Issue in CRM Delta upload to BW

Hi,
I need to configure the exchange of data between CRM 7.0 and BI 7.0. I am facing facing issue of Delta upload from CRM to BI. Initial upload to BI was successful but not working Delta. I need to download the activity and the opportunity. But in transaction RSA7 the delta queue displays 0 records for 0CRM_SALES_ACT_1, 0CRM_SALES_ACT_I, 0CRM_OPPT_H and 0CRM_OPPT_I. It's status is green. In the transaction SMW01 this BDoc red in an error state with the text "Could not determine module name: BUS_TRANSACTION_MESSAGE GENKEY: REP_GET_RECIPIENT" and "Service that caused the error: SMOH_REPLICATION_WRAPPER_MSG".

Hi,
My scenario was delta was not getting loaded within BW ods and cube... Delta was getting captured from source system but it was not getting loaded from ODS--> ods/cube....
So i first deleted the data mart symbol from ODS (source) and then did the repeat delta...
Regards,
Anup

Similar Messages

  • Generic Datasource Delta upload Issue

    Hi all,
    I have created a Generic Datasource for Solution Manager ODS 0crm_process_srv_h which contains the userstatus, transaction number, transaction desc and GUID of CRM Order Object (ods key field),only these fields.
      I have taken transaction number as delta field and it is as timestamp. But delta upload is not happening. If I give GUID or Status also delta upload is not happening . Please suggest which is the best way to give to delta upload.
    Thanks and Regards,
    SGK.

    Hi,
    in your case you need to create a function module as a extractor. Create a extract structure as well and add a timestamp field (lets call it zdeltahelp) to be used as the delta relevant field of the datasource. After successful init the last extraction timestamp will be passed to the fm and you can start selecting all resb entries for orders created and/or changed from that time on as well as the ones deleted (but therefore you need to read the change documents as well). For more information about generic extraction using fm search the forum or check out my business card. There you will find a link to a weblog about that issue.
    regards
    Siggi

  • Filter Delta Upload from CRM into R3

    Hi SAP gurus,
    How can i set the filter for delta upload from CRM into R3? As far as i know, the filter settings in R3AC1 is only applicable for data exchange from the source system R3. What if i would like to filter the data where the source is CRM instead? Did i miss out anything in the configuration? I have been able to filter data coming from R3, but NOT data from CRM going into R3.
    Would appreciate your help on this.
    Thanks. Points will be rewarded.

    Do you set all req.customizing in tr smoeac?

  • Difference between initial upload & delta upload.

    Hi experts,
    Please tell me the difference between Initial upload & delta upload.
    please tell me the characteritics of each upload.
    Thanks & Regards
    prajith P

    Hello
    These 2 load are performed for the data loading in CRM from other SAP system like ECC. Initial download is the activity that to be performed when you want to download the master data 1st time.
    Delta load is performed automatically if we make any change in the master data records.
    For the more depth knowledge you can go through the below mentioned links.
    http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C03_CRM701_BB_ConfigGuide_EN_XX.doc
    Points can be issued if you found you answer.
    Thanks
    Karan

  • Delta Upload is happening but with 0 records

    Dear All,
    I have problem with delta upload, Intialize upload is happening but delta upload not picking the records but it is showing status as green but with 0 records eventhough the records are there in the source system.
    DataSource : 0CRM_SRV_PROCESS_H
    the delta type for the datasource is AIMD (After Images with Deletion ID Using Delta Queue).
    I am pulling data from Solution MANAGER.
    Please guide..
    Thanks,
    SGK.

    hi SGK,
    in crm, check bwa5 and bwa7 ?
    check oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction and go through following
    CRM Data source issue with Delta Load( For BW Gurus only)
    -> oss note 819570,871930,887724
    hope this helps.
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
    are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate these queues.
    In Transaction SMQ1 if there are Queues existing with
    names beginning with CRM_BWAn (n is number) then
    activate these queues in the same transaction.
    4.a)If required activate the datasource
    Go to transaction BWA5 > select the required datasource and activate.
    4 b) The Delta may not be active ,activate the delta in BWA7 by selecting the name of the datsource and pressing the candle icon for 'activate delta'.
    5. In BW system
    Go to transaction RSA1 > modeling > infosources > select the infosource > right mouse click on the selected
    infosource > choose option replicate datasource
    Activate the infosource.
    6. Go to the scheduler for the infosource > select delta in the update >choose the option PSA only (in the Processing tab)
    > start immediately
    Check the entry in the RSA7 in the OLTP(CRM system)

  • Delta uploading job get cancelled in SAP R/3

    question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
    Pls advise!
    Many Thanks!
    rajatina.

    Hi,
    If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
    You can request repeat delta multiple times without any issue.
    Regards,
    Durgesh.

  • RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

    Dear Professionals,
    I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

    Hi,
    Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
    MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
    It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
    Check also these SAP Notes:
    869628     Constant WAITUPDA in SMQ1 and performance optimization
    728687     Delta queued: No data in RSA7
    527481     tRFC or qRFC calls are not processed
    739863    Repairing data in BW
    Rgds,
    Colum

  • After deletion ODS change log, Delta upload OK?

    Hi all,
    Now I am reducing data from BW server. For this purpose, I will delete ODS change log. Both of data "from ODS" and "to ODS" are uploaded by Delta Upload.
    If I delete change log after last delta initialization, is there any problem to next delta upload?
    For example, the last delta initializing was done April 1. And I delete the change log up to April 30. After this operation, can be expected any problem to Delta upload?
    Bamboo Shampoo

    I dont think it will cause any issue with next delta loads.
    Data goes from ODS to its targets from change log table.
    But I think better have strategy like..'delete change log data only for requests older than say...1 month or 2 months..'
    so that if u have problems with recent data loads..u can reload easily..
    u can also try cleaning up old requests from the PSA tables in the system..
    cheers,
    Vishvesh

  • LO Extraction - error in delta upload

    Hi,
    I try to do some delta upload. The delta initialization works fine. I run OLI8BW and created an InfoPackage for delta initialization.
    Now I have problems with the delta upload. I selected update method 'queued delta' in LBWE and run the job. If I try to start the loading via InfoPackage (delta upload) an error occurs. In RSA7 I can see the delta's, but there is nothing in LBWQ. The error message in the BW monitor is the following: 'Transfer structure field not contained in DataSource'. There is one field in Transfer structure, which isn't contained in data source, but I fill it via a routine. Any ideas what the problem could be?
    Thanks a lot.
    Gabi

    hi,
    check sap oss note
    881207
    Symptom
    You load data in Delta mode and the system issues error message R3 037 in the monitor:
    Transfer structure field not contained in DataSource.
    Note 868059 did not deliver a complete correction.
    In Delta requests or repeat requests that contain time-dependent selections, these time dependencies are always transferred to the source system with the 'DATETO' and 'DATEFROM' field names.
    Time selections are also transferred to the source system if the time-based fields are not known as selectable fields in the DataSource.
    Other terms
    Scheduler, Update tabstrip, repeat, DATETO, DATEFROM,
    Delta, Init, date selection, InfoPackage, selection, M, X, 1. R3 037
    Reason and Prerequisites
    The problem is caused by a program error.
    You have implemented Note 868059 as an advance correction or you have imported it using a Support Package.
    Solution
    BW 3.0B
               Import Support Package 29 for 3.0B (BW3. 0B Patch 29 or SAPKW30B29) into your BW system. The Support Package is available when Note 0783251 "SAPBWNews BW3.0B Support Package 29", which describes this Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 23 for 3.10 (BW3. 10 Patch 23 or SAPKW31023) into your BW system. The Support Package is available when Note 0783253 "SAPBWNews BW3.1 Content Support Package 23", which describes this Support Package in more detail, is released for customers.
    BW 3.50
               Import Support Package 15 for 3.5 (BW3.50 Patch 15 or SAPKW35015) into your BW system. The Support Package is available, when Note 0836440 "SAPBWNews BW Support Package 15 NetWeaver'04 Stack 15", which describes this Support Package in more detail, is released for customers.
    BW 7.0
               Import Support Package 05 for 7.0 (BW7.0 Patch 05 or SAPKW70005) into your BW system. The Support Package is available, when Note 0829625 "SAPBWNews BW 7.0 Support Package 05", which describes this Support Package in more detail, is released for customers.
    To provide advance information, the notes mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".

  • Delta upload in different times and targets

    Dear BW Gurus,
    I have to fill a Master Data table with a delta (for performance reasons) from an ODS object, and later fill an InfoCube with the same delta from the same ODS Object. This two step approach is necessary because the Cube uses the Master Data filled in the first step - so I cannot do the two uploads within the same InfoPackage.
    My approach was the following in a Process Chain:
    1. Fill and activate "source ODS"
    2. Load request from "source ODS" to PSA only
    3. Update Material Master from PSA using "Read PSA and Update Data Target" process with the variant setting the PSA table and the Master Data InfoObject as Data Target.
    4. Run "Attribute Change" process for the Master Data IO
    5. Update InfoCube from the same PSA that was used for the Master Data InfoObject. This is also a "Read PSA and Update Data Target" process with the variant setting the same PSA table as before and now the InfoCube as the Data Target.
    To me this seemed logical but when I run the Process Chain I got the following error message at point 3 (update Master Data from PSA): "No request for posting found in the variant".
    This appears strange to me because if I specified the request, it would only work for the first upload and not for all the others.
    Can anyone please help me how to overcome this issue of Delta upload in different times and targets?
    Thanks in advance,
    Attila

    Gopi,
    If I create two delta InfoPackages, the first one clears the delta queue, so the second InfoPackage won't find any data. This is unfortunately not the way to do...
    Srini,
    Your proposal is quite original - if I upload the same ODS with its data (amended by the date field) that would in fact generate a new delta for the same ODS.
    However, in the meantime a more simple idea came up in our BW team, inspired by your proposal. For the uploading of the Master Data I now don't use the delta functionality of the ODS export Data Source, but instead I set up a full upload filtered for the actual date. This ensures the good performance of Master Data load (load time will not increase with time) and also we will have all recent Master Data uploaded from the ODS because that load is in the same Process Chain where the "Source ODS" is updated. Later in the same Process Chain I simply start the delta upload for the Cube.
    Thanks a lot for all your help.
    Attila
    P.s. I will be out of office for until 24th July.

  • Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has statu

    Hi All,
    i am loading trx data.but load was failed.failed request is showing " Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has status Ended with errors (instance REQU_4B9BAQK7NIXFRH9RKD0VF5LWP). why this error is comimg frequentely.i want to know the reason and how can i solve this issue? please help me.
    Thanks,
    Turan

    Hi Turan,
    Can you send the details error from DETAILS tab ?see all the process levels like Requsets,Extraction,Transfer& processing .
    Regards
    Pcrao.

  • Delta Upload request from ODS is not including the Data target of planning

    Hi,
    I have a process chain in which there is a delta upload from ODS to 3 different data target.  One of the data target is the planning cube. last 2days back i have changed the process chain schedule after was the Delta request is not hapenning for Planning cube.  The process chain contains the changing the planning to load mode and load to planning mode.  Every thing is working fine but the Delta is not happening for the Planning cube.  Delta request are going correctly to the Other 2 data targets.  Now it was like Delta has excluded the Planning cube.  Another this there is nto planning package is appearing in the Infousources.  and when I am trying to upload manually from ODS to Data targets it say that No delta is there.  Please help me in this.  This is a production problem.   I have checked all the data monitors every thing is from but no delta is hapenning for the planning cube.   
    Thanks
    Naveen.

    Resolved

  • TCode in CRM to upload a file

    Is there any tcode in crm to upload a file in application server
    for example in R/3 we have CG3Z
    is there any way
    Please i need only Transaction code

    You can make your own custom code with following simple code:-
      CALL FUNCTION 'C13Z_FRONT_END_TO_APPL'
           EXCEPTIONS
                OTHERS  = 1.
    -Dhirendra

  • Delta Upload for Flat File

    Hello Everyone
    i am srikanth. i would like to know wheather do we have a facility for Delta Upload for flat file. If yes can u please give me the steps.
    thanks in advance
    srikanth

    Hi Sabrina...thank you for ur help...i did load the data from cube to ods
    steps.
    1. i generated export data source on the cube
    2. i found the name of the cube with prefix 8<infocube name> in the infosource under DM application component.
    3. there are already communication structure and transfer rules activated but when i am creating update rules for the ods..i am getting the message 0recordmode missing in the infosource.
    4. so i went to infosource and added 0recordmode in communication structure and activated but the transfer rules in yellow colour..there was no object assigned to 0recordmode but still i activated.
    5.again i went to ods and created update rules and activated (tis time i didnt get any message about 0recordmode).
    6.i created infopackage and loaded.
    a)Now my question is without green signal in the transfer rule how data populated into the ods and in your answer you mentioned to create communication structure and transfer rules where in i didnt do anything.
    b) will i b facing any problem if i keep loading the data into the ods from cube (in yellow signal) ..is it a correct procedure..plz correct me..thanks in advance

  • Routine,delta upload

    Hi experts,
    i am new to bw and sdn .
    can u answer for my questions ,i was asked in my interview.
    1)what is the scenario of start routine?
    2)how to generate a report for present year and previous three years?
    3)what is the mechanism behind  delta upload?
    thanks in advance
    regards
    krisna

    Hi Krishna,
    1) Start Routine - Start routine is executed prior to executing of transfer rules, so if there is any global variable to be used in all transfer rules then it is better to declare that in start routine.
    After start routine execution is over then transfer rules r executed.
    Start routine are at two levels
    1. update roule
    2. transfer rules
    start routine is processed once per data package load .For ex : you want to eliminate a set of records based on dome criteria you can do that with start routine . But update rules or transfer rules are processed once per data record where you can manipulate each single record .
    There is an internal table called data_package which will have all the data available for processing you can later store all the data in another internal table (you can declare) which can later be used in update rules .
    3) Delta Upload Mechanism - Regarding the Delta upload mechanism, it's simply the mechanism that helps updating only the changed data, and not the full update. The field 0RECORDMODE determines whether the records are added to or overwritten. It determines how a record is updated in the delta process: A blank character signifies an after image, ‘X’ a before image, ‘D’ deletes the record and ‘R’ means a reverse image.
    You can check following link for details.
    http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Regards,
    Ashish.

Maybe you are looking for