Issue in Cheque Printing using Laser Printer

Hi,
There is a requirement wherein cheque needs to be printed from F-58 using Laser Printer.I have created the custom page format for Cheque printing .Attached it to the custom device type that i have created(Copy of Device type HPLJIIID).Aslo i have attached the page format to the tray1 of the 'Tray Info' tab of Output devices in SPAD.
I am getting the print information correctly on the cheque but what happens is that the Printer gives an error message saying'Jam in Fuser Area' and the cheque has to be taken out of the rear door of the printer,it doesn't come out automatically.As a result for
printing the next cheque, printer has to be restarted.
Require your help on this.
Regards
Vinod

Hi All,
Forgot to mention one thing.I am making use of script ZF110_PRENUM_CHC (copy of standard script F110_PRENUM_CHCK)
for cheque printing.

Similar Messages

Different btn dotmatrix print and laser print

hello sap experts
how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
thanks in advance
regards
Jenny

Hi,
Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
Refer note:724904 for instructions printing in sap b1using dot matrix printers.
More over you have to set the alignment(as often it gets changed).
And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
I suggest you to go for laser printer if it is affordable by client.

How to enable frontend printing using Adobe Print Forms

Otto Gold at the forum "SAP Interactive Forms by Adobe" gave me the tip that Sandra Rossi in this forum might help me out. Here is the link to my original thread How to enable frontend printing using Adobe Print Forms
My question was:
Hi Experts!
Did anyone of you manage to enable frontend printing using Adobe Print Forms? In order to save administration effort we use frontend printing in our ERP system. We just changed some SMARTFORMS to the new Adobe Forms technology. Now we learned that direct frontend printing does not work with these forms.
Any help will be very much appreciated.
Kind Regards,
Gerald

I think you'll be disappointed by a rather negative answer but I'll try to explain everything I know (or think I know) the best I can
The simplest solution is to do a preview, and print from Adobe Reader! (as I could see on one project, users have to display one more dialog than usually to print) It's the best workaround according to me.
How Adobe form printing works:
When you print an Adobe form from SAP, a printer language (PCL, PS, ZPL, PDF) is retrieved from TSP0B table according to the device type, ADS (Adobe Document Services, installed in the SAP java stack) is then contacted to generate the form: a file corresponding to the printer language is generated and sent back to SAP (there are also 2 other little files but it's of none interest here). SAP stores it as a file (named SPOOL...) in the global directory (DIR_GLOBAL when you use AL11 transaction).
When you ask SAP to print it, it sends the file as is to the printer.
Note: when you ask SAP to display the spool, SAP sends a request to ADS which will send back a PDF (binary stream which is not stored on disk, just displayed on frontend).
How frontend printing works:
If you want to print a normal spool via frontend, SAP doesn't know the language of the printer you will choose. SAP sends the spool in a format named SAPWIN to a frontend program named SAPLPD, it converts the SAPWIN format into GDI, a Windows format that is understood by all printer drivers, and it is sent to the printer driver (you have selected) which converts the GDI format into the printer language.
Any workaround?
First possibility would be that ADS converts the PDF into SAPWIN format (by creating an Adobe .XDC file at the ADS side). SAP says it's not possible in Note 685571 - Printing PDF-based forms. As I understand, SAPWIN is a very simple language compared to PCL for example, so it is very difficult to convert a PDF to SAPWIN without losing much information. There's a SAP note about the SAPWIN language if you want to check.
Second possibility is to print directly the PDF through Adobe Reader: you get the PDF from ADS, download it to the frontend (easy), and execute directly Adobe Reader print function. Unfortunately, I don't know if it's possible. Moreover, we should enhance the standard SAP print dialog...
Third possibility is the one I recommended at the beginning of this post

My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

Issue with character formats using duplex printing in smartform

Hi all,
I am getting a problem with character formats using duplex printing in smartform. I am using a text module with a bold character to display text in a window. The problem is that on the first back page,the text is being printed normally (without bold), but on the next pages, the back pages are being printed with the bold character format.
Can anyone know where is the problem..please.
Points to be rewarded..
Thanks.
Regards,
Zaheed.

Hi Zaheed,
Normally this should not happen.. and also there is no internal formatting done by SAP.. it will show based on what fomatting option we have specified..
If you are saying it is happening in ur case then
     1. Recheck whether whether you have same text module getting printed on the
         two page. If they are different then then individual check formatting option for
         each..
      2. If above point does'nt work for you ..then instead of bold char use normal
          format for text element and see if it is printing same on both page..
Try this out and let us know your findings...
Enjoy SAP.
Pankaj Singh

Dot Matrix Print to Laser Print

Hi
ZQM_INSP_RESULT this Program Gives Out Put in Dot MAtrix Print Format.
but I want it the Report in Laser Print Out....
How to Do This?
I gone through the program bt im not Understanding aything...
Can Anybody help me on this?

hi,
cn you please check this link
it would helpful to you
Print out issue in PO
Thanks and regards
Durga.K

Print with laser printer

Hi everyone,
I'm developing an application that should print its JTexPane with 'Arial Unicode' font. I use a styled document. When I print with a deskjet, there isno problem ,my text is perfectly rendered.
But, when I print with the laser printer, the text is always in bold. This printer doesn't accept 'Arial Unicode' in its properties. I have to be able to print unicode font (chinese, ...) and the printer doesn't have any unicode font in its settings...
Is there anything I can do ?
Thank you.
Pascal

I am also experiencing similar problems. I am trying to print a JEditorPane rendered HTML-document. On screen it looks good, but when sending it to either a PDFCreator or printer, bold and italic text looks really wierd. Does anyone have a solution to this problem?
I can post some code or the PDF file if someone wants to see it.
Thanks in advance.
Magnus

Printing to laser printer looks terrible

Ever since PS CS3 I've noticed that when I print a 300 dpi grayscale image to my laser printer directly from Photoshop, it comes out as if a 72dpi benday screen had been applied. Never happened in earlier versions. I used to get excellent black-and-white print quality through Photoshop, just using the default settings.
I have 300 or 600 dpi grayscale images, usually with a lot of clean black lines. But whether I set to "printer manages colors" or "Photoshop manages colors", and no matter what profile I select, I get the same halftone (awful) result on my HP Deskjet 3330. The printer's settings are fine. If I print the same image from any other application, such as Quark or MS Word, the print quality is fine.
PS has always been a bit confusing to me regarding printing settings. Can someone tell me a way to get my 300-600 dpi images to print properly, without halftones applied?

Of course the first thing I did was check my printer settings. This is what baffles me. I have only one printer setting which I set up as default for all programs, including Photoshop. In CS2 and earlier versions, anything printed from Photoshop came out exactly like prints from any other app: 600dpi fine quality. But now (since CS3) ONLY Photoshop printouts come out in this 72 dpi halftone. Using the same default printer driver settings when printing from Flash, Word, Corel, Quark, IE, Firefox, I get fine quality printouts.
This is why I am asking for advice! Obviously there is a setting within Photoshop that I am doing wrong. Probably something obvious.
Please treat me like I'm stupid. How do you 'check halftone settings in Photoshop'? is that dot gain? I have print settings for 'grey dot gain 20%', which is what I've seen it set at since I started using Photoshop 3.

Printing using a printer connected to a router - IP Printing

Greetings:
I am trying to assist a friend of mine with a technical problem. Let me first describe the environment:
- US Robotics MaxG router with wireless network and USB port to plug a printer.
- MacBook Pro with Tiger 10.4.11
- Canon MP210 printer.
Some basics:
- Printer works fine if attached to USB.
- Connectivity between MacBook and router is fine - in facts no problems to surf the Internet.
Problem:
We connected the Canon printer to the USB port on the router. The router configuration software indicated us the printer address: http://192.168.1.1:1631/printer/canon, it also indicates the printer is ready.
On Tiger we used the IP printing to configure. The problem is that there is no clean mention on how to write the address, we tried this:
- http://192.168.1.1:1631
- http://192.168.1.1:1631/printer/canon
- 192.168.1.1:1631
- 192.168.1.1
Once entered, the printer is all the time off-line - no communication with it.
To further complicate the things, the MP210 driver is never listed in the pulldown menu for available printers, despite the printer package has been installed.
Did anyone come across this problem before?
Best regards
Claudio

The issue you are having is partly a driver issue. You must use a CUPS driver to use the standard CUPS network protocols in OS X. I think Canon released a CUPS driver in December for the MP210 - do you have that?
Then, about the address. USRobotics uses a non-standard port for the IPP protocol. Usually it's :631, but you'll notice that it's :1631 for USR. To do that in OS X, you need the "Advanced" protocol selections. In Printer Setup (10.4), click Add, then hold down the Option key and click More Printers. At the bottom of the first menu you will find the new item Advanced. Select that. Then in the second menu, you will find Internet Printing Protocol using http (or IPP - on OS X these are identical). Enter the URI:
http://192.168.1.1:1631/printers/canon -- in this case canon is the queue name.
HTH

Print to laser printer without having overprint.

I have a document with an overprinting element and want to print to a laser printer but the top overprinting element is showing everything underneath. How can I print this and have it show up as seen on screen without the overprint showing?

To farther complicate things, I print "as Image" on my mac using Acrobat 8 and the document prints as on screen without showing the overprints. When I go to a Windows machine using the current version of Acrobat Reader and print "as Image" the overprinting shows up on the laser.

IMac G5 no longer prints to laser printer over ethernet network

I have a small office with 6 iMacs networked via ethernet with a Netgear Router. Printers are connected to one machine and people send to print over the network.
3 iMacs are G5. 3 are Intel. All run OS X 10.5.8.
A month ago one of the G5 iMacs stopped being able to print to a Brother laser printer (which is connected by USB to an Intel iMac). I believe this happened after we downloaded a periodic Apple update. About 2 weeks ago a second G5 iMac developed the same problem. The 1st G5 iMac still prints fine to an inkjet printer connected directly to it by USB.
We have tried re-loading drivers, but no improvement.
Any suggestions as to how we can resolve this?

Hi DaddyPaycheck
The iMacs that can't print can see the printer. We have deleted and re-installed via the printer system prefs too. There weird thing is that you can select the printer and send to print, but for some reason the printer then automatically pauses and you can't resume it. The file is listed by the status is 'stopped'. When you open the printer queue on the Intel iMac that the laser printer is connected to, no print file shows up at all...
We also ran the network diagnostic that you can do when in printer system prefs and that reported that "the G5 iMac could connect to the internet, but not the Server "brother HL 4040CN series-1@ben's-iMac-2.ipp.tcp.local" "
Hope there's a clue in there somewhere...
R

I cannot print any kind of document using the File Print command on the tool bar of any application, but I can print using the printer icon. OS X 6.8 with HP Photosmart printer. Any thoughts?

When trying to print any kind of document on my wife's Mac Pro, the File>Print Command will not work. She just downloaded an update to Microsoft Office and the problem began after that, but it also applies to other non-Microsoft Applications. However, the print function does work when you use the printer icon in any of the applications. She has OS X 6.8 and an HP Photosmart printer. Thank you for any thoughts.

Did your wife also apply the Feb. 2 Security Update 2012-01 v. 1.0 from Apple? That update contains a bug which disables printing and some other functions in applications that were originally written for the PowerPC processor and which require Rosetta to run on Intel Macs. Fortunately, yesterday Apple released v. 1.1 of the update, which resolves the problem. Run Software Update again to install the revised update.

I cant' print using firefox. print preview won't display, won't print, printing dialog box won't display, etc

Seems like since I updated to firefox 5 I can't print web pages, print preview won't work. I click on the print option under file and nothing displays or prints.

Try the Firefox SafeMode and see if you can initiate printing from within Firefox. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Can't find my printer using Air print

Can't find my HP Photosmart C4783 printer in iphone using Air print
Can anybody help please

iOS printing works to printers that support AirPrint. Right now only HP has AirPrint printers on the market. There are 18 of these printers:
http://support.apple.com/kb/ht4356
According to MacWorld:
http://www.macworld.com/article/155674/2010/11/airprinters.html
other printer makers are looking at making these printers.
As to commonly purchased printers:
http://www.zdnet.com/blog/btl/hp-grabs-printer-market-share/38724

Spool printing using multiple printer trays.

Hello,
Has anyone printed the same SAP spool using multiple printer trays? For example, the spool has 3 pages, the first page use tray 1, page 2 and 3 use tray 2. How this can be accomplished?
Your input is appreciated.
Regards,
Sue

Hi Sue,
Please go through this doc..
http://help.sap.com/saphelp_erp2005/helpdata/en/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
cheers,
Prashanth
PS Please mark helpful answers

Issue in Cheque Printing using Laser Printer

Similar Messages

Maybe you are looking for