Issue in Creating BO Search Object Connectors

Hello,
We are in process of configuring the Enterprise Search in our project.
1. The Enterprise Search is available in ERP 6.0 , Netweaver 731 system
2. To the above system we are planning to connect a SAP ERP6 system ( SearchProvider).
3. We are using the following configuration guide.
Creating BO Search Object Connectors - SAP NetWeaver Enterprise Search - SAP Library
Issues we are facing :
1. The Administation cockpit screen does not have the options to connect the backend system.
2. Also, there are no BO search variants available in Cockpit for Step - 'choosing the SAP BO Search Variants'.
3. Also, for some of the steps provided in the guide for creating BO search object connector , there are no options available to proceed.
Is this due to some non-installation software pack not available for Enterprise Search in our SAP system where Enterprise search implemented,
or any user authorization problems?
Could you please help us in the above queries.
Regards,
Hari.

Hi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun

Similar Messages

Problem deleting search object connector template in template modeler

Hi Experts
By mistake I have created same search object connector in two different software components. Now in adminstration cockpit, template modeler when I try to create a connector, error message is displayed about the conflict in of same object names. Now I want to delete the business template under ESH_COMMON_OBJECTS, which I am not able to do. Please help me out
Thanks in advance!!
Goutham

I resolved it. if delete is disabled,we can delete or rename the template after selecting the option 'resolve conflicts' in 'actions' dropdown. But even this didn't work with ESH_COMMON_OBJECTS templates, so I have created new template with different name.

Issues while creating a search project in BCC

Hi There,
Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
Step #3.Adding a Content with this info:
          Content Name: Catalog
          Type of Content : ATG Repository
          IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
          Host name : localhost
          RMI : 10160 ( RMI port of commerce instance)
     Creating a content & getting the message as New Content "CatalogTest" has been created.
     Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
     Issue #2: Getting error for "Default Text Processing Options"
     You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
Also attached the full server logs as commerce-server.log & publishing-server.log.
Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
Thanks in advance!
Mani
Edited by: user11263665 on Apr 25, 2012 10:38 PM

We faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
point to FakeXADataSource. FakeXADataSource should point to the administration database, and
FaxeXADataSource_production should point to the production database. Note that some product
installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
pointed at the production database, so you may need to change the FakeXADataSource between installations.
once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
<ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
-repository /atg/searchadmin/SearchAdminRepository -import
<ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
xml

Create new search object for simple/embedded search

Hi,
SAP CRM contains indexing and search functionalities based on SAP Netweaver Enterprise Search. SAP delivers search models, connectors and search abilities for a lot of CRM objects, like Accounts, Contacts, Opportunities, ...
However, some objects like "Service Requests" (BUS2000223) and "Tasks" (BUS2000125) are missing.
Has anyone tried to perform a complete extension of the whole process including template modeling, change pointers (for delta indexing), enhancing UI to provide search abilities for these objects, and so on?
I found different kind of information on how to create a new search object template, however, no further details about what comes after, e.g. how to index, how to handle change pointers for delta, what to do in the CRM web UI to provide search ability and result lists...
Many thanks & regards
Wolfgang

Hi Ralf,
there is a new Book avaliable "mySAP CRM Interaction Center" from Thorsten Wewers and Tim Bolte. Currently it is only avaliable in german. But as I've seen from your Business Card that should be OK. There is also a Chapter about extendig the Search in IC WinClient.
Regards
Gregor

Issue while creating a search page..

Hi,
I am trying to create a search page.
The requirement is:
Searching a SponsorDetails by Name.
I am having a data control getSponsorByName, which is created from web service proxy.
I created a table out of return object from getSponsorByName method. And passing pageflowScope parameter which i am setting at runtime.
The idea is in search form, on entering sponsorName and click on Search button i am setting the enter sponsorName to pageFlowscope and calling dataControlBinding.
But when i open the search page at runtime, getSponsorByName method getting called and returning error message. I am not setting any parameter at. How to stop fetching data onload of table. I want to get data on click on search only.
Thanks
Thoom

See this:
http://blogs.oracle.com/shay/2010/08/delay_method_execution_when_us.html

Creating Multiple Resource Objects for OOTB Connectors

All,
I am trying to create a second AD User resource object for the OOTB connector. I would like to think that the AD Connector (and all connectors, for that matter) was designed to handle the creation of multiple Resource Objects for the same Resource Types, but am I wrong? It doesn't seem like the OIM Connector can handle this easily.
Has anyone created multiple resource objects for a connector? Is this a fairly simple task, or will it require a large effort? Is it even possible? Any pointers?
Thanks!

I will provide a little help with the duplication. I found the best way to do it is to import the original connector. Go through the different pieces making each one have a unique name, that is not part of any of the other piece names. You need to have unique names for the following:
1. Resource Object
2. Process Definition - Provisioning
3. IT Resource
4. Form - Process
5. Scheduled Task
After you import the connector, rename each of the following to something unique. I would also update your process form to have a default value of your IT Resource, as well as your scheduled task values to point to the new unique names. Export the 5 items, no dependecies. The adapters will all be the same. Use find and replace for the values and then import the new XML. If it works, duplicate the XML for each of the new workflows you want to create.
-Kevin

Is creating an entity object expensive for wrapping search values..

I am trying to create a very robust generic method that searches for entities that match the fields according to a enum of search types.
The easiest way I find is to wrap all the values into an instance of the entity class so that testing can be done on field values expected to be present.
So the question is if creating an entity object for the sole purpose of wrapping search values is considered expensive?

yawmark wrote:
User has the ability to search for a number by simply providing a number and then choosing to find all numbers that match, or especifically just a home, work or cell number that match.That requirement doesn't make any sense to me. Can you please elaborate on that use case? I understand phone number reverse look-ups, but those are typically looking for a person or business. One typically wouldn't search for a number by providing a matching number.
~But one could...
I think a point is being missed here and therefore I need to discuss a new design pattern I am using...
1) I create a entity class as per usual but I break a o-o rule with encapsulation. All of my fields are protected and not private. This allows me to create a subclass of the entity and inherit the members so that they can be used for the function of this class. The sole purpose of this subclass is to put an o-o framework around a String[] of search criteria provided according to the type of search to be done.
2) The method in my interface for finding is now extremely robust and is defined as follows...
@Local
public interface DBLocal<Entity, RecNo, T extends Entity> {
     * Retuns a List of all {@code <Entity>} records that match the search
     * criteria based on the type of search.
     * @param entitySub the entity subclass object that contains the values
     * to be used in searching. These values <b>must</b> be in
     * the correct fields in order for the search to be accurate. Eg: If a
     * request is done to search for all records that have names that match
     * according to a persons name, then a <code>getName()</code> method on
     * the {@code entity} subclass would be expected to
     * <ol>
     * <li> not return null
     * </li>
     * <li> Return the value "Tom" if the user wishes to find all records
     * that have the name "Tom".
     * </ol>
     * @param typeOfSearch the <code>SearchType</code> that is to be done.
     * @return a List of all {@code <Entity>} records that match the search
     * criteria based on the type of search.
     * @see phonebook.util.SearchType
     * @throws IllegalArgumentException if the search criteria provided is
     * incorrect for the type of search requested.
     * @throws DataAccessException if an underlying error causes the search to
     * fail.
    public List findBySearchType(T entitySub, SearchType typeOfSearch)
            throws DataAccessException;As you can see I am aiming for an interface that I can use as a utility class. Type T is a subclass of the entity that this interface is mostly being used for and will always be a subclass created specifically to hold the search data. The SearchType is an enum that contains an enumeration of the search types allowed.
Yes it may not be normal to provide a phone number and then search but I have seen this functionality where one can go online and do a search based solely on the number entered. Anyway I thing I found a design that is reusable now and my problem is solved.
Many thanks
Yucca
Edited by: Yucca on Jul 17, 2009 8:33 PM

When I create a scorm object there is one issue with browser IE and one error message appairs

Hi at all,
I have one great problem with IE browser.
My name is Dario and I work for one italian's society that occupated to training for employees.
Now I have created any scorm objects with several parts of video of 14 minutes each one.
When I use Chrome or Firefox I have no problem and all work fine. But with IE (many versions for example 8,10,11) there is one issue.
When the user has finished to watch all videos, close the window and one window's error appairs with this wording.
commit failure: typerror: impossibile recuperare la proprietà first child di un riferimento nullo o non definito
xml parser error:
code= -1072896682
reason= non valido al primo livello del documento
line=1
srscText= malformed request
xml_file= malformed request
What's the problem? How Can I solve?
I am desperate, I hope that everybody help me
Thanks a lot
Best regards
Dario

Re: filtering with merged cells
I suspect you just added some merged cells that span more then one row.
The best solution is use a backup copy of your workbook from a previous day and to stop merging cells.
Centering text across columns creates an appearance similar to merged cells and doesn't cause problems.
If you don't have a workbook backup copy and can confirm that the problem is caused by merging multiple rows, I have a possible vba code solution for you.
Jim Cone
Portland, Oregon USA
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Issue while creating Authorization Object

Hi,
I am in the processing of creating Power user roles. Everything seems to be working fine. But when I am trying to assign the Authorization object which is on 0PLANT its not giving me the proper results. I have followed the below process:
1) Created a Authorization object on 0PLANT and provided one plant value (eg ABC) under Value Authorizations.
2) Created a role and assigned this authorization object. Assigned this newly created role to Power User.
3) Created a report and executed with power user ID.
When I executed the report with power user ID I am expecting to see only ABC plant value. But here in my case I am able to see all the plant values.
Can somebody help me.
Thanks in Advance,
Shanthi.

Hi Rayudu,
please refer to SAP note [1151136|https://service.sap.com/sap/support/notes/1151136] that provides some helpful information how to use BAPIs in RE-FX.
Furthermore I would suggest to try out the following:
- Create a rental object manually with CO settlement rule
- Use BAPI_RE_RO_GET_DETAIL to read the data
- Check the fields that are filled for structures for CO settlement and check if you have filled the fields for BAPI_RE_RO_CREATE the same way.
Hope this helps.
Regards, Franz

Issue in creating dev plan in talent management specialist role

Hi ,
I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
Tarun

Hi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun

Issue in creating a custom data model from BP

Hi Team
We have a requirement to create a custom data model by copying data model BP. I have successfully created new data model ZP . I have copied the UI for searching from BP. Issue is when i search a business partner ideally it should not display any entries because i have just created the data model, But it is taking entries from BP and getting displayed. Please let me know how to map data model to search UI. I dont see option USMD_MODEL here

Hi Imran,
actually that is not an issue but a designed feature. I'm afraid that you need to re-think your whole project. The explanations is rather simple:
Data model BP in MDG is a so called Re-Use Area data modell. This means that active data (records that are currently not stored in a change request) are saved in existing SAP ERP data base tables like BUT000 for the business partner master data and LFA1 or KNA1 for Vendor or Customer master data.
If you copy data model BP to ZP you still refer to the same active area. You will always find the same active objects - no matter which data model you are actually using for the user interface. The only difference wil occur for objects being currently processed in a change request. In that case a separation between BP and ZP is possible. But this won't help to solve your issue.
From SAP side I can only recommend not to copy BP but to find a different way of integrating your project needs into BP.
Best regards
Michael

Error while creating a system object for R3 in portal

Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AM

I created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj

Issue in creating OPSS Schema with rcu.

Hi,
There is an issue in creating the OPSS schema in oracle DB 11.2.0.3.0 even though the rcu (Oracle Fusion Middleware Repository Creation Utility 11g (11.1.2.1.0)
   completed it without any error with status of success opss schema at the end of it's creation operation.
      But the validation of opss schema is getting Failed as shown by this query ! I 've refferenced this Doc's Configuring the OPSS Security Store
SQL> desc jps_dn;
ERROR:
ORA-04043: object jps_dn does not exist
There is no error in rcu log And in opss.log as well. Also There is NO issue in createing the Other schema's like OIM,OAM,OAAM
    Wonder what am missing here that causing the shema not reflecting or Validation of it getting Failed in the database.
     Also i 've tried by changing this sec_case_sensitive_logon value to False from true in the DB but to no effect.
     in both cases the OPSS schema validation is getting failed.
     Greately appreciate any suggestion.
Please see the following summary of rcu operation
Repository Creation Utility: Create - Completion Summary
Database details:
Host Name                       : ebs.oracle.com
Port                            : 1521
Service Name                    : IAM.ORACLE.COM
Connected As                    : sys
Prefix for (prefixable) Schema Owners : DEV
RCU Logfile                     : /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/rcu.log
Component schemas created:
Component                       Status Logfile /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/opss.log
Oracle Platform Security Services               Success
Please suggest.
Thanks
Priya

Hi,
Thanks for the response Hussein and Helios,
   I am able to solve the issue as it was due to incorrect rcu version.
But I am really struggling to Configure Policy store for the last 10 days with the following Error. I would be highly obliged if you could guide me on this issue.
I am getting stuck at this Error while running configureSecurityStore.py. for the error I 've refferenced these Metalink Note ID's
But to No Avail.
configureSecurityStore.py Fails With ORA-00001: unique constraint (DEV_OPSS.IDX_JPS_RDN_PDN) violated. (Doc ID 1547423.1) (1549203.1)
   Summarining
   The steps that I 've followed
1. Created the Schema's Using rcu 11g (11.1.2.0.0) on 11.2.0.3.0 Oracle DB. (OS :RHEL 64 bit)
2. Insatlled Weblogic 10.3.6
3. Installed   Oracle Identity and Access Management 11g (11.1.2.0.0) And SOA 11.1.1.7.0
4. Run config.sh to create OIM,OAM and OAAM domains
5. Run setDomainEnv.sh from user_projects/domains//bin
After that I tried to Configure the DB Policy store before starting the Admin Server. But getting the same error. every time it get failed
I 've dropped schemas and Reinstall the WLS,IAM,SOA software again But got the same Error.
at least 20 times in the last 10 days I 've Dropped schema even created New DB and Reinstalled All the IAM Software But to No Avail
Please see the following Exact Error. And I would be highly Obliged if you could drop few lines as what I am missing here in the entire process.
[oracle@ebs Middleware]$ /oracle/Middleware/oracle_common/common/bin/wlst.sh /oracle/Middleware/Oracle_IAM/common/tools/configureSecurityStore.py -d /oracle/Middleware/user_projects/domains/IAMDomain/ -c IAM -p welcome1 -m create
CLASSPATH=/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adfscripting.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/igfwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar:/oracle/Middleware/utils/config/10.3/config-launch.jar::/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Info: Data source is: opss-DBDS
Info: DB JDBC driver: oracle.jdbc.OracleDriver
Info: DB JDBC URL: jdbc:oracle:thin:@ebs.oracle.com:1521/iam.oracle.com
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:35:36 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] seedSchemaAndCreateDIT - done
Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
INFO: Migration of Credential Store data in progress.....
Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
INFO: Migration of Credential Store data completed, Time taken for migration is 00:00:00
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:35:41 AM oracle.security.jps.internal.config.ldap.LdapKeyStoreServiceConfigurator schemaCompatibleHandler
INFO: Keystore schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] seedSchemaAndCreateDIT - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] checkServiceSetup - done
Sep 26, 2013 1:35:45 AM oracle.security.jps.internal.config.ldap.LdapPolicyStoreServiceConfigurator schemaCompatibleHandler
INFO: Policy schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] seedSchemaAndCreateDIT - done
WLS ManagedService is not up running. Fall back to use system properties for configuration.
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
INFO: Migration of Admin Role Members started
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
INFO: Migration of Admin Role Members completed in 00:00:00
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.config.ldap.LdapAuditServiceConfigurator schemaCompatibleHandler
INFO: Audit store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] seedSchemaAndCreateDIT - done
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.audit.AuditServiceImpl registerInternal
WARNING: Cannot register to audit service for component "JPS".
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
INFO: Migration of Audit Store data in progress.....
Sep 26, 2013 1:36:51 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
INFO: Migration of Audit Store data completed, Time taken for migration is 00:00:50
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] testJpsService - done
persist to output: /oracle/Middleware/user_projects/domains/IAMDomain/config/fmwconfig - done
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSetup - done
Sep 26, 2013 1:36:55 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] seedSchemaAndCreateDIT - failed JPS-10000: There was an internal error in the policy store.
Exception in thread "main" java.lang.RuntimeException: JPS-10000: There was an internal error in the policy store.
oracle.security.jps.internal.api.common.JpsCredentialStoreLdapNodeCreationException: JPS-10000: There was an internal error in the policy store.
     at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:303)
    at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
     at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
    at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.runConfiguration(LdapServiceEnabler.java:484)
     at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureCredentialStoreService(LdapServiceEnabler.java:232)
    at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureSecurityServices(LdapServiceEnabler.java:170)
     at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:129)
Caused by: oracle.security.jps.service.policystore.PolicyStoreConnectivityException: JPS-10000: There was an internal error in the policy store.
     at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.handleRollbackException(JpsDBDataManager.java:1345)
    at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1508)
     at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransactionInDoAs(JpsDBDataManager.java:1475)
    at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransaction(JpsDBDataManager.java:1466)
     at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
    ... 6 more
Caused by: javax.persistence.RollbackException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
Error Code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
     bind => [3 parameters bound]
Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
objectclass = top, EntryId = 11437:Attribute RowId = 45350
objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
cn = CredentialStore]})
    at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:102)
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
    at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$8.run(JpsDBDataManager.java:1487)
     at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1492)
    ... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
Error Code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
     bind => [3 parameters bound]
Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
objectclass = top, EntryId = 11437:Attribute RowId = 45350
objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
cn = CredentialStore]})
    at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:840)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:906)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:592)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:535)
     at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecuteCall(AbstractSession.java:1717)
    at org.eclipse.persistence.sessions.server.ClientSession.executeCall(ClientSession.java:253)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:207)
     at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:342)
     at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:162)
    at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:177)
     at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:472)
    at org.eclipse.persistence.queries.InsertObjectQuery.executeCommit(InsertObjectQuery.java:80)
     at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithChangeSet(InsertObjectQuery.java:90)
    at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
     at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
    at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:844)
    at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:743)
     at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
    at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:85)
     at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2871)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1516)
     at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1498)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1449)
    at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:224)
     at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsForClassWithChangeSet(CommitManager.java:191)
    at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:136)
     at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3799)
    at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1415)
     at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:636)
    at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1505)
     at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitRootUnitOfWork(RepeatableWriteUnitOfWork.java:267)
    at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitAndResume(UnitOfWorkImpl.java:1143)
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:84)
    ... 12 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
    at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1044)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3674)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1354)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:831)
     ... 45 more
    at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.throwExceptionWithStackTrace(LdapServiceEnabler.java:145)
    at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:137)
Error: Failed to initialize security store.
Error: Create operation has failed.
[oracle@ebs Middleware]$
Also OPSS schema is FIne as it's get validated by this query.
SQL> select * from JPS_DN where rdn like '%cn=credentialstore%';
   ENTRYID
RDN
PARENTDN
      3004
cn=credentialstore
cn=oracleschemaversion,cn=opss,
      5004
cn=credentialstore
cn=jpsroot,cn=jpscontext,cn=iam,
   ENTRYID
RDN
PARENTDN
Please suggest.
Thanks
Priya

Error while creating new entity object.

Hi all
I'm using Jdev 11.1.1.3. I want to create an entity object and Jdev issues an information error saying "Either this is not a valid name or an object with that name already exists."
I found that if the package I'm targeting for the new entity is called "com.test.model.whatever" I cannot create a EO called "Whatever".
I can't find any reference in the fusion developer guide that constraints the entity names to be allowed.
Is there a way to circumvent this issue or is this the way it should be?

Sudipto and Suresh, thank you very much for your replies.
I know that changing the package or entity name would work, but was expecting some other kind of workaround, something like giving a full qualified name on some xml or something to avoid the name clash or whatever the problem is.
I do not like packing all the entities together as it goes against my best practice of packing things that change together on the same package. Also I don't like suffix or prefix class names as it goes against my best practice of short descriptive names.
So well, I will have to tinker the names some more and meet you guys half way.
I will now mark this thread as answered, thanks again.

Error while creating Vacancy requisition object (NB) after upgrading EHP4

Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
Sreelatha

Hi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy

Issue in Creating BO Search Object Connectors

Similar Messages

Maybe you are looking for