete row (eg. Row2 both the links are hidden), then am able to see the complete row being hidden with both the Admin ID and also the end user's ID. So not sure where am I missing.
Please refer the link for the Personalization option available for Webdynpro ABAP iView.
[http://help.sap.com/saphelp_nw04s/helpdata/en/46/98ce61f37d19ace10000000a11466f/frameset.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/46/98ce61f37d19ace10000000a11466f/frameset.htm]
Any help in this regard will be greatly appreciated. Thanks in advance.
Cheers
Madhu

Hi Volker,
   Thanks for your reply.
   I think, I have set the properties of the iView right. I have tried with all the options for the property "Launch in new window" property of the iView but it didn't work.
   "By home page framework" I mean that the link of the iView in portal has been created using the "Home page framework" i.e. from "SPRO" transaction in the backend.
   Please let me know if you need any other input from me.
Regards
Mukesh

WebDynPro ABAP iViews not picking the portal look and feel

Hi,
In our case , WebDynPro ABAP iViews not picking the portal look and feel.
Is there any way to provide the custom developed portal theme link or css file to the WebDynPro application.
Can it be done programmatically in the WD ABAP application.
Best Regards
Sid

Look at the below link, it will answer your question:
Re: EP 7 Portal stylesheet with WD ABAP
Raja T

WebDynPro ABAP iView Flickering

Hello Everyone,
This one is weird. I have WebDynPro ABAP iViews created in the portal which rendered fine. But suddenly, the iViews started behaving weirdly - they started flickering, as though the iView is being refreshed again and again so the display never finishes rendering anything. If I put on my headphones, I can hear the tap sound which you hear when you hit "Refresh/F5" on IE. This means for some reason, the iView is automatically refreshed and I don't know why.
If I go to the WebDynPro App URL directly, everything seems to work fine. Also, I created a fresh new iView just to see if my old iViews are messed up, but the new one also flickers.
Did anyone see this? Any suggestions what could have gone wrong between the Portal and the WD app?
Any help is appreciated!
Thanks,
Kiran

Here's the URL
http://<portal>:<port>/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fcom.<company>!2fContent!2f<project>!2fGS!2fiViews!2ftest?sap-config-mode=true
We wondered if the iView started falling apart after some strange logic was added to our WebDynPro ABAP code, so to test this we created a very simple app just displaying a 'hello' message. Even this app fails when an iVIew is created and previewed. The app works fine run directly on se80.
There should be some thing wrong with the portal itself.
Thanks,
Kiran

Webdynpro ABAP iView Blank Page

Hi All
I have created Webdynpro ABAP iView in the Portals by giving following parameters
1) System
2) application name :
3) Name space :
While previewing i am not getting any erros or even i m not expected output also,
Anyone could pls you tell what is going wrong.
How can i check at backend for that application.
Note: I am new to Webdynpro for ABAP.
Help will be appreciated.
Thx & Rgds
-AW

I have created Webdynpro ABAP iView in the Portals by giving following parameters
1) System
2) application name :
3) Name space :
what are the values you have given ??? namespace should be SAP.
ensure that your webdynpro ABAP application works fine. Goto se80-> select Web Dynpro Comp. /intf. and type in you webDynpro COMPONENT name here PRESS Enter key.
you need to know the webdynpro component that this Application is supposed to execute to test it in ABAP work bench.
Greetings
Prashant

WebDynpro ABAP iView

Hello experts.. we are creating several iViews for our portal, all these iViews are from WebDynpro, some of them WebDynpro for Java and some others are WebDynpro for ABAP.
I have successfully created all the WebDynpro Java iViews.
Now I need to create the WD Abap iViews for the portal but I'm having some dificulties... first of all, I need the WD Abap iViews to connect the same way the Java ones.. this means the same user/password -WD Java uses- without asking for authentication... in Java we don't have that problem because the connection is handled by te JCo, but now I don't know how to set this up for their ABAP counterpart. Is it possible? to launch the WDA application without asking to logon, and to use in this case the same user we're using with the WD for Java -the one of the JCo-?
The other problem I'm having is when testing the WDA iView, so far I manually type username and password but I'm getting the following error.
Please check the protocol and host entries for system 'DESARROLLO_ECC'..
We're connecting to ECC 6.0, which parameters do I need to set up in order to get it right?
Any guidance or comments will be welcome.
Thanks in advance..
JV

Hi Valencia,
You will have to configure single sign on (SSO) between the portal system and the system on which you have hosted the WDA applications. This will remove the authentication issue.
w.r.t the error you facing...do check if the WDA system is reachable from the system where ur trying to access the application, when I say reachable try to ping the WDA system
Thanks,
GLM

Open Webdynpro ABAP application from UWL

Hello Experts,
The requirement is we need to open the Custom Webdynpro ABAP application when the user clicks on the UWL tasks instead of ITS based screen.
We have created a custom workflow task. Then we maintained the task entry with Webdynpro ABAP application name in SWFVISU transaction.
After re-registering the UWL connector in Portal I could not find the Task ID in UWL definition. In UWL the task item is visible but could not open the task because the UWL could not identify the task no for this.
Am I missing something in the above steps?
Kindly help.
Kind Regards,
Nirmal Sivakumar G

Any thoughts on this issue guys?

Anonymous user Unbale to access an WebDynpro ABAP iView

Hi,
I have developed an application using webdynpro ABAP and integrated that into portal.
For this webdynpro application i have to create an iview, assigned it to a page, assigned this page to a custom role. I also set Authentication to anonymous for the page and iView. Assinged the custom role created to anonymous Group.
But while running it i am getting an error "An exception occurred while processing your request. Send the exception ID to your portal administrator. Exception ID 04:55_25/10/11_0047_14739050"
When I checked the log, it shows the error as "Deprecated scope of type SERVERSESSION_AT_LEAST_ONE_APP_SCOPE is used! Please replace the usage of scopes with new
mechanism based on "Cross application session communication API".
I also checked the note 1031159 and changed the configurations accordingly but getting the same above error.
I am on EP7.3 version.
Please guide me to move further successfully in showing the webdynbpro abap applicaiton to anonymous user.
Thank you.

Hi,
I'm also working on EP7.3 and R3 WD4A integration. But I just can't find any WD for ABAP from whithin EP7.3 wizard.
I tried to create the WD4A iview by right-clicking a PCD folder and then "New"->"iView"->"iView from remote source" to get a search screen. I choose a system alias (point to bk web as), use "*" as application id, and pick "WebDynpro for ABAP" as the application type.
However, I always got "Nothing found. Change your search criteria."
I did do some activation work on backend R3 SICF setting. I'm able to directly access web dynpro via http://mywebas.domain:8000/sap/bc/webdynpro/mywd....
If you're using the same scenario, please let me know anything I missed or any other special setting.
Thanks

Call WebDynpro Abap application with trasaction

Hello Experts,
can I call my WebDynpro Abap application with a trasaction ?
Regards
sas

hi,
Go through this link
[****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
Hope it will help you.
Regards,
Rohit

WebDynpro ABAP iView not opening in new window

Hi,
   I have created an iView for a WebDynpro ABAP application and I am having a link in a home page from where the iView should open in a new page. I have set the properties "Launch in new Window" and "Show open in new window option" of the iView but still it doesn't open up in a new window.
    Can someone suggest me what's going wrong?
    Will reward points for helpful answer.
Regards
Mukesh

Hi Volker,
   Thanks for your reply.
   I think, I have set the properties of the iView right. I have tried with all the options for the property "Launch in new window" property of the iView but it didn't work.
   "By home page framework" I mean that the link of the iView in portal has been created using the "Home page framework" i.e. from "SPRO" transaction in the backend.
   Please let me know if you need any other input from me.
Regards
Mukesh

ADS Error while calling WebDynpro Abap with Adobe Form

Hi Experts,
I have created an Adobe Form and its interface in Transaction SFP. In a WebDynpro Abap Component I created an UI-element "Interactive Form" with the context of my form. So the WebDynpro Context was created automatically. Then I tried to call the WebDynpro Application in the Internet Explorer but got the error message:
german(original):
WebDynpro Exception: Der Aufruf des ADS schlug fehl. Informationen zur Ursache finden Sie im error.pdf auf dem Applikationsserver.
english:
WebDynpro Exception: The call of ADS failed. You find information in error.pdf on Application server.
How can I call error.pdf and what can that be? One WebDynpro Component with the form runs without any problems, the other one doesn't do this. I have no idea if it is a problem with context or server or something else.
I hope you can help.
Thanks al lot.
Best regards,
Ingmar

Hi,
Check the note in this site...
https://websmp204.sap-ag.de/notes
Regards,
<i><b>Raja Sekhar</b></i>

Customize Webdynpro ABAP iViews (EhP2)

Hi All
From EhP2, SAP is providing ESS business package in webdynpro ABAP. I am about to customize the iViews like hiding some columns, input fields etc. I am able to do it through personalization, but I want it to reflect to all users. So far in Webdynpro Java ESS iViews, we could use Ctrl+right click to do this kind of customization locally, but this is not working with WDA ESS iViews. It would be great if any of you could provide me with some information on this.
Thanks, Raj

Hi Babu
Since you have said ECC5, I guess the ESS should be based on Java iViews and control + right click should work. I was in teh ECC6.0 EPh2 and it was ABAP iViews and to customize it you have to follow the procedure as I have said. let me know if anyting.
If you are using Java iViews, and ctrl + right click does not work, one thought strikes me that you may not be provided with appropriate permission.
Raj

How to call Webdynpro ABAP from Widget

Hello guys,
I want to add an icon to my widget with a link to a webdynpro ABAP application.
However, the link is dependent on the system the user is accessing.
So, I'd like to know if it's possible and what's the best method to do it.
1. is it possible to call a Transcation or a RFC that calls a WebDynpro from the Widget?
or
2. is it possible to retrieve the Widget's default system parameters and assemble the Webdynpro URL dynamically?
Any more ideas?
Thank you and best regards,
Henrique.

up.
Henrique.

FPM Navigation - asking for Log on when calling WebDynpro ABAP Application

Hi Experts,
I want to call a Non FPM based WebDynpro ABAP Application from a FPM Component.
I have followed the method showed in the following thread by Rajkumar to call WebDynpro Application using URL.
[Launch transaction without launchpad|Re: Launch transaction without launchpad]
I could successfully call my WebDynpro ABAP application using this approach,
However when the application opens in new Browser , it asks for log on again.
Can anyone help me to avoid this log in screen.
P.S. --> Both the applications are in the same server.
Regards,
Ashish Shah

Hi Ashish ,
I am also facing the same problem , did you find any solution ?
Thank You,
Aman

Issue in calling WebDynpro ABAP iView in UWL

Similar Messages

Maybe you are looking for