Issue in customized help menu

Hi,
There is a requirement to customize the help menu in standard SAP menu bar. For that I have created a function code in se41 in MENUSYST and status MEN and taken function code type as 'T'. Also created a Z transaction code with a program to call a intranet URL attached to it.
Now the issue is whenever I click on the option in the help menu from some other screen (se38 or se11) apart from start screen S000. The browser starts and the web page is opened but the screen always resets to SAP intial screen(S000).
Can anyone suggest whether the function code type needs to be changed or is there any other issue.
Regards,
Aparna

As explained in the field help, T corresponds to LEAVE TO TRANSACTION, so what happens is normal (note: you can see that menu item System | Utilities | Authorization check behaves as yours).
As I could see in the forum, what you need to do is to choose function type H (help), and modify standard function module HELP_START.

Similar Messages

Help menu / Adobe CS

Has anyone had issues accessing the help menu options in Adobe Photoshop CS with Leopard? When I access the help menu, all options are greyed out and the only active option is to type in Leopard's new help search. Of course it doesn't search Adobe's help files, but it searches menu items in Photoshop. Is there any way to activate help menu options other than this pesky menu search in Leopard? Anyone have a similar issue?

I am having a similar problem. Did you figure out a solution yet?

HT1770 I am setting up new Seagate GOFlex Pro for Mac for Time Machine. Backup stops at 45.2MB. A customer service of the Seagate said it is Apple's issue. Please help! Shuichi

Backup stops at 45.2MB. A customer service says that it is Apple's issue. Please help. Shuichi

Event store UUIDs don't match naming your internal HD or any other drive/partition being backed-up. Time Machine can't be sure the OSX internal log of file changes that it normally uses is correct.
This happens in the following circumstances:
•The first backup of a disk, or to a new location
•After booting from your install disc, Recovery HD, or a different OSX volume (usually)
•A full restore
•Certain hardware repairs (e.g., new internal disk or logic board)
•Removal of large exclusions
•A very large volume of changes (especially an OSX update)
•An improper shutdown of your Mac, or improper disconnection or power loss on the Time Machine drive
•If it's an external HD, an improper shutdown or disconnection of the drive
•A failed or cancelled backup
•Many days without a backup
It usually causes a lengthy deep scan/traversal (below), so if you see it frequently, you need to figure out why it's happening.
http://pondini.org/TM/A6.html
Might also have a look at...
/Library/Logs/CrashReporter/backupd_2013-11-15-164711_NAME-nokonpyuta-2.crash

When I try to use Mac Help or any other help menu, the help window opens up but it is empty. How do I resolve this issue?

When I try to use Mac Help or any other help menu, the help window opens up but it is empty. How do I resolve this issue?

Try moving these files to the Trash one at a time and test (but don't empty yet.)
/Users/yourusername/Library/Preferences/com.apple.helpviewer.plist
/Users/yourusername/Library/Preferences/com.apple.helpviewer.LSSharedFileList.pl ist
If doing this doesn't help, then navigate to this location and delete the cache (but not the enclosing folder.)
/Users/yourusername/Library/Caches/com.apple.helpviewer
All are located in your home folder Library.

Help menu issue

"Help" doesn't work on my Mac. That is, from the finder I click on the Help menu item, the window starts to load, but then it quits without opening.
I have recently upgraded to Leopard from Tiger 10.4.11
thanks
Lisa

Go to the /Home/Library/Preferences/ folder and delete these files:
com.apple.help.plist
com.apple.helpviewer.plist
If you also see com.apple.helpui.plist delete that too.
Then navigate to /Home/Library/Caches/ folder and look for a folder named com.apple.helpui. If you find it then delete it as well.

Technical issues with update function in help menu

This is likely not the correct place, but I was not able to ascertain where I should ask this. I have the full CS6 suite, and am unable to get anything to happen when I attempt to use the update function within the help menu of any of the programs in the suite. I have even tried to use the update program that came with the suite, but still nothing works. When in the programs, I click the link listed as "updates" and nothing happens what so ever. This is a common occurance regardless of the specific program.
My system specs:
Athlon X6 CPU
16Gb ram
Radeon HD 6950 2Gb
ASrock extreme 3 mb
Hard drive is a pair of seagate 500Gb drives in RAID0 array
OS is Windows 7 Pro 64bit
Current version showing in Photoshop and Illustrator is 13.0.1

Notice where it says
"No update override. If there is no UpdateOverride the Mediator simply propagates the changes to the underlying data sources. "
That's what you want. Want to see it work? "import metadata" for a database table. Open the data service that is created. Execute the function with the same name as the table. Click on the "Edit" button, change some data, click on Submit. You've done it. Re-execute the function with the same name as the table to see the modified data.
And it doesn't stop there - you can build logical data services on top of that physical data services, and when you update data in the logical data service, the changes will be propagated to the underlying physical data services.
is it possible to create a Data Service that performs updates, and make it available for ALSB as a Web Service, like the get methods it already creates?Well, this is a different question now. Yes it is possible, please read : http://e-docs.bea.com/aldsp/docs25/appdev/alsb_support.html

Interactive Report - Add a 'custom' Action Menu Item

Hi,
I'm wondering if it is possible to add 'custom' Action menu items to an interactive report?
I have a situation where I want to use all the richness that an interactive report gives with it's out of the box functionality, then if a download is selected I need to be able to set a 'lock' on the currently selected records set before the records are downloaded.
I've had a good look around the forum and various other sites and I can't seem to find anything in this area. The nearest I can find is on the OBD tutorials the ability to add a 'Reset' button.
I know how to create custom download functionality, to which I could add the required record locking functionality and in turn link to a button, but what I don't know how to do is pull out the selection variables from the Interactive Report in order to construct my select query.
Maybe I'm barking up the wrong tree and there's a better way if so any suggestions would be most welcome.
Many thanks in advance Peter..
Edited by: Pete on Jun 30, 2011 4:16 PM
Edited by: Pete on Jun 30, 2011 4:24 PM
Edited by: Pete on Jun 30, 2011 4:31 PM

Hi,
For your issue, in SharePoint Designer, Click Custom Action->View Ribbon->Create Custom Action.
Then the extra form will show up in the Ribbon.
Refer to the following link:
http://www.abelsolutions.com/totm/creating-a-custom-action-in-2-steps-with-sharepoint-designer/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

InDesign CS3 Help Menu opens constantly

The InDesign CS3 Help Menu opens constantly every time I click anywhere in a document to do anything.
Such as draw a box, insert type, anything. It virtually renders the program unuseable. I click to make an addition to a doc, travel up to the help menu to close it, do my thing, then repeat for the next action. Reinstalling has not stopped this. I cannot disable the Help Menu (which would be a fine solution BTW). I cannot afford to upgrade to CS4 right now. I am not sure that would stop it anyway. Photoshop, Illustrator, no other program in the CS3 suite exhibits this behavior. Anybody got any ideas? I recently recreated my whole OS and all programs on a new hard drive out of necessity. InDesign was doing this before that rebuild, and it does it now (after the reinstall). CS3 was reinstalled clean. That did solve a serial # issue with Acrobat where it wouldn't launch. I didn't transfer anything from the old hard drive except e-mail and internet settings.
Mac Pro Quad
Leopard 10.5.7
4 gigs ram
2 terrabytes internal hard drive space (four drives).
Thanks for any help in advance, I appreciate your time.
Michael

Are you using the default keyboard shortcut set or a custom one? Also, are you using any special mouse, keyboard or tablet input devices?
Try going to Edit->Keyboard Shortcuts->Help menu Product Area and see what the default Help shortcut is. Perhaps it has been set to something crazy like "mouse click". You may just set the Keyboard Shortcuts back to [Default] set and see if that does the trick too.
Alternatively, something either software or hardware related in your setup is frequently triggering that event, which may be the case if you have a non-apple kbd, mouse etc installed.

Using the Microsoft help icon (?) in a customised tab integrated in the help menu

I am using the Visual Studio and customizing it for my company. I want to use their help icon in a tab in the help menu which is personalized and integrated with the Visual studio build. I am unable to find the image (?) used. Can anyone help me in locating
the image and how to reference it so that I can use it for my integrated menu.

Hi Emon205,
The real issue is that which VS version you were using.
For the VS2010, it has the VS2010ImageLibrary.zip. This file is typically installed in … \Microsoft Visual Studio 10.0\Common7\VS2010ImageLibrary\1033\.
Please Extract All for this zip file, and then follow the directions to extract the images.
You could get the help image here:
...\VS2010ImageLibrary\_Common Elements\Objects
But like VS2013, as James's suggestion, you would download it by yourself.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft office Prpfessional 2010 plus, Help menu

Hi, when I click on the ?(Help Menu), it prompt me to reconfigure and reboot and help menu still does not work. Please advice

Hi,
Does the issue occur when you go to File -> Help ? Same issue exists on all Office products? Like Outlook, Word, Excel?
I suggest you do the following steps:
1.    Click Computer->C-DRIVE(C:)-> program data.
2.    Right click on Microsoft help and rename it to Microsoft help.old.
3.    Click Start again and go to control Panel->programs->programs and features.
4.    Click on Microsoft Office 2010 and click change.
5.    Select repair.
6.    Once the repair is complete open any Microsoft Office application and check if the help feature works.
Regards.
Melon Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Selecting a custom runtime menu makes it so that the VI cannot be saved

Whenever i try to save a VI with a custom runtime menu i get the attached 2 errors, oneter the other. This is using Labview 2014. any help would be much appreciated. Ther is of course not any invalid characters in the file name i am using.
Richard
Solved!
Go to Solution.

That's pretty much the same what i did, except i used a blank VI. Can you verify if the issue is connected to EVERY VI on your machine or connected to specific ones?
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Error while creating iViews after implementing custom hover menu in NW 7.3

Dear Experts,
We recently implemented a customized hover menu in Portal 7.3. Since then while creating an iView we are getting the following error :
java.net.MalformedURLException: Illegal character in query at index 1023: /irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fcom.sap.pct%2Fadmin.templates%2Fiviews%2Fcom.sap.portal.adminStudioRedirector&iview_mode=default&isEmbedded=false&workUnitIndex=0&oClass=com.sapportals.portal.iview&PagePath=pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.portal.wd_portal_content&SerWinIdString=&tabID=Tab054b1825_40f6_11e1_8169_00000ace34a2&workUnit=pcd%3Aportal_content%2Fcom.sap.pct%2Fadmin.templates%2Fiviews%2Feditors%2Fcom.sap.portal.appintegratorWizard&com.sap.portal.reserved.cnfgurl=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.wd_portal_content%2Fcom.sap.portal.admin.studio.configuration&ComponentType=com.sapportals.portal.iview&NavigationTarget=navurl://e9d5d97dd3e55c9763a4973a016a3cc6&where=pcd%3Aportal_content&TarTitle=Portal Content Management&NavMode=0&sessionID=1326796101929&PrevNavTarget=navurl://032ac1f471768f5a16cac8e152546fd3&objectID=pcd%3Aportal_content&HistoryMode=1&com.sap.portal.reserved.wd.pb.restart=false&what=portal_content/templates/iviews/sap_bi7x_report_iview&workUnitUniqueId=054b1824-40f6-11e1-81f7-00000ace34a2&editorID=Tab054b1825_40f6_11e1_8169_00000ace34a2&displayName=New+iView&ClientWindowID=WID1326795999656
The error persists for all iView templates. Please provide your inputs.
Best Regards
Gaurang Dayal

Hi Gaurang Dayal,
The problematic part is the (first) space character within the parameter
TarTitle=Portal Content Management
You'd have to examine why this is not escaped.
Hope it helps
Detlev

Issue in Custome FM of Characteristic Value

Hi All,
I have created Custom FM for possible values of Characteristic.
Its working fine in all transaction except CU60.
In Cu60 Transaction if user click on F4 for characteristic value My custom help popup is coming. when user select any of the value its populating in table maintenance. But Issue the issue is when user is saving those value those value are not saving in table maintenance.
Please tell me if I need to do any addition stuff.
I have created FM using below SAP Doc.
Function Module for Checking Values
In this field, you can enter the name of a function module for checking characteristic values entered by the user. The function module can be created in any function group.
The following restrictions apply:
The function module must use the standardized interface.
The function module name cannot have more than 27 characters.
This allows names to be inferred for further function modules: for the possible entries on the value assignment screen, and for copying language-dependent value descriptions:
Function module for possible entries
<function module for value check> + suffix "_F4"
Function module for language-dependent value descriptions
<function module for value check> + suffix "_DC"
Interface for Function Module for Checking Values
Import Parameters:
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
VALUE LIKE CAWN-ATWRT Value to be checked
Exceptions:
NOT_FOUND Value not found
Interface for Function Module for Possible Entries
Import Parameters:
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
DISPLAY Display values only,
 if DISPLAY = 'X'
ADDITIONAL_VALUES LIKE CABN-ATSON Additional values allowed
 if ADDITIONAL_VALUES = 'X'
 (if you want the possible
 entries dialog box to contain an
 additional line for entry)
MULTIPLE_VALUES LIKE RCTMV-ATLIS Multiple values allowed
LANGUAGE LIKE SY-LANGU Language indicator
DISPLAY_WITH_LANGUAGE Display value with description
Tables
VALUES LIKE RCTVALUES Selected values
 When you call this table, it
 contains existing values.
 Deleted values have status 'D'
 in the table.
 New values have status 'I'
 in the table.
The function module must also let you display and select values using the possible entries pushbutton. To display possible entries, you can use function modules in function group SHL3, such as HELP_VALUES_GET_WITH_TABLE_EXT. The content is described in the function module documentation.
Interface for Function Module for Language-Dependent Value Descriptions
Import parameters
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
VALUE LIKE CAWN-ATWRT Value to be checked
LANGUAGE LIKE SY-LANGU System language
Exceptions
NOT_FOUND Value not found
If you use this function module after the function module for checking values, the language-dependent description of the value is copied to the value assignment screen.
Note
Please note that the program code must be based on the predefined interfaces. If your program is not based on these interfaces, the program may terminate with a short dump.
Please note also that the function module cannot take into account any restrictions on allowed values that are due to inheritance or object dependencies, because the function can only read data that is already saved to database tables. The function cannot read current user entries.

I have Created two FM Function Module for Checking Values and Function Module for Possible Entries

Creation of Custom context menu in CL_GUI_TEXTEDIT

Hello all,
I need to develop a custom context menu in the Text Editor.
I am using the CONTEXT_MENU event of the class
CL_GUI_TEXTEDIT for the same.
It is giving a short dump with an exception 'empty_obj' in the method
CL_CTXMNU_MGR=>CREATE_PROXY.
Please help.

Hello Tejas
The following sample report ZUS_SDN_TEXTEDIT_CTXMENU shows how to trigger context menus in text editor. Please note that the editor must be set enabled.
If you inactivate subroutine SET_REGISTERED_EVENTS the new context menu function will no be displayed. Thus you need to register the event for context menu handling.
*& Report ZUS_SDN_TEXTEDIT_CTXMENU
*& Flow logic of screen 100.
* PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
* PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
REPORT ZUS_SDN_TEXTEDIT_CTXMENU.
TYPE-POOLS: cntl. " Types for Controls
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_textedit TYPE REF TO cl_gui_textedit,
gd_name TYPE thead-tdname,
gs_header TYPE thead,
gd_langu TYPE thead-tdspras,
gt_lines TYPE STANDARD TABLE OF tline.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_context_menu
 FOR EVENT context_menu OF cl_gui_textedit
 IMPORTING
 menu
 sender,
 handle_ctxmenu_selected
 FOR EVENT context_menu_selected OF cl_gui_textedit
 IMPORTING
 fcode
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_context_menu.
 CALL METHOD menu->add_function
 EXPORTING
 fcode = 'MY_FUNC'
 text = 'My Function'
* ICON =
* FTYPE =
* DISABLED =
* HIDDEN =
* CHECKED =
* ACCELERATOR =
ENDMETHOD. "handle_context_menu
METHOD handle_ctxmenu_selected.
 CASE fcode.
 WHEN 'MY_FUNC'.
 MESSAGE 'My function selected from ctxmenu' TYPE 'I'.
 WHEN OTHERS.
 ENDCASE.
ENDMETHOD. "handle_ctxmenu_selected
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
PARAMETERS:
p_pspnr TYPE prps-pspnr.
START-OF-SELECTION.
* Get the text object
gs_header-tdid = 'LTXT'. " long text
gs_header-tdspras = syst-langu.
CONCATENATE syst-langu p_pspnr
 INTO gs_header-tdname.
gs_header-tdobject = 'PMS'.
CALL FUNCTION 'READ_TEXT'
 EXPORTING
* CLIENT = SY-MANDT
 id = gs_header-tdid
 language = gs_header-tdspras
 name = gs_header-tdname
 object = gs_header-tdobject
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
* IMPORTING
* HEADER =
 TABLES
 lines = gt_lines
 EXCEPTIONS
 id = 1
 language = 2
 name = 3
 not_found = 4
 object = 5
 reference_check = 6
 wrong_access_to_archive = 7
 OTHERS = 8.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Form SET_REGISTERED_EVENTS
* text
* --> p1 text
* <-- p2 text
FORM
set_registered_events .
* define local data
DATA:
 lt_events TYPE cntl_simple_events,
 ls_event TYPE cntl_simple_event.
TYPES: BEGIN OF cntl_simple_event,
 eventid TYPE i,
 appl_event TYPE c,
 END OF cntl_simple_event.
ls_event-eventid = cl_gui_textedit=>event_context_menu.
APPEND ls_event TO lt_events.
ls_event-eventid = cl_gui_textedit=>event_context_menu_selected.
APPEND ls_event TO lt_events.
CALL METHOD go_textedit->set_registered_events
 EXPORTING
 events = lt_events
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 illegal_event_combination = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SET_REGISTERED_EVENTS
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_0100'.
* SET TITLEBAR 'xxx'.
CLEAR: gd_okcode.
IF ( go_textedit IS NOT BOUND ).
 CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
* REPID =
* DYNNR =
* SIDE = DOCK_AT_LEFT
* EXTENSION = 50
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
 ratio = 90
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CREATE OBJECT go_textedit
 EXPORTING
* MAX_NUMBER_CHARS =
* STYLE = 0
 wordwrap_mode =
 c_textedit_control=>wordwrap_at_windowborder
* WORDWRAP_POSITION =
 wordwrap_to_linebreak_mode =
 c_textedit_control=>true
* FILEDROP_MODE = DROPFILE_EVENT_OFF
 parent = go_docking
* LIFETIME =
* NAME =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 gui_type_not_supported = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL METHOD go_textedit->set_text_as_r3table
 EXPORTING
 table = gt_lines
 EXCEPTIONS
 error_dp = 1
 error_dp_create = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL METHOD go_textedit->set_enable
 EXPORTING
 enable = cl_gui_cfw=>true
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
PERFORM set_registered_events.
SET HANDLER:
 lcl_eventhandler=>handle_context_menu FOR go_textedit,
 lcl_eventhandler=>handle_ctxmenu_selected FOR go_textedit.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
 WHEN 'BACK' OR
 'EXIT' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
Regards
Uwe

Apple kidnapped my Photoshop CS5 Help Menu

Hi,
I've taken a break from using my CS5 Photoshop program and was needing help editing text, so I clicked on "Help" like I did when I was taking a class in Photoshop last year. All the Help Menu brings up now are things related to my Apple computer. I know a call to Apple Care will result in something like, "We don't troubleshoot Adobe products," so I'm wondering if anybody knows where my Photoshop Help Menu topics disappeared to.
Did I only have them for a year? Did the Help Menu expire? Any help will be greatly appreciated.
Thank you!

No an actual solution for the issue, but you could just download the pdf-version.
http://help.adobe.com/en_US/photoshop/cs/using/photoshop_cs5_help.pdf

Issue in customized help menu

Similar Messages

Maybe you are looking for