Issue in creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshots.
Any pointers will be highly appreciated.
This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
Hope that I will get any pointer in EWM forum.
http://scn.sap.com/thread/3609441
http://scn.sap.com/thread/3610822
With Regards,
Malay

Hello Malay,
Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
If it is a some custom development, your ABAPer can help you on the logic behind it.
Else, Let us know.
Regards,
Sathish

Similar Messages

Issue during creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshot.
Any pointers will be highly appreciated.
This thread is further to the thread in Production Planning Forum
http://scn.sap.com/thread/3609441
With Regards,
Malay

Manish,
I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
Br
KK

Creation of control cycles for lean WH

Hi All,
Is it possible to create control cycles (backflush) for LWH, if so how?

HI ,
There is one more way to create control cycle.
1. PK05 - create supply area ( earlier explained the procedure)
2. PKMC - enter plant - go to change mode ( click on change icon ) - in the right hand window - you can see the create / copy icon.
3.click on create icon
4.select option - classic Kanban or event driven kanban
5.enter material/ plant/ supply area.
6.enter no of kanban / qty.
7.In replenishment strategy - select appropiate option ( in our case it is stock transfer)
8.enter - the tab will change from replenishment strategy to stock transfer.
9.enter storage location.
10.enter destination- storage type- bin
11.enter if any additional data required to enter.
12. save- control cycle will get generated.
thanks
Om

Kanban - Control cycle

Hello all!
I am trying to create a control cycle for Kanban in my test system. I have created replenishment strategy in Customizing for Kanban and this was transferred all to my test system. When I want to input the address for a vendor it says: Replenishment strategy in plant ... does not exist.
I suppose there must be a problem with my Replenishment strategy which I have created in Customizing for Kanban. I was not sure about what I need to specify. I have specified plant, type of Procurement:it is an external Procurement, working with Scheduling agreements, Order type - LP, GR - 101, Signal lock- 0. These are all information, which I have specified I was not sure about the rest.
Please could anyone help me ??

Hi,
I answered to few of the threads, hope it will help you, if required any further info please let us know.
Re: Implementing KANBAN-WM
Re: Creation of control cycles for lean WH
thanks
Om

Issue with control cycle

Hello all,
Can somebody please tell me how to find who created a particular control cycle?
Is there a way to find the id of the person who created/modified a control cycle?
If yes, please tell me.
Thanks and Regards,
Umakanth.

Hi
Use Transaction AUT10 with T-codes PK01/PK02.
Give the period for which you want to find changes.
keep the changed by field open , i.e dont put your user id there.
and execute, you will get list of all changes done through creation or chage transaction of control cycle.
check it out and revert back for further discussion.
Hope it helps you.
regards
Ritesh

Manual Staging in control cycle TR creation WM/PP integration

Hi,
We defined Material Staging Indicator as 4 in Control Cycle
How do we trigger TR for this materials ly??? Do we need to create TR manually? OR any transaction which will allow to create TR automatically for desired quantities
When i go to Change production Order and WM pick list Requested quantiry/confirmed Quantory is Blank only requirement qty column has values
How i can enter quantities manually and trigger TR
Can i have in Prduction Order few materials manually staged and few option 1 [pick parts]

Let me rephrase
We are using Standard PP/WM integration to stage materials from warehouse to production Bins.
We defined Material Staging Indicator as 4 [Manual Staging] in Control Cycle of materials [as business wishes to move materials manually from warehouse to production Bins]
How do we trigger Transfer requests[TR] creation to initiate movement of raw materials from warehouse to Production bins.
Do we need to create TRu2019s manually? If yes How [As I understand TR doesnu2019t allow to move more than one material at a time from one Bin to another]
When i go to Change production Order and select WM pick list I could see Requested quantity and confirmed Quantity column are not getting filled only requirement qty column has values. All columns are grayed.
Can we have few materials manually staged and few via Staging indicator option 1 pick parts? so that all critical parts will be moved manually and others SAP to create TRu2019s automatically
PLEASE HELP

Control cycle mass creation with staging indicator 4

Hi All,
Is there any way to create control cycles in mass for staging indicator other than 3 - rel order parts?

You can define a generic control cycle for manual staging parts and it will be valid for parts w/o control cycle. Please read SAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841494afa11d182b90000e829fbfe/frameset.htm
For manual staging, you can define one control cycle per production supply area for all materials. This control cycle is then valid for all the materials in the production supply area, for which you have not defined an individual control cycle.
If you want other mass cration / change tool, you have to develop it on your own.
Edited by: Csaba Szommer on Dec 13, 2011 9:59 PM

SNC Kanban Issue - Control Cycle Master Data

Hi,
We are testing the SNC Kanban scenario with contracts (PO) between ECC & SNC.
We have created a control cycle for the ECC material and have sent the Master Data to SNC. We are now trying to send over the control cycle info to SNC and are getting hte following message when we run KANBAN_MD_TRANSMIT:
"Kanban control cycle 70666: No address data available; processing terminated"
Any suggestions would be appreciated.
regards.

Hi Anjan Bellur
As per the error message, the address details for your supply area are not maintained
Kindly go to the transaction PK05 in r/3 system
For your plant and Production supply area, Shift+F5
Maintain the address details
Then the reported error message will not appear
Best Regards
Vinod

Control Cycle information missing in COR2

Hi experts !
I encountered an issue in all client about reservations update with control cycle values for alternative items.
We use alternative items in a standard manufacturing BOM. (Strategy 1; probability of usage 100 % and 0 % for the others). These alternative items are WM managed and the control cycle are properly maintained.
When we create the process order, reservation items are created for all items (even for items with a required quantity to 0 which are the ones with probability usage 0 %) in RESB.
When releasing the process order, when the system is reading the control cycl information, only the reservation items with a required quantity different from 0 are updated with the WM info : Staging ind. (BERKZ) , Warehouse No (LGNUM), Storage Type (LGTYP), Storage Bin (LGPLA)
I could not find any customizing functions to manage reservations and control cycles.
I looked for a SAP notes but could not find ant soving our issue.
Do you have any solution to our issue ?
Regards and many thanks for your help...
Philippe

Dear,
Please refer the OSS Note 1136321 - COMAC: Double Transfer Requirements in WM Material Staging
Or you can raise the issue to SAP in that case.
Regards,
R.Brahmankar

Handling Unit Management and supply areas with WM/control cycles

Dear all,
has anyone come across the issue how to handle a replenishment process for production with supply area within WM and Handling Unit Management?
Normally a supply area is being staged via control cycles. in the supply area, all storage units get lost (standard functionality as far as I know). When we post the GI, the components will be taken out of the supply area, backflushing is not allowed as far as I know.
Now: what happens if HUM is switched on? Do we have to enter a HU for these GI's as well? Or does the supply area keep the information of the SU/HU? I want to avoid that the users have to tell the system the HU no. for every screw they take/consume...
Thanks & regards
Christian

Hi,
(as already described,)
it is possible to use handling unit management together with lean
warehouse management. You activate handling unit management independent
from storage unit management (that is only possible in case of full-WM
as far as I know).
Only in case if storage location is full-WM- AND HU-managed the storage
unit management is always active and HU numbers are taken over as SU
numbers. In all other cases HUM and SUM are independent from each other
and number ranges must be set a way that they are not overlapping.
Regards,
Ely

Control cycle for KANBAN.

I want to cosume componenets using my KANBAN BINS.
I maintained my supplying areas. and when coming to the control cycle. Do I have to maintain control cycle for each component that I use in maufacturing against each supply area? or is it only for FERTS

Hi,
1. When you tell consume compoenents means you are talking about Goods issue.
2. Kanban needs to be done for a Inhouse prodcued material or externall procured material
3. In both cases it does a Goods receipt and relevant goods issue posting.
4. so if you only need to do consumption it is not possible.
5. Genearlly it can be maitained for the FERT or halbs which has bom, routing releavent master data
6.For the inhouse manufacture kanban below is the highlevel step
7. and wehen you do status cahnges like full to empty a planned order or prod order will be created.
8. when you change status empty to ful then GR will be posted and GI will be done immediatelly ( based on the control cycle)
9. Kindly refer the attached link for further details.
[KANBAN|http://sap-pphelp.blogspot.com/2010/01/kanban-inhouse-production.html]
also let me know if you have any specific querry
Reg
dsk

Create KANBAN control cycle (PK01) via LSMW

Hi,
Anybody perofrmed control cycle creation via LSMW using BAPI or IDOC method? I need to know the Business object (BAPI method) or Message type for IDOC menthod in LSMW for PK01 tcode.
Thanks.

you should enable the F4 search help in your LSMW.
I have it active and found Idoc PKHD5

BAPI /FM to create /change KANBAN control cycle

Hi
Is there any BAPI or FM to create or Change control cycle?
Thanks.

Check
BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
Short Text
    Create Event-Driven KANBAN for Control Cycle
Functionality
    With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
    The essential entry parameters are:
    o   Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
    o   Material quantity
    Information about the status change is issued.
    COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
    the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
Hope this helps.
Regards
Vinayak

Issue in Creation of XML file from ABAP data

Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
   - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
          <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
          <Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
           <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
      </Header2>
   </Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

Issue In Creation Licence.

Dear All,
I got The Issue In Creation of License as " Enter valid SP/SH ".
Even I have Maintained Prefix Zeros.
Here SP and SH both are Different, If I enter SP and SH as same system accepts, if not error is triggered.
Both SP and SH maintained Customer Excise details.
Please give me your suggestions.
Regards,
Siva krishna B
<Text removed by Moderator for sharing personal details>
Message was edited by: Jyoti Prakash

Hi
Assign Ship to party code to the Corresponding Sold to party in customer master under Partner function Tab
and Create the New License then system will accept

Issue in creation of control cycle

Similar Messages

Maybe you are looking for